Removed a section in my camper where the entertainment area is and installed. Works great. Instead of propane furnace heat, I can use this kzbin.infoUgkxATHBlMJwipGgVWseuAFKvDQ_5R4_lywo to heat the camper as long as it's hooked up to shore power. Only thing I do not like is there does not seem to be a thermostat. I'm presuming it has a built-in one so it does not overheat. Really like all the other color options it has to offer.
@LandbergTileTV Жыл бұрын
Great!
@therockakaada61096 ай бұрын
❤️❤️❤️
@AnointedOne4God Жыл бұрын
well done. looks great. i’m hoping to update my fireplace this coming week.
@LandbergTileTV Жыл бұрын
Sounds great!
@dannydoyle87314 жыл бұрын
man, the mitered edge really makes it standout (and it's contoured to the baseboard molding! WHAT?!) ! I would've been perfectly happy with regular straight edges and not knowing what I've been missing, beautiful workmanship and attention to detail, and that beast of a tile saw.
@LandbergTileTV4 жыл бұрын
Thanks man, appreciate that!
@teh604 жыл бұрын
I need to do that to my fireplace. You guys are an excellent example of how it should be done. And that IQ saw is so cool, love it.
@lakeratatouille4 жыл бұрын
Nice job! I always listen to Joe Rogan when doing tile, DMT and spray paint. Lol but seriously I need that saw
@LandbergTileTV4 жыл бұрын
Haaha! DMT and spray paint, that's funny. We love this IQ more and more every project!
@blair3844 жыл бұрын
Looks awesome. Great job. Keep up the videos
@valkyriesardo2784 жыл бұрын
Good choice of materials for that space, very elegant results. The height of the mantle shelf looks a bit off, but its hard to tell without a wide view.
@SGRblink4 жыл бұрын
That`s fantastic .
@shoneycutt77674 жыл бұрын
I love how you mostly post videos of y’all just getting things done, instead of videos just dogging people’s work or showing the world how you know more than any other person on the planet.
@LandbergTileTV4 жыл бұрын
Thanks man, I like to show clips of the process, makes it that much better! and we never know more than others and are always learning! Thanks for the watch!
@jonathanrp084 жыл бұрын
Great job 💪👍
@yunjingstone41174 жыл бұрын
谢谢你的分享 ,你做的非常好!相信大家都很喜欢。
@CMA19673 жыл бұрын
I can imagine smelling the paint for an eternity especially underneath the glass.
@AlexGarcia-gy8hh2 жыл бұрын
Nice video brother 👍 love the modern look 👌 I have a question the holes on my gas line in my fireplace aren't centered can I center them myself or should I get professional help
@chrissimon84034 жыл бұрын
Beautiful job Bud!!
@juanmarin34704 жыл бұрын
Beautiful job!!!! 👌🏻👌🏻👌🏻
@jenal51853 жыл бұрын
Hi, looks so beautiful and modern. Can I do that on a regular non gas fireplace?
@lioneldeliz70532 жыл бұрын
@Landberg Tile TV Hi, great video. Please tell me where is the ignitor? I currently have a gas fake log no vent builder setup. Flip the switch on the wall, turn the RED gas valve on and push in the ignitor button 1 million times. How can I convert this to what you just did? Thank you in advance!
@davidkilpatrick36894 жыл бұрын
👍👍👍Smokin Sweet Job!
@jjbRX20159 ай бұрын
Looks awesome great work 👍 This is the next project on my list. Did you have any issues not using cement board or backer board for the stacked stone tile? Or did the dry wall hold up just fine ? Thanks again for your videos !
@LandbergTileTV9 ай бұрын
Drywall holds up great!
@damirpoljakovic15064 жыл бұрын
👍 Look great.
@cupofjotv81952 жыл бұрын
Great work, I do personally think it looks cleaner without the mantle. Feel like mantles are a trend dieing with barn house style
@futbol19723 жыл бұрын
I have a square fireplace with tile around it. I would like to know if I can make it rectangular that way I have more space avobe for my TV and maybe add a beam or a small mantle? I will also take tile down and update it. House was built in 2005. Will this be too expensive to change opening shape of fireplace?
@stephaniehigginsgarrett59983 жыл бұрын
Wow!
