Montech HyperFlow ARGB Liquid AIO

[@metalmayne]

how does this compare to an atmos 240? I am planning a build on a a4-h20, and have narrowed my options between the hyper flow or the atmos. I plan to either mount 2x a12x25 or p12 max (I have both) so I suppose all I really care for is the rad and pump...

[@KleoYan]

Hi m. almas, welcome to my channel. Sad to say I do not have a cooler master atmos 240. Mind if I ask which processor are you using? In general, for ITX, a 240 does its job if it's of mid tier processor like i5 to i7 gen 14th from intel and those AMD 7000 series processor that does not draws above 65W TDP.

[@kitisme]

Your review has always been the most detailed one that give me all the answers 🤗 big thanks for the hard work!

[@KleoYan]

Hi Kit, welcome back and thank you for your valuable feedback. This means alot to me as some have mentioned I am too long winded. To me I do take in feedback but I choose to do my style which is to explain in full of any item I have fiddle with. Thank you too to have supported my channel 😉

[@Tmpkiwi]

The motherboard that I have only has a 12V 4 pin RGB header. I have read online that there doesn't seem to be an easy way to convert this since the voltage is different. Will I need to purchase an ARGB controller in this case?

[@KleoYan]

@@Tmpkiwi hi welcome to my channel and yes. It will be best to buy an ARGB hub to control the ARGB effects for your pump and fans.

[@claxcz]

Hello, I would like to see hydroshift TL 360 and if it can be side mounted for O11 Vision because I don't want to buy another 3 pack to replace the fans since I am going all TL fans.

[@KleoYan]

Hi clax, welcome to my channel. I see what I can do, no promises though. thank you!

[@claxcz]

@@KleoYan Thank you, looking forward to it if ever! 😅

[@KleoYan]

@@claxcz will reply to this if I do illustrated. thank you for your understanding, as I have been busy at work.

[@kinzie3915]

Hello, do you think it's worth buying this AIO as an upgrade from the LFII 280?

[@KleoYan]

Hi Ziuš, welcome to my channel, the LF2 280 is infact a better liquid cooler, due to the size and depth of the radiatore. Unless you have used it for more than 5 years, then yes, it's about time to change.

[@kinzie3915]

You know I'm using LF2 280 with 2x P12 MAX (because of the height of SOC heatsink) and I saw a few reviews of this first Montech AIO and it looks like it it similar to LF3 360 (but rad is slimmer). So I was wondering if I should pull the trigger ;)

[@KleoYan]

@@kinzie3915 ok for AMD is not that bad but the LF3 360 is of a better AIO but for Intel yes this liquid AIO is way better than the LF3 360. If you watch almost till the end 43:15, I have shown a comparison of this liquid aio against other 360 liquid aios which I have done previously kzbin.info/www/bejne/mZKVq3qJhtuKpck

[@kinzie3915]

I prefer only AMD for now.. you know why ;)

[@KleoYan]

@@kinzie3915 yup I do know. Bottom line is, the trigger is your choice. In my honest opinion, it’s not necessary to change the AIO.

[@Ajisdagoat12]

TYSM this helped me so much you are very underrated best review I’ve seen

[@KleoYan]

Hi AJplays21, welcome to my channel and thank you for your kinds words, greatly appreciated it. All the best with your build too 😉

[@KanyesNitrousCan]

Actually really good because I got a new pc and the liquid cooler wasn’t working and this fixed it

[@KleoYan]

Hi NinjaFoxEdits, welcome to my channel, do pardon me for the late reply. I am glad your issue is fixed. 👍👍👍

[@father3863]

I lost my amd cooler bracket that come with the mobo does Montech include that with the aio?

[@KleoYan]

Hi and welcome to my channel. Nope it does not. Contact your motherboard manufacturer to see if they are able to send you a set.

[@Sal1]

this the best aio review i have ever seen! thank you so much!!! the amount of details in this video are priceless!!!!! you helped me just finishing my first pc build! thanks!

