UPGRADE YOUR RS3 M 2020 IN MINUTES!! + Assembly Tutorial

[@benedekvali1398]

Did the upgrade yesterday, and the cube feels great! However, some edge pieces were extremely hard to split, and I ended up breaking 2 pins (on different pieces). They were stuck in their place and could not do anything against it. If you are in the same situatuion, consider that it is not a biggie if one of the 4 pins breaks in an edge, but do consider taking more time trying to resolve the issue with light pulling. If 2 pins seem to be stucked, definitely try to get one of them going before applying brute force.

[@thephoenixsystem6765]

I'm sat here with mine thinking "pull them gently apart" is complete lies, video evidence here be damned. I've got one piece apart by pulling gently. Everything else is stubborn no matter how gently or hard I pull. ☺🔫

[@thedumone2300]

I DID IT ALL IT TOOK WAS A BADLY BLEEDING FINGER

[@Nammie_Nguyen]

I’m sorry when that happened. The same thing happened to me but only my jperm one and luckily I had a another Rs3m but not a jperm one and swapped the pieces if they got damaged

[@Daisakuueno]

Great video! I thought they were for the end of the Corner piece rods and thought oops i bought the wrong thing, but after finding this video I now understand it is for the edges and that you can open up the pieces!

[@ludakris112]

Have to give props to this video, it was my first time disassembling and reassembling a speed cube, and I had zero issues following the tutorial, once again, thank you SCS

[@JavaCuber]

I prefer light magnets, I guess that's just what I"m used to.

[@speedcubingaccount4121]

I do light mag cause i do OH

[@alejandro.p]

Hi Java😳

[@JavaCuber]

Alex Pi. hi

[@thespeedcubingstudio2537]

Even I

[@jeonjungkook6478]

I haven't gotten a magnetic cube, I'm getting my first RS3M in 4-5 days though!

[@marygrinter4878]

Thank you so much for taking the time to really show in great detail how to disassemble and reassemble the cube. All other videos, the person explaining already knows how it works so they tend to rush a lot of parts that aren't obvious the very first time you try it. I think they forget all these little details that you took the time and care to include. Thank you for this video ❤️

[@octogintillion]

*0:12** Liam Thompson intensifies*

[@thequietkid4135]

LMAO

[@rayyanferoz7746]

Qboid lol

[@ethanbruce7647]

Bruh I just commented this and found this

[@Tinoweiyideruiter]

@Qboid hahhaha Liam Thompson ''good boy'' or ''omg''

[@chargedcuber3567]

What the intro music name?? Does anyone know?

[@katelee3769]

What are the strength and size of the magnets?

[@WooHesii]

N50 4x2 mm

[@elaphantykid8016]

this is really helpful I didn't want to spend like 30 aud for some magnets including shipping

[@WooHesii]

@@elaphantykid8016 btw if you get the rs3m you can add these magnets extra for 2$aud i think

[@elaphantykid8016]

Im not planning on buy from SCS because of shipping time and cost I just want to get it asap

[@elaphantykid8016]

thanks anyway tho

[@gjp33]

*For anyone trying to decide if they want to buy this,* I'll let you know that the added magnets give the cube a pretty significant magnetic bump. If you want a slightly stronger magnetic feel, then this is not for you. I noticed that it also made the cube quite sluggish, even after adding Lunar.

[@tpc31415]

GP I think adding lunar will make it too fast. I used solar for the core and tracks and a bit of Martian on the pieces

[@gjp33]

I put lunar on the tracks and it was still sluggish. I didn't use Martian though so that might've helped...?

[@jeonjungkook6478]

@@gjp33 this is weird but my friends whenever his cube is kinda sluggish he takes whatever lube he had and mix it with water??? Idk how that's supposed to help, I tried it on my cube but I didn't notice that much of a difference? He swears by it tho lol

[@gjp33]

@@jeonjungkook6478 Lol, maybe it depends on the lube, but I'd expect the water to evaporate. Just don't use it on the core, or it will rust the screws!

