A great addition! will stay tuned for the modifications!
@markferrick10 Жыл бұрын
Nice video. As far as 2 fans, it has been noted by other folks that the internal fan will actually block air flow when used with an external fan. It would be interesting for you to test it out. Looking forward to your laser series.
@CreatedWorkshop Жыл бұрын
I'll have to give that a try, thanks for the comment!
@Chaos3dPrintWorx Жыл бұрын
Thanks great video!
@doroscnc Жыл бұрын
Nice work
@CreatedWorkshop Жыл бұрын
Thanks so much!
@Chaos3dPrintWorx Жыл бұрын
So I have the 3000 chiller and use distilled water what treatment can I put in water to where I can not have to change water every 1.5 weeks? Right now I am not using it daily either. What do you recommend?
@CreatedWorkshop Жыл бұрын
I simply run distilled water without treatment in mine and it works great!
@Chaos3dPrintWorx Жыл бұрын
How often do you change it out?
@CreatedWorkshop Жыл бұрын
@@Chaos3dPrintWorx I haven’t changed it yet, and not sure exactly when I will. Just not something that’s crossed my mind and the laser works perfectly still haha
@freddiejames999010 ай бұрын
Hey man good video. I have a couple question I need help I messed up my machine settings everything is reversed and the support won’t answer I just got the machine and are you able to send me your sendings so I can convert mine back so my homing and axis are correct
@CreatedWorkshop9 ай бұрын
I believe this should be stock settings for the K40! drive.google.com/file/d/1pyetXP8tcZGRDeHNifW-uzLo0Ac7Rki0/view?usp=sharing
@lxxB1GB3Nxxl5 ай бұрын
What is the grid size for me to type in on lightburn? I have this same laser
@CreatedWorkshop4 ай бұрын
It's 300x200 :)
@ramonhidalgo8377 Жыл бұрын
Awesome video, can u tell me what updates u recommend and where to buy them. Motorized bed, air nozzle, extractor fan and anything else I might need please
@ramonhidalgo8377 Жыл бұрын
I found your info on what to get and where. Hope to see your videos on the update process. Thanks again for the video!
@CreatedWorkshop Жыл бұрын
Thanks for the kind words! I have a video coming out soon on mirror alignment and then once that's out I'll start getting into using the laser, the upgrades I did, how I did them, etc.
@wallaceworkshop Жыл бұрын
Great video. Is that on a 120v circuit?
@CreatedWorkshop Жыл бұрын
Yep it’s on a 120v circuit!
@lxxB1GB3Nxxl5 ай бұрын
This didn’t help with me setting it up at all, LOL. I can’t get mine to put out power and now my grid on light burn is all messed up
@CreatedWorkshop4 ай бұрын
What have you done to try and get the laser to fire so far? That'll help me figure out how to help :)
@Bren39 Жыл бұрын
Monport: Let's give our printer to all you tubers - let them talk it up and then raise the price from $500 to $700. Plan.
@patrickhealy91 Жыл бұрын
My thoughts exactly.
@CreatedWorkshop Жыл бұрын
Actually I’ve had the K40 for nearly a year, and if you watch all of the videos dating back to January I mention the $540 price. Now the price has gone up some, but so has every other thing in the world. Price increases are inevitable, and sadly unavoidable. But, it’s not possible to retroactively update a video with new prices as they come out. If you go back and watch even older K40 videos, people talk about them when they were $350 and $400…
@icemarkom Жыл бұрын
Neither unboxing, nor the setup were shown at any point in this video. A little disappointing and misleading; especially given the fact an already very heavliy modified unit was shown.
@CreatedWorkshop Жыл бұрын
I did provide a full unboxing of the laser initially, and then fast forwarded to initial thoughts after having it a bit and setting it up.
@Reviews-Tidbits Жыл бұрын
3000 won’t work in Texas unless you have a climate control😕
@toddo35917 ай бұрын
Nice video, the product is junk, they dont work and Monport does not have the capability to support them.
@CreatedWorkshop7 ай бұрын
What issues are you having with yours? They do have the capability to support them for sure. Maybe I can help?