MORE HIDDEN DAMAGE found on my CHEAP Ferrari 458 Spider! How bad was it really WRECKED???

New Hoovie's Garage Countach T-shirts AND $5 STICKERS here: hooviesgarage....
FOLLOW ME ON INSTAGRAM! / the_real_hoovies_garage
Follow me on Twitter! twitter.com​/hooviesgarage
Follow me on Facebook! / ​

[@golum22222]

I had a car with a Bosch fuel pump and it sounded exactly the same and it made the noise resonate and sound like it was in the door, might be worth a look 👌 p.s. it only happened when the pump warmed up, took ages to find out what it was.

[@joki6395]

me too, i think the fuel pump is the problem, I have no doubt its the fuel pump

[@alishan8880]

Pretty good area to look at

[@dj_spaulding]

I also had a car with a fuel pump that made that exact noise

[@ruikazane5123]

This! Put this up so they can see this!

[@skmetal7]

The fuel tank and pump is in that location isn't it?

[@michaeljwilson125]

I used to resolve NVH issues as a former exhaust system engineer. After seeing a few of the videos with the Diablo, I'm convinced the issue is a mechanical resonance issue and not acoustic. I doubt microphones will be able to locate the problem. You will need to place some accelerometers in the suspect areas and feed those inputs into some kind of data collector to find what area/component is resonating. Perhaps the cheap way to work this process is try putting some weights in the suspect areas to see if it changes as mass will affect the resonant frequency. So give up on the microphones, they won't help!

[@nhojyelbom]

pico scope with nvh sensors

[@georgeanddaddecker7563]

Is that why some exhausts have weights welded onto them? To prevent resonance noises?

[@NickKautz]

The Diablo noise is the air bypass release if it's coming from the passenger engine area. There's also an air balance system that connects both throttle bodies.

[@josephfranzen5626]

In terms of microphones an Omni-mic isn’t going to be able to directly locate any sort of sound. These mics in particular are of very low quality and I’m sure the accompanying calibration file isn’t that great either. While I’m very much an amateur car enthusiast I am a professional home cinema installer and calibrator. That being said using those styles of microphones to pinpoint sound pressure level output isn’t that feasible unless you can specify the frequency range you’re searching for as those omnidirectional microphones will pick up all sound in the relative area of their placement. For reference we use $3500 microphones to measure speaker and subwoofer performance in a semi anechoic manner and even at that price range they’re considered mid range.

[@michaeljwilson125]

@@georgeanddaddecker7563 Yes (weird, huh). Placing "mass dampers" on some suspension and drivetrain components is pretty common, too. I wonder if the Diablo is experiencing some engine mount resonance that's being transmitted to the frame/body.

[@roberthuiras5885]

Does the Diablo have an oil thermostat? 94-98 volvo 5 cyl turbo engines make a very very similar moaning noise like your diablo when the oil thermostat fails. Might be worth a mention to the Wizard.

[@roberthuiras5885]

I found some info indicating it does have an oil thermostat built into the oil filter housing. Might be a good chassis ear location.

[@pleasantdonovan]

Wow very perceptive!

[@fernandoroberts3591]

may be worth a check

[@drussell_]

I was thinking it sounded like an oil pressure relief valve making noise as the spring bounced the valve... An oil thermostat would be the same sort of sound... It really sounds like a typical noisy regulator noise of some sort to me!

[@lonerider5315]

Lool nope. That’s only volvos

[@SteebMo]

I work in Automotive NVH, so here's something to consider about the Lambo noise: I see some people mentioning oil thermostats and fuel pumps, which absolutely could make a noise like this. What might make it WAY more audible from inside the vehicle cabin is if the vibration is on one of those lines that's touching the body of the vehicle @9:50. It can wind up turning that body panel into a 'speaker' for the noise. (think about how much more noise your phone makes when vibrating on a table vs holding in your hand) This would make the noise clear as day INSIDE the cabin, but might be very difficult to hear from the engine bay. If possible, it might be a good diagnostic step to try and prevent each of those lines from making contact with the body, or at least grabbing each one firmly by hand to try and damp the vibration/narrow things down.

[@martij30]

It wouldn't make sense that it takes a while before the noise appears though. Sure some lines will get warm, but not hot enough to only expand by that point.

