MoFang JiaoShi MF3RS3 M Review!

[@amarm.m.5968]

8:08 that's the smoothest and fastest thing I have ever seen

[@aegis5021]

beautiful....

[@calcomcolt6931]

*gets ad*

[@Mahfy3w]

@@calcomcolt6931 laughs in ad blocker

[@jawad9757]

That's what sh... No

[@Doom_Guy_Slayers]

Whos here after RS3M 2020 and u dissapointed u get the rs3m

[@bacon.cheesecake]

5:18 slow cubes: slow hmm, yes, the floor here is made out of floor.

[@hamadachetouane9297]

Lol

[@avyayanand7306]

A man of culture😂

[@HarshSharma-xu6oz]

"Even 60 seconds in Africa a minute passes!"

[@undersea]

Now I actually want to to get a custom license plate with MF3RS2

[@spygun2638]

Lol

[@Jeric_Bituin]

Me, I want the MF3RS3M license plate number better.

[@aleksanderbeliaev8099]

Do it

[@brandonlam9982]

Star CuberR cubicle did that already

[@zezima464]

MF3RS3M or regular Yuxin Little Magic?

[@neboysa6249]

The cube's name kinda sounds like a algorithm

[@schmack221]

M F3 R S3 M

[@thefirekonaai8919]

@Harith Shah What's wrong with R?

[@thefirekonaai8919]

@Harith Shah since when is R not a notation lol, ever heard of 'right'

[@thefirekonaai8919]

@Harith Shah hahahaha no worries

[@reyeschristinejessicat.9400]

@@schmack221 F3 just means F prime right? Correct me if I'm wrong

[@OvereatenPotato]

This cube has been my main for over 2 years now and I still like it. It’s super fast even with the tight tensions I have. Corner cutting is really good, but there are small lockups that happen occasionally.

[@twistiicuber1055]

0:17 hardest cube slip of all time lol

[@jakechu6204]

Twistii Cuber how about Jayden’s?

[@Ark-ju2gt]

What a nice analysis, so much better than videos like "Well, that feel crunchy I don't know"

[@kearomalley5895]

0:17 lol I do that all the time

[@shahirs.243]

8:07 Those Gc perm fingertricks tho....

[@clashingnoob1366]

Smooth as fuq

[@TimofeiKouranov]

5:55 could've inserted with sledgehammer and gotten two edges oriented.

[@JPerm]

yeah that one was hard to watch

[@fireburst1760]

I wouldn't have because I know all the dot cases but not all the 2edges cases.

[@amarm.m.5968]

I don't believe you were able to see what was he doing the only thing I can see in solves is the steps when f2l when oll when pll

[@HXZRDofficial]

@@JPerm same here m9l8

[@diamondcomplex2376]

0:18 I need that flying RS3!

[@charon116]

i have one and it flies a lot

[@skeletoneagle7886]

I got my 52nd monitor of this flyligitic cube

[@s2erp5ent]

M F3 R S3 M? More like... M F' R S' M.

[@allana2019]

S'?

[@s2erp5ent]

@@allana2019 it's a middle layer notation. It's explained in ruwix.com

[@Y_a_r_n]

Lol

[@joey_mccreight]

HA

[@yee6202]

Is this a z3cubing reference?

[@theo4283]

Dude, no joke literally purchased this cube like 2 hours before you uploaded this video Perfect timing!

[@sameer.k.s9929]

Cube goes flying towards the laptop. Lmao.

[@nnova5757]

Rip laptop

[@ausdemradioklingtesdann]

I have the same profile pic as you

[@felix_1886]

Man i love these kind of Speedcube Reviews

[@supernova8392]

Always look forward to your vids J-Perm!

[@TheOfficialMisterC]

I got a GAN356 XS and I have found a sweet spot for the tensions, and it's a great cube, it is my second speedcube and I love it, I 100% recommend it

[@b1ack_sh3ep47]

You may not be the fastest cuber but you are the coolest ;)

[@lumina_]

2:01 now there's the RS3M 2020 with a dual adjustment system

[@altafhossain7793]

Wait for it, the next is gonna be top on everyones tierlist.

[@bobcoco6047]

You have the J-Permission to be critic on anything, I'll always watch it!

[@lenamaslennikova224]

I have regular rs3. It has such strong springs as rs2 had. After magnetizing it with N52 4x1.5, my rs3 becomes very controllable. And no, it's not very strong magnets for this setup. Somehow they feels weaker than ones in gan356sm.

[@vikiettruong2260]

I ordered the cube and set it up just last week. After playing with it, I really liked the cube, due to me having a more relaxed turning style and the cube being amazing at corner cutting. This cube really hits me in the sweet spot, although I hoped that the magnets could be a bit stronger.

