Monoprice 602650 Sound Isolation Shield Test and How To Set Up with light stands

Testing the recording quality with and without Sound Isolation Shield with a Neumann TLM 103 hooked up to a Focusrite 2i2 Interface in a Bedroom. Also how to set up the shield with light stands incase you don't have a microphone stand.
Buy this using my affiliate link! amzn.to/45glYE4

[@t.s.9996]

You do not have to use two-mic stands with this isolation shield. Amazon sells it with a mic stand attachment bracket that allows use with a single mic stand. Actually, at 4:38 you can see the bracket for the single mic stand sitting in the box.

[@primaldivinity]

This was dope bro. People can be harsh with words but your talent to me sounds like a billion dollars

[@AnkurWow]

This was very helpful, thank you, especially with the installation process.

[@enmedallo]

Without Shield: 1:02 ::: With Shield: 12:30

[@matthooper5059]

He also changed keys.

[@yadipriyono]

Thank you

[@acvieluf]

Thanks. VERY little difference. Likely due to it being a cheap monoprice version.

[@pixxilutia6108]

@@acvieluf no it's because his room already isolates sound quite well

[@laurabrown1474]

One of the Best Ideas of SoundProofing is "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/

[@pipperoooo]

Thanks for the video! I couldn't figure out how to hook it up to my mic stand. No instructions. I have a pro line mic stand from guitar center that it fits quite nicely on just as an FYI in case you are looking for a new mic stand but thank you for the vid. :) Oh and I left my boom on there. The thread on the boom fit the center part of the shield perfectly. :)

[@deanbohana1269]

15 minutes of my life I'll never get back.

[@alex_jermaine]

no one held a gun to your head! haha

[@deanbohana1269]

@@alex_jermaine true and I apologize, stay healthy!

[@alex_jermaine]

@@deanbohana1269 You just inspired me bro! Keep up the humble positivity! Peace.

[@frankrichzambia1]

Wooowww I'm amazed with this review ❤😊

[@quanm3772]

your can to use the clamp with the 2 knobs for the stand its has to go on the back it should work for all stands skinny pole to so you could use a round base Stand

[@itsdanradin]

Hey man- take the little star-shaped washer off the tiny baton shaped thing and screw it on the mic stand before the flat black mic holder. It’ll hold it up- then put the shied third in the order on top

[@SameerSherwinKhan]

If you're trying to put this together - there's a clamp that you attach with the 2 hex screws on the back. It'll clamp on to any heavy-duty mic stand.

[@123446809]

switch over to the rockshield 4. and you can just use one stand... fun video. its always frustrating setting up new equip.

[@florencioalmirol]

Thanks for this helpful video!! The shield sounds like it works. You also showed how to assemble it. Now I'm really thinking of getting it. Problem is the camera can't see me in a video

[@down4mine]

So judging by the time lapse and the 2 separate stands that you used to assemble it the wrong way, you did a tutorial where you do not actually know how to assemble it to begin with.

[@RicoLamar987]

At least yours came with instructions, mine came with NOTHING

[@Mike87eX]

It took you 14mins just to explain something that could of been explained in 2mins So much un necessary content with stupid music....so did you waist you time putting this thing together? No you waisted our time watching you put it together, Thanks man

[@6kpivoe606]

He was trying to give good quality and a good explanation of everything be more thankful🤦🏿‍♂️

[@tr3ynag4ta]

So it cuts out the background computer noise and everything?

[@estherlopezgonzalez3507]

Which light stands are you using? So I can buy them too and don't get the wrong ones. 😊

[@DumbWithDom]

Cool video and test. I could honestly hear the difference between without and with. Though when you started testing out your mic after the Isolation Shield was set up, it sounded like it was peaking for some odd reason, but near the end it sounded perfect. Oh also, the music was very loud compared to your voice for me. Cheers, thanks for the video!

[@slumdogjay]

Been trying to figure how to set this up for ages. No instructions came with mine. Does not fit on my mic stands.

[@shawtybee7031]

What is it call to sit it up with I got my shield

[@gpayne9448]

I bought another stand but I can’t attach either of them as they don’t fit into the side holes. If I only use one stand it can’t support the isolation booth. Now I have to mic stands and still can’t support it

[@noekromar6847]

I got the same problem bro... and its fucked cuss I already bought a reflection filter do you found a solution?

[@gpayne9448]

@@noekromar6847 yh mate I was being a melon. The stand extends further and then it supports it fine. I still use two stands but you can probably use one

[@ramspencer5492]

It does sound drier. Would have been good to edit and cut and do an AB with and without it.

