Just Empty Every Pocket brother ill never forget when i was young and my older cousin who got me into wheelin' told me what jeep stands for . Once you start you never want to stop. Always replace bigger and better !! Hell ya man what a Rig
@agustineable3 жыл бұрын
I can only think of one thing to say and that is “HOLY SHIT MAN, THIS THING IS A BEAST AND I LOVE IT”
@VINNY56743 жыл бұрын
I just got a 1995 grand jeep cherokee 1995 limited 4.0. Giving me lot's of idea's. Sick build
@treehouseoffroad2 жыл бұрын
Thanks for taking the time to explain the WHY behind the WHAT.
@BackyardBeaters2 жыл бұрын
IMO, the why is more important than the what in these walk around videos.
@laosgpsmapmidnitemapper94113 жыл бұрын
You really know your truck, great fun to take the tour! Thanks For Posting!
@2S1L3NT2 жыл бұрын
Totally different type of wheeling than what I'm used to here in Utah/Moab. Full time traction battle over there! One of the most over built monster ZJ's on earth. You did a hell of a job on this!
@motoboggin2619 Жыл бұрын
love the trackbar behind the axle, I did a similar design on my solid axle swap/3-link and gained 5-6 inches of wheel base with that setup.
@martinrice65412 жыл бұрын
Really awesome! ZJs rock! Great work.
@87fubar3 жыл бұрын
this video makes me want another zj
@desertadventures42219 ай бұрын
This is a nice jeep..
@nickc99672 жыл бұрын
Dude ur awesome at fab work 🤙
@baldeaglegarage2 жыл бұрын
Sweet ZJ, good info on the hubs and build!
@BackyardBeaters2 жыл бұрын
The hubs have since broke, and yukon not only wouldnt warranty them, but wouldnt even sell me the parts to fix them... Told me to kick rocks and buy another complete set... So I swapped them out for some Crane drive flanges
@baldeaglegarage2 жыл бұрын
@@BackyardBeaters No kidding? That's too bad they wouldn't warranty them. Did they know about the locked front diff?
@BrothersCustomBuilds2 жыл бұрын
New subscriber, excited to catch up on all the videos. Love how you have built your ZJ, makes me miss my old one 💪🏻
@BackyardBeaters2 жыл бұрын
Welcome to the shit show! haha
@TattedTommysTv Жыл бұрын
I gotta really clean rare patriot blue in Dallas new lift new tires etc started it at 8k just dropped it to 4800
@AGuyandHisProjects2 жыл бұрын
Pretty sweet build dude!
@RC-mo8tl3 жыл бұрын
I see a lot of Iroks on rigs from out west, do you guys actually like them?
@BackyardBeaters3 жыл бұрын
They are great for wet slick rocks which we have most of the year, and they are by far the best snow tire around.
@luistosado21013 жыл бұрын
I love it!! Iwould like to know specs of that's coilover..?
@atlasoffroader7963 жыл бұрын
one of my favorite ZJs around! 5 speed ZJ gang! question, is that a removable steering wheel? and if so how'd you go about doing that?
@BackyardBeaters3 жыл бұрын
Thanks! This wheel is removable just by unbolting it, but it’s not a quick release. I plan on doing a genright tj weld on quick release hub with a prp wheel in the near future
@atlasoffroader7963 жыл бұрын
@@BackyardBeaters what system do you have now? just a universal kit?
@BackyardBeaters3 жыл бұрын
@@atlasoffroader796 yep! It’s a Grant universal Jeep hub adapter and wheel. Both of which I got off the shelf at orielys. Just bolted right on
@Starlite1232 жыл бұрын
WOW NICE
@kirbycarter12183 жыл бұрын
This is sick dude!