[@stockyschannel9484]

Vĩ Kiệt Trương I’m considering buying this cube but I’m not the best at setting up cubes, was the cube good out of the box?

[@azeemhassan7281]

Already liked before watching the video!! Keep up the good work Dylan!!

[@anandasubramanyanaravi9573]

4:08 swith to roux complete solve

[@witherfoot2634]

Your reviews are getting better and better 👍👍 super informative

[@benjaminjonassen]

I made a strong magnetic (medium strength) 4x2 n35, and it's my main (RS3M)

[@spifuntastic621]

This cube is very good after setup, I set it up and now I like it more than my gan 354m. Also if u remove the screws in the corner stocks, this cube will become a main killer. U have to definitely try that. Use Martian on the pieces and weight 6 under the screws(where plastic and screw meets)

[@MuhammadHaris-uv4nr]

Does the corner pop??

[@JPerm]

oh I definitely think it's better than the 354!

[@KrMAZ]

Did u tried that out to see results???

[@JPerm]

I just mean the rs3m in general

[@the1barbarian781]

L love the anyone else kinda prefer the 354 over the x? I get better times on the x, and I like the bigger size, but the fast, loose, buttery satisfying feeling on the 354 is lost for good stability on the x.

[@scottdylan1790]

I stretched the springs & added some nebula, Wahla🤗

[@jasnammansa8565]

you mean viola?

[@vibhanshupathak3622]

Yes thank u jperm I was looking for this review since a long time

[@aparuparana7852]

Congratulations for 300k

[@willgregor8043]

Another great vid as always, keep up the good reviews. Been looking forward to seeing this one. :)

[@christiankennedy9502]

Awesome video! I love how detailed your reviews are! 👍🏻

[@JPerm]

thanks!

[@kevingonci2807]

Wow! Perfect timing. I was just about to buy one of these!🖒🖒🖒

[@AyushDuhan00]

You should connect your stackmat with your cstimer, it will be better than typing times

[@ninjacuberdk1466]

VERY in-depth look. Thank you!

[@KrMAZ]

Thanx for rs3m review Really Appreciated!!! I always believe you and your videos.

[@myguy4w164]

Might get this cube

[@jpeg7082]

That’s my main right there :D My one problem is that when I speedcube, My finger gets stuck because it’s too loose

[@formerly_xeni]

JPEG yup same problem with my Warrior W

[@lean_zay3155]

J perm keep u good work u inspire me

[@4me2ndtwin]

Great video ! Very good critiques !

[@evander29]

This review made me wanna buy a mf3rs2

[@dnb9913]

I've heard that when you remove the screws and the "anti-pop piece" from the corner pieces, the cube become much better. Why don't you try it?

[@dpage446]

it pops way too much and becomes unstable

[@shuochen1689]

1 advice is that I think you can connect stackmat to cstimer so that way you won’t have to enter your times all the time.

[@JJDeafGeek]

He was using earbuds. Look at the left side of laptop for white wire.

[@benjaminlilleoen7934]

ayy back at it again with a good review

[@pragativarpe9521]

Guys, If you want an RS3m and already have an MF3RS2m then just swap out it's springs with weak ones. Voila! It behaves exactly like an RS3m. I personally experimented with the weak springs from my older MF3RS and every aspect of my MF3RS2m behaved just like the RS3m. It did get a lot faster though but the pieces jiggled around a lot more, weak magnets didn't help much and yes, just like J, my average was worse as well:) The MF3RS2m is definitely better than thr RS3m, hands down!

[@actioncameraspro]

I have MF3RS2 M!!

[@razumnik]

Živjo

[@actioncameraspro]

@@razumnik Si slovenec, ne.

[@razumnik]

@@actioncameraspro ja

[@actioncameraspro]

@@razumnik Carsko, se lahko narocis na moj kanal, plis.

[@razumnik]

@@actioncameraspro izboljšaj kvaliteto pa se mogoče naročim v prihodnosti

[@BiffHorrific]

If you want a rs2 faster put gts2 springs in it. I done this as I saw your video saying it improves the gts2 but the rs2 is the real winner for me 👍

[@cubewiki8371]

Hey dylan here's a triva Did you know that the mf3rs3 non magnetic has strong springs and I also think its very weird that the rs3m has factory compressed spring

[@cheesecakecuber6909]

Try spring compressing the RS3, I did it with mine and it worked out great.

[@JPerm]

but that makes the springs even weaker

[@cheesecakecuber6909]

@@JPerm true, but it worked for me in some way. The cube stopped having that slight uncontrollable feel that I got with the RS3.

