Modeling a 1/2 inch PVC Pipe Elbow in Designspark Mechanical.

  Рет қаралды 2,276

Z-HUT

Z-HUT

Күн бұрын

Today we'll take a look at how to model a half inch PVC pipe elbow in designspark mechanical.
PVC Pipe & Fittings Sizes and Dimensions:
www.homestrato...

Пікірлер: 2
@cdunne1620
@cdunne1620 2 жыл бұрын
..very nice, seems an easy package to use, thanks very much
@jamesperry1555
@jamesperry1555 4 жыл бұрын
That’s so cool! Nice job!
Modeling a Vacuum Cleaner Attachment in Designspark Mechanical
10:27
Modeling a Vacuum Cleaner Attachment in Designspark Mechanical
Z-HUT
Рет қаралды 3,4 М.
180 Deg PVC elbow mold - Khuôn đúc khớp nối nhựa PVC 180 độ
7:08
180 Deg PVC elbow mold - Khuôn đúc khớp nối nhựa PVC 180 độ
ZF-Discovery
Рет қаралды 26 М.
It works #beatbox #tiktok
00:34
It works #beatbox #tiktok
BeatboxJCOP
Рет қаралды 41 МЛН
Mom Hack for Cooking Solo with a Little One! 🍳👶
00:15
Mom Hack for Cooking Solo with a Little One! 🍳👶
5-Minute Crafts HOUSE
Рет қаралды 23 МЛН
СКАНДАЛЬНЫЙ бой Али, когда в ринге ему противостояли сразу ДВОЕ #shorts
01:12
СКАНДАЛЬНЫЙ бой Али, когда в ринге ему противостояли сразу ДВОЕ #shorts
BalcevMMA_BOXING
Рет қаралды 1,2 МЛН
Қылмыскерді таптым… | QARGA 2 | 3 серия | КОНКУРС
31:30
Қылмыскерді таптым… | QARGA 2 | 3 серия | КОНКУРС
OMIR
Рет қаралды 594 М.
Making a Pipe with bends in DesignSpark Mechanical.
5:37
Making a Pipe with bends in DesignSpark Mechanical.
Jim Taylor
Рет қаралды 52 М.
2 Easy Methods To Make THREADS - Narrated Tutorial of 3D Modeling Using Designspark Mechanical #04
7:29
2 Easy Methods To Make THREADS - Narrated Tutorial of 3D Modeling Using Designspark Mechanical #04
W3DE Studio
Рет қаралды 15 М.
DesignSpark Mechanical #37 | 3D Modeling | Direct Modeling | Pull tool | Move tool |
3:41
DesignSpark Mechanical #37 | 3D Modeling | Direct Modeling | Pull tool | Move tool |
Armando Oliveira - Braga
Рет қаралды 1,5 М.
3D Pipe Tutorial With DesignSpark Mechanical
3:55
3D Pipe Tutorial With DesignSpark Mechanical
Mufasu CAD
Рет қаралды 4,2 М.
I built a FLAP ENGINE (New Rotary Design)
18:58
I built a FLAP ENGINE (New Rotary Design)
Integza
Рет қаралды 1,9 МЛН
Are 3D prints water tight?
5:39
Are 3D prints water tight?
3D Printer Academy
Рет қаралды 105 М.
Will these 3D printed tools actually work? 3D printing tools for welding & fabrication
9:49
Will these 3D printed tools actually work? 3D printing tools for welding & fabrication
TimWelds
Рет қаралды 68 М.
High Precision Speed Reducer Using Rope
20:19
High Precision Speed Reducer Using Rope
Aaed Musa
Рет қаралды 2,1 МЛН
Maker Pipe - Build Anything Out Of Inexpensive EMT Conduit - DIY Structural Pipe Fittings
3:01
Maker Pipe - Build Anything Out Of Inexpensive EMT Conduit - DIY Structural Pipe Fittings
Maker Pipe
Рет қаралды 68 М.
It works #beatbox #tiktok
00:34
It works #beatbox #tiktok
BeatboxJCOP
Рет қаралды 41 МЛН