In these videos, I'll show you how I created the carved table, from the beginning to the end. Continuation: • Modeling a carved tabl...
Пікірлер: 68
@amirmmohammadi76194 жыл бұрын
men i even dont know what youre saying in the video but your work speaks for itself. BIG LIKE
@forestlong17 жыл бұрын
Молодец! Настоящий неутомимый лепила! )))
@spartanka_kst Жыл бұрын
Спасибо вам большое). Вы вдохновляете).
@hamedtabatabaee99766 жыл бұрын
Perfect 👌 👌👌👌👌👌 i watch the whole carefully second by second and i really enjoy... i really appreciated 🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
@Kitsikoo7 жыл бұрын
Невероятная красота.
@TheLillianYoung6 жыл бұрын
I can't speak Russian, but this is beautiful. The only work that comes close that I have seen is on Simply Maya. Brilliant.
@Patallogus6665 жыл бұрын
Блин. Это божественнО!! =)))
@CryBlend7 жыл бұрын
Спасибо большое за отличный стрим
@0utstanding5 жыл бұрын
восхитительно
@spor077 жыл бұрын
Юрий спасибо за ваш труд, очень познавательно и по делу! есть небольшой комментарий, настройте микрофон, после перегрузки звука некоторое время очень плохо вас слышно, пока уровень записи не нормализуется...
@bearwolffish5 жыл бұрын
I thought you might be using Zmodeler, but no you just straight up painted a table. Very nice work, less workflow based and way more skilled based for sure.
@pathikbiswasvisualart5 жыл бұрын
Very helpful thanks.
@user-un4lw6ct2s2 жыл бұрын
классно!
@OrlovIV3 жыл бұрын
Если array делать с нажатой кнопкой lock pos (reset потом нажать не забыть) то деталь будет брать оси самой сцены.
@improvementTime10.3.175 жыл бұрын
3:55 start in zbrush
@chunwang98057 жыл бұрын
厉害厉害
@evertime85077 жыл бұрын
Спасибо.
@12jmlnv73 жыл бұрын
In Russia, Russian table models self portrait in zbrush.
@aleksandrruzin50437 жыл бұрын
Если бы еще список музыки, играющей в видео, приложил, то было бы ваще отлично
@mister13sud6 жыл бұрын
merci pour le tuto
@anushervonanushervon1382 Жыл бұрын
Вы использовали графический планшет или мышь 🐁?
@user-be8no7lx6c Жыл бұрын
Планшет
@anushervonanushervon1382 Жыл бұрын
@@user-be8no7lx6c планшет без экрана да ?
@truegeorg6 жыл бұрын
Регги на фоне доставляет )))
@nixadd33555 жыл бұрын
Love your work! I'd like to ask. What computer hardware are you using to sculpt in zbrush? Are you using a pen & tablet?
@user-be8no7lx6c5 жыл бұрын
Hi, I use Wacom Intuos 4 and Yiynova MVP22U
@nixadd33555 жыл бұрын
@@user-be8no7lx6c Awesome! Thank you so much! Keep up the amazing work!
@DanielWilker6 жыл бұрын
Vodka!!!
@treelemon39754 жыл бұрын
Very thanks your tutorial .but how did you set four stands by array mesh? I just tried that as your parameter, but it doesn't work like you did revolve four stands around axis.
@user-be8no7lx6c4 жыл бұрын
In ZBrush, the settings are selected in each new case different.
@Dulat19983 жыл бұрын
Здравствуйте можете подсказать после моделирование что нужно сделать для того чтобы сделать такои товар
@user-be8no7lx6c3 жыл бұрын
Привет, в кратце: 1- разделить модель на части 2- для каждой части (детали) создать управляющую программу, так называемый "G-код" 3- сделать заготовки под все детали 4- отфрезеровать на ЧПУ станке. 5- дорезать все места которые не смог обработать станок 6 - Собрать его в цельную конструкцию 7- Финишная дорезка и дошлифовка всех элементов 8- Покрытие лакокрасочными материалами 9- полировка
@jkl32017 жыл бұрын
Отличная работа! И просьба есть. Посоветуешь хорошие книги по орнаменту/резьбе? Например, которыми сам пользуешься.
@user-be8no7lx6c7 жыл бұрын
Привет! Если по технике резьбы, тут не посоветую, лучше всего пойти поработать пару лет в хорошую компанию, занимающуюся резьбой, как это сделал сам)) либо познакомиться с грамотным художником по резьбе или резчиком. Сам пользуюсь старыми книгами по резьбе, сборниками резьбы, набросками, или просто фотками изделий. Для того чтобы в голове сформировалась база объёмов и различных техник исполнения элементов.
