More Jeeps, More Problems!

[@johnbalducci7433]

These are my favorite episodes with Chris and Becks.

[@StormbornJKU]

I would absolutely love to see more content on the LJ! Honestly with all of the maintenance you guys need to do you’ve got hours and hours of content to upload. I’d love to see it all!! Even if it’s stuff I would never be doing or come across it’s still just awesome to see the way you guys work and the logic you guys have when you do things. Love the videos. Thanks!

[@gogerwi]

Hope Chris shows the Ram 2500 brake booster rod modification when they get to it.

[@StormbornJKU]

@@gogerwi what ram 2500? The tow truck? It’s a Ford. Either 350 or 450 dually.

[@gogerwi]

@@StormbornJKU No Chris is going to use a Dodge 2500 master cylinder on the Jeep booster to get more braking for the 60's bigger brakes. He and Bec mentioned it at the start on the build. Dynatrac just finished my Pro Rock 60's and I'll be needing to upgrade my bigger brakes also on my LJ. Hoping they will show a little detail of the adaptation of the 2500 master cylinder to the Jeep booster.

[@StormbornJKU]

@@gogerwi ahh ok. Yea they put out so much info so often that I just have missed that lol but sounds cool!

[@richsmith3120]

Keep on cranking out the maintenance vids this Winter! Happy Trails to all of you!

[@Barkleefan]

I appreciate that you show timelapse of the tedious things like cutting the motor mount out. These are the things nobody shows and seeing technique helps tremendously for first time fabricators.

[@jeffro8373]

It's a great thing you guys are showing everything that's going on with the rigs. Anyone that's thinking of doing mods can use your videos for reference and ideas!! Good thing your fenders stayed on 😉 !! Merry Christmas Lite Brite Fam!!!!!❤❤💯🤙

[@donwilliams3626]

Chris this is a nice demonstration of how you do multitasking in the shop. Happy Christmas and a Blessed New Year to the whole Lite Bright Nation.

[@gregholmes3661]

Love the videos with Bec and Chris, it’s the only ones I watch

[@bullittdog4352]

Man , I’d a taken a spanner wrench to the cylinder cap before taking it off the power dove ..it looks way loose. Some hydraulic ram manufacturers are too cheap to put locking set screws on the cap and they’re known for backing out. And thanks guys , I just got on Summit and bought the same low profile pan for my TJ.

[@prepareandprotect]

My Dad taught me to use sewing thread to hold gaskets in place. It works!

[@pennypackmtb2542]

Lots of stuff and no cutting corners. You all do it right the first time. It may take longer, but it saves time in the long run and there's more up time. Merry Christmas.

[@royvangemert1902]

Great work Chris, you're the reason I watch the channel. I hope they dont take too much advantage of you.

[@anarchyrun8253]

You guys totally need to go snow wheeling up Cedar Mountain area... I need somebody to pack the snow down so I can get in with my mildly built rigs lol

[@letsrollmotorsports2787]

Hey guys, love the content across the page from builds to wheeling and events! I just watched the part about welding the 3/8" thick plate on the link brackets... The corner to corner joint you welded requires a 3/8" fillet weld which you put in there in a single pass. Welding industry standards, AWS and CWB state that a single pass weld shall not exceed 5/16" when running wire smaller tha 1/16" in diameter. I am a career welder fabricator and would recommend doing multiple pass welds on anything thicker than 1/4" or 1/4" fillet weld.

[@jjansen987]

I love the fact you are working on multiple rigs at once. Merry Christmas 🎄🎁.

[@markcargile]

I’d really love to put that rockzilla suspension on my LJ, so I’m loving this series. I’ll be stock engine and trans though, so hopefully there won’t be any interference issues. Looking good Bec!

[@backwoodstherapy]

Merry Christmas to one of my favorite channels. If I lived on the west coast Chris would be the only one I'd trust to do major work on my rig. But I'm not so I'll have to find someone else.

[@schweglerd]

The best part of this video is where Kevin pretends he’s gonna take that ram off the trailer and then the next shot is Chris doing it…

[@Adrian-rn1ym]

I live in Canada and more than once I’ve been caught out in the fall at night with no doors and top and ran the heat pointed straight at me the whole way home lol. And Kevin I love how you say I have to do a head gasket hahahahah

[@mike-pl8sn]

If you’re low on water often, the temperature gage won’t work because there is no water to sense temperature the heater will stop working also

[@slowcountryboy476]

Perhaps a Dana 18. There is a two shifter kit that allows high range or low range in rear wheel drive, and front wheel drive or rear wheel drive in high range or low range. It is small and short, about 11" in length. It is gear - gear also as opposed to chain drive. I favor gear - gear. Might fit your need...

[@trjnsd6874]

18th! A Merry Christmas! More things to work on - Yea! Merry Christmas to the whole LiteBriteNation Family! When ya play, you gotta pay. At least y'all have the skills and motivation. That's going to be one Sweet LJ! Kevin, So much fun getting messy! What? No Bikini Car Wash?! LIteBriteNationFabricationSeason!

[@calvinh.8882]

When y'all replace the wood decking on the trailer, give the new wood a couple of months to dry out, and then get some good wood stain sealer to treat the wood and it will last a lot longer.