@waspsps4 жыл бұрын
Hi again. Like your videos. I noticed you mentioned to cut off the sharpie marks on the tile. I'd like to say that I'm using Pica pencil by Festool and it's a pretty good stuff. Works great for me. And for the regular pencils I use hanson pencil puller. I'd highly recommend those two products. I think you will like them. Very handy.
@LandbergTileTV4 жыл бұрын
Thanks for the info! Will definitely check out those pencils.
@error02094 жыл бұрын
Great job bro.
@LandbergTileTV4 жыл бұрын
Thanks brother!
@Heb1019224 жыл бұрын
Very nice. I was a little concerned when I saw the spray paint going on after the tile and stone were installed because of the potential of over spray. As always very nice work.
@moneymakingmikeg.95554 жыл бұрын
Great job as always Liggy, Liggy Landberg!! If I was the client I would of used remodel opportunity to add a raised hearth. It still did come out Dope though. Hoping all is well and Dirty Jersey out!!
@LandbergTileTV4 жыл бұрын
Thanks buddy! Great idea on the raised hearth, but what the client wants, the client gets. 👊
@moneymakingmikeg.95554 жыл бұрын
@@LandbergTileTV Yup, I know you have to do what client wants. I know we raised put hearth last min. before we installed fireplace & are sooo Happy we did. Hope all is well, Liggy,Liggy,Liggy Landberg!! Dirty Jersey out again!!
@AVHANDYMANPROFESIONALSERVICES4 жыл бұрын
Very nice job bro
@LandbergTileTV4 жыл бұрын
Thanks!
@drhertz87074 жыл бұрын
Great content, liked and subbed.
@LandbergTileTV4 жыл бұрын
Thanks for the sub!
@jenniferjahns40064 жыл бұрын
I have a gas starter wood burning. Your gas line looked just like what mine does. Would I have to add anything different to make it work this way? It's not electric, I turn the gas on with a key. This would be a great solution as I'd been looking at the log sets & the burners that come with them. This is much prettier and seems easy. Also my fireplace surround is that large varied stone from 1975. I want to cover it with something similar to what you used (the stacked stone). Would backer board covering the original stones work? This was a great video. I hope you or someone answers my questions!
@LandbergTileTV4 жыл бұрын
I don't believe backerboard is necessary. You can simply prime the brick, or skim over with thinset and let dry before installing tile.
@jenniferjahns40064 жыл бұрын
@@LandbergTileTV its a very uneven surface. I wish we could post pictures on here! I've gotten so much help from the KZbin community! Do you know anything about my question about the burner?
@runtskeart83523 жыл бұрын
@@jenniferjahns4006 I went to the fireplace store yesterday and bought a special pan for burning glass. The pipe is covered with a piece of sheet metal. Everything I saw on the net also said not to do this. It is dangerous as it can emit carbon monoxide into your home.
@erwinwalker18104 жыл бұрын
We call stacked stone split face mosaic in Scotland great job it can be a pain at times respect man
@LandbergTileTV4 жыл бұрын
Thanks man! Appreciate the comment.
@cclub13 жыл бұрын
Do we need to vent the fireplace for this setup?
@briansnyder94964 жыл бұрын
Did the thinset just hold the tile above the fireplace? Or was there a ledge for it to sit on?
@LIMBitlessOutdoors2 жыл бұрын
Great video and I plan to renovate my insert base off of your input. How much glass do you usually pour into the average insert?
@LandbergTileTV2 жыл бұрын
Personal preference on the amount of glass.
@flyby80492 жыл бұрын
What’s the name and color of that ledge stone? I’d like to use that
@nsavage653 жыл бұрын
I need to hire you to do my fireplace! Are you located near Memphis?
@ubaldolopez8240 Жыл бұрын
Was it stack un regular drywall I would like to know so I can do mines
@LandbergTileTV Жыл бұрын
Yes, not a problem stacking on drywall
@CopterJoe4 жыл бұрын
Would it be safe to use shiplap wood as a surround for a gas fireplace like this one?
@mvsstar59093 жыл бұрын
Where can I buy this fireplace mantle?
@jdj30424 жыл бұрын
What mortar did you use for the stone? I have used Mapei Ultraflex LFT an had bad luck now I just used PL Premium an works great
@LandbergTileTV4 жыл бұрын
We used Prolite for this project, it's sticky and worked out well!
