Monday Mod Tips - Hammershot - Reassembly Guide

[@ThunderKnightZ92]

Fantastic, video. Straight to the point; no fluff, pure information.

[@miseryengine]

Geeze Cap, i feel like such a dolt, after struggling for 1/2 an hour trying to re-assemble in the wrong order. 3 min into your video, and all is right with the world!

[@ZakLeek]

Sproing is such a magnificent word. Thanks for the video Captain!

[@zaka0781]

Thanks for saving me again! If wasn't your guide, my Hammershot would have less springs now... lol

[@JohnJames.]

That same trigger spring trick ,is what I do for those pesky dart "tooth" spring things. Bangarang

[@sarganis2576]

What a great series! As a newcomer to the hobby, this is exactly what I needed to service my (used) blasters. And Hammershot is just nice. All screws are the same, nothing flies when you open the shell, can be tested before putting back into the shell... So convenient and nice to work with!

[@RaNd0Mk1D8o3I]

Just recently acquired one and wow, it's much bigger than I thought. The previous owner failed to mention it didn't rotate. And after seeing your video, I realized a spring was missing! Thank goodness for me saving almost all the bits and pieces of other blasters and I luckily found another extension one! Thanks much so for your most valuable of wisdoms!

[@1m_Luc1f3r]

This really helped thank you. Im trying to mod my hammershot (this is my first mod) and it took me for ever to figure put what pieces go where this was a great tutorial

[@LazerRay1]

I had to completely dismantle a Hammershot I ordered on eBay, since it had below stock FPS and the rotation mech kept jamming. Seems like the previous owner dropped the Hammershot in the sand quite a bit, causing everything to jam up, including the plunger tube, making it either have a bad seal or not disengaging while priming. After cleaning all the parts up and re-seating them, my Hammershot is fully functional and with stock Nerf FPS ratings, now I'm saving up to order the mod kits for it.

[@Videos4uByme]

Sweet nice job cleaning out the sand!

[@WilhelmScreamer]

this was a real lifesaver for me today when upgrading the cylinders, big thanks

[@jamesbaker1985]

Awesome video. i got this gun second hand for my little brother and after i was done taking it apart and cleaning it up i had no idea how to put it back together. This vid was perfect and a massive help.

[@firefreak122]

Thank you for this (these) videos. they are amazing and in-depth. they make everything easier to visualize and complete.

[@lukebell4738]

The Hammershot was the first blaster I ever modded! I still feel nostalgic for it today.

[@theaussinerfcowboy]

The most important video you have ever made :)

[@Jay_M_See]

Thanks so much for this captain. I'm new to your channel and nerf modding. I just ordered a hammershot from Amazon and the upgrade kit from Orange works. This video will be very helpful to me on my 1st mod. Gonna add a barrel and a hand guard later. Thanks again! Keep up the great work!

[@MrKeyz-yy6vd]

Thanks for this. I’m trying to modify my nerf 6-sh and the inner workings is basically a nerf hammer shot. I 3-d printed an extended hammer for HIP firing so that’s what I’m using this video for.

[@thecheddaravenger4084]

Thank you, I needed something to quell the malicious static in my head.

[@Zilla5454]

THANKYOU SO MUCH YOU SAVED MY GUN THANKS YESSSSSSSS!!!!!!!!!!!!!!!!

[@kendramason8789]

Thanks a ton for this video I took apart my hammershot and had no idea how to put it back together

[@WhateverNick]

Very helpful. I was stuck putting in my OMW kit. Thank you!

[@H3zzard]

The Hammershot has such a robust design! Thanks for the guide, Captain.

[@darrenjacobson7456]

This reminds me of the time Cap said that the Reflex 6 cylinder was the same size as the Hammershot and I thought, you beauty! I have both those blasters! Turns out he was right, buuut, the Reflex 6 rotates in the opposite direction! So the Hammershot's rotation arm couldn't rotate it. In my attempts to modify the system to work I basically destroyed my Hammershot. Fun times! I mean, it's really on me for destroying it but still, great advice Cap.

[@l0rd0f5k33p]

I never modded mine, but I meant to paint it. Never got around to it, but I’ve been missing my hammer shot lately. Thank you

[@Patty-Q]

This is quite timely, as I got my hands on one of these and was thinking of tinkering with it

[@therealscorpion95]

Same here

[@thatguybob1986]

Thanks again Captain 🙏

[@lordofpossums5750]

Thank you so much for this tutorial. I had no clue where the return spring was supposed to go before. 😃

[@kevinlucas2604]

I was having a problem in the only part you've not disassembled but I could manage to remove the broken pressure regulator, that was stopping my blaster to shoot properly, anyway helped me a lot to reassemble the blaster, thanks

[@-e6212]

Thanks for the tips capt

[@rhinojazzmaster]

Thinking about painting my hammershot so this will definitely be useful, this should be the same for the grey trigger version too right?