[@americonoffroadadventures8132]

Always good to do your own work. So you know job was done correctly. Then less issues when wheeling.

[@RCCrawlerz209]

Merry Christmas guys! Hope you guys got to spend it with friends & family & the ones you love! You ya'll had a great one! ⛄☃️❄🎄🎁 & If we don't hear from you guys, Happy New Year to you all! 🎆🎇✨🧨🎉

[@rob5529]

5.3l and 4.8l are the same exact block. The 5.3l has a different crank for stroke, the stupid afm, and vvt crap. Internals and heads interchange

[@luckypenney116]

Yeah, I’m the open top with the HVAC on type.

[@jaymohler2941]

loving this LJ build!

[@edwardsimmons3721]

Looking forward to seeing the progress.

[@levasseurfr]

1:20 everyone is going black because once you go black you never go back 😂😂

[@ajfarson]

I'd do a Cummins R2.8 on that Jimney! It is a perfect project for one.

[@LiteBrite]

If this motor is completely bad then maybe but for now it’ll just get a head gasket and water pump

[@305racing6]

Happy to help with Suzuki parts, quite common in Australia. Let me know what you need

[@raustin679]

How does one get on Chris’s schedule to do some work on my rig?

[@aaronmcclaskey5940]

Love the title of this one. MORE JEEPS, MORE PROBLEMS. You do realize that JEEP stands for Just Empty Every Pocket. haha

[@johnwaldron5244]

Chris and Beck get that LJ going can't wait to see it finished. If Kevin wants to keep making wheeling vids and break shit every chance he gets he better get his hands dirty and put in a day's work!

[@eddias5641]

Merry Christmas Lite Brite and wishing you a Happy New Year. Thanks to all of you for all you do sharing your content.

[@davewhanger6722]

Hope the light Bright nation and crew Had a very Merry Christmas keep up the great work !

[@donmcneal233]

Hey kid! Good vid again! Great to see Beck... oh, & Chris too...,lol! Yeah..., a lot of goings on in Day Care, but always learning somethin'. Kevin; get that trailer flat replaced, better wood this time & poly clear-coat it a few times. It'll last longer. Hope all had a happy! Be safe out there! AMERICA FIRST!🌨❄☃🎄🎉🎊

[@markw365]

Check out the midnight metalworks cases, they're smaller than most .

[@gregoryh4601]

Merry Christmas you Two and Thanks So Much in Today’s Lesson. Be safe

[@LTUSATV]

I'm confident you guys can do anything on a Jeep!

[@rodvanness3973]

So correct me if I'm wrong, but isn't the 4.8 LS block virtually identical to the 5.3 LS block? I think they have the same bore size, just a different stroke (crankshaft).

[@Garage_Speed]

Correct. There are 3 things that are different. the pistons are flat top or dished, the rod length and the crank stroke. but the block does have a "stamped" next to the 4.8 casting mark. which would have been stamped by the manufacturer, to identify it as a 4.8, But im 100% positive, this was rebuilt.

[@yellowcreekcrawlerrc7133]

Merry Christmas and Happy New Year to you all. Love the show.

[@doug8949]

Good video, Kevin when it rains it poors that is how my luck has gone so far. Merry Christmas.

[@garretlewis4103]

Seems to be a lot going on. Merry Christmas guys! Jesus, the reason for the season! Yeah, we take our vehicles through the car wash. Use to wash them by hand all of the time. Busy schedules changed that.

[@tdawgnok]

Merry Christmas LiteBrite fam!

[@dennisrhoades5706]

Chris & Beck are awesome. Know how to build Jeeps, NOT store bought new Jeeps. LJ is best vehicle on this channel!

[@TLEGRAM-_ME_BrittanyWilliams1]

ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ☝️

[@evintacy7272]

I love this channel! Merry Christmas 🎁🎄 Happy New Years as Well to Lite Brite Family ❤ 😊

[@deanretzlaff2253]

Hey Kevin…good thing you pulled the Ram off the trailer…oh wait…your hat…looked just like Chris’s hat…oh wait ..that was Chris..lol..thank God you have Chris…lmao

[@cesarquintanilla1264]

Merry Christmas Lite Brite Nation! 🎄🎅

[@craigerss3926]

Merry Christmas Kevin, Brittany, Bec, and Chris!

[@jeff750r]

Question with the low-profile oil pan- what do you do about the dipstick and having it accurate to the pan?

[@Garage_Speed]

the pan is wider in the sump area, should have the same oil "level" when filled. actually holds a hair more.

[@RedHawkish]

Kevin - what about replacing the boards with aluminum "boards" - ? not sure if that's a think or not

[@mufflerbearingR32]

If your ever in the Ft. Worth, Tx Area you really need to take a tour of the Summit Racing warehouse/Store Front! Its a Big place! Merry Christmas!!

[@Garage_Speed]

We were there during drift week. Thats where I got all the Parts to fix the rear brake issue on the vette!!! 😃

[@danielpaulsness6951]

Merry Christmas and a Happy New Year

[@Zukgod1]

My TJ has AC and heat. No doors or top. Still nice to have.