[@miguelcoelho9303]

@@martij30 Maybe the lines only help to transfer a vibration that happens when some specific component gets hot.

[@cunningstunt9226]

Interesting theory you have there, this would indeed causes a similar noise however as this is happening at a certain rpm even when this car is stationary this seems unlikely. If I had to make a guess I would say something on the intake side of things is not aligned quite correctly and at a certain pressure is acting as a reed. Failing this potentially the return line to the fuel tank is vibrating at a certain flow rate (think like pipe knock on badly fitted central heating)… A potential diagnosis step may be to check roughly what rpm this happens at and then guesstimate the frequency of the sound… if it happens at 3000rpm and it’s a 3000hz drone it’s something rotating.. but overall just let em get on with it, they have more experience than we do with this machine (I’m not just an armchair mechanic, I work for chevron in the uk and work rebuilding b8 and b17 engines)

[@saimamerzougui7981]

kzbin.info/www/bejne/q2a9gIGrhaiKZpY

[@AwkwardYet]

@@cunningstunt9226 It just might be the cause, lately been seeing more people think that its the cause, but in the video he said it happens at idle but he had to get it warm before it started, so maybe it only happens at idle when its warm since the drive was a cold start

[@alicetaylor1001]

really appreciate you guys showing how involved it is to have these very special cars and showing the process is even better enjoy watching the mechanics thought process

[@CincinnatiDan]

“Spacers or shims” seems like a pretty good idea for mounting a structural crossmember in the backend of a Ferrari.

[@WN_Byers]

"Never buy a salvage title" 🤣

[@BC-og2mw]

Ha, ha, ha

[@Beauloqs]

In keeping with hole saws and carbon fibre tubs......

[@2tooful]

@@WN_Byers in my area they’re selling rebuilt tittles with 20k miles + for like 20k or more 🤣

[@WN_Byers]

@@2tooful 😶 daaamn. i bet that could true for my area too

[@duncangrainge]

The hammer in the uk is often referred to as “the Edinburgh Socket Set “ 😂

[@jonathancollard3710]

Or Manchester Screwdriver 🤨

[@digitalrailroader]

A favorite description of Robbie Coltrane (played Hagrid in the original Harry Potter movies) in his 1997 miniseries Coltrane’s Planes and Automobiles.

[@junkhondas481]

I like to call it a swing press

[@skozra]

Or "The Clarkson"

[@ptshyu2]

the tonya harding

[@oibal60]

My doctor bought a Ferrari (but a Testarosa) back in the early 1990's. Looked fabulous in the showroom and in his garage. However, it frequently wouldn't start and, when he did get it started, and he went out for a drive, he'd arrive home and something would have fallen off. Not kidding. He got rid of it and bought a 1996 Porsche 993. Twenty six years later, the 993 is still on the road, no CEL, no rust, no oil leaks and looks gorgeous. Oh yeah, I bought it off him back in 2005. #My993

[@2bunphettered788]

Good story. And good purchase on your part. I bet it'll go up in value. 👍

[@Riley_1955]

My old boss had a older Jaguar that was exactly as you described the Ferrari every time he drove it it broke absolute junk......To me a Porsche is a way better car to have if you actually intend to drive it.

[@ogonbio8145]

Glad to see Johnny again!

[@realcarninja]

Get all of the Jonny than you can stand at Car Ninja channel!

[@WaterfrontJustin]

Hey, Long shot because its wildly different but I had my hemi replaced in my truck and got a drone and it took hundreds of hours and several different shops but it turned out to be a pad between the intake manifold and the engine valley that was missing and that pad dampened the engine harmonics and stopped them from resonating in the intake manifold maybe your problem is as simple as a missing sound deadening pad or a missing heat shield. Worth a look

[@JSAFIXIT]

That pad is commonly removed due to a water saturation issue that becomes catastrophic failure after the intake manifold leaks. I've seen a few 5.7 hemis hydrolock because of it. It usually presents itself as a hole in the block on the passenger side.

[@saimamerzougui7981]

kzbin.info/www/bejne/q2a9gIGrhaiKZpY

[@AwkwardYet]

You're the second person i've seen talk about it being the exhaust resonating... im pretty sure this is the issue

[@White03T4RV82WD]

@@AwkwardYet he did even talk about exhaust… what?

