I would add masterlink pliers, caue those 12-speed links and almost imposible to open without a propper tool. Great vid as always Doddy :D
@dustinnoyfba72274 жыл бұрын
i can do it with a shoelace.
@smashyrashy4 жыл бұрын
@@dustinnoyfba7227 arent you fucking brilliant
@dustinnoyfba72274 жыл бұрын
@@smashyrashy according to all the testing i did as a child... yeah. cheers
@martincantwell25574 жыл бұрын
I use a rock and the side of the pedal😂..rough, yes..but it works.😁
@eichkay4 жыл бұрын
Defiantly .. i have the Wolf tooth master link pliers thin and super light for the trail pack. Also stores both my 12sp and 11sp spare chain links
@villimagg4 жыл бұрын
Working on your own bike saves you money while you're spending them on expensive parts. Which brings me to the conclusion that the biggest money saver is not doing mountain biking at all. 😅 It's not about the money, I guess. 😄
@DaveMustaine.4 жыл бұрын
What about an angle grinder? There is no tool as versatile as an angle grinder! 👌
@1brokenspoke1894 жыл бұрын
Keep your angle grinder a hammer and a axe are the best tools for working on a bike
@lihtan4 жыл бұрын
The angle grinder is also handy for deburring the cable housing after you cut it.
@islandaerial34144 жыл бұрын
C02 cartridges are another inflation option. Very compact
@richardhaselwood94784 жыл бұрын
These are good, but I'd say the floor pump should be the first thing to buy. Checking your tyres is something you check nearly every ride. Ones with a pressure gauge can be as little as $20 AUD, so bugger all really. Also I think I've had my Park Tool chain whip for 20 years
@colegermain28254 жыл бұрын
Also should note that you can use a bit of 10 speed chain as a valve core remover in a pinch
@dumbr20984 жыл бұрын
A friend of mine uses torque keys instead of allen keys, on allen key bolts.. he doesn't even have allen keys..
@tychoMX4 жыл бұрын
In general I also prefer hex and torx bits and a socket wrench, plus a torque wrench for home use.
@dumbr20984 жыл бұрын
@@tychoMX But you shouldn't use them for allen bolts though.
@Samsonmetaphysical4 жыл бұрын
If your going to buy tools I would recommend not buying anything made by Park Tools, that is not a bicycle specific tool. There's already tons of high quality tools out there that are inexpensive and manufactured by BIG TOOL COMPANIES . There are however some tools that are made by Park Tools that are bicycle specific that you will absolutely need to acquire. Your really going to need a quality set of metric hex t handles in size 2-10, buy the BONDHUS 13389 they are made in the USA and have a lifetime warranty.
@manueldeubler11274 жыл бұрын
These are the first steps towards @toolboxwars on instagram
@joshuameade24484 жыл бұрын
Oh yeah! Toolwars has some nice posts with some good ideas!
@donchristie4204 жыл бұрын
Does anyone make a little box/bag to fasten down where a water bottle mount is- I don’t use a water bottle!! Another simple reminder- Having tools with you and the knowledge to use them, can come in handy when someone ELSE has a problem on the trail to which you can be a DECENT person and help them out 😀
@karlkeates81404 жыл бұрын
don christie so muc off make a thing that goes in a bottle cage you will have to buy both a cage and a bottle thing its like a little barrel and they sell a insert so stuff doesn’t rattle around in there
@rupedog4 жыл бұрын
Fabric make a tool caddy. So do others. Or use any old water bottle with a big neck
@the_spanner_ch7mp4 жыл бұрын
Great tips video Doddy. Fortunately for me being a HGV Trailer fitter (mechanic) I have most of the required tools although I am going to get some specific dedicated bike tools. Cool stuff #GMBNTech 👊 🤘
@ArsenicEagle4 жыл бұрын
Doddy, you should throw together your own toolkit for a giveaway!
@jimmysmith854 жыл бұрын
how can u say a different shade of plastic dated lol
@rupedog4 жыл бұрын
U usually get a valve core remover of some sort with all tubeless valves, sometimes a little plastic one with a square hole (expect many chuck this away as not sure what its for)
@cliffsangelsphotography4 жыл бұрын
I hit Like for that Scout Trooper helmet sticker on that toolbox
@garrybunk4 жыл бұрын
#AskGMBNTech - I'd like to see a proper video on changing cassettes, using cassette shims (I never knew these even existed until I removed my cassette to replace it), and aligning the cassette & crank sprocket for proper chainline. My question for you: I've just removed a SRAM 11-speed cassette (11-42) to replace it with a Box Components Box 2 11-speed 11-46 cassette. With the new cassette mounted I can't get the rear derailleur over far enough to the largest cog. The limit screw is completely backed off but the derailleur has reached it's physical limit of movement. It appears to me that the cassette needs shimmed over closer to the chainstay (further away from the hub). I'm afraid by adding shims the cassette locking won't bite on enough threads. What is the proper way to handle this?