@BackyardBeaters3 жыл бұрын
Thanks man! Come along ways from plastidipping logos and painting wheels 😂
@mercury91653 жыл бұрын
awesome build. only thing i don't like is the full hydro i would want to be able to drive on the highway or even the city streets
@BackyardBeaters3 жыл бұрын
I can comfortably do 60 1 hand on the wheel down the road. Takes some getting used to but it’s not bad, it’s just legality of it, and the wide tons and 42s and doved front end and lockers and loud exhaust are enough to get you in trouble already.
@martinrice65412 жыл бұрын
Maybe Consider a Jasper Re-manned 5.9. We did a swap on a 97 Orvis Edition years ago and it made a sizable difference and everything bolts right up!
@BackyardBeaters2 жыл бұрын
Ended up caving and going the junkyard ls route.
@activemanishere2 жыл бұрын
You need to gusset the cage. Those joints aren't very strong without gussets. Every racing sanctioning body requires gussets for a reason.
@trailwolfzj97622 жыл бұрын
Dam bro actually just seen more pics u killed that shit. Im assuming u did the project by urself as usual lol. Would have to say best rear chop on a zj hands down. I don't really like the look on most xj and zj but u pearled it. Hopefully I get out west soon south jersey wheeling fun but risky do to no legal spots lol
@BackyardBeaters2 жыл бұрын
Thank you. I agree, Iv never seen one I liked before, but that meant I HAD to do it, prove to myself I could make it look good. KZbin pissed me off copyrighting all of my videos for music that I used even though it was copyright free music. Which killed my desire to make videos. So it’s just Instagram updates for now, I will come back to KZbin when I’m not mad at them anymore 😂
@KurNorock2 жыл бұрын
Instead of welding your gears in the front diff (sometimes it is beneficial to not having them locked) you could have opted for a more reliable locker such as the OX locker. It can be operated by air or even better, a cable. So it would be a physical connection that is operated manually. Which is very reliable and lets you know immediately that you have positive engagement.
@BackyardBeaters2 жыл бұрын
More parts to fail man. Nothing beats welded for reliability. Ox cables rust and seize up. Air lockers leak and don’t work (I had one)
@KurNorock2 жыл бұрын
@@BackyardBeaters And a permanently welded front diff doesn't fail? Having the diff permanently locked doesn't put extra stress on the axles and cv/u-joints? Besides that, if your cable is rusting so badly that it seizes up, that is on you. It's a quick and easy job to lube a cable.
@codylee51322 жыл бұрын
Have you had any problems with mud or water getting in to the intake with the style of air filter your running. Looking for a cheap option for my ZJ.
@BackyardBeaters2 жыл бұрын
Nope never had a problem, and I have no inner fenders lol
@danielricklefs18142 жыл бұрын
What are your spring size and rates for front and rear
@thanaphanduangmongkollerd79552 жыл бұрын
How long for your rad flo coil over shock?
@chrisnat6467 Жыл бұрын
Looks like you need some stiffer spring rates . Way too much preload.
@trailwolfzj97623 жыл бұрын
Wats the length of front stretch? And the control arms, that is serious. I hope u aint cutting the back hatch off. I wanna dove nose my hatch some how 🤔 🤫. But im bout to do the front hopefuly
@BackyardBeaters3 жыл бұрын
I don’t have specific numbers on the stretch unfortunately, just went until the tires were past both bumpers. Wheelbase ended up at 130” hub to hub. LOL yeeaaahhh you might be disappointed then 🤫😂 trust me it’s gunna be sick. Have faith
@trailwolfzj97622 жыл бұрын
@@BackyardBeaters it looks good bro like the ultra4 style tirerack lol soon as u made that comment with that face knew she was gpin to chop shop. Feel like I need to make an insta just to check ur rig nowadays lol got greyjeep almost done with the clayton long arms but my black one gonna be more like ur jeep build with coilovers ... but I wanna 5.9 swap and some other things im keeping hush for now.. but know this I will figure out how to dovetail that hatch bud
@grahamsalisbury16232 жыл бұрын
Does the wheel return back to center with full hydraulic steering?