[@jeonjungkook6478]

@@gjp33 yep! Just for the tracks eheh

[@karinegendron2695]

Hi! Thank you for this great tutorial video. I am a complete beginner and I am looking to buy the RS3 M 2020 as my first good cube (I only have an old rubiks brand cube, it's terrible!) I live in Canada so I would like to buy all I need in only one order to save money on shipping. I was wondering, do you think the magnets on this cube would be a good strength for a beginner? Or sould I immediately buy magnets for it to make them stronger? I am also looking at lube. I think the galaxy one would be good, but I'm really not sure! Can you help me? Haha thanks!

[@zoinks5717]

hello, i might not be the person youre expecting to reply but, yes you should get the extra magnets as it helps with stability and makes it easier to control. also for lubing, you should just get weight 5 silicone lube instead of the drop in lubes. silicone lube gets the job done better and it lasts longer, plus you dont have to put as much. you can watch jperms tutorial on how to lube if you dont know how to, and i think this is a great beginner cube! good luck

[@karinegendron2695]

@@zoinks5717 Thank you so much :D

[@infernoplayer3887]

How is the cube now

[@karinegendron2695]

@@infernoplayer3887 I didn't order yet 😅 Maybe in the next months as I will have more free time

[@judem_2176]

Mine comes in 2 days :0

[@P0z1tr0n]

I know I'm a bit late to the party but reading through the comments I noticed that a few people have broken their cubes using this method to disassemble. I would recommend using a screwdriver to remove one of the centre pieces. You can then just lift the top layer off and remove all the pieces without applying any force to the cube.

[@firy2725]

Bro how do I put the screw back in? The screw then the twirly thing then the blue thing then the ring?

[@thesaltyspitoon6342]

@@firy2725 You aren't supposed to take that out 💀

[@firy2725]

@@thesaltyspitoon6342 yeah i realized it days after xD .. turns out all I had to do was take it off after only loosening it .. oh well

[@GenericName_.]

Bro thats called spring, screws and dual adjusment​@@firy2725

[@arnelpijuan7618]

Just upgraded my MoYu 2020 RS3M with N45 magnets. Was able to do it bec of this video guide. One suggestion, if your center piece caps pops out while putting back the pieces, you can secure it with masking tape. Once done peel it off.

[@abdulbarshams9564]

What size and how is the cube now?

[@xFearGodx]

This should be top comment man, I was getting so frustraited. Thanks for the tip

[@YE.L.]

the best cube in my opinion in terms of quality price

[@somecat7272]

And still high up on the list of best cubes

[@aleandersanchez7795]

the magnets are like the infinity stones

[@JLCubing]

true dat

[@yensteel]

Brings a smile on *its faces

[@christeetitus3782]

Yes definitely in 1:50 sec😂

[@deniskilgour]

Done this today 👍 hardest part for me was reinstalling the white cross but the rest just seemed to go back together very easily. Thanks for the video

[@SpeedCubeShopOfficial]

Glad it helps! How do you like it? ~Noah

[@yourrocketsdealer6904]

alternative title: saying *gently* 1 000 000 times challenge

[@rusty2521]

You mean 'dropping it in'

[@Krisuls]

He said it 6 times

[@Krisuls]

@@SquaZieYT ik

[@xreamac1394]

Well you put that gently.

[@NotoriousNastyNas]

You mean “care”

[@CubeForSpeed]

I also added extra 24 magnets to the RS3M 2020 and set it up. Definitely main worthy.

[@friedice5916]

What strength and size?

[@Mmadness]

OOOOOOOOOOOOOOOOOOOOOOOOOOO CFS2 ALERT!🤩

[@FPVSkittles]

Is this added for the "supernova" level setup?

[@Josh-j6r]

What strength are the extra magnets

[@jonygodperson3752]

Smae

[@fishdishanimations2192]

n50 i think

[@Josh-j6r]

@@fishdishanimations2192 ty but a bit late now

[@blakethenoobie1433]

4x2mm

[@muhammadibrahimkhokhar655]

I actually love the magnet strength on the rs3m 2020

[@codo8584]

If you use Roux then medium strength magnets are actually way better, your ring finger gets really sore after doing a lot of M moves on a cube with strong magnets

[@abdulbarshams9564]

Did you lube it? If so what lube did you use?

