Mossberg 500 Project Part 3: Reshaping the Trigger and Quick Tips | DIY Shotgun Customization

📌 Disclaimer: This video is for Entertainment and Educational Purposes Only. Attempt at your own Risk.
📌 Welcome back, firearm enthusiasts! Join me in Part 3 of the Mossberg 500 Project, where we dive into reshaping the trigger and share quick tips for DIY shotgun customization.
🛠️ In this episode, we'll break down the trigger pack, clean it, modify the trigger shape, and touch up the hammer. I'll provide helpful tips and pointers along the way to assist you if you decide to tackle a similar project.
🎥 Whether you're a seasoned gunsmith or a DIY enthusiast, this episode is packed with valuable insights to enhance your Mossberg 500. Follow along as we continue to transform this shotgun in our ongoing project series.
Tools Used in this video
Gun cleaning mat: amzn.to/2Cj5dO0
Gunsmith Punch set: amzn.to/3yiwTSZ
Rotary Tools
Foredom (Expensive): amzn.to/2R3l7UE
Dremel (Moderate): amzn.to/2UUYt03
WEN (Economic): amzn.to/2R1siN7
Rotary Bits
Sanding Drums (Various Grits): amzn.to/2S7C7GG
Wet or Dry Sandpaper: amzