DIY KEEZER BUILD With Duotight Fittings, EVABarrier Tubing, and KOMOS Draft! | MoreBeer!

  Рет қаралды 16,832

MoreBeer!

MoreBeer!

Күн бұрын

Пікірлер: 33
@88Nikoli
@88Nikoli 11 ай бұрын
Why did you get a new regulator and manifold ? The double ended duotight connectors go on barbs and you can get ball connectors with duotight fittings moulde in from kegland , could've saved a lol of money there !
@Nefariousrouge
@Nefariousrouge Жыл бұрын
Very nice! A couple of connections there I didn’t know about and wish I had selected when creating my own. I just use a regular 90 elbow with a shorty piece of line in my shank, didn’t know those elbows existed. I’m might have to place another order for more goodies! I will say if you are going the route of Duotight, spend the extra dollar or two for the Duotight QDs. Less connection points for less chances of leak.
@curtpick628
@curtpick628 Жыл бұрын
I will be building a keezer soon. I'll consider these as a method .
@MoreBeer_
@MoreBeer_ Жыл бұрын
🙌🍻
@joestehle3646
@joestehle3646 Жыл бұрын
I think that might have to become my next project if not the next-2-next!!! Love it
@MoreBeer_
@MoreBeer_ Жыл бұрын
Cheers Joe! 🍻
@PolinskeAssociates
@PolinskeAssociates Жыл бұрын
Nice product. That connector looks very easy to use.
@RuckinBrit
@RuckinBrit Жыл бұрын
Like the duo tight kg coupler connectors, they're a nice touch.
@miwinterdays6707
@miwinterdays6707 Жыл бұрын
I think I will be converting my draft system over to this.
@mikewestcott1864
@mikewestcott1864 13 күн бұрын
I have found that the D coupler ball lock adapter causes foamy beer.
@amartini46
@amartini46 Жыл бұрын
I guess for initial build, this system is great. I just clean my lines after I empty the keg, you know, don't be lazy!
@brewing8094
@brewing8094 8 ай бұрын
The EVA 4mm tubing as you can cut down the beer line length.
@keithwheeler341
@keithwheeler341 3 ай бұрын
Did you mention how long your gas and beer lines are? How long do they need to be to pour correctly?
@nathanphillips5156
@nathanphillips5156 Жыл бұрын
Re check valves, you said the shut off valves on the manifold already had check valves. How about putting the check valves at the quick connects to completely prevent beer from backing up into gas lines at all?
@freshplasticup5795
@freshplasticup5795 8 ай бұрын
This.
@JamesW-sn5vu
@JamesW-sn5vu 7 ай бұрын
Do you use ptfe tape between the flared manifold ball valves and the plastic duotight thread to push connectors? hanks
@AM2PMReviews
@AM2PMReviews 10 ай бұрын
okay so to do a gas line from the regulator to ball lock I would need 8mm duotight stuff and a check valve. Im a little confused lol.
@MoreBeer_
@MoreBeer_ Жыл бұрын
Do you have a kegerator or keezer that you built!? We want to hear about it! 🤘😎 List of all products featured in this video 👇 KOMOS DRAFT EQUIPMENT 🍻 KOMOS® Aluminum Gas Manifold - 1/4 in. Flare ➡ www.morebeer.com/products/komos-aluminum-gas-manifold-14-flare.html KOMOS® Premium Dual Gauge CO2 Regulator ➡ www.morebeer.com/products/komos-dual-gauge-co2-regulator.html KOMOS® Stainless Steel D-Style Keg Coupler with Ball Lock Quick Disconnect (QD) Adapters ➡ www.morebeer.com/products/komos-keg-coupler-style-sanke-prv-stainless-ball-lock-adapters.html DUOTIGHT FITTINGS🔒 Duotight Push-In Fitting - 8 mm (5/16 in.) x 1/4 in. Flare ➡ www.morebeer.com/products/duotight-pushin-fitting-8-mm-516-14-flare.html Duotight Push-In Fitting - 8 mm (5/16 in.) x Female Beer Thread ➡ www.morebeer.com/products/duotight-pushin-fitting-8-mm-516-58-fpt.html Duotight Push-In Fitting - 8mm (5/16 in.) x 8mm (5/16 in.) Male Elbow ➡ www.morebeer.com/products/duotight-8mm-516-male-elbow.html Duotight Push-In Fitting - 8 mm (5/16 in.) Check Valve ➡ www.morebeer.com/products/duotight-pushin-fitting-8-mm-516-check-valve.html EVABARRIER TUBING 👏 EVABarrier Double Wall Draft Tubing - 4 mm ID x 8 mm OD ➡ www.morebeer.com/products/eva-barrier-double-wall-tubing-532-4-mm-id-516-8-od-placeholder.html MULTI-FUNCTIONAL 🔥 Tube Cutter - 2-in-1 with Duotight Removal Tool ➡ www.morebeer.com/products/tube-cutter-2-1-duotight-removal-tool.html Beer Line Tidy - Beer and Gas Line Organizer ➡ www.morebeer.com/products/beer-line-tidy-gas-organizer.html
@Stevejohnson-od3mk
@Stevejohnson-od3mk Жыл бұрын
