Monster Moto Mini Bike Build | The Resto Mod 212cc Engine Swap

[@mlindsay527]

My uncle and I built a go kart when I was a kid. One of the best childhood memories I have! Every kid needs an uncle like you, keep up the good work! Oh, and make him wear a helmet, all the time!

[@KartFab]

Yes! Good times. Yep always have to wear a helmet.

[@alvinomelgoza2887]

Collin will remember you forever! Awesome uncle!!

[@jamespatterson8447]

If only my dad helped me with my engine swap mini bike project

[@dwaynemadsen964]

Last summer I visited my brother in another State and we did a LOT of yard work for our mother. His rototiller tires were flat and dry rotted, so we bought new ones. I was really struggling to mount them when the idea hit me to turn the tiller on its side (carb up!) and use the axel to hold the rim. After that it was a snap. Stay safe!

[@750scooter]

If you use an air nozzle on one side of the handlebar then the grip will go on the other side without lube.Great rebuild and video.

[@KartFab]

Oh dang! I’m going to try that next time.

[@alembattle1094]

I love your video yours is the only one with links and a walk through process

[@KartFab]

Glad I could help! I like sharing the knowledge I have to help everyone out.

[@AnubhavSanyalArts]

Amazing but the wheels are too small

[@Ryl33hz]

love all the humor along the way, great vids

[@craig666999pot]

About to build one of these soon

[@dwaynemadsen964]

Grant, are you using a Kevlar helmet for a welding helmet? THAT's a mod I'd like to see!

[@zackhemmer4731]

Best video ever..well done

[@wadewright3556]

I got a fuel tank from a Coleman ct200u. It bolts right up and puts the cap on the side that sticks out.

[@goodnameyt6675]

Sweet weld on the pipe!

[@KartFab]

yeah, that made it super easy to have it pre bend and just cut in one spot and weld it to the flange.

[@gregsteele9002]

Yeah I just pull the dipstick and tip it over (slowly) to drain old oil. Drain plug is a PITA

[@sarahthibodeau6439]

Love the drop scenes laughed really hard both times 👍🏻👌🏿

[@MiamiElectrix]

Cool bike build looks great i hv to mk a vid of mine i painted it green even the rims, and added a 212cc preditor engine. So its super fast can barely keep it down. Bsipp

[@dwaynemadsen964]

14:52 CRASH! 14:57 Welding on training wheels?

[@titsmcgee5573]

If I ever have a kid, Girl or boy they will be my MECHANIC SLAVE TOO!

[@chickanfila666]

Keep up the good work ! 😂😂

[@KartFab]

will do, thanks!

[@frogglidd1951]

Thank you grant I enjoy watching your videos the only thing is I wish you'd make more I bought your plans on eBay and I've enjoyed it every since thank you for making me the best uncle I love watching your videos man I get a kick out of all the jokes you put on them thank you so very much:)

[@KartFab]

My videos are on eBay?

[@frogglidd1951]

KartFab know your plans of how to build a go-kart is not your videos

[@frogglidd1951]

My bad sorry my bad Miss wording

[@KartFab]

Ok gotcha. Glad you like them!!

[@chucktime9643]

Instead of getting a mounting plate for the engine to lift it to fit it, do you think a wood block would work?

[@KartFab]

maybe, but then wood wont hold up like steel does. There are mounting plates you just can bolt on for alignment in both the side to side and forward and backward directions.

[@chucktime9643]

KartFab yea I’ve looked into that but I don’t have a welder

[@shanephillips5452]

Really helpful

[@MarkusKnowsHow]

Is that the same engine I can get from Harbor freight

[@KartFab]

yep

[@logertgogert3227]

yes its 100$

[@sunnyray7819]

+Grant, You messed up, now your gonna have to find a new jockey for the 300 ft. Drags....

[@KartFab]

Lol! I just have a big block that can haul my fat butt around.

[@optimusfuzion8413]

What did you do after you started it? Looks like you screwed something in the back, i dont know but it made the engine sound smoother sorry 😅

[@KartFab]

Idle speed screw. It’s a black plastic screw on top of the carburetor. Adjusts idle speed.

[@optimusfuzion8413]

KartFab Thank you man

[@rigosoto3682]

I have a small 100 cc engine I have a straight pipe exhaust for it but I want to know if it's ok to replace the stock exhaust without adding a aftermarket air filter and jets

[@KartFab]

It depends.

