Monitor bracket assembly for non vesa compliant monitor

[@colinfernandes740]

After a very long time .. 🎉

[@8bitGoan]

Yes my friend. Nature is finally healing :D

[@procrastinator..]

is it possible to use the monitor vertically with this adapter?

[@8bitGoan]

Hello, you can try this. Although I feel it might be a little risky since the contraption is not screwing it place, rather is using the clips to hold the monitor by the edges.

[@Tdotttttt]

did the vesa plate come with it?

[@8bitGoan]

Hello, there is no vesa plate provided. You would need to use the vesa plate which is present on your monitor stand/arm.

[@sairajmayane]

Will it work for 24inch curved monitor

[@8bitGoan]

Hi Sairaj, it might not fit a curved monitor because the contraption is designed to work on flat monitors. With that said, it also depends on the curvature of the monitor. If I was you, I would see if there is any returnable variant for it on amazon and see if it works for me. If it holds on as intended, else would return. There are adhesive vesa adapters as well, but the idea of sticking something to the back of the monitor which can loosen its stickiness with heat and then using that to mount the monitor, doesn't sit right with me.

[@onknight]

If you don't have a flat back on the back of your monitor this won't work I found that out the hard way also you may have trouble with your connections they could be blocked by the mount I personally didn't like this type of amount and went with another one

[@8bitGoan]

Mine actually is bulky.. So had to adjust a little bit. But you are right about the ports being blocked. I had to move the contraption around to ensure none of the required ports are blocked.

[@paaaguel]

@onknight Which other model did you use?

[@fane6087]

Hi, so you can't use it vertically?

[@8bitGoan]

I would not try. There are chances it will slip

[@I-am-just-here-to-have-fun]

does it work with thin 27 inch moniter

[@8bitGoan]

Hello, I used this on my 27 inch monitor which had a slight bulky base, but overall it was thin. It should work without a problem.