[@stacythomas4017]

Did someone say Portals!?!? 🤩

[@rachelbrinkley3240]

For the lil Suzuki you could engine swap it with the J20A from a Vitara/Tracker that would be cheaper ad get more power too

[@LiteBrite]

But no turbo. No turbo means no go. I like spooly boys

[@rachelbrinkley3240]

@@LiteBrite You can turbo up a J20A plus it has more displacement.

[@daboenterprize8265]

Merry Christmas 🎄🎁 you guys are awesome ❤🎉🎉🎉

[@BeckTools]

Beck, you welds look great, your strategy for dialing the settings are spot on. I'm sure there are and will be trolls saying you did it wrong. Fk em they are "internet welding pros"

[@MartinKrafft]

where do you think the front drive shaft goes?

[@mikaelljungberg1019]

Did you know that there is watercooled alternators spesific for offroad use, they dont get full of dirt when The chit hittas The fan

[@davidhorsey7164]

Toyota celica steel case 5spd has same spline n shaft as transfer as sierra and 2litre from same or later model 1.8 litre from a Jimny fuel injected will fit but a commodore v6 and auto transmission can be fitted aka Chevy v6 or Buick v6 much the same I think just an idea

[@billwaterhouse5894]

Merry Christmas my awesome peeps ❤

[@paulmartin769]

Merry Christmas Bec, Chris, Brittany, and Kevin!

[@NeoMK]

Steel oil pans FTW.

[@AT-JT]

Issues and concerns are really opportunities!

[@rogersayer5714]

Who makes the black front fenders you are using?

[@Garage_Speed]

On the CJ? i am not sure. It was purchased this way

[@tymatt4555]

Looking good

[@lukewalker1116]

Body lift won't work?

[@hotrod76.]

I was hoping for a crop top and short shorts.!! Damn it.!!!

[@hotrod76.]

@TLEGRAM_-ME_BrittanyWilliams1 scam??

[@frediefarmer]

👍🏽🇺🇸👍🏽 Merry Christmas to you all

[@davidhorsey7164]

If using a v6 in sierra use a Toyota hilux aka Toyota mini truck ln106 transfer case trail gear in usa have parts and piranha off road in Australia

[@treyhaberman]

Wonder if a built dana 300 would work for you. They are pretty small

[@guycarroll5366]

Merry Christmas

[@paulhasty8388]

We have a no touch car wash that has no brush's so it's safe for fender's!

[@BeckTools]

Kevin! is that just the lighting or are you getting some white hairs? I'm 39 and getting some white in the fro as well. lol I never noticed until you mentioned your hair. lol

[@LeandroFTW]

I would just mod the body.

[@paulmartin769]

I wouldn’t laugh about that mirror after the $15 pins…….a door mirror is probably a kidney or lung.

[@michaelrobbins9679]

Bec is the best understudy/ assistant/ shop partner! Do they make fire proof leggings? 😆

[@rayat895]

You underestimate the power of Jeep heaters... I've ridden in a naked Jeep with the heat on in 60s degree, rainy weather on the highway and was comfortable enough in a T-shirt.

[@Garage_Speed]

owner lives in the CO Springs. it is getting a new Soft top and doors. and the AC is for, when he takes it to Merus adventure park in TX.

[@fanof03always]

Ebay or Amazon for gasket kit

[@nilz6432]

"Then we spill hydraulic fluid over ourselves".... Kevin said and let Chris spill hydraulic fluid over himself

[@TLEGRAM-_ME_BrittanyWilliams1]

ʜɪᴛ ᴍᴇ ᴜᴘ ᴏɴ ᴛᴇʟᴇɢʀᴀᴍ ɪ ɢᴏᴛ sᴏᴍᴇᴛʜɪɴɢ sᴘᴇᴄɪᴀʟ ғᴏʀ ʏᴏᴜ☝️

[@zr2dad5]

swampers. i love swampers.

[@bobchronister3429]

Was that a bottle of "Head gasket Sealer" stashed away in the front part of engine compartment in that Suzuki? Hmmmm

[@tinyswampers]

You can get that waterpump at autozone.

[@myfavmitsubishi1917]

Where's the little mitsubishi truck??

[@MM4X453]

No top A/C on all summer.

[@brianhubbard4175]

Deck the trailer with composite decking and it will last forever.

[@jasonsmith697]

Where's the BRONCO

[@indojeep2623]

What I heard was the only thing not broken is a jeep. Lol

[@jojothepopoman]

You can't fix the first problem until you've created the second problem. R.R.

[@rodhester2166]

Progress.. :)

[@TwistedOff]

👍

[@MichealMcConnell2540]

Water pumps are supposed to suck

[@chillis28]

👍❤️ #Jellynation

[@Michael_Fortney]

Order off euro 4x4 and import it

[@codytownsend3951]

Seems that Chris and Bec's chemistry is off?

[@johnpaul9606]

# pissed, Lots of videos, NO JELLIE

[@angushoover8670]

And once again, Kevin shows why Brittney can't have or keep nice things.

[@tomtucker8849]

Bec, you are too gorgeous.