More Truck Updates and 2 FEET of SNOW!!

[@MillennialFarmer]

Use code FARMER50 to get 50% OFF your first Factor box plus 20% off your next box at bit.ly/4aSl82Z!

[@nickgibb4687]

cant belive you eat that garbage

[@dustydavis1333]

If you didn't read the direction make sure the bulbs are in right the l.e.d. chips left and right for the correct light refraction

[@buckrogers2828]

Could have cleaned the trucks down first and deloused the hubs and painted before putting bits and wheels back on!. Also polish the wheels with MER then water etc run off them and clean easy and can polish trucks with it also.

[@godoftheinterwebz]

You dint link to the polisher guy

[@Redacted00010]

@@godoftheinterwebzthat’s what I was thinking as well :/

[@adammiddleton4037]

Buddy busted his ass to get all that polishing done in a day! Good job!!!

[@ringobeam7620]

Zack you're the best KZbin Farmer the World has ever seen..

[@MillennialFarmer]

I highly doubt that

[@feedinc2735]

Holy shit... That guy looked like the chimney sweep on Mary Poppins after all that. Kudos for the hard work. Paid off nicely.

[@douglasrusselljr7707]

Welcome to the show, Buzzer!

[@tomkelley8313]

Just an idea, pour a cement pad in front of your shop doors. Makes snow clean up easier. Probably 12-16 feet out from the doors will work. No more mud!!

[@613rob]

You paying?

[@Iamyourfather1]

You really think he hasn’t thought about that?! 😂 good idea, but complete waste of money.

[@Ridinglawnmower145]

@@Iamyourfather1it’s definitely not a complete waste of money not only does it make it easier in the winter but in the summer spring and fall they can work on equipment on the pad outside the shop if they already have the shop full I don’t think it’s a waste of money and could be useful it’s just not a priority

[@HamSlicer]

The concrete apron in front of the shop would definitely make it easier to unload the FactorMeals.

[@travpark8163]

I would add if he had the spare cash; make it even a heated pad as well with drainage… then it gets to be a place to wash the machinery and easy to clean up

[@nickgardner5970]

When you put the chrome hub covers on, turn the axle nuts so that you have a flat up and the covers will pop right on

[@MillennialFarmer]

I'm going to try this next time, thanks

[@nickgardner5970]

@@MillennialFarmer maybe just to clarify turn the nuts so a flat is facing the outside edge of he axle, I read my previous comment and it seemed a little confusing.

[@MillennialFarmer]

@@nickgardner5970 it made sense to me because I had actually considered that but didn't think it would really work

[@joespooner3966]

​@@MillennialFarmeryou definitely need to get a tire cart. Takes the backbreaking out of taking semi tires off and on. Call dougo and ask him what type he has. 😊

[@johnbeauparlant9072]

We have a hand cart that has rollers on it to align the wheels that you struggle on and off with.

[@michaelschmidtke1525]

Anna deserves a round of applause!! That was hilarious

[@osiversen]

It was a statement about not coming on the cuise

[@tammygurke7482]

That kitty wants love… you better give him all the lovins❤❤❤❤❤

[@mikewithers299]

Yup! It will run off with Catdog if he doesn't 🤣🤣

[@paulwilson392]

I miss catdog!! I hope he or she is loving life at the neighbours.

[@NorthViewModelShop]

Same

[@364rooster]

What happened to catdog

[@yose6418]

@@364rooster He mentioned a while back that catdog went over to the neighbors place.

[@nitramnitram1966]

Like your dog when you were young “went to live with uncle Bob on his farm in the country “

[@jmacd8817]

​@@nitramnitram1966 Yeah, that's my guess as well. (I'm a cat guy, so a nod and a sniffle)

[@lic2chl]

Zach & Becky, you do a great job bringing this content to your viewers! I don’t miss an episode.

[@jasonklabunde6415]

Just cover the sideboards of the trailer with used motor oil. Keeps water from soaking in and gets rid of used oil. Win win.

[@robbmckay5622]

Was on the same cruise. Beautiful weather other than the crazy winds that Friday sailing. I might have said “There’s the MillenialFarmer” once after I had a cocktail or five one evening.

[@EJHarrop]

Anna knows about being real. Big one , yuk for the team. We miss cat-dog too. Hope all is well. thank you and I hope dad is having a good winter. Cheers.