[@CaptainXavier]

Yes

[@jolemaire6629]

This is a great video series for beginning modders, thanks!

[@larsonwhoreton9826]

I wish they sold separate parts I lost this one after painting it for 5 days 8:57

[@coltstelting6969]

Background car go *VROOOOM*

[@Videos4uByme]

Nice mod and now that is one bad arse HammerShot!

[@classics967]

Tx for the Vid. Do you have any tips for the blach seal at the chamber end? mine is damanged and I doubt there are direct replacments. Maybe single sided foam 2mm?

[@stevenlapierre1742]

Best nerf channel on KZbin.....by far

[@thejourneyproduction2753]

I have been messing around with the spring for the trigger and I just can’t get it back into place, and I have tried to do exactly what this video says and I just can’t make it fit the trigger. What do I do? Like is the new Hammershot different from the older one? I have ordered the reskinned “Splatter” and I cannot tell if it is different from this one

[@terir8497]

This saved my hammer shot.I thought I broke it!thank you sir!!!🎉🎉🎉

[@toasterstroodle3527]

When i put it all back together my smart ar wasn’t working and the hammer wasn’t catching. Im gonna see if i can fix it

[@RubbedTheWrongWay]

Thank you, Captain I fixed my Fortnite 6-sh with this because they have the same internals

[@ojl11bub5]

I submitted to see a takedown of the "takedown".

[@StayLazzy_bbbbooiiiiiiii]

So i took my hammershot apart and i did not know which way the rotation mech top part goes so that i wont move other then the rotation thx

[@Planes9905]

Hey Cap, I recently just got my first hammer shot. I actually had the orange fortnite one first and thought that it was the shit. Well you always talk about your arsenal of HS so I finally got one for myself and boy what beautiful blaster. I orded 3 more off Marcari 4hours after getting my first one in my hands. It was a little quirky so I had to take it apart to fix and got it but what I nice set up. All the giblets just come out in one piece. What more could you ask for. Anywho. I'm writing because you have a ton of content on HS and with all your experiance I was thinking you probably ought to put out "The Ultimate Hammer Shot Build" i.e. springs/spacers, cylinders, and other hardware's. Maybe not so much on the cosmetics because of how drastic they change them. Any how. Just a thought I had after watching a bunch of the HS vids. Keep up the great work! PS I forgot I wanted to ask. I know sometimes you dont like taking the AR out of certain blasters. Is this one of such blaster models?

[@CaptainXavier]

Yes, do NOT take the AR out of a Hammershot. It does not help and can, in fact, ruin it.

[@bz4701]

Time to pick up one of the repainted ones and make it better!

[@audiebavington8789]

Capt X, do you have a tutorial on pulling apart the separate shell parts?

[@CaptainXavier]

I do not, no. Most of the older ones are solvent welded together.

[@audiebavington8789]

@@CaptainXavier Dang. And just bought pricey paint for it. Thanks Capt. Peace from Perth Western.

[@CaptainXavier]

Yeah, gonna have to tape it off.

[@StephenBuschemey]

Does anyone know where I could get a cylinder rotation spring?

[@Applejaxman]

my hammershot's foam ring at the front of the plunger tube fell off and now it doesnt work as good

[@CaptainXavier]

That will happen. Replace it. Either with a slice of Mega dart foam, a ring of craft foam, or a rubber gasket

[@Kidaneh]

Can you do one on the alpha/accutrooper?

[@CaptainXavier]

It is on the list, it will either be next of the one after that.

[@Kidaneh]

@@CaptainXavier Awesome! Im planning to do a paint job and my first real one!

[@isaiahha1927]

The rotation piece isn't functioning as it should, and I can't figure out why. Any advice?

[@vaquero2322]

Hey, Cap. Do you know how to put a Zuru X-shot 6 round cylinder in a hammer shot and still have it rotate properly?

[@CaptainXavier]

The key part is replacing the rotation mech with one that rotates 1/6th instead of 1/5th.

[@Memelord18]

Hi captain, I recently got a fresh hammershot off of amazon (my first hammershot as well) and for some reason everything works fine but when i load darts into the cylinder and fire, the gun makes a loud sound and the dart stays in the cylinder and when it does fire, it only travels a few feet. Any suggestions?

[@Mr-Ocelot5893]

Well I know how to re assemble it but I have problems with the air System

[@aydentran2384]

Can someone tell me a video to assemble the rival sideswipe rifle

[@Leeuw96]

Awesome guide, Captain! Thanks for all the quality content you make! Question: is there much (if any) difference between the Hammershot and Sweet Revenge internals? I've seen you mention some differences in other videos, like the front bit of the rotation axle, and the hammer and trigger assembly. But how much of a difference is between those? And are other parts different?

[@CaptainXavier]

They are 95% the same. The cylinders are even interchangeable.