@tychoMX4 жыл бұрын
I've had that problem. In my case I was trying to match all my bikes and wheels spacing to be able to use them in the indoor trainer without adjusting the shifting. One needed about a 5 mm shim, another 1 full mm. But it's hard to coach you through a video because the issues will be specific to your setup. You have to try it, test it, and see if there is enough "bite" on the lockring after you've shimmed the cassette. There are even longer lockrings with more threads precisely for this issue. EDCO has them for their 11-to-10 cassettes that are meant to be used in older (or MTB sized) cassette bodies. The KCNC lockring I've got also seem longer than the standard Shimano/SRAM ones. Same issues with disc brake wheels, and trying to make all of them match for quick wheel changes!
@ln6634 жыл бұрын
I stay away from bike branded tools if possible. They cost more than getting an equivalent tool. I get bondhus hex/torx. For screwdrivers, pliers, etc these are common and need not be park.
@hedemalmcarl4 жыл бұрын
Im gonna use NP-6 Park tool needle nose pliers as cable cutters, ive seen it cut cables and is it good?
@TheMoodyedge4 жыл бұрын
Well It's groundhog day.......again.
@roilev4 жыл бұрын
Don't bother with the air booster, it works worse than a cheapo CO2 canister. You still need the good pumps though, the CO2 is for the races, out in the cold or when the stubborn tyre refuses to seat with a compressor
@mattgies4 жыл бұрын
I especially appreciated the cameo by the Knipex pliers-wrench.
@RyanWiggins1zoom4 жыл бұрын
Wow thanks for the tip but what about petal spinner
@nvkulk4 жыл бұрын
If those are Kniplex Pliers then they are more than all those tools combined!
@ronwhite85034 жыл бұрын
I prefer a car oil filter chain tool for removing cassettes; never slipped using one and they are cheaper and over engineered.
@alexdesjardinsmtb54094 жыл бұрын
is it necessary to have a torque wrench?
@jaygolden42184 жыл бұрын
What is the mini pump that youre showing in the video? Thanks
@paulsima42294 жыл бұрын
You should make a new series with how to use every tool
@siegeferrer19264 жыл бұрын
Would love to see it too.
@gonzaleznadia22 жыл бұрын
Does it come with the tools?
@juliangoulding4 жыл бұрын
Those Park Tool cable cutters are so so soooooo good! 🔥👌
@idamelin2 жыл бұрын
Excellent!
@musicste23454 жыл бұрын
Talking about trail tool.. I have one that has allenkeys from 1mm all the way to 8mm... Has chain breaker.. flat head... Torx T25.. screwdriver and spoke key.. cost me £5 and works amazing...
@davidking36994 жыл бұрын
Tools for home are sometimes different to what you want for MTB work... if you are working on your kid's bikes, you will have cones, schrader valves, and conventional bolts... so a socket set or ratcheting spanners are useful... same if your partner has a simple conventional bike... less high tech fasteners, and more old school nuts and bolts... I know that I have some tools that are need to keep 25 year old bikes running that I would not find a use for on a modern MTB... One thing that I think is important, because any other tool would be a disaster, is a spoke spanner...
@randomdudeontheinternet43894 жыл бұрын
Nice Scout Trooper sticker
@woozertoo4 жыл бұрын
RandomDude OnTheInternet getting ready for St. Paddy’s Day!
@rantingwrench4 жыл бұрын
For pumps, I would recommend one of the 'mini floor' pumps. Much smaller than a proper track pump, but they usually have a little fold-out foot and a better handle which makes it easier to get up to pressure, and they'll fit in a riding pack. Something like the Lezyne Micro Floor Drive.
@davesimmons86404 жыл бұрын
My wheel axles have cones?? And they can be adjusted??? Who knew? An old, dull screwdriver and a ball-peen hammer have been good enough so far!!
@rupedog4 жыл бұрын
Sram brakes need a T10 for bleed screws and pad retaining pin, so essential if have sram brakes....their torx key u held up has T10 and T25
@ddsgardening74374 жыл бұрын
Very enjoyable info👍
@landonashby20294 жыл бұрын
As one of my most used tools. I highly recommend as an upgrade a bike specific mini ratchet with bits. I find myself using this tool almost every single time I work on my bike whether it's at home or on the trail. It would be a very good upgrade from the basics. I like the Pro Bike Tool mini ratchet myself but the Topeak would be just as good.
@dancingduck33hi474 жыл бұрын
This is the best video on KZbin exactly what I was looking for
@ingopaul674 жыл бұрын
Roddy, you are such fountain of knowledge, luv your view.