@EJtheArtist6 жыл бұрын
Здравствуй! Прекрасная работа! Как вы получили это меню, которое появляется с симметрией? Я предполагаю, что это пользовательское меню для правого клика? (извините, если мой русский плохой, я использую google translate) Hi! Beautiful work! Please how did you get that menu that pops up with symmetry? I assume its a custom right click menu? (sorry if my russian is bad i'm using google translate)
@user-be8no7lx6c6 жыл бұрын
Hello, thank you! Google coped well with the translation), I almost believed that you know Russian. This is a custom menu, you can snap to any key. Here is a link to the lesson, I hope this will be useful. kzbin.info/www/bejne/kIqvqmusgJmBppY
@gomidasodabasioglu5 жыл бұрын
Where can I find this kind of pattern references/pictures or which words should I use ?
@bearwolffish5 жыл бұрын
Rococo
@erosangelos94227 жыл бұрын
Hello and thank you Yuriy for a great video Tutorial,,I like to learn either Zbrush or 3d coat but little confused and I like to know what do you recommend ,which one to get ,,they both look similar but price wise is different and there is other reasons too i guess. I appreciate if you can answer and love to hear before i buy , second question is what would you recommend about the pencil Tablets of better choice to buy ?)) thanks and I will appreciate your answer.
@user-be8no7lx6c7 жыл бұрын
Zbrush I like for sculpting, 3D Coat I like for texturing. Tablets, for me only Wacom. But it all depends on you!
@erosangelos94227 жыл бұрын
Thank you ,I appreciate your help thanks!
@erosangelos94227 жыл бұрын
hello , any suggestions which Wacom to buy for good results?,I see lots of Wacom tablets but I need your professional opinion as an Artist. thank you in advance )
@AwakeningAnimations7 жыл бұрын
Dont buy a software when you have to learn it and know nothing about it, rather try a trial or another way of using it while you study it and then buy it if you want to make money with it! Wacom is the industry best but there are many cheaper ones that work just as well like "Huion". Companies like this one try to make similar tablets than wacom fro a much more reasonable price! do some research on google:)
@user-be8no7lx6c7 жыл бұрын
I agree with Awakening Animations, for the beginning it's better to use trial versions of the software. Each has its own papeline and its own set of software. From the tablets I work for Yiynova MVP22U + PH and Wacom Intuos 4. Yiynova is a lot of inconvenience, I like Wacom. I concluded: if you earn on this and have at least a small opportunity, it is better to choose wacom cintiq
@compositingwithkushal6 жыл бұрын
How to make symmetry on all four stands of table?
@user-be8no7lx6c6 жыл бұрын
make symmetry> rotate 90> symmetry
@user-rb8ij5px9e Жыл бұрын
Вы говорите в начале видео, что болванку делаете в браше а доводите до ума в максе. Вы имели введу, что в максе делаете ретоп, дабы модель выглядела ровной и красивой?
@user-be8no7lx6c Жыл бұрын
Можно сказать и так!
@user-rb8ij5px9e Жыл бұрын
@@user-be8no7lx6c Могли бы мне записать обучающее видео с пояснениями своих действий процессе моделирования средней сложности ножки кабриоль и сколько это будет стоить? Дело в том, что сейчас пытаюсь изучать зибраш и мне нужен компетентный человек в данном вопросе.
@user-be8no7lx6c Жыл бұрын
@@user-rb8ij5px9eМогу записать процесс моделирования в 3DSMax, по цене можно либо вконтакте либо по почте пообщаться.
@user-rb8ij5px9e Жыл бұрын
@@user-be8no7lx6c Мне нужно именно в зибраше. Полигонами и сплайнами я итак могу замоделить ножку, но мне нужно освоить браш.
@user-be8no7lx6c Жыл бұрын
@@user-rb8ij5px9e В браше я только скульпчу, моделить мне там неудобно, поэтому я использую для моделирования другой софт.
@user-fc7xp5gq6n5 жыл бұрын
29:26
@ackmaster80503 жыл бұрын
only if i understood
@leon_idryabihin43937 жыл бұрын
Что играет на 25.00? Класс
@Provincialify5 жыл бұрын
А за сколько ушел столик? если не секрет)
@user-be8no7lx6c5 жыл бұрын
Приветствую не секрет, практически даром: первый вариант 9 т.р.))
@djancodewus84467 жыл бұрын
roses are red, violets are blue, when the title is in english the video should be to.
@user-be8no7lx6c7 жыл бұрын
Thank you, added to the title that the video with the Russian language!
@TheLillianYoung6 жыл бұрын
LOL!!!!
@NikolaGluvakov6 жыл бұрын
*too. Learn English.
@Sijeveux6 жыл бұрын
I wouldn't have found this great tut if the title was written in russian. I don't speak russian, however I understand images, so I can follow up. Title is perfect as is.
@petrovivan.petrov28916 жыл бұрын
почему не в МАКСЕ ? )
@user-be8no7lx6c6 жыл бұрын
Плохо моделю! не понимаю формы в полигонах!
@user-ou9px8uv8v4 жыл бұрын
а не большая ли детализация для вспомогательной модели. Мне кажется это много времени занимает
@user-be8no7lx6c4 жыл бұрын
Это когда как, иногда и общей формы достаточно, а иногда поточней формы подогнать хочется.