[@cubing4life296]

Did The upgrade today and i just want to say Thank You It Was Sooooo helpful truly thnx

[@arifwazir3584]

i cant order from scs cos of shipping, the shop im ordering from has 4x2 n48 magnets, would that be ok?

[@joseflindbom7680]

Was it good?

[@johndarylcacho6811]

@@joseflindbom7680 4x1.5mm N40 magnets are the perfect magnets to add in the rs3m 2020 because the cube is very stable and you wouldn't feel the magnets while solving.

[@MorkulaMuussi]

Just ordered one from the best cube store out there Cubicle!! Jk sCs for life

[@tpc31415]

Just got the rs3m. It’s great 👍 and definitely my new main over the gts3m. But I also bought this cause I thought the magnets were a bit weak.

[@caioellery9117]

you have the exact answer to my question here. i have a gts3m, but it is pretty old and starting to feel kinda bad for some reason. is the rs3m better than the gts3m?

[@tpc31415]

@@caioellery9117 depends on the setup and your likes

[@microwave911]

If you buy it somewhere else , will it give you magnets ? Help me.

[@tpc31415]

@@microwave911 I think the cubicle also has an extra option with more magnets

[@microwave911]

@@tpc31415 Oh thanks ! But...., I live in a different country so...

[@Bruh.151]

I just bought your cosmic version and am very excited

[@ItzEmz26]

thx so much this helps me a lot i am ready to upgrade the magnets of my rs3m but im just waiting for my magnets to arrive😊😊

[@ItzEmz26]

is it ok if i add N35 magnets on my rs3m cube? is it strong thoe?

[@adudescorner3267]

What is your opinion on the cube with the magnets installed? Do you prefer with or without the extra magnets? I personally do prefer stronger magnets but I just want your opinion

[@beavaldez6468]

medium magnetd

[@aidenkim82]

@@beavaldez6468 same

[@thescaramuchiesandstuff1408]

Will the magnets fall out because they were not glued on???

[@rody3199]

If you violently slam the cube down on the floor, then maybe.

[@Hctrbl]

@@rody3199 probably not Those are N50 Which is Pretty strong

[@markjamesmorelos1291]

Uhmmm can I ask? What's kind of magnet is needed?

[@HardPasta]

My friend: What’s your main? Me: RS3MMMMMMM

[@Christ-Central_Lifestyle]

Brooooooooooooooo

[@BambooNtertainmentIsEpic]

Cubesolvehero will put a billion magnets in

[@Axzel_VII]

Are n35 magnets good as well?

[@nexus2223]

Yea

[@ItzEmz26]

@@nexus2223 are they strong too?

[@IshaanOP07]

SpeedCubeShop: Like the video or I will _______ your cube Me: Lube? Like the video or i will *lube* your cube 😎😎

[@lexanris]

Hi, can I just ask what’s the diameter and width of one magnet piece? Thanks.

[@TroyDynasty2007]

It is n50 4x2 mm magnets, and there are 24 total magnets in the kit

[@ItzEmz26]

@@TroyDynasty2007 ok whats N50?

[@TroyDynasty2007]

@@ItzEmz26 N50 is the strength of the magnets

[@ItzEmz26]

@@TroyDynasty2007 oh ok thx

[@ItzEmz26]

@@TroyDynasty2007 also is it ok if i use N35? is it strong tho?

[@realTPerm]

Wait so the cube comes with magnets or we have to buy the magnets

[@mayaagrawal2736]

The cube comes with magnets, if you feel that they are weak (which they obviously are) you can put in extra magnets.😊

[@karmatake]

@@mayaagrawal2736 Does your come with extra magnet? I don't find extra magnet in the box.

What your tipe magnet.. N42 or N50

[@luiss3426]

Friends, I'm from Venezuela and I don't speak much English and I love your videos. Could you put subtitles in Spanish?