[@KleoYan]

@@Sal1 hi ya welcome back and thank you for your valuable feedback. I am glad this content did aid you out 😉

[@aishwaryasharma2949]

Thank you for the review. Helped me make my decision. Montech really on the rise looks like.

[@KleoYan]

Hi Aishwarya Sharma, welcome to my channel. I am glad this aid you in your decision. All the best with your build too. 😉

[@russellbower2557]

Smaller fan hubs and longer blades I think would move more air

[@KleoYan]

Hi russell bower, welcome back. That was what I was thinking too, but still, these fans does perform pretty good.

[@340havoc]

Dang, too bad they didn't use the same fan style as the rest of their own brand fans included with their cases. . Missed the mark there. Doesn't look like a bad unit though. The main reason I was looking at it was to have a bolt in AIO to match the Montech case fans. Thanks for the review, solid work!

[@KleoYan]

@@340havoc hi welcome to my channel. I have good news for you. The Metal P12 Pro fans will be release at late Q3 of this year. 😉

[@TheLhicks26]

The fans match the montech air 903 max case fans

[@KleoYan]

@@TheLhicks26 hi welcome to my channel. Nope it does not match. The Air 903 Max case is using the AX/RX fans which has a halo ARGB around the fan frame. This AIO fan ARGB is on the blade. It’s different.

[@wildguy912]

Can i run this cooler on a 7800x3d?

[@KleoYan]

Hi Wild Gui, welcome to my channel. Of course it can. It can cool my 7950X and your 7800X3D is so much lower in temperature. It will be perfectly fine to use this Liquid Cooler.

[@mercurio822]

First, keep upp the good work.

[@KleoYan]

Hi Mercurio, welcome to my channel and thank you for the encouragement 👍👍👍

[@mendycayetano5557]

Hello, where I can find the screws and nuts for the 115x please?

[@KleoYan]

Hi Mendy Cayetano, welcome to my channel. at timestamp 11:57 (the backplate) at timestamp 12:20 (the screws standoffs)

[@mendycayetano5557]

@@KleoYan Thanks for the quick response. However, what I was trying to say was where I can find those nuts and standoffs to buy them because I have the AIO without the 1151 mounting accesories

[@KleoYan]

@@mendycayetano5557 oh ok, I have no idea if you can purchase them. why not seek montech support, they might be able to aid you and to send you those accessories. www.montechpc.com/en/contact.php

[@mendycayetano5557]

@@KleoYan Thank you for the information, I will

[@KleoYan]

@@mendycayetano5557 you are most welcome. All the very best 😉

[@rinx_stealth6527]

I have no rgb or argb headers on my motherboard, what do I do?

[@KleoYan]

Hi RiNx_Stealth, welcome to my channel. you can purchase an argb controller if your motherboard does not have any argb header. www.amazon.com/gp/product/B0CL9XP5MB/ref=ox_sc_act_image_1?smid=A1BCKG4OE2CKC4&psc=1

[@vaughn1804]

Always the best, most detailed reviews 👍

[@KleoYan]

Hi Vaughn, welcome back and thank you for feedback, greatly appreciated it 😉

[@napoficial7123]

Beautiful review ! Muchas gracias ❤

[@KleoYan]

Hi ya NAP Oficial, welcome back and thank you. Greatly appreciate your support too 😉

[@MikeBob2023]

Thank you! 🙏🏼

[@KleoYan]

Hi Michael Bobczynski, you are most welcome 😷

[@MikeBob2023]

@@KleoYan Also, I agree with you about the *Montech* branding on the pump block cover: I believe their *triangular* logo would look much better. 👍🏼 (But it still looks okay; I'm getting the black 360mm version to use in my King 95 Pro! 😁)

[@KleoYan]

@@MikeBob2023 hi thank you and yup. I prefer the rectangular logo too. Do share with us your thoughts experience once you have completed your build too 👍👍👍

[@MikeBob2023]

@@KleoYan Will do! 🙂