[@epicchillman]

are the internals within the hammershot the same as the 6-sh?

[@CaptainXavier]

Mostly but not identical.

[@aerial9569]

Do you know where to purchase the return spring i lost mine a few years back when i tried to modify my blaster

[@CaptainXavier]

I do not. Best option would be to pull one from another blaster. I keep a bin of springs I pull from dead blasters for things like this.

[@aerial9569]

@@CaptainXavier oh alright thanks

[@johntowel8103]

Captian you should do a modular doomanator

[@BBQ55]

Ty brother

[@Akiliano405]

thanks bro the cylinder wouldnt rotate and now it rotates now so thanks

[@Akiliano405]

it was that weird spring that came off at the right side of the blaster

[@Newbluejay]

Thanks man

[@stevecrafter518]

A problem I keep having with my hammer shot is that when I prime it it doesn’t catch it . Is there any way I can fix this? Also thanks for the modding info!

[@CaptainXavier]

Sounds like your trigger spring is misaligned.

[@dailydose4919]

My hammer shot can not hold a prime do you have any idea why????

[@CaptainXavier]

"Hold a prime"? As in when you pull back the hammer it does not catch? If so my guess would be there is an issue with the catch. Open the blaster and try priming it and see what is not catching.

[@hweenor]

do any of you have problems with the hammershot squeaking? mine squeaks whenever i manually turn the cylinder, and occasionaly when i use the hammer to turn it. please help

[@CaptainXavier]

I have never had that issue. At least not enough to notice. I would try some lubrication.

[@hweenor]

@@CaptainXavier I reckon it had something to do with the cylinder rubbing against the rubber O-ring, I will try it

[@bluebear121]

do you have to drill out the ar from the front or back

[@CaptainXavier]

Neither. I don't recommend removing the AR from a Hammershot. But if you do you don't have to drill it at all.

[@bluebear121]

@@CaptainXavier I need to remove the ar for cylinder upgrade I have a dead space remover but couldn’t figure out how to get the end cap of the plunger tube

[@gonnabe765]

After finding out my hammer shot had its foam seal removed, I’ve been trying to find some place to get a replacement foam seal, thought this might be the best place to comment this so, any help?

[@CaptainXavier]

You can either make a seal using thin craft foam or cut a slice off the end of a Mega Dart.

[@gonnabe765]

@@CaptainXavier Thank you, also love your videos!

[@eggsbread984]

hm.. do you think the orange mod work kit is worth it?

[@CaptainXavier]

Yes

[@Cilantard]

You should edit the title because this guide is also compatible for the new NERF X Fortnite 6-SH!

[@asmith1074]

Hello Captain!

[@maskthelegend317]

Watching this made me discover my hammershot is just broker

[@oileaderboss]

Please do an ultra 4 reassembly please please please please please it's such a pain

[@blobfishiant8487]

Ironic, I just modded my first hammershot today

[@hystericallover5989]

irony =/= coincidence

[@alexandermacphearson4379]

I really love this series. I’ve never had a NIB Hammershot, they have all been thrift finds. Now as none of them have a smooth hammer return. Guess I need to open them up and improve the air seals. Any suggestions on what o-ring to use for replacement?

[@CaptainXavier]

It is probably not the o-ring. 8mIt is more likely that the foam gasket between the cylinder and the plunger tube is wearing out. It can be replaced with craft foam...which I happen to know you have access to. ;)

[@alexandermacphearson4379]

@@CaptainXavier, oh No Sir, that is Melissa’s craft foam. One would not dare use that with out express written permission. Least they loose a digit or whole limb. But yes I can acquire some, and thank you for the heads up

[@irctcjhabua6398]

thk

[@speakermasterdestroy3801]

My nerf gun i will load it back and it doesn't say

[@CaptainXavier]

...what?

[@hystericallover5989]

???

[@kerry848]

Hi!

[@CaptainXavier]

hi

[@kerry848]

@@CaptainXavier when will you do a video on the pigeon mk 8? And will you review 3D printed magazines?

[@CaptainXavier]

No idea, and probably not.

[@Dilly958]

Nice (;

[@barrageballoon4845]

Hi

[@CaptainXavier]

hi

[@moonchildhobi5552]

Hi cap

[@CaptainXavier]

Hi

[@moonchildhobi5552]

@@CaptainXavier ravine?

[@CaptainXavier]

@@moonchildhobi5552 ra·vine /rəˈvēn/ noun a deep, narrow gorge with steep sides.

[@CaptainXavier]

@@moonchildhobi5552 did you mean Rayven?

[@moonchildhobi5552]

@@CaptainXavier yep you know sometimes when you type fast and use the assistance you end up with the wrong word that what happened

[@larsonwhoreton9826]

nevermind I found it lol

[@titoteddy2111]

I'm the fifth person here

[@titoteddy2111]

I'm early again

[@evanwang7933]

"tuseday mod tips"