[@durjagovekar363]

I just love your vids.

[@shadowcub7526]

THANK YOU

[@shuochen1689]

Best review video ever!

[@venkatabutchibabupalagara3148]

Your videos are so amazing

[@rohansawant4986]

I am just waiting for this

[@BenMc_1234]

I just realised this was uploaded on my 12th bday 😆

[@empputrubaduu4725]

So which one out of the cheap magnetic cubes you showed is the best?

[@razumnik]

Mf3 rs2 m

[@sajanvidhyesh2854]

No little magic

[@Probott-r1w]

Who is here after rs3m 2020 ¿

[@ericzhu6620]

me

[@jorian_meeuse]

Is it better than this one?

[@ericzhu6620]

@@jorian_meeuse yes

[@psyche16yt7]

MoYu RS3M 2020 came into the industry like *Sup*

[@anshumanagrawal346]

3:25 Name: Shorter Lol next time I'd make sure the name of the cube I'm buying is short enough

[@GuestBuilder]

I know this is an old video, and you wouldnt want to re-review it, but try using dignitas, gravitas, lubicle black, and dnm37 in the way angstrom cubes are setup, it really seems to have slowed it down enough for the magnets to better with the speed of the cube, but still have it be a fast cube

[@optimalsenpai9470]

ty for the review!

[@YashBudhiraja]

Weilong WRM review as soon as it comes in?

[@mkay2970]

It’s pretty much a gts crap I mean 3m without ridges

[@voidedifbroken3953]

@@mkay2970 Imagine thinking the gts3m is a bad cube

[@mkay2970]

Voided If Broken it is tho

[@emps2376]

basically every flagship is really good and up to personal preference. If you don't like a cube, don't be so much of a dick about it.

[@changes8498]

geekdemon I hated it out of the box, but after setup it’s my main now

[@-crazycat]

weird how he puts the valk 3 m as slow even though its fast as hell (fastest cube i have)

[@ryanliew7415]

Great video J-perm! I've been looking for a new 3x3 since I been using my valk3 for 2-3ish years , but I still can't decide if rs3m or tengyun m is better since my price range is budget to mid range. P.s my turning style is slightly harsh.

[@JPerm]

I think the tengyun favors relaxed turning more, so probably the rs3m in that case!

[@ryanliew7415]

@@JPerm Ok! My decision is final then , Thanks and it was worth the wait to watch this!

[@SelvaKumar-th1lh]

Gan air sm

[@lucesjoaquin]

why does the rs series sound like an alg? MF3RS2 M - M F3 R S2 M MF3RS3 M - M F3 R S3 M RS3 M - R S3 M RS4 M - R S4 M RS2 M - R S2 M

[@jaymhar.saldana]

J Perm Made me Buy This Cube!! My New Main

[@uCubeYT]

I definitely think that the mf3rs3m is a cube that is questionably better than the rs2m. Personally I see it as an upgrade and I love everything about it, including the weak magnets, and it gets me good times, however I definitely think some people won't see it in the same way. I personally like it better than the X though.

[@voidman6419]

Now my rs3m center logo sticker has started to come off

[@devinhoepner2107]

Love the videos I use this cube as my main but I used the mf3rs2 springs in it

[@stockyschannel9484]

Devin Hoepner is this cube good out of the box as I am not the best at setting up cubes

[@coffeetable8594]

So, is this your main now?

[@darth_samuraii]

Yeah

[@shreymittal2346]

Nice video iam waiting for it

[@x58so]

Hi J Perm! Is RS3M is you main?

[@HITMANFREEFIRE]

Thank you j perm , i am from india

[@lindenbaum9448]

Nice review! I agree that RS3 is more similar to GTS2 than RS2. Unlike RS3 and RS2, which use linear, relatively strong springs, RS3M uses non-linear springs which comprise a half weak part and a half strong. I understand that Moyu might think that magnets can share the burden of stability with springs, but those weak parts are way too weak like most Yuxin cubes. Moyu gts2 and mf3rs series generally have bad corner cutting, since the centre screw insert is too narrow and it hits a screw head before springs compress fully. Hmm, but I don’t understand why your RS3M has better corner cutting than GTS2M because both share the same springs and similar centre piece inner designs, so it should be similar with similar spring tensions. Anyway, I really like watching your insightful review and solving tutorial series. Thanks.

