This is The Best Upgrade You Can Do - Longer 20W

[@qapla]

Thanks, Ken. Since I'm not ready for a laser just yet - I am looking forward to the advances yet to come and, hopefully, lower prices across the board for diode lasers

[@MoonpieCreations]

As they get more powerful I think the prices will come down for the 20W ones. Well I hope. Most of us only need a 20W.

[@darrellreed7044]

Great video! Thanks!!

[@MoonpieCreations]

Thanks.

[@maddieadams75]

Thanks ❤

[@MoonpieCreations]

You're welcome 😊

[@MnemoHistory]

How many passes cut through the poplar at 80mm/m?

[@MoonpieCreations]

It was one pass.

[@MnemoHistory]

@@MoonpieCreations do you mind sharing your settings for that so I can try to attempt it? It took me 7 passes at 100 % with 2mm/s on my 20 w Ray.

[@MoonpieCreations]

@@MnemoHistoryI used 80mm/m at 100% power. Mm/s is used for fiber and co2 lasers mostly. Blue lasers use mm/m

[@igcreates2760]

@@MnemoHistory It sounds like your S-value isn't set correctly. changed it to "1000" in the laser settings

[@islandcharlie7132]

That thing is cool.

[@MoonpieCreations]

Thanks.

[@OrangeBlood485]

I have a weird question, I disassembled my Longer Ray5 20W laser module to clean it due to receiving Fire alarm codes, When I reassembled it, I have the fan on top (Not air assist but the internal one) Blowing the air Up and away from the laser (Working piece) Is this correct? I haven't tried to use it yet since im afraid I was wrong because I was not paying that close of attention. Thanks

[@MoonpieCreations]

The fan should be sucking air onto the laser to cool it down.

[@DimitriosAggelo]

I would like to ask if the lens changes to the longer b1 22watt

[@MoonpieCreations]

Sorry, I'm not sure what you are asking? Are you asking if this lens is interchangeable with the b1 lens? I am not sure.

[@MSRWorkshop]

Longer just sent me the upgrade kit to but I’m having trouble getting it to recognize the limit switches in Lightburn. Was there something you did?

[@MoonpieCreations]

I had the same issue on another LASER. It turned out it was settings in Lightburn. I found the fix on the Lightburn website. Took a little research, but it's been a while so I really cannot remember what the fix was.

[@dragonshoarddesign3094]

I just order this machine today the pro max kit it comes with everything for less than 700

[@MoonpieCreations]

Good price!

[@DeereGuy211]

So a guy could say cut out the Air Force emblem fill with resin and incorporate it into a bowl???🤔🤔🤔 Just trying to plant a little seed for a future project😉

[@MoonpieCreations]

Hahahaaha, he sure could.

[@waynegibbons352]

LASER & RADAR should always be capitalized similarly to NASA as they are all acronyms.

[@MoonpieCreations]

Thanks I thought the reviews was good too.

[@oilerfreak]

Only if I lived in America. Way too much for your northern neighbors.

[@MoonpieCreations]

Is it the shipping?