I used the EVA Barrier 8MM hose & every Duotight fitting shown in this video. Instead of the KOMOS manifold on my 4 keg kegerator, I installed the Kegland secondary regulators. Now I can adjust each keg pressure to my liking. I also swapped the analog gauges for the digital gauges on the regulators. Easy to swap out and with the back lighting it is very easy to read.
@thehatmodels
@thehatmodels 4 ай бұрын
Should I use plumbers tape ?
@PatrickBuckles
@PatrickBuckles Жыл бұрын
Great video! I just got my first kegorator. it's used so I want to redo all the hosing, etc. I will be using this vid as a guide and getting all the duotight stuff. I am extremely new at kegging, but everything I've seen on cleaning beer lines talk about backflushing cleaner in place with pumps etc. I'm assuming with how easy these go in and out of the duotights, that I should be able to just take the lines out and clean them without that hassle and just use Beer Line Cleaner and then Starsan in a side bucket? Thanks!
@jasonromanski8538
@jasonromanski8538 9 ай бұрын
I'm wanting to build a keezer. What's the best way to clean your line's, and how much beer is in one of those kegs?
@TexasForever-tw8ko
@TexasForever-tw8ko Жыл бұрын
What length of line and what is your new serving PSI?
@88Nikoli
@88Nikoli 11 ай бұрын
You had screw on jubilee clamps, so there is no need to cut lines. Just unscrew clamp !
@mosesmcrae
@mosesmcrae Жыл бұрын
Do you offer all of this as a kit so one doesn’t need to search for all the parts?
@MoreBeer_
@MoreBeer_ Жыл бұрын
We do not offer this as a kit because it was built to the specs of Patrick’s Keezer, but all the parts are included with links in the video description!
@billalbrets318
@billalbrets318 4 ай бұрын
Used duo tight fittings the I first built my keezer. Worked great until I had to remove them for cleaning. Taking them off is a complete nightmare, despite manufacturer's claims. Will never use them again.
@platinumrespect
@platinumrespect Жыл бұрын
Nice video. But it always shocks me to see Duotight content not covering the major aspects of how they work so you don’t run into a leak. 1. Make sure the Evabarrier tubing is cut at a flush 90 degree angle. 2. Push the tubing ALL THE WAY into the Duotight fitting. It has “two clicks”. Also, a little StarSan helps them push in easier. No need for KegLube here. 3. When connecting threaded Duotight fittings to any threads, hand tighten and then give it a quarter to half turn with a wrench. No more than that or the Duotight could crack. ALSO, no thread tape is required in this installation. I really wish Kegland would address the importance of these aspects with this system in their videos or included with these items. I LOVE mine and have had no problems because I understand how to use them. However, there has to be some documentation on how to use them properly. The amount of people I see online who run into leaking problems and swear them off is astonishing, simple because they’re not using them the right way.
@RAD6150
@RAD6150 11 ай бұрын
Thanks for the heads up... been struggling with getting the gas lines fully seated - seem to need more force than I can easily apply. Will do a little starsan.
@palmtree5544
@palmtree5544 Жыл бұрын
Kind of still looks like the original rats nest of lines. Sorry.
@TheWtikaiser
@TheWtikaiser 6 ай бұрын
His lines are way too long. One of the big selling points is the smaller diameter needs less length. Most of my lines are under 3 feet and work well.
@kimnord2737
@kimnord2737 Жыл бұрын
Very confusing looking.
@crzy619
@crzy619 Жыл бұрын
Sounds like you're making excuses to change it out. Literally the same shit. You hardly change lines.
How to Make CARBONATED WATER at Home in Kegs! | MoreBeer!
4:03
5 Of The Most Dangerous Jobs In The World | Big Business | Business Insider
24:13
路飞做的坏事被拆穿了 #路飞#海贼王
00:41
路飞与唐舞桐
Рет қаралды 26 МЛН
Правильный подход к детям
00:18
Beatrise
Рет қаралды 10 МЛН
Keezer / Kegerator -- Draft Beer Dispenser for the Ages
7:39
Tommy Boy DIY
Рет қаралды 8 М.
How to Build a Keezer or Kegerator for Serving Beer at Home
14:01
NorthernBrewerTV
Рет қаралды 1 МЛН
Keezer Build 🍺 Converting an Old Chest Freezer into a Kegerator
13:03
How to Build a Keezer Draft Beer System
24:42
Homebrew Happy Hour
Рет қаралды 22 М.
Keezer Build
7:30
I Make Beer
Рет қаралды 1,1 М.
How to Build a KEGERATOR or KEEZER for DRAFT Beer at Home | STEP-BY-STEP
16:46
How to bend hard tubing for watercooling!
22:42
JayzTwoCents
Рет қаралды 79 М.
DIY Keezer Upgrades #homebrewing
8:45
Just Home Brew
Рет қаралды 2,1 М.