[@JPerm]

Thanks for sharing your insight as well! Ive never looked that far into cube design so this is all new to me, but I have had 2 gts2's in the past that both have worse corner cutting on varying screw settings, while the rs3m corner cuts this much on 2 different screw settings so I think it is just better at corner cutting somehow

[@lindenbaum9448]

J Perm Yeah, it can be. I also felt GTS2 has worse corner cutting than RS3, but I just thought, that’s because I strengthened RS3 magnets right away; hence weaker tension and better corner cutting. I will try the factory RS3M. (I guess, the magnet strength is almost the same as GTS2M, isn’t it?) Or the newly designed RS3’s centre piece might work to improve corner cutting as Moyu advertised. Anyway, thanks for the reply!

[@tlago1613]

when i see you solving i always wonder why you dont setup cstimer to stackmat instead of tipping?

[@adnanchowdhury8548]

Are you going to review the rs3m 2020 edition? If yes, when?

[@ErenMC_]

MFJRS is one of the best budget cubes at its price

[@krebualex3807]

I think your videos had a nice touch if you put a nice picture onto the lamp you can see through the screen of your laptop. But yes, great review, like always.

[@JPerm]

LOL I might!

[@johnstonliu8127]

Where does the gts2m and little magic m rank on your list?

[@JPerm]

little magic M is pretty much the same tier as the top cubes on my list, and gts2m is much lower

[@johnstonliu8127]

J Perm if the gts2m has magnets similar to the gts3 where would you place it

[@JPerm]

not sure, I've never tried that

[@johnstonliu8127]

@@JPerm what do you think about the valk in 2019?

[@JPerm]

best non magnetic cube, but for magnetic it's still above average, not the best though

[@kevinanhtran5907]

Hey JPerm! I would greatly appreciate a response to this whenever you get the chance. Are you saying that a RS3M with springs from a regular RS2 is essentially the same as a RS2M?

[@twistiicuber1055]

Kevin Anh Tran hello Vietnamese person

[@shouvikdey4366]

I've been using an ordinary cube for 2 years which sucks now.So i was looking for a new budget cube and i am stuck between rs2 m and rs3 m.Also this will be my first magnetic cube so i wanted to ask do we have to push hard because i prefer relaxed style so should i buy magnetic version.Please help me out j perm. Also i previously i asked you about oll algs and how to memorize it and i followed your tip and now i almost remember all of them so just wanted to say thanks.Really appreciate your effort and always looking forward to your videos. Edit:i don't wanna do any setup like lubing or magnetising so please recommend me the one which is good out of the box

[@fathimanajiya4825]

Will you make a review of the moyu WR ? my annual vacation is coming and I want to buy a new cube so I'm waiting for your review on the WR and the valk 3 elite please make a review !

[@cubingwithpramay600]

Can u do a budget 7x7 comparison vid? Please

[@SlightSmile]

i got the notif RIGHT when mykylin v2m camd

[@AsteroidDelta]

It’s sad that they don’t make the RS2 anymore. I want to try it out but I guess I’m not going to get that opportunity

[@JirachiFatestar]

Holy cow! How many solves are in that average?

[@slcuber8086]

Great cube

[@thecosmiccubing]

I got this cube and it is my new main

[@thefastcuber.3676]

The cubelelo elitem mf3rs3m is way better than what u recieved

[@gnoygnoy]

cube collection video plz

[@welsonliong8607]

Wow only four letters this time!😂😂 When there are cubes called dayan tengyun m amd yuxin kylin v2m😂

[@zaakirmiraj8876]

Guess need to wait for MF3RS4M THEN

[@eternalrewind2190]

I've had this since it came out.. didn't like it much... I put extra magnets with the existing ones in and it has even stronger magnets then gts3m... I changed the sticker shades too... Frickin awesome cube now.. stronger magnets make all the difference.

[@anishadixit6200]

1st to view but was a bit late btw which laptop do you use 😭😭

[@JPerm]

dell Inspiron 7000 series something

[@tryhardfighter1833]

I've had this cube for... eh. 4 or so years now. I currently main the ys3m, but i always had the feeling that with some decent magnetisation it would become good (as my country didnt have the service back then). I'm planning to get some 4x2s. I might decide to main this, as it is just so good even without magnetisation. While turning relaxedly, i would get sub average times. on a non magnetic cube too. Very odd. Also i kinda ruined the speed by running it dry for too long haha, so its controllable.

[@aitbelaidbadr8347]

This one or the valk3?

[@stavya2337]

Now what if u swapped springs of rs3 with rs2 i know its a little late but just asked

[@saiyadakhanam6546]

Dylan please review weilong wr

[@emps2376]

I just recently got the RS3M, and I don't really have the issue with the freedom for the pieces to jiggle around. Maybe it's because I have it set to tight tensions, or that I just kinda turn slower than you, but try tightening it.