[@JaredsGarage]

Hey Hoovie, just ran a VIN check on your 458, it has an open recall as of March 22 for the Oil brake reservoir, you wouldn't want it.... burning down, would you?

[@Mitchell.Is.De.Naam.]

Ofcourse he does, he will get more content that way. He doesn't care about most of his cars lol

[@Adierit]

That recall has nothing to do with a fire though, its for a potential brake fluid leak in the reservoir. Means he'll randomly lose breaks. Far more dangerous then it catching on fire though, because you can at least stop and get out if it does. Can't stop too well without brake fluid though.

[@stuc.6592]

Brake fluid is very flammable and will ignite on something like an exhaust manifold - a slow steady leak in the engine bay could be disastrous.

[@martij30]

@@stuc.6592 Except that brake lines rarely run through engine bays, especially close to hot parts such as exhausts. Still, a possible brake fluid leak is pretty dangerous.

[@Adierit]

@@stuc.6592 That is why brake reservoirs in the front trunk area on a 458. Congrats.

[@kevinhibbard320]

Ninja: Can I take it for a spin? Hoovie: oh, of course! That seemed so genuine on both sides, I love it.

[@mentat1341]

I love that Ninja asked if he could take it for a spin even though he has his own he is too busy to drive

[@justinclark5078]

I believe his is an automatic though. Probably wants to give the manual a try.

[@carsinthewild7883]

Also a 360 vs. a 355

[@michaeld2799md]

“We’re gonna pull the bar off, and I have an 8 pound sledgehammer.” The words of an innovative genius.

[@cayman9873]

Words of a hack

[@user-od9iz9cv1w]

Great idea with the mics but would it not have been better to watch a plot of frequency spectrum? This sounds like a resonate pitch at a specific frequency. In other words, something is resonating independent of RPM once temperature comes up and vibrations induce a resonate pitch. You would see a spike at say 400 Hz and one would have the biggest spike at the same spot.

[@muskokamike127]

That's true but you're not looking for the pitch, you're looking for the source.

[@user-od9iz9cv1w]

@@muskokamike127 The pitch tells you if you are looking at the problem or just the biggest noise maker. The way they describe it is always the same pitch sound regardless of rmp, gear, speed etc.

[@JackBWatkins]

@@user-od9iz9cv1w “I concur,” in my best and most Convincing Expert sounding voice. (Moooona)

[@batsonelectronics]

I agree. Going by loudness only is useless as the engine is loud so how would you differentiate between the loud frequencies without an O-Scope ? A VU meter just displays loudness. I also would have expected the mechanics scope done long ago when they figured out it makes the noise at rest when heated up. No need to drive to isolate the noise itself.

[@oldninjarider]

That would be classic. Spends $15K on an exhaust when a $200 fuel pump would have fixed it. 🤣🤣🤣🤣🤣🤣🤣

[@mikecook6104]

Loving the background of the wizards shop. So many goodies

[@pduffy83usa]

"will smith it" Love it!!

[@dj_spaulding]

I had a car that also made that same exact sound and it turned out to be the fuel pump. It was loud only after it warmed up, which makes perfect sense in your case.

[@digitalrailroader]

14:53 some convertible tops DO have glass rear windows; it’s just cheaper for GAHH to just have one box for their tops, and technically you are correct that boxes with that message are handled with a little more care.

[@Donax695]

yer right ser, my Z4 got glass rear window, seeing other older roadsters with wringly, milky and overall ehh looking plastic rear windows I find it to be a good solution even if it added another 5 kilos on top (quite literally)

[@batsonelectronics]

yeah, my reasonably cheap 1997 Pontiac Sunfire had rear glass and built in defroster in the glass. I bought it for around $10K when 2 years old and < 20K miles. Also had leather and power everything. No reason any car over 20K wouldn't have real glass.

[@GetOffMyLog]

Yeah even my NB2 miata has rear glass

[@pablopicaro7649]

11:20 Hydraulic press while heating the Aluminium would be a MUCH better method, especially as its a HOLLOW rectangular part - until the new part shows up

[@GothaRsk]

Yes, at 12:03 you can see the upper part is now bent inside. But it was funny moment, hopefully the part is not under high stress during driving.