[@aidenr8139]

I have a 212 cc

[@jonathanayala4393]

Do you have a list of all the aftermarket parts needed to put the engine in the small frame ? Thanks

[@KartFab]

Link in description

[@christrin04]

Whats the link for the mounting plate?

[@zelazy4131]

People get mad for me riding 250cc in the homey area but I don't actually give 2 shits, I'm enjoying life and their can sit on their ass yelling :)

[@MarkusKnowsHow]

Hey there in trying to get by cheap as i can do i actually need another motor mount the put the 212cc in. What all do i need to get by cheap as i can

[@KartFab]

1/8" steel plate, a drill, 5/16" drill bit, a square, a tape measure, and a welder.

[@ScooterPoot]

I just ordered the Mega Moto 212cc, I'm guessing the stage 1 kit would be an .exact fit for this bike. Would you happen to know their Grant? Wonder if the carb inlets are the same size.

[@KartFab]

Yeah all those carbs and exhausts fit the stage 1 kit.

[@michaelbrazer4012]

Nice!

[@thatbuelldude189]

I would love to see you build a vanguard vtwin Baja heat A 18hp seams to fit nicely

[@KartFab]

18 hp needs some chopping. It won’t clear the top of the frame. My Honda gx390 stroker barely fits.

[@thatbuelldude189]

KartFab I saw someone put a 18hp vanguard on a early heat It fit without chopping

[@KartFab]

I’ve got three Honda v twins I’ll be putting on stuff much later.

[@thatbuelldude189]

KartFab can't wait to see I If I can find a vtwin I'll try to do a minibike build

[@thatbuelldude189]

KartFab kzbin.info/www/bejne/bHvXdaZ-gLJ7r8U This is a vtwin Baja heat Doesn't looked chopped

[@Itsjosebruhh]

Do you know where to get rims for a db30

[@KartFab]

Gopowersports probably has them, you can call and ask.

[@23Yoppa]

What type of welding equipment do you need

[@KartFab]

Any welder will work. Mig, stick, tig

[@beetlejuice3268]

how long is the throttle cable

[@kozya35]

Good bike 💪

[@shawnlauderdale6502]

You gotta stop crashin your mini bike bro! Lol!

[@redneckgrampa6216]

great vids enjoyed so i subed

[@KartFab]

Thank you sir! More to come.

[@chaselewis4627]

Tearin that thing up laying it down like that. Poor bike

[@ltscashoutt7590]

Please tell me where to get a throttle cable I can’t find the right one help!!!

[@logertgogert3227]

heres a link, just scroll down until you see the throttle cable then click on the green link. kartfab.com/mini-bikes/monster-moto-mini-bike-mods

[@justinwoods240]

Um that's the wrong way to put the master link on......

[@KartFab]

Says who? Care to Enlighten everybody?

[@justinwoods240]

@@KartFab I guess people can be different sometimes putting things o other ways

[@sabrom]

i usualy put 40lbs in my tires they seem to last longer then required air lb on tire.

[@KartFab]

That seems like a lot of pressure. I’m not sure the tires are built for that.

[@sabrom]

it is but i ride my bike on the street /dirt & weigh 200 lbs so got to make thos ties roll easier Lol.

[@KartFab]

pop you mean haha!

[@whothehellisgavin]

Hey man right now I'm looking for a go-kart for a budget of $300 what kind of go karts should I go for that won't put a huge hole in my wallet? And also that isn't too noisy...lol

[@KartFab]

Hmm that’s asking a lot for a little $$ I usually put $300 into a go kart frame after buying just a used roller. Good luck!

[@whothehellisgavin]

Ok thanks for the advice

[@SCOutdoors]

I have around $250 into my manco Phoenix eagle ii I have $75ish in my tires got a free cluch a $100 212 frame for $35 $20 in chain and $10-20 in nuts and bolts it sounds like a lawnmower (not for long I plan to put a straight pipe on it). All it needs is to be sand blasted, painted, and some touch up welds to get ready to sell/trade it goes about 25-30 the price depends on the deal you find people you know and how much time you are willing to put in to one

[@annamcbride5119]

I have a RX1 traxxis mini dirt bike and it was pretty cheap

[@michaelvaladez3851]

theres only a 48 tooth and 54 not fifty what do i do

[@mitchandopolis2665]

How'd you install the sprocket?

[@logertgogert3227]

uhh, its just like removing the stock one, just the complete oposite....duh.

[@jamiegettman5496]

Is it ok the have a gap in the clutch ? I have the same exact setup and the bolt that holds the clutch to the axle, in between had play in it. Do I just add more washers?