@doyschie4 жыл бұрын
Hey is there a brick molding type of trim that you can get for fireplaces to do a picture frame around the opening? Then you can just butt the stone into it instead of seeing the cut edges?
@LandbergTileTV4 жыл бұрын
Usually the stacked quartz thickness is up to 3/4", hard to find something that thick for a picture frame trim/tile/stone material.
@MrLegendL21184 жыл бұрын
Clean Install! Are those the Glass Polish Stones you have on your amazon website that you use for sanding the porcelain tile edges?
@LandbergTileTV4 жыл бұрын
Thanks! and yes they are. Once you go diamond hand pad, you'll never go back to a rubbing stone. They last forever!
@pamelot91583 жыл бұрын
Will this work with any model of gas fireplace?
@LandbergTileTV3 жыл бұрын
I believe so
@maddenwigley33184 жыл бұрын
I hear that JRE experience playing
@irweezyy2 жыл бұрын
Is it too hot for a tv to be mounted above that?
@BrianWingard4 жыл бұрын
I really like this! What brand of stone are you using?
@LandbergTileTV4 жыл бұрын
Berkshire Buff ledger stone
@SpaceRanger98403 жыл бұрын
Phillip Rivers has a twin
@mj2764 жыл бұрын
This is excellent job. where do you buy the tile saw and how much is price? Also where did you buy your job pants? I like it
@LandbergTileTV4 жыл бұрын
Thanks! It's an IQ dustless tile saw and the pants are Snickers workwear.
@jennylu57983 жыл бұрын
You don’t need cement backer board?
@LandbergTileTV3 жыл бұрын
no
@bobcamacho5897 Жыл бұрын
The installation and choice of gas line was skipped? Why not an H-Burner?
@thebunnyluvr4 жыл бұрын
How does the fireplace keep a pilot flame lit if it's buried in the fire glass?
@LandbergTileTV4 жыл бұрын
This needs to be lit with a bbq lighter, but some have a switch to turn on the gas and pilots can remain running under the glass.
@toddcole3784 Жыл бұрын
I was told by fireplace store that I cannot cover burner with fireplace glass . I have to keep original logs. Is this true ?
@LandbergTileTV Жыл бұрын
negative
@joannegainen7833 жыл бұрын
Where is the mechanism you use to control the heat?
@reinaldoberrocales56313 жыл бұрын
That looks great! 👍 Do you glue straight to the painted drywall? I have a similar job to do and I'm not sure if I can do that. I'm just a DIY guy learning as I go.
@FD-dh2fu4 жыл бұрын
The stone went right on top of the drywall with lft mortar? I would have thought maybe add some hardibacker etc...
@LandbergTileTV4 жыл бұрын
We used Prolight and keyed in properly for the correct bond 👊
@FD-dh2fu4 жыл бұрын
Amazing JOB.
@imyourhuckleberry45474 жыл бұрын
@@LandbergTileTV can you educate me a bit on the prolight?
@tracyskyyhernandez58714 жыл бұрын
Does anyone know if you can put fire glass in a wood fire place?
@imyourhuckleberry45474 жыл бұрын
It will just get super dirty with the ash and smoke. Gas fire burns clean so glass is meant for that.
@rtcordero3 жыл бұрын
What would a remodel like this cost to have a contractor do it?
@apex0074 жыл бұрын
Were you using a fisheye or something? At 12:33 it looked like you were about to hit your head on the ceiling.
@LandbergTileTV4 жыл бұрын
Yeah, have the settings to linear on the gopro, but it still has a bit of fisheye. Thanks for the watch!
@acemastermatt4 жыл бұрын
Why kind of glue gun was that
@LandbergTileTV4 жыл бұрын
This is the glue gun we used: amzn.to/2udhkL4
@fatboyfatboy89374 жыл бұрын
What chu mean cutout your line???
@fatboyfatboy89374 жыл бұрын
Never mind I paused it lol
@timtru85113 жыл бұрын
Don’t need to back butter 🧈 stone
@adegap35294 жыл бұрын
sam seder
@LandbergTileTV4 жыл бұрын
Hell nah, can't even go debate with Tim Pool, come on man!