[@chrishann5714]

Put some half fenders on those it will keep the back of the sleepers cleaner, the young man does great work

[@steverichardson2224]

Zach, you are one crazy dude! But Anna at the beginning, GOLD!!! Enjoy the crap out of your videos. Murfreesboro, TN

[@mikewithers299]

No pun intended right? 🤣🤣💩💩

[@bobobaggins2034]

Hello fellow murfreesboroin😂

[@mwnciboo]

In the UK they have changed the LAW on LED replacement bulbs - basically the reflectors weren't designed for LED and so often drivers in the opposite direction were getting dazzled (even when not on Hi-Beam) so now you have to have replace the whole light unit to deflect LED Lo-Hi to the spec. This is enforced at our annual MOT check - plus causes issues on your insurance. I bet US follows in years to come.

[@jeremygrant1325]

Most us states don't have vehicle inspections

[@larrybennett2160]

Watching you push the snow around reminds me of my kid years and funning around in Mom's garden pretend grading and dumping with Tonka and Ertl vehicles, especially the loaders and dump trucks. Fun for you is you get the real ones to use every day!

[@kylemorse7465]

I love watching polishers work it's just pure art that they do well the Good ones atleast

[@loganpettrey479]

dayuuuum!!!! christian knows his craft! well done sir, that is beautiful!!

[@gazooJG2]

actually pressure treated will rot your trailer faster. when those boards get wet they leach down onto your metal and the chemicals they use to treat the wood is corrosive to the metal.

[@KEVN38]

I did not know that. Thanks!

[@Cobalt135]

@@KEVN38 Most lumber manufacturers that use ACQ, CA, ACZA and CCA treatments specify stainless steel or heavily galvanized fasteners when working with pressure treated wood to hold up to the chemicals and provide a secure connection for the longest time possible. While you can find fasteners labeled suitable for pressure treated wood, utility trailers and the like are usually just powder coated or painted normal steel. But realistically it would take many years to degrade the trailer to be unsafe do to corrosion from the PT lumber. Non PT lumber and a coat of an oil based wood protector sprayed on with a cheap pump sprayer like you use for weeds or a deck every few years would be fine for most people.

[@OrganizedChaos75]

Zach asking Christian, "Wanna go with?" That's one of those regional things. Northerners always finish the sentence with just "with." I have some cousins that were originally from Chicago and always said that. "Can I go with?" Whereas, I'm from farther south in IL and we stick a word on the end of that...with us, with you, with them.

[@beckyumphrey2626]

MN folks have their own language.

[@OrganizedChaos75]

@@beckyumphrey2626 As do many regions across the country. Look into U.S. regional languages and different terms used for the same things across the country. It's pretty interesting.

[@kevinsmith9502]

That cat loves you Zack

[@DavidLasyone-jo4zv]

Trucks need love, and it makes you feel better.

[@caydenwells8074]

Here in Missouri We have our corn already all planted and started on soybeans!

[@jasonneels3760]

Turn the axle nuts one way or the other. It aslo works for covers that are too loose to tighten the hub cap up.

[@rasalas2x]

Trailers love to sit out in the weather. I will often treat the deck and sideboards with used engine oil. Not a permanent finish but it does help keep old man weather out.

[@tomr9509]

Trucks look good. I use Evan's products they very good. He does videos on youtube, a great learning how to.

[@randall8912]

Zach thats why im glad i live in north florida born and raised only snowed once when i was born in 1989

[@williamumbach592]

Amazing transformation of the truck. LED is always a huge improvement

[@glenmurra3856]

Zach double check your bulbs I think you may have put hi beam bulb on the high beam side The connectors are close to being the same I believe those are 9005 and 9006 or h10s and h11s but they have the little tab in them just double check I think you got your bulbs in the wrong spot And if they have the type of deal on the bulbs where you can orient the bulb so it's straight up and down in the housing set that after you lock them in make sure the led is straight up and down

[@ChristineLauer]

I so enjoy new videos!! Love Anna and Didge!!

[@rickylong2768]

Beautiful cat..love the polished rims and tank on the Peter

[@antonertl9952]

we are in Austria had planted all corn.The first had three leaves.

[@ARordnance88]

Hey sit on a creeper seat and use a large pry bar against the floor to put those wheels on. If you wear steel toes you can use your foot saw a pivot point. Much easier and better for your back.

[@dwaynemoore1575]

Are you going to polish the boxes between the sleeper and the back axle?

[@tommikkelson8900]

Great truckers polish ALL the aluminum 😂

[@PhilRable]

Pick a spot, on the fresh white snow, in the middle of the yard when you are filming. Good shot dog😁😃🤣

[@golfbravowhiskey8669]

We're pretty good size farmers here in Texas too, I always look for the farm dogs and the farm cats !!

