A video testing a ported stihl ms440 Thanks for watching!!
Пікірлер: 104
@d.m_77794 ай бұрын
badass man the old saws were built on a different level
@theunknown49013 жыл бұрын
Hello, I have the same saw. Ported and same exhaust. I run an 18, 20, and 25 inch bars on it. I brought the saw from stihlusa on ebay in 2013, still runs today. I'm glad to see literally the same saw on KZbin.
@theunknown49013 жыл бұрын
I sent you an email
@williamlalo37594 жыл бұрын
That thing is a Beast. Cutting like nobody's business
@ronbrown27703 жыл бұрын
With a skip tooth that saw would have no problem taking the stock saw competition. Port work is about all you can do in that class. Since I've been watching you I've been able to get a few old saws running pretty damn good. I love my 266XP It's nice to have it running again. I wouldn't have checked the case and shaft seals if it weren't for you Tinman. Thanks.
@MickyDee673 жыл бұрын
Wow that's the first ported saw that I've seen which just wants to get at the wood and then some. Power , torque and rpms at max levels. Has to be the best one you've done.
@dackerson53 жыл бұрын
She's a runner for sure! Sweet build!
@treeassassin88333 жыл бұрын
Wow that 440 is an animal I love the feel of a ported saw u still got that big old poulan
@tinmanssaws3 жыл бұрын
Yeah its here, ill pull it back out when I have time
@Psy6o3 жыл бұрын
Two of the best saws in my opinion
@bradheck96303 жыл бұрын
Tinman, thanks for the vid's, I recently bought an MS440 magnum with a 42" bar. Owner said that he bought it to cut down three large trees and didn't need it anymore as he had three other saws. I got it cheap because I think everyone was afraid of the length of the bar. I watched your vid's and made the purchase, took it home cleaned it up and its in top shape. I also put a 24" bar on it and replaced the muffler to a duel port and changed the air filter to an HD as you have suggested. I haven't had the chance yet to put it to hard labor but it runs like a scalded cat.. Thanks for the video's as they help the not so talented.
@henrikpanczak63123 жыл бұрын
Jesus that´s a nice one! I rebuild an old 044 model with the 10mm crankshaft pin. She got only a dual port muffler, but runs great!
@Thundermuffin933 жыл бұрын
That thing is just nasty. Goes through that ash like my saw moves through box elder....ugh. Wow. Thanks for sharing Tinman!
@chuck8054 жыл бұрын
You were right when you said that ms440 was stoooooopid! Stock except for a dual port muffler? Geesh that's crazy, congrats on that build. I liked it when you said You could always more saws.... you have the right attitude and probably made that guy's day. Well done Tinman.
@tinmanssaws4 жыл бұрын
Yeah that saw was and is stupid. Stock??? Hehe I did a lot of grinding on that one, the only thing stock is the dual port muffler lol.
@hcc35133 жыл бұрын
Oh My Freaking Gosh that dam saw is the BEAST in the woods.
@jimmussetter65844 жыл бұрын
That saw rips! The 044 is one of my favorites. Good power and great balance with a 20” bar.
@tinmanssaws4 жыл бұрын
One of the only stock saws I run is an old 044. That saw runs so good I've never wanted to open it up.
@justinweaver87874 жыл бұрын
Strong saw great job on it sir very nice work.
@307j.o.a.t94 жыл бұрын
Wow that thing is wicked!! Made some awesome fire starter! Noodles will burn great and hot for fire starter. Impressive!!
@tinmanssaws4 жыл бұрын
I start all my fires with noodles for sure.. The rest goes in the compost or used as mulch around our plants in the garden. That saw is pretty stout for sure. I have another 044 on the shelf, i think I'll give it the same treatment as this one.
@robertramsden97334 жыл бұрын
I know for a fact that saw is way above and beyond factory good job with it 👍
@tinmanssaws4 жыл бұрын
Thanks, this one exceeded my expectations. Its a good saw.
@larryreno82934 жыл бұрын
Absolute beast! I can only hope my 462 will perform that well once I’ve got it broke in. Keep posting the good stuff.
@tinmanssaws4 жыл бұрын
If your 462 is ported it should for sure.