[@BC-og2mw]

Yes, they need a new cross member

[@stevesnvegas9040]

But it doesn't make for good content. Remember, this show is fake and made for entertainment.

[@AeroGuy07]

I heard the collective gasp of shock from all the people at the factory in Maranello when Wizard said "8 pound sledgehammer. "

[@MrGlock509]

That’s how they fix stuff in the Army

[@mikus4242]

No, they said …even more money for us!

[@AeroGuy07]

@@MrGlock509 I didn't know they offered a military spec Ferrari 458.

[@alfie15hbk]

For the diablo try changing the O' ring in the power steering pump, the o ring might have failed and is letting air inside the system, after changing the o ring you will need to top up the power steering pump and then keep on steering left and right until the noise is gone, I have a honda crv and had the same moaning issue lots of mechanics told me different and expensive solutions that will cost me thousands of dollars however after a long search all I did is change the o ring and the issue was fixed

[@Nemesisx1974x]

hmm why not put the gear box crossmember on a Bearing press

[@richardsheil5289]

My thoughts too

[@dachine86]

Press would have been far better than a hammer.

[@PaulAmlin]

This was a really fun one! Thoroughly enjoyed the Ferrari updates and your interactions with Wizard and Ninja. Well done.

[@Naturalhighz]

Love to see the wizard pull out the precision tools

[@SD-G]

LMAO..."you're just gonna 'Will Smith it'"? Love the reference to smacking Chris Rock in relation to straightening the transmission support bar. LOL. Priceless!!

[@roydrink]

A new expression!

[@dangleebols]

No hydraulic press in the shop you can use ?

[@Riley_1955]

I'm sure he does but that way looked way better for a YT video.

[@scottmyatt6283]

Let me know if this has been suggested before!!**** I am sure you have heard it all by now…. BUT!!! Check the PCV system. This sounds like air being pushed/sucked through a restrictive orifice. If your creating vacuum in the crankcase sucking air past a seal can make a noise very similar to this.

[@topmarques]

Yep, that'd be my guess. Had a BMW do something similar when a bad PCV created internal suction. Similar moaning noise as air sucked past rear main seal.

[@kidwithaviolin]

My serpentine belt / pulley sounded like that when it wasn’t perfectly aligned. Granted that was on a 66’ Datsun 520.

[@muskokamike127]

2004 F150 Idler pulley would sound like that too.....only when cold and only at certain RPMs too....

[@capedwonder2833]

Only Ferrari ever fixed with a sledge hammer. Gotta love Hoovies garage.

[@brianferry9217]

Yeah Ferraris and Lambos are cool, but can we get more on what's going on with that Merkur XR4Ti in the background??

[@jayd9389]

It’s on wizards channel

[@jamesblonde2271]

Called Sierra's in Europe, extremly fast sports saloon with race n rally history

[@peiguy1982]

That 355 is a timeless design. Looks good no matter how old it is.

[@koosgijsman]

Last of the truly beautiful ferraris..

[@hakeemsd70m]

@@koosgijsman So the Enzo doesn't exist?

[@samueljones3668]

@@hakeemsd70m I want whatever these guys are smoking, the 355 aged like pure dogshit and imo was a regression of Ferrari styling, given the fact it came *AFTER* the F40 and around the same time as the F50 and still aged much worse.

[@JackTheripper911]

I honestly find the 355 ugly

[@JackTheripper911]

@@samueljones3668 i agree. The 355 just looks hideous in my opinion

[@drewpickard554]

Look at that Shiney Meekur Xr4ti in the ground. I miss mine so much, such a fun cat

[@uzaiyaro]

Just as an aside, it was really sweet to respond to “can I take it for a spin?” with such a happy, eager “of course!” I dunno why but that made me smile.

[@bhr788]

Seller: It was crashed into a ditch The Grand Canyon: Hey, I recognize that Ferrari!

[@terrylessmann2274]

That's why I pass on potential Wheeler Dealer cars that have been in accidents - they may look fine on the outside, but you never know what's lurking underneath. Generally nothing but headaches. And when in doubt, ALWAYS use the BFH.