[@Dayaniherrera]

Hey, good channel keep it up

[@tykokidda4747]

This guy can sing bro 🎶

[@holymxnd1638]

Thanks bro!

[@giancarlo9189]

thx for watching. You can also buy a thicker single stand for this shield which has a thicker thread which will fit it.

[@ryanreedtv3242]

Wait, a $1200 mic going into a $130 interface? No Neumann shock mount?

[@Cyfix15]

thanks for the tutorial

[@mg.pro.record-music]

Hi can you tell me the name of the 2 stand please

[@d-rockanomaly9243]

didn't need the big detour about your backward mic.. And an A/B comparison at the end would have been nice.

[@yik6337]

Tiwastage F5 sound isolation shield

[@Oddlife777]

The thing I found with this isolation shield is its to freakin heavy to put on one stand. SO you gotta use 2 so it doesn't fall over. Kinda annoying but whatever. Please tell me if anyone found a solution for this

[@giancarlo9189]

I did eventually get a stand that will hold it sufficiently

[@Oddlife777]

yea. I just got a 3 leg tripod stand with a really wide range

[@itsource7533]

@@giancarlo9189 what stand did you use?

[@UnitedSoundVideo]

EverythingNerdy Gaming Channel I gave you a thumbs up - are you bumping your feet into light stand? Just received one of these thinking a mic stand with round heavy base. Main use will be tabletop and it’s perfect for that application.

[@ArusheelOFFICIAL]

That mic is like 1.1k That’s not a broke setup

[@izeanelson5153]

Wait so I have to buy a whole nother stand

[@giancarlo9189]

Not if you have the right stand which is stronger and has the correct larger thread on top

[@PolymerJones]

do you still use this? it looks like it could be a lot more simple?

[@giancarlo9189]

I actually sold it. I built a booth. I did eventually buy stronger stand to hold it by itself

[@rokituno]

Looks like mine came without that bracket . Does anyone know where I can find it?

[@6kpivoe606]

Does the mic come with it or no? Of not what mic do you have

[@PeterBilberg]

The mic is neumann tlm 103 goes for around 1100$, so it doesnt Come with it☺️

[@randalledwards2998]

Why not clamp it to one of those stands

[@giancarlo9189]

I am going to try that, I just moved and these stands do not hold and it looks funny lol

[@briller3879]

Can you explain the size of that isolation shield ?

[@kaseytay1810]

Your focusrite is your preamp...

[@standoutmusic001]

Hey my man.. Cool Video.. Was looking for Video's on isolation shield.. but what caught me was the song in the middle of the track.. Nice!! Is that you and how did you get the effect on your vocals!?

[@giancarlo9189]

The "Coming Back to You" part is using Cubase tuner and dragging the melody an octave up on my vocals :) Thx!

[@mattstpierre14]

“How to set up” dude, you didn’t show us shit you showed us the product doesn’t work with a mic stand? Wtf

[@LadyBug-sd9sk]

I said the same damn thing about the instructions! Good grief 🤦🏽‍♀️🤣🤣🤣

[@nickthechick5586]

What stands did you use for this?

[@GameThruz]

Sort your audio levels out. Talking quietly then blaring music is really annoying.

[@doofy140]

Attention everyone he made this very more complicated then it had to be he is very wrong

[@driftgodly3499]

What level of being dumb is he on 🤣

[@justinpianigiani3172]

Hello, what is the reference of your two microphone stands?

[@andewegproductions6481]

I'm laughing so hard when he came out like that and used 2 lighting stands.

[@laurabrown1474]

One of the Best Ideas of SoundProofing is "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/

[@joshx413]

You had no back to back, direct comparison. And you also sung each in a different tune..good voice, kind of good review, but bad comparison

[@laurabrown1474]

One of the Best Ideas of SoundProofing is "SoundProof Curtains" That Stops Outside Noise by 80% (25 Db) Tested. Check Here: livesoundproof.com/best-soundproof-curtains/

5:28 😂

[@giancarlo9189]

Epic fail lol. Whoo this was a while ago

[@nikstbo]

🙈

[@boatshoe2636]

cant edit

[@Glurgg]

did i ask

[@joebloggs8636]

Too bad its such little girl music

[@connaway]

i have an isolation shield but i lost the thing that lets it stand up with a mic attached so its sitting on my desk anyone know what those parts are called

[@lissylouxo2965]

hey, did you manage to find out? I've got the same dilemma

[@connaway]

@@lissylouxo2965 no😭

[@lissylouxo2965]

@@connaway ahh man😩 if I find out I’ll be sure to let u know🌸