[@waffles6895]

Ok

[@JoseMejia-xq5rf]

Isn't there built in captions on yt

[@Shamoun2]

I Seriously don’t get how the shipping is calculated. I live in Denmark and the shipping from SCS is 12$, but for these magnets it’s only 2.99$

[@Shamoun2]

@@SpeedCubeShopOfficial is Martian then a lot heavier than the magnets? Cause the the shipping for Martian is 12$ and they are to the same address

[@Shamoun2]

SpeedCubeShop oh okay, thanks for clearing up

[@Shader1S]

@@Shamoun2what they say

[@badalmachhi7952]

Which size of magnets are pre-installed in RS3M 2020 .....?

[@RajonAccount]

Does this include corner piece? I ordered 50 magnets so idk if corner pieces should be included in the setup.

[@Axpxlxwx]

Yes

[@kronowtf]

Hey SCS! I have a question. Does the RS3 M 2020 have the set of magnets like shown in the video? Please reply as i am getting one. Thanks

[@ingles_78956]

It has magnets but they are a little bit weak, if you want them to be stronger you need to buy the extra magnet set that is shown in the video. Personally I like how it is out of the box, they don't make middle layer turns hard and help a lot to make it stable.

[@kronowtf]

@@ingles_78956 ok thank you

[@kuldeepsinghsisodiya6011]

Thanks for video Love from India

[@inzaneuniverse]

can you just replace the magnets with stronger magnets?

[@toshio7195]

its easier to just add them

[@somerandomperson5314]

1:27 pretty easily me: aaaaaaaaaaaaAAAAAAAAAAAAAAAAAAA. WHY WONT THIS EDGE COME APART

[@PatJones82]

EXTREMELY helpful! Thank you!!

[@aryan78771]

i cant open an edge. pls help. only 1 is not opening. to be more specific, the white and red one.

[@aryan78771]

and the blue and yellow one. that makes two of them

[@faras1005]

same

[@MiauMichigan]

I followed the video out of curiosity and turns out I like the weaker magnets better 😅 Stronger magnets made my hands hurt because the cube felt too stiff. Anyways, thank you for the tutorial! Instructions were great 😊

[@austinxiao6452]

wait? are you supposed to magnetize the corner pieces?

[@hypotheticalcuber4051]

No

[@toshio7195]

no

[@ryaminty3520]

did that with my wrm 2020 cuz the magnet strength is too weak, and it worked great

[@9e_andimuhammadrafikhayri36]

Imo the magnet strength in the rs3m 2020 setup (the cube in this video) is weak for me so my rs3m is different from this one, mine has 2 n50 magnets and 1 factory magnet in each piece, so 3 magnets each piece. It now feels like a Gan 11 m but more heavy and smoother, i like it but i still main the 11 m, the cube is overall great but not on par as the gan 11. I would recommend this kind of setup, it's great for beginners to pro because of the price and the stableness of the cube, 10/10

[@sodiumzirconium6291]

how did you put the 2 n50 magnets in each piece bro? thanks in advance

[@toshio7195]

@@sodiumzirconium6291 just do the same thing that he did in this video

[@nzgaming34]

Is there a chance that the magnet will come off if the cube is dropped

[@Harrysun7]

How do you set up your Rs3m 2021 I've got a new one but it's uncontrollably fast. So i stopped using it. Can you tell me how to set it up Correctly ?

[@kawaisou167]

back here in 2022 wondering if the kit works on the 2021 maglev rs3m

[@clxalt3202]

I had all the magnets put in place but sometimes the magnets attract to the other side and so one side has 2 extra magnets while 1 has none. any way to fix this or just an issue that you have to ignore?

[@bibekanandasonowal7811]

What is best magnet strength for rs3m 2020

[@SerialGaming]

Stock mags oo

[@ItzEmz26]

N35 to N45 N50 is too strong it depends on you

[@isaaclo5092]

thank you so much man now i can place my cube colours back to place :D

[@mislavjelinic5442]

Do we need to glue them? Why?

[@cubingecopark3268]

no

[@mustseenow991]

Can I do this to my WRM 2021 Magkev? Because the magnests seem very weak in the wrm 2021 Maglev .