[@BigJonkulous]

I love when Wizard horses around and laughs. Just the best!

[@Dozav7]

He ran away from Hoovie’s clamps right quick! 😂

[@TheSoulpapa]

I like that “merkur XR4Ti” I had one in 87. Great car. 🚘🏁🚘

[@chrisphillips2358]

Have you thought about Radio interference? I used to have a stereo that would wine up or down with the engine revs. I stuck an inline filter on it and it fixed 90% of it except this irritating whine at about 3500 revs. Coming out of stereo speakers it can be hard to realise its NOT an engine noise....

[@TheAdamjwright]

Gotta love how when the Ninja asked if he could take it for a spin he immediately said 'Of course'.

[@psychotictactoe]

Mate you notice the Cosworth in the background!?

[@TheAdamjwright]

@@psychotictactoe I didn't! I have noticed the Wizard has an Alfa 164 in the shop though!

[@tomsparks3259]

Wouldn't a press give you a bit more control over the bending process?

[@CarWizard]

Its a joke

[@TheBreadlord]

Yeah, exactly what I thought. With a hammer you're more likely to create crush points at the impact site on an aluminium bar, as well as increasing the chance of shattering an Italian-grade piece of cast Alu. Press + spreader block would be my route of attack. Doesn't look as good in a thumbnail I guess.

[@MrEeeaddict]

@@CarWizard you're not funny though

[@ebbs0000]

KZbin is not real my friend it's for the lols

[@pablopicaro7649]

11:20 Hydraulic press while heating the Aluminium would be a MUCH better method, especially as its a HOLLOW rectangular part - until the new part shows up

[@sirremusrobinson1070]

Love seeing your exotics. You make me laugh with the commentary, but each one I truly enjoy watching them come back to life. Best luck with them all.

[@onair6652]

As usual, great entertaining content, thanks for sharing

[@83Hutton]

I miss the old hoovie, most people can’t relate to buying “the worlds cheapest supercar etc” make hoovies garage great again!

[@anomamos9095]

Sounded a bit like a fuel pimp or scavenge pump. Try adding a Teflon based oil additive and a slightly thicker oil to rule out the engine

[@chrisyboy219]

Eh, I think a press and some hard sheets of metal would have been much better to straighten that cross-member. A little heat wouldn't hurt either. Now you've got one that's 'straight' and dented in along its length. Ugh.

[@TheRealAlpha2]

I almost feel like it would have been better to just fine someone with a metal shop that could cut out and weld together a new cross bar to be installed rather than bending and risking it being potentially structurally compromised. Maybe I've just been watching too much Superfast Matt.

[@tmetito3535]

I was thinking the same

[@Metal0sopher]

They should have heated the bend and used a 2x4 as a lever to gently pressure the bend out, mount it hot so that it cools and tightness in place. No issues. Hammering it cold, very stupid.

[@CR7659]

He should take it to Puddin's Fab Shop. Guy could do it in a day and make a video out of it.

[@brandonmorris2513]

The best part about these videos is when Tyler acts like a goofball around magic mike and wizard . They don’t have the same sense of humor and you can just see them rolling their eyes ! The best !!

[@ZGryphon]

Having once looked into replacing the top on a much less valuable convertible, I presume the company that made the Ferrari's replacement top is named for the sound one makes when seeing how much their products cost.

[@TheSnuggla]

From my old memory , in the 70s Peugeot (504) rally team used to use a hydraulic press to bend the rear cross member with a weight of about 500kg to get negative camber on the rear end.

[@Tracked350Z]

Have you checked the engine mounts on the Diablo? That resonance sounds familiar. It would do it mostly at idle then find a specific rpm at which the resonance would be most notable.

[@tripprogers4814]

3:27 “I’m walkin’ on sunshine...yeah.. and don’t it feel GOOD! HEY!”

[@McTwistedTwisties]

Is Tyler a Ferrari man or a Porsche man? The answer: he's a hoopie man

[@mynineridesshotgun]

Or a Lamborghini man

[@joealex65]

*Hooptie

[@crazyman8472]

Car Wizard and Magic Mike have got to be the nicest, coolest mechanics ever, giving Hoovie so much time and attention. Plus Hoovie always brings them an interesting (or at least profitable) project to work on. 😜

[@pedrobenson]

My father had a 1983 Honda Civic wagon that after warming up will make a similar noise and it was related to the fuel pump. The car will be normal but after some, it will start doing the same noise. I think you have two fuel pumps on the Lambo. That is my guess. Love the channel keep it up and check mine when you can Daily Drivers Inc.