@ChippyOutdoors3 жыл бұрын
Man that thing eats! Another great job tinman 👍🤟
@susanagonzalez76552 жыл бұрын
i just go me a 440 mag i wish can have to run like that very nice work you to the saw
@jeffsalsbury89844 жыл бұрын
Nice job on the build my friend. That there is a screamer!!
@reidcar44 жыл бұрын
Wow that saw rips nice job, please wrap your thumb around top handle. Help with a kick back especially with a saw of that power.
@christophercollins34602 жыл бұрын
Very nice Tinman, dang it that looks fun
@apummakii3 жыл бұрын
Wow! is all I gotta say about that saw, great video man!
@geneberger4270 Жыл бұрын
Hell yeah..those rip cuts were impressive
@jeffc93544 жыл бұрын
Nice video man that saw sounds and cuts Great!! keep up the good work.
@tinmanssaws4 жыл бұрын
Thanks Jeff!!
@j.chrisbeck74924 жыл бұрын
One just tell you were having a total blast with the 440. She IS nasty for sure.
@tinmanssaws4 жыл бұрын
Yeah i love that saw. Guy who owns it is very very happy with it.
@dustingrannell54313 жыл бұрын
That’s gnarly my 660 has a muffler and ported and I feel like this would give it a run for it’s money
@kensmapleleafretirement4 жыл бұрын
That is my saw the 272. Just use it for firewood. Cool. I am happy with it.... Thanks for the chat... TTYL....
@Mopar-Pioneer3 жыл бұрын
Bloody awsome !!!! Now if I could only get my 180 and MS 310 to you to work on !!!!!!! Shipping from Australia sorta negatesn that idea ! LOL
@scubaseppy3 жыл бұрын
Wow does that 440 cut. I know exactly how hard old ash cuts, super impressive.
@tinmanssaws3 жыл бұрын
Thanks buddy!!
@1979augistine3 жыл бұрын
Stihl barks good when you feed her the go pedal
@sebastianleicht3 жыл бұрын
Wow, what a great build. I'm curious what a Monster you could create from a MS880!
@georgeantonaros55802 жыл бұрын
That is one badass saw !! 😎
@slimgrowden3 жыл бұрын
New to your channel brother! I love Power Saws of every kind! But the 10mm 044 was the very first saw that blew my mind! I have a Ported 661 with a dual chamber muffler and Max flow intake! The thing feels like the power and torque of a Hot Rod 12 valve! The the channel brother killer saw!✌🏻🤟🏻😎
@jasam21693 жыл бұрын
What that 10mm means
@simpleman42244 жыл бұрын
Looks and sounds like a beast, cuts like a real mad beast!! Stay safe buddy!👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
@tinmanssaws4 жыл бұрын
Yep shes angry. This is one build that really woke up after some time.
@JourneyNorthAK4 жыл бұрын
That makes some chips in hurry
@tinmanssaws4 жыл бұрын
Yeah I'm surprised it didn't clog up when I was noodling..
@marctony78993 жыл бұрын
That saw is the get money saw I get money with it I run mines with a 20in bar with the barkbox muffler it is nice man
@niggis763 жыл бұрын
That freaking thing rips for shure!
@josephcanova48103 жыл бұрын
Get her in the Wood Tinman!!!! Fricken Love It!!!!
@MrJoeakd4 жыл бұрын
jeebus Christmas. I think my poulan pro 3316 can keep up!! ps. I dont have a poulan pro and no it cannot keep up with itself let alone an 044.
@rickburk54233 жыл бұрын
Wow that ms 440 is nice
@rhyslloyd6572 жыл бұрын
What is the difference between the 044 and the ms440
@austinmcgann25133 жыл бұрын
Tinman you got some great videos! I watch them all the time. That 440 screams! If you don’t mind me asking what did your numbers end up being on this one?
@MrJoeakd4 жыл бұрын
that's one way to make kindling in a hurry.
@ForEveryonebest4 жыл бұрын
Super cuts!
@axelrose5076 Жыл бұрын
What did you all modify? do you have the opening degree from the ports for me?
@erdogansoylar88173 жыл бұрын
Let the chips flying i'll get a 044 in a few days 😁
@monkamonk4 жыл бұрын
Good running saw ,I just together a 440 myself , working on a 044 with a 10mm not sure if I should leave it stock or work on the transfers .
@tinmanssaws4 жыл бұрын
That is always the question!!