[@aaryangothwal4793]

When you come for a magnet kit announcement but get a professional 3x3 reassembly tutorial as well

[@BambooNtertainmentIsEpic]

Yeye

[@flairwolf2367]

I have a gan 11 m pro and I cant do the last step, I dont think I can fix it does any have any suggestions

[@iceboi8651]

Cameron I just ordered an rs3m from speed cube shop got it today and it’s making weird spring noises can you help?

[@Y00NEEK._01]

If we also add magnets to corners it it will be fine or not

[@hex0825]

isn't there a chance that if you drop the cube some of the added magnets will come loose and attach to the other side of the edge pieces? that would be a pain to have to open up the cube again just to put them back to their side

[@toshio7195]

use superglue on them if you're scared of that happening

[@kristinerobin25]

Won't the magnets fall off if you like slam the cube rlly hard?

[@ArtistWithASenseOfHumor]

this is a good rs3m thank you for makeing my cube stronger😁

[@friedice5916]

If ever i try adding extra magnets, can i still take the magnets out if i change my mind?

[@karlliive1384]

Yes

[@friedice5916]

@@karlliive1384 tnx for answering my question

[@toshio7195]

ofc, unless you put glue

[@ScottyD]

What are the size of the magnets? (IE: 1.5 x 3mm, etc...)

[@gatomeong]

4x2 n50

[@harshitagarwal7659]

When are the nova and cosmic version of the WR M 2020 coming out ??

[@evander29]

hopefully sune

[@gamingjedi52]

@@evander29 is that a pun?

[@harshitagarwal7659]

K. Thanks

[@Warun16]

The edges pieces are stuck. I can’t pull one of them apart.

[@aryan78771]

same here bro

[@Warun16]

@@aryan78771 I can pull all of them except one piece

[@konstantinospantoulas]

What size are the magnets?

[@ItzEmz26]

2x4mm

[@shrirajpatil3084]

will these magnets fit to gan 356 i carry are these magnets stronger than the default magnets installed in gan 356 i carry ?

[@shrirajpatil3084]

@RoCuber k thx

[@kwunholee1320]

I have bought all the cosmic lube tester set but, how do I make my own cosmic gan xs?

[@ruler6911]

Easiest thing ever: m.kzbin.info/www/bejne/g6TMYWaOn9qSfLc

[@saab9251]

Haven’t bought a speed cube in a few years but still get emails, when did magnets in cubes become a thing??

[@foofyboi9482]

A few years ago

[@Evotionn]

@@foofyboi9482 me using my GAN R S which i bought 2 months ago: interesting...

[@toshio7195]

like 3-4 years ago

[@griffith8858]

Can I add extra magnets to the corners aswell?

[@abhishekbelani9923]

Yeah you can add extra magnets If you want stronger magnetic feel

[@griffith8858]

@@abhishekbelani9923 hmm ok thanks dude for the reply

[@slymetube]

i tried too, but feel so heavy and too clicky. Adding each 1 magnet in 12 edges and 8 corners. (4x2mm n50)

[@kalaidk95]

What's the size of the magnets

[@TroyDynasty2007]

4x2 mm

[@juanpablolondonoborja5192]

What magnets did you use??

[@bin-yasheiralibasa967]

Yeah I wanna know either

[@midea.6490]

They have a specific product on their website that is called like, RS3M 2020 MAGNET UPGRADE KIT.

[@bin-yasheiralibasa967]

@@midea.6490 what we mean is what strength and thickness of the magnets he used

[@juanpablolondonoborja5192]

The Gaming Cuber thanks

[@afonsha]

Idk what to do,i can't buy more magnets and i just have 8,were do I put them?

[@ryanlo2923]

Well u cant really do anything. Unless u want your cube to have some sides stronger than others, then u shouldnt put anymore magnets

[@phee303]

could i potentially add two magnets to each side and make it even stronger?