@BackyardBeaters Жыл бұрын
Yeah it does, not as much as normal steering, you gotta help it a bit admittedly
@breakitbillk54293 жыл бұрын
Goals💯💯💯💯
@edzimdahl11582 жыл бұрын
Which engine is currently in there? the 5.2 or 5.9?
@BackyardBeaters Жыл бұрын
in this video it had the 5.2
@shqiponjatellapit52683 жыл бұрын
only thing that I wanna know is , I wanna know if is on sale this beast?
@BackyardBeaters3 жыл бұрын
Everything is for sale for the right price
@gofastgang72842 ай бұрын
Could I do my wj like this?
@BackyardBeaters2 ай бұрын
@@gofastgang7284 you can do anything you want with a grinder and a welder dawg
@NikHodge13 жыл бұрын
Yewwww🤙🏽
@natewj15873 жыл бұрын
What front track bar is that or did you make it
@BackyardBeaters3 жыл бұрын
It’s an iron rock offroad frame side mount, that I cut up and made work. An artec axle side mount that I heavily modified to make work, and a custom track bar I made using bent 1 3/4 tube and 7/8 heims
@JesusisLord782 жыл бұрын
Don't you get pcm problems?
@BackyardBeaters2 жыл бұрын
Nope
@frankieoffroad2 жыл бұрын
What is your wheelbase?
@lifelongjeeper2 жыл бұрын
I’ve been wondering that too. I’m guessing around 125”.
@BackyardBeaters2 жыл бұрын
130" hub to hub
@frankieoffroad2 жыл бұрын
@@BackyardBeaters thanks.
@trailwolfzj97622 жыл бұрын
Knew u was gonna chop the back, expected better from u muh friend.. tisk tisk. No dam well everyone does that
@trailwolfzj97622 жыл бұрын
But don't get it twisted from what I seen which is one pic lol looks good when we getting some phooty tho?
@bonzheideman46203 жыл бұрын
What air Filter is that?
@BackyardBeaters3 жыл бұрын
Edlebrock filter from your local auto parts shop
@bonzheideman46203 жыл бұрын
Thanks man Just got done installing mine. Sweet Rig! Awesome videos! keep it up!
@lifelongjeeper2 жыл бұрын
You were looking to shave weight. I agree and want u to do the same. How much did you save chopping the rear? Did you do anything else to put the fat girl on a diet?
@BackyardBeaters2 жыл бұрын
According to my math the truggy conversion cut off just under 400lbs. I also hot knifed my 39.5s for the sand, which cut 12-15lbs off each tire. And lastly I added door bars (still need to add the fronts) so I can remove the doors in the summer and lose some more there too. In the future I’d like to substitute the heavy steel beadlock wheels for some aluminum beadlocks on the 42s. But for now she works great
@lifelongjeeper2 жыл бұрын
That’s pretty impressive. I’ve debated the truggy idea, or even cutting the entire top off and figuring out a custom soft top. I’d still love to do that, but don’t know where I’ll end up with it all. Regardless of what I decide, I still want it to be recognizable as a ZJ. You should do another walk around video now that you’ve taken it to the next level.
@brandonbrett48812 жыл бұрын
Bro how do you’re wipers go so fast !!! Lmao mine are so fuckin slow
@BackyardBeaters2 жыл бұрын
Good wiper motor? 🤷🏼♂️😂
@station082 жыл бұрын
Lose a couple inches tire size gain a couple ponies in throttle rsponse.
@BackyardBeaters2 жыл бұрын
Lol yeah then I’ll just swap out the 1 tons for stock axles to get my ground clearance back too!
@ramz38903 жыл бұрын
наикрутейший монстр
@beaumont90722 жыл бұрын
America 🇺🇸💪🏼🤙🏼🔧🔩
@thoren01 Жыл бұрын
Holy shit how much money do you make to afford this 😭😭
@BackyardBeaters Жыл бұрын
Cost break down video coming soon actually so stay tuned