@joshuap75013 жыл бұрын
Fun way to cut kinling lol
@danielthrasher70523 жыл бұрын
That is a keeper i would not sale.
@user-ji8lm6oq6b9 ай бұрын
What would you charge me to port a 460 top end for my 440
@josteincarlsen29053 жыл бұрын
Really wanting a big stihl or husky.....ported. Nobody porting or build saws here in Norway. Can you help me?
@GreatLakesLogger3 жыл бұрын
Do you mind sharing some numbers on that saw? My dad has a ratty old 440 that I think could use a bottom end rebuild and I would like to try my hand at porting it. I know some guys don't like giving out their numbers so I understand if you don't want to.
@tinmanssaws3 жыл бұрын
Hey Joe, I don't mind giving out basic numbers here and there but I typically don't give numbers out on saws that warm as I feel it may get folks into trouble.
@GreatLakesLogger3 жыл бұрын
@@tinmanssaws that's perfectly ok. Where do you think I would be at with just a base gasket delete and a good muffler and intake?
@tinmanssaws3 жыл бұрын
@@GreatLakesLogger 440s run awesome with a dual port muffler and a base gasket delete.
@glennmurphy92973 жыл бұрын
HEY TINMAN, YOU EVER SEE THE THROTTLE LOCKS ON THE HUSKY 61'S GO BAD? IS THERE A KNOWN FAILURE PROBLEM WITH THEM?
@robgreenia63594 жыл бұрын
That saw impressive old man just picked up jonsered 2171 turbo what u think about is good saw
@tinmanssaws4 жыл бұрын
2171 is a very very good saw. I'd be happy to have one in my fleet.
@robgreenia63594 жыл бұрын
Thank you old man love video s looking forward to more there awesome heat my house wood just started collecting saws it's addictive
@shapeshifter77534 жыл бұрын
Yep yep n yep 👍
@tinmanssaws4 жыл бұрын
Lol, yep thats what I was thinking after. 😂😂😂😂😂😂😂😂😂
@fathdboy20003 жыл бұрын
I wish my MS440 ran that good....
@tinmanssaws3 жыл бұрын
Haha me too, I sold that one.
@MickyDee673 жыл бұрын
Can you tell me if that saw runs hot when you pour on the gas?
@sajanarfastrija6240 Жыл бұрын
Madein apa sinso nya bg bagus kali
@Witschor4 жыл бұрын
What about the chain? Square filed? Rakers height? Cuts insane I like the old Stihl ms 230 100° ex 120° Trans and 160° intake. Its a stock screamer
@tinmanssaws4 жыл бұрын
3/8" .050, full comp round filed by hand. Cant remember raker height. Probably just right but how smooth she cut and how nice she pulled through the wood. Id say those rakers were probably. 030". I change em up depending on time of year and what im cutting.
@Witschor4 жыл бұрын
Tinman's saws Thanks
@treeassassin88333 жыл бұрын
O I'm glad I asked b4 I just dove in I collect saws I got 28 so far but I will have more I have a huge gear drive mac but I cant find any numbers on it so I have no clue what it is I'm not sure how to find out
@calebguess87983 жыл бұрын
I wanna send you my 440 now
@ranieremendonca67713 жыл бұрын
Bom dimais 👍
@bucketofguts3 жыл бұрын
"WOW'....................
@countryboylogging49804 жыл бұрын
Have u ever ported 029 Stihl I'm wondering I'm think on doing it to mine
@tinmanssaws4 жыл бұрын
I don't work on many clamshell saws so I haven't done work to an 029. I'm sure you can port an 029, if it has ports it can be ported.
@Cervidator3 жыл бұрын
I’m gonna do that to mine. You should wrap your thumb around that handle bar, with that much power you want the brake to work just Incase.
@Mustang_Dan3 жыл бұрын
What length bar is that?
@treeassassin88333 жыл бұрын
I'm trying to port for the first time it's a original 044. Any tips
@tinmanssaws3 жыл бұрын
Those run great stock, id leave it as is. Theres not many saws i can say that about!!
@brucenicov12243 жыл бұрын
She cuts eh!!!
@onestopfabshop32243 жыл бұрын
Hahaha I don't know what this wood is but I know it's petrified says the Tinman. Petrified how? Perrified as in real dry and hard, or petrified of a Tinman saw? Lol That thing is mean buddy!