[@davidestate]

OMG... My very first car I bought when I was 16 yrs is sitting in the back of the Garage. I still love this car... that Merkur Xr4Ti ..love, love, love it. Wizard... please show it on your channel.

[@cauf6182]

I had a XR4I in 1984. Great car. Lots of space in the backseat , haha.

[@MindsNmotors]

LOL, "We're gonna Will Smith it"

[@brucegilbert7243]

When I was on the Navy, we called a sledgehammer a fine alignment tool.

[@MrBADestroyer]

Please ndi experts speak out. You have weakened the aluminum part. It needs strengthening welds to assure long term efficiency.

[@dougpfaff4763]

No it doesn't.

[@JMichaelBreitenbach]

Anyone else geeking out over the Xr4Ti in the background?? Had a couple over the years. Wish I didn’t let them go.

[@masmotorsports]

Wow thats a clean XR4TI, my dad had one deff a different car.

[@ThaMythbuster]

I'm sure it's been said and you've checked it already, but that sounds exactly like a vacuum leak I had once. And it only started making that noise when the engine was warm, I guess because the different metals expanded slightly differently.

[@tonya9955]

Wizard should have just put that crossmember on a press, and press it back flat.

[@richardmccoll9297]

I related to the BMW hammer. I am a potter and have a hammer with “QUALITY CONTROL” written on the handle and it has been well used.

[@BradenKennelly]

Hoovie buying a decent car? That's impossible!

[@plus790]

Look forward to hearing your Diablo with the Capristo. I just bought a Porsche 987.2 Cayman S that already had a full Capristo headers and valved exhaust. Love it.

[@richardpatton2502]

Taking a hammer to fix a Ferrari. Jeremy Clarkson would be so proud 😂 All the best to everyone

[@cayman9873]

Not if it was his car

[@glenerickson358]

Cletus McFarland too

[@Jose-rj6oe]

"will smith it" 😂😂😂😂😂😂😂😂

[@woocash2139]

news flash for the wizzard, aluminium can't be bent back and forth when cold, it cracks this way. Not a good idea. If you don't car about it cracking why not use a press instead of the hammer, it will give you more control

[@TheTarrMan]

I hate to say it but maybe it is something with the transmission. Maybe something with the pilot bearing. That's all that's really back there that spins when idling. ⚠️ Hoovie try this : Get the noise going, press in the clutch, shift to neutral, let the clutch out (with the car still rolling), then pressing the clutch again.

[@othersideofawi441]

I laughed so hard when wizard hit the crossbar with sledge hammer like nothing else happen 🤣 so that's perfect solution when you don't have the part hahaha.

[@kencraig6526]

What happens if you throw it into neutral at that speed and hold rpm

[@austingreen6042]

Loving the FORD SIERRA XR4i in the background... more content on that please !

[@pleepler]

If these microphones can filter out frequencies other than the frequency of your noise, that would help a lot. As funny as it might seem, you need to eliminate as much noise as possible to find the right kind of noise

[@airthrowDBT]

Needs a software bandpass filter

[@pleepler]

@@airthrowDBT Pretty much, I just couldn't find the right words for that. Thanks

[@treemonkey321979]

I like how hoovie didn’t even hesitate when the guy asked if he could take the car for a spin.

[@christianboyd4635]

You guys are making me very nervous smashing a large piece of metal 2 feet from the bodywork of a Ferrari, you're crazy haha.

[@johngaither3830]

1976 and 77 Chargers with the 400 ci lean burn engine sometimes had an exhaust resonance noise. The factory approved correction consisted of a U shaped 6 lb. weight clamped to the right side exhaust pipe near the engine. Worked every time. Why the right rather than the left is beyond me. Chrysler came up with novel approaches to some problems.

[@trvr82]

Hoovie: "I think you need to put your hips into it." Wizard: "I don't wanna go too far."