[@stevenp4821]

When the trailer lumber goes bad now you'll be able to burn it without making arsenic from the burning of treated lumber, that's a plus win...

[@timothyp.5473]

Anna was just showing you what she thought of the late season snow.

[@michaeladams8383]

The trucks look like they are almost brand new ❤❤❤❤❤❤❤

[@4wheelliving132]

the ocd in me could never leave 1 old board with the 3 new ones on the trailer

[@machineryworking4589]

❤❤❤❤

[@sictoday]

21:20 question. Dose the gray ever wash off ol boy. Or is he just all the time like that.

[@jamescassidy6533]

if you turn the nuts so the flats are to the outside the caps go on easier.

[@SamuelManaole]

Great looking shine on the truck. Really enjoy all your videos THX

[@stevejoramo8013]

Instead of using your back to lift tires and wheels when installing or removing, simply take a bar and put under the edge of the tire and lift the bar, which lifts the tire. It goes either behind or in front of the face of the tire, makes it so simple to adjust when removing or installing.

[@rickbottoms7838]

Polishing aluminum is satisfying. But, it’s DIRTY DIRTY work! It’s very slow going too.

[@johnhelbig4115]

Zach, 4 foot pry-bar lifts them tires up and onto the studs with ease... 1 hand around 10-oclock, pry-bar around 5:30/ground, lift and wiggle tire on studs... I'm not going to read through the comments looking for this tip... Good day! Polish guy needs to do the steps/battery box also!

[@tommybecker9028]

Cut a Cattle tag in the shape of the Belt clip and plug it in to the receiver and your days of a nagging alarm will be over

[@kevenhiemie]

I think a few of those hard to start tractors and trucks could greatly benefit from a Super Bank Capacitor/battery combination setup. 25,000 starts without an issue doesn't sound like too much of a problem. You all know all the big companies out there that sell them.

[@wolfpepper]

I can agree. the custom harvest company i worked for kept a couple of them in the maintenance truck that traveled around with the combines and other equipment

[@wolfpepper]

they can be a godsend on a early morning start when its single digits out

[@keithklein-v3l]

Why don't you have the battery cover on the kenworths polished

[@pedrogunner9750]

Zach get some Tigerhide to put on everything that’s been polished. It’ll help protect all of that and makes the polish last longer. I hope the guy who did the polishing makes good money. I’ve polished our semis like this and it’s a long f*cking day. You’re covered in shit and wiped out. I appreciate people like him are willing to get it done

[@blue1991flhs]

Thanks for sharing. That was a pretty amazing transformation on the wheels and tanks!

[@Jacobvernon0927]

Just when you thought winter wasn’t going to come. It says, “I’m here now! Better later than never!!!!” 😂

[@InputEmitter]

When you gotta go, you gotta go. Good girl Anna

[@jenniesmom8225]

I'm in it for the dogs and cats, so I personally love it when they're included! Get Anna in that tractor!!!

[@robertdinicola9225]

I used to polu3sh boat rails . in florida. We didnt wear so much clothes. Showers were not relaxing.

[@zorg2263]

Any reason in particular you didn't get tracks on your Skid?

[@hfff1]

You don't have one of those tire dolly deely bobs?

[@slizardking]

Just from experience. LED headlights don’t burn hot enough to melt the snow off the headlight covers. Just passing on previous problems.

[@damianryan5]

Zach get yourself a wheel dolly for putting them on/off. Best $100 you’ll spend.

[@nealtorbert474]

I'm a long time viewer of both your channels. Thanks Zack and Becky for another great video!!

[@Ham68229]

Zach use Thomson sealer on those boards, will make them last a very very long time.

[@dhansel4835]

AND don't forget the postal rates are going up. I believe stamps are going to be .73cents now.

[@donaldhuisjen5902]

What a genuinely well mannered young man.

[@ProblemChild-xk7ix]

Black paint would look nice on those side boards and slow down the decay rate as well.

[@lundtland]

Do the battery box and stairs too.

[@joeblow3435]

Zach love the show very informative for learning the in's an out's on big farming. Family is real deal Dad and Jim are the best. And You never disappoint working running around and cutting up. Don't change a thing. Makes my day no matter what is or has gone on. Thanks again So much.