@Mrich7754 жыл бұрын
Great video as always, especially now that spring is peaking behind the clouds, great vid for all the new riders!
@a1d8a2m4 жыл бұрын
I would add a bleeding kit as well, comes handy.
@donbenincasa74424 жыл бұрын
So gnar, will help me drop into some more sketchy and sick trails!
@markopolo95594 жыл бұрын
Very good idea putting this vlog together. I live in a flat and store my bike in the spare room and have a lack of space so good to know the minimum tools needed. I have tin snips for cutting thin sheets of metal, would that work ok on cable cutting?
@rockytrails80744 жыл бұрын
Probably not. Tried tin snips, tried fence cutters, tried bolt cutters. The bicycle cable cutters just work better.
@hopooba4 жыл бұрын
I just bought a pair of cable cutters last week.
@j_roache_doherty4 жыл бұрын
Hey guys here's a #askgmbntech for you. When I am pumping up my presta valve in the past I have been pumping and the head of the pump jerks around a bit causing the tip of the valve bending then breaking off leading to it leaking air. Any ideas how I can stop this from happening thanks doddy.
@dustinnoyfba72274 жыл бұрын
sorry im not doddy, but i have had this problem and the easiest and most effective solutions were to get a better pump for presta or get a presta to schrader valve adapter and use a standard pump. the adapter does a great job of protecting the valve pin. by the way you ARE using the pumps clamp to hold it to the valve right? not just pressing it on?
@krzysiu40034 жыл бұрын
26 x T25 bolts V 28 Allen bolts on my bike
@jesusenriqueriveratellez5314 жыл бұрын
Hi 👋 , it will be great if you could make a review of you new canyon Lux
@benasquith264 жыл бұрын
They don't do reviews
@badlarry1724 жыл бұрын
best advice don't buy cheap or even mid range cable cutters
@badlarry1724 жыл бұрын
@Trump TheTerrorist i'd be willing to bet they are good regular wire snippers
@badlarry1724 жыл бұрын
@Trump TheTerrorist yeh i had a bad experience with "Silverline" should have known better at my age
@kristen71924 жыл бұрын
lots of tools on this show :)
@richardjeffery5174 жыл бұрын
I want a tool kit that fits inside my raceface atlas crank hollow spindle
@tychoMX4 жыл бұрын
There are actually a few options. I remember the "All In Multitool" that used magnets to hold it to steel spindles. Not very cheap though. Also a couple that go inside the thru axles and inside the handlebars.
@NerfHerdsman4 жыл бұрын
What bottle cage is that? Looking for one that will hold a car key
@rupedog4 жыл бұрын
Topeak
@inspiredtotired83694 жыл бұрын
Starsky & Hutch bike :-)
@rupedog4 жыл бұрын
Yes! Cool (bar the tan walls imo)
@Tom-nn9ey4 жыл бұрын
Great video dod.👍🏻
@woduk4 жыл бұрын
Also torx t27 for shimano chainring bolts
@krzysiu40034 жыл бұрын
It's actually t30
@woduk4 жыл бұрын
Chris thanks I’ve just checked my bike and it is t30 I honestly thought it was torx 27.
@jurijrozanec4 жыл бұрын
Hey what is the most expencice bike specific tool?
@mattgies4 жыл бұрын
Depends on your definition. Could be an electric lift-assist work stand, in the thousands of dollars. Or could be a frame prep tool such as a headtube reamer and facer kit, around five hundred dollars.
@jurijrozanec4 жыл бұрын
@@mattgies what about everyday mainterance?
@mattgies4 жыл бұрын
@@jurijrozanec I do use a work stand for everyday maintenance (not a fancy electric one, however). But if you want to limit this to frequently used hand tools, then I would guess cable cutters might be the most expensive one.
@PissedOffCil4 жыл бұрын
Haha, I used my cable cutters to cut an electric wire one time... turns out it was still hot and 240V. Needless to say it was a massive spark that ended up melting the cutters...
@tychoMX4 жыл бұрын
heh. Done the same, but not with a bike-specific tool. Big round hole on the cutting edges of the tool.That's one of those things you never do again.
@mattgies4 жыл бұрын
You can cut a live wire, without incident, if you know what you're doing. The caveat is that you must isolate the wire and the tool you're using from any ground path (this includes your own body, or else you will be electrocuted). When you destroyed your cutters with that arc, the tool must have been touching something that was grounded, or you cut both a live wire and a ground wire at the same time.
@PissedOffCil4 жыл бұрын
Matthew Gies Yeah obviously I thought I had closed the breaker. Nobody wants to cut a hot 240V wire... And I got a hot wire detector soon after.