[@rotorblade9508]

that frame can be fabricated or one similar that is stronger and fits can be made either using bolts or welded like the stock one. I think guys that weld radiators can weld the parts and sheet metal can be laser cut pretty cheap. It would cost like $300 for the laser cuts parts

[@johnmichaelkarma]

I wondered when I'd see the Wizard fixing something with the BFH.

[@sean6992]

Btw what's a bfh

[@johnmichaelkarma]

@@lilorbielilorbie2496 Yes sir,when all else fails bring out the BFH.

[@Dying2Live220]

"You're just gonna Will Smith it!!!" - Hoovie. New classic line!!! Love the videos as always!

[@honda4185]

Look at that stunning Sierra Cosworth 😍🥵

[@TBird100636]

14:43 - They must sell tops for cars that have a glass rear window and just use the same box on all to save money.

[@gman3725]

The 458 is by far one of the nicest Ferrari’s ever made

[@hakeemsd70m]

Agreed, and the 458 is easily the greatest mid-engine V8 Ferrari of all time.

[@zoefaith120]

The wizard with a hammer and the ninja with his loving hands with the top!

[@ExUSSailor]

You're well on your way to buying the Wizard another yacht!

[@mindblownwatcher8536]

We used to use the old style single post car lifts as a press ,to bend things like that straight. You could be very precise modulating the air lever on those.

[@thedirtlifesupreame]

Instead of using a sledge hammer, use a hydraulic press.

[@montestu5502]

He would get fewer comments then….

[@TylerL220]

Always love seeing car ninja in these

[@dyalanbrain001]

I’m so glad Tyler is actually doing the under tray. A lot of others were also screaming to get him to just do

[@ivannarvaez367]

That 355 is gorgeous, Tyler.

[@weets69]

It’s nice to see, when all else fails, backyard brute force mechanical repairs prevails. The Wiz is the man!😎

[@rogerparker3979]

I would love to have the red Mercur XR4Ti.

[@bradleycross5987]

that Ferrari almost sounds like an old F1 car. Excellent

[@peterhess6039]

The flat-plane crankshaft gives it that exotic sound

[@alexeiutgoff7955]

Diablo is an easy fix. And I'm amazed that everyone missed it. Even the comments. Not a single person has mentioned it. You have to pull the engine and replace it with an LS.

[@solidhamster]

I thought by law manufacturers are supposed to keep parts available for at least 10 or 15 years.

[@JackTheripper911]

Why the hell did you believe that utter nonsense?

[@solidhamster]

@@JackTheripper911 because I was working at a Suzuki dealership in Canada. When Suzuki decided to pull out of Canada, the dealership became a Mitsubishi dealership. But we were told by Suzuki that we have to be able to maintain a supply of parts for at least 10 years

[@bikinigarage3240]

Thanks to Wizard for not referring to us potential customers as jackasses, etc like on Dan's channel. Jeez there's a lot of corn fields in Kansas! Keep us posted on the 458. Great Vid!

[@MrJwc1234]

My favorite thing is when Hoovie taps on a hood of a car. I laugh every time, he’s so excited to possibly buy another car.

[@terrylessmann2274]

With a ring on his finger. Didn't matter this time but he does it to metal roofs too.

[@longjohn77]

I find it rude and annoying.

[@seanb9698]

@@terrylessmann2274 15:28 he always slaps the roof with his right hand and you can see here he doesn't wear a ring on that hand

[@MrJwc1234]

@@terrylessmann2274 Yeah I'd be careful.

[@mham83]

Is that a Ford XR4i in the workshop? 80’s Fords we’re a thing of beauty.

[@psychotictactoe]

XR4 or Cosworth?

[@SomeJuanPlay]

The best part about this Ferrari is that you can drive the hell out of it

[@JackTheripper911]

Until i breaks down 50 feet down the road lol

[@xFlow150]

A Fast Fourier Transform would absolutely be the best to look at the Lambo's noise in my opinion. You even have a reference, because the moan only occurs when the engine has warmed up. So, you can look at the frequency spectrum of the engine without the moan and then with the moan and compare it. The microphone that shows the highest amplitude at the frequency where the moan occurs lies closest to the source. Then, you can zoom in on that area and do the test again to get even closer to the source.