Mosky pedal power supply

Cool inexpensive power supply fob your pedals. Works great, and CHEAP!!

[@Rjhorning]

Hey, thanks for the review. Your actually the only 1 I've seen that has bothered to break out a volt/ohm meter. I was wondering if you knew how many milli-amps the 12 volt section puts out. It would be great to know what they all put out, but I'm particularly curious about the 12v port. Like, do you think it puts out enough power to run the old Boss pedals that require the 12v ACA adapter? I'm about to buy an old Boss Super Distortion/Feedbacker & I'm wondering if this will power it. Thanks for your time.

[@lilwayne1994]

Outputs 1-7=100 mA max 8=500 mA max 9=100 mA max 10=100 mA max The power supply can handle up to 1000 mA

[@hamzarifaldi8826]

Isolated or regulated ?

[@russellesimonetta3835]

Those mosky,s units are a division of behrenger.

[@thrashedd]

You sound like dave mustaine

[@theeAnteePop]

is it battery run? I'm looking for one that doesn't have to be plugged into the wall

[@refrergrdtdsxt]

look for the joyo power supply 5

[@sabognaako363]

if i use power supply on my pedal effect can it remove the hiss/humm noise?? im using daisy chain

[@nevinmarknarciso]

are the output isolated to each other?

[@Chonism]

how many mA ?

[@jonathanmailloux8899]

Do you know if it coud run a boss rc 300 loop station

[@blaisubirats8553]

Hey, have you tried this with any BOSS 9v pedal? Mine BOSS’ don’t work with this

[@RonCasterOfficial]

Same with me.. it seems that it's having insufficient power..

[@gab6697]

is that isolated ?man?

[@mahoganymarco9199]

Well.. If doesn't power boss pedals just throw it to the chimney

[@RickyLafleurr]

I tested it and it powered my boss ds 2

[@greeneterror7989]

COOL MAN !!! got one of there pedals works great!!

[@ruzcelbeltran]

I hope you can answer my question does that power supply also work with boss pedals?

[@borntwiztid1988]

Yes it should just fine

[@ruzcelbeltran]

@@borntwiztid1988 After 3 years haha

[@borntwiztid1988]

@@ruzcelbeltran well that I don’t know I use a voodoo lab and got it used and still works good after 15 years

[@ruzcelbeltran]

@@borntwiztid1988 wow nice no static noise yet?

[@bluesman5049]

Is this really isolated power supply? Have you checked with the multimeter to get out, not in contact?

[@gabrielchaves7768]

It is not isolated.

[@teacherjonathan3170]

It's not isolated, I have this one and it really makes noise everytime I turning on my distortion pedal.

[@dongfefut8796]

Hi.. Has anyone tried the mosky iso 10? Is it really isolated? Thanks

[@Andrewmest]

Noise?

[@maldpotato497]

Does this power supply eliminate noise from ground loops?

[@TechDeathCowboy]

It does not. It actually adds more.

[@rainbeturns5537]

then where is your review?

[@tommykaira8775]

I got one and it's noisy as he'll, plus current leakage

[@kevmac1230]

Think about it,you get what you pay for,or don't pay for.Do you actually think a 30 dollar unit will measure up to a 200 dollar one? That's what most quality 10 output supplies will cost.

[@dongfefut8796]

Hi, has anyone tried the mosky iso 10? Is it really isolated? Thanks

[@bobayersquebec]

I got it 10 $ on a deal and it work great ! buy it guys max 40 $ on Amaxon MAX