[@jamiegettman5496]

I don’t have the same clutch , I have a 35 chain and matching clutch from tractor supply.

[@KartFab]

You can prevent side to side movement with washers.

[@jamiegettman5496]

KartFab ok I thought so, thank you! Just wanted to do everything right. And the bolt is a 5/16 fine thread to hold it on correct? I’m going from the 80 to the 212 so it’s a different bolt as you know unfortunately

[@KartFab]

Yep, should be

[@jamiegettman5496]

KartFab got it all built tonight! Thanks it’s fun lol

[@cartersmith5264]

Where do you race I’m looking for a group to race with

[@KartFab]

Dallas Fort Worth, Austin, Houston. Those general areas. Google Texas outlaw mini bikes Facebook page and you can see what events we have coming up.

[@cartersmith5264]

KartFab thanks

[@saavedravideos258]

Why did u take the chain roller off

[@KartFab]

doesnt need it with the heavier chain (420 chain)

[@saavedravideos258]

What would happen if you leave it would it fit the chain or what would happen

[@Trains_n_stuff08]

All that hard work and he crashes it😂😂😂😂😂😂😂

[@kaddymorgan1625]

what is the sprocket size? both

[@KartFab]

50t rear, 10t clutch.

[@tpizzle9907]

What was the total cost of the build? Any one know if he mentions it.

[@logertgogert3227]

probably around 300$

[@ltscashoutt7590]

Can anyone tell me what he raps around the exhaust

[@KartFab]

“Exhaust wrap”

[@fredmelendez4547]

mig or flux welding??

[@KartFab]

mig

[@keeganhurren9931]

Is this a reupload

[@KartFab]

no, but it does have the same crash scene in it after it was built. The videos covering this mini bike include 1) predator engine mods released a while ago 2) mini bike parts haul released last week 3) this one

[@celerystcksjr.peterson4461]

I built It!!!!!

[@zigzagpattywag1449]

How do I get in touch with you? Checked out your site too and couldn't find a way to get in touch. Thanks!

[@KartFab]

what sup?

[@zigzagpattywag1449]

@@KartFab I have a monster moto mini bike with a 212cc predator like your video. I have a a #41 clutch and chain. Can I get a #41 sprocket for the back wheel to make it all fit? Thanks again for all your help and great videos!

[@KartFab]

@@zigzagpattywag1449 yeah the link is in the description for the sprocket they are aluminum sprockets and just bolt on to the existing back wheel.

[@zigzagpattywag1449]

@@KartFab isn't what you sell a #420 sprocket? Or is #420 and #41 interchangeable? Thanks again! Really appreciate the help!

[@KartFab]

if you read the description of the sprocket I linked to, you would notice that it says 41/420 chain.

[@marcelofraga8534]

What kind of gasoline in this engine?

[@mtnsleder2829]

Rocket fuel

[@lilgemstone8692]

Marcelo Fraga 87+ octane

[@logertgogert3227]

probably 93 would be my guess

[@يوسفيوسف-م3ق1و]

How to speed up your motorcycle

[@JetSkiBuyFixPlaySellChannel]

What engine is on your motorcycle?

[@aidenr8139]

I like trains

[@celerystcksjr.peterson4461]

What the flippen poop?? I like moldy avocados

[@logertgogert3227]

i like turtles kzbin.info/www/bejne/eX6xo6xqhapsabs

[@paulajeanbiehl299]

2010 s0 that meens im obout to turn 9

[@4912-w5l]

hannah baker

[@paulajeanbiehl299]

daus the kid no how to start his mini bike because I do I am my moms child my grandpa bout it 4 me 4 my birthday but It came in October and my birthday is November 2

[@KartFab]

He knows now haha.

[@logertgogert3227]

okay good 4 you

[@nickthecarguy-channel]

First

[@KartFab]

Here's your gold star.

[@Thejackolantern69]

#100

[@cjvalentine8931]

Take the govenor off man. It reduces power👿👿

[@KartFab]

Just wait, this is only stage 1 :-)

[@celerystcksjr.peterson4461]

Fartkab

[@KartFab]

kartfart

[@saavedravideos258]

That minibike isn’t going to last even a year because that minibike is meant for engines four horse power and under and if you try putting a 7 hp engine it’s too much weight for the frame which will end up breaking and cracking overtime

[@KartFab]

I’m 240 lbs and put a 10 hp engine on one....

[@logertgogert3227]

well, that minibike in your profile pic says otherwise...