[@stephennewton3327]

Now you just need to get the battery box polished to finish the look off and half fenders would help keep the trucks clean

[@boonemathis225]

It's so fun to watch u and larson farms and see you guys get similar weather

[@johnunsicker7440]

You do know they are not that far from each other.

[@kevinsmith9502]

They are the only 2 farm shows I watch every episode

[@ilovechieftains]

Larson lives and farms like 2 hours south west of them

[@tootallplays]

@@ilovechieftainsmore like 20 minutes 😂

[@shawnkelley3695]

+ Welker Farms , 👍😎💯

[@CraigDegolier]

Nice to see them older trucks getting some love❤❤

[@toddhomman2569]

You should get tracks for the skid.

[@AndrewDuff2188]

All these shiny red trucks, Nice red pickup, now you just need to add some red tractors to the fleet !

[@mikedemott1720]

Buy the install tool for the Hubcaps

[@MaverickTG86]

snow in your lap is funny. reminds me of when i dumped a half a yard of dirt in my lap. Didn't tip the bucket forward as i brought it up to about 6 feet off the ground. Bossman just told me to get out of the skidsteer and go do something else.

[@joeymartin8722]

I polish my own stuff, I’m not the best but it looks good from the road. I use Time2Shine and if you hit it a couple times a year it keeps it looking sharp. I even used it on the a/c lines, if it’s aluminum it will make it shine.

[@LuGer212]

it's so funny to see the little "bloopers" like *here we g---- hold on, ahem: "morning."* scenes :D

[@adrianshjadesheehan9991]

Brillant video Zach

[@jasonwoods3384]

that character that plays Zach the millennial farmer is a real hoot by golly

[@stevensulak2387]

how much money do you need to buy a longerair hose

[@MattElrod-mh7zf]

A few weeks ago he disconnected the snowblower bet your regretted doing that

[@pseggons9512]

Truck is looking great. Like the seamless continuity with the trailer side boards. One minute nothing then wow ! sides. AND the buffer still running in the back ground. Magic or good continuity.................. !!

[@longhorn3112]

They make a tool to put the rear center caps on

[@74LAnderson]

Holy moly those wheels look so nice!

[@harrykeel8557]

The truck looks great!

[@ryaneick8864]

Concrete with radiant heat infront of the shop... may sound bojie but check it out

[@Gus1966-c9o]

He does a fantastic job ✨

[@briangraham540]

Good job Zack of taken care of what you own as it show's in the way you and your family farm ! ( from Canada )

[@Leoplayrblx]

Bro it’s still snowing where you live where as it is 87 Fahrenheit or 30 degrees where I live.

[@Glen-tl1pr]

It’s so fun to watch you and Larson farms and see you guys get similar weather.

[@AntiqueIron05]

A trick to pop the hub caps on the trucks is to tighten the axle nuts so the flats on the nuts are all facing towards the outside edge of the axle flange. Then the caps will pop right on.

[@seanharlow6002]

Yeah i'm the one who met you in the bahamas on the cruise

[@DavidRhind-x6i]

hahaha man the best thing to come outta the aftermarket truck parts industry was the two piece wheel cover kit.... TRUX brand buddy look em up i know its all money and the old bowls are what they are. but my friend.... they just fly off or get beat up or whatever. Get some TRUX two piece wheel coverers brother.

[@dwaynemoore1575]

They make a tool to put those chrome caps on your big trucks

[@pedrogunner9750]

If those LED bulbs in the Kenworths aren’t what you want Maxxis makes a great LED replacement lights for those trucks. I run them in mine and in our fire trucks and they’re great. You can also get them in a heated model.

[@SteveNicoson-u1i]

Thanks for another great video Zach. It was interesting and enjoyable. Glad you and the family went on a cruise and were able to relax and get away for a while. Very good. Christian did a great job on polishing your truck. It look just great now especially the tanks and wheels. He did a great job. Hopefully others can use his business. You had a surprise when you got home-snow. The skid loader did alright but might need the bigger blade to move some of that snow. Those meals you were talking about don’t look too bad at all. Look pretty good as a matter of fact. Believe you called then Factor meals. Busy time for you after being gone for a while from the farm. Busy busy right now. All for now. Thanks for everything Zach and Becky. Take care and be safe. The Iowa farm boy. Steve.

[@bertrutledge4546]

Good looking detail job.

[@robbertmadden1386]

Question? Why didn't you have the battery box cleaned up and polished, the rest looks good.

[@phillipdickinson8557]

Zach and Becky great trip I hope zach get back to work quite playing in the snow and work.