[@toshio7195]

ye

[@JaxzDoesBundles]

You technically could but you'd run out of magnets before you are finished

[@hyperion4223]

Nice dude. Epidemic Sound? I noticed the song was Ooyy- Come 2gether

[@graperush]

Whats the best magnet strength to choose? I wanna start cubinf but idk what is the best one to pick

[@ItzEmz26]

i think N35 to N45 thats ok but if you want it really strong you can add N50

[@priyanshjoshi7]

I don't know why, but I already got strong magnets (felt enough for me) in my RS3M 2020 and need more guidance on the lubes (We don't get DNM/Martian or similar lubes here in India 😂 ) for improving RS3M performance. Btw I only have MARU right now....

[@CubeRiser]

You could buy qiyi m1 lube and weight 5. I've found that when you put weight 5 on the tracks and Qiyi m1 lube on the pieces, it works the best. Of you want a faster cube, put in more m1 than weight 5, if you want a slower cube, put in more weight 5 than m1.

[@priyanshjoshi7]

@@CubeRiser thank you so much buddy, good to get advice from experienced users!

[@syeduzaerali7998]

Ap bas Vaseline istemaal karo

[@priyanshjoshi7]

@@syeduzaerali7998 nahi chalega bro, vaseline noobs lagate hai & I am not one of them.

[@syeduzaerali7998]

@@priyanshjoshi7 😶 sorry hum tou yaha noob hn

[@shadedisvibing8237]

Can someone please help me? Are you supposed to insert the magnets into the other corner pieces and other middle pieces after you've made the cross?

[@toshio7195]

no

[@Daniel1Playz]

My rs3m when i pull out some of the pieces on the edges its kinda glued

[@jorisvermeulen1272]

Hey SpeedCubeShop, I have a question about the magnets. I want to buy it, but it's currently out of stock. When is it going to return?

[@TheHispanicUsername]

It's back

[@Sebastian-ne7xi]

It’s back

[@lyricslearner1420]

Whick magnet you used and how many of them are needed?

[@Pranawayyy]

24 magents ??

[@Ayan-wt5mu]

How many magnets is required to add on rs3m 2020 And which magnet is best for rs3m 2020

[@CatsNCuteness]

24 n52 magnets

[@alwynfranzrapisora7990]

Do those extra magnets come with the cube?

[@shrekerking6400]

No it’s separate

[@thaiisfood]

I personally enjoy weaker magnets, but nice video anyways!

[@SerialGaming]

light mags best

[@realnub235]

Can you take the extra magnets out once you put them in or is it permanent?

[@sandeepjhunjhunwala8519]

You can easily take the magnets out

[@jettnerona]

Are they not gonna fall out while solving?

[@ItzEmz26]

no..

[@EL9Z3]

why not adding other magnets in the corner

[@fionnjohnson5161]

Would a 6mm magnet work or does it have to be 4mm?

[@alampaycecelia8002]

4

[@Efaz5]

Today I ordered this magnet and my worry is can I perfectly install all magnetic?

[@hassanarmy1384]

bro which magnets are these?? plz tell me

[@lewisgarthwaite7517]

cubicle: releases weighted live system scs: our weighted lube system cubicle: releases lubicle black scs: releases vortex cubicle: makes magnet kit for rs3m scs: our magnet system copy much? so original scs great job

[@charizardfouzi8804]

@@SpeedCubeShopOfficial well said bro All the cubing stores are great it just comes down to which one you prefer

[@Charlosb24]

@LewCrewCubing Sit down son, I am glad to see SCS standing up to such claims and letting misinformed people paint SCS in certain types of ways. The slogan doesn't lie "the original puzzle retailer" pre-dates all the large scale cubing stores if not all of them.

[@purpletomato5149]

You want good service with your cube or just curse them with silly things

[@bugzbdgr6018]

Already bought them🥳

[@midea.6490]

Me too

[@ruler6911]

Easiest thing ever: m.kzbin.info/www/bejne/g6TMYWaOn9qSfLc

[@NavyAng]

What if i add extra magnets to all the pieces instead of just the edges?

[@toshio7195]

it just makes the magnets stronger

[@Gilbertnuggyadventures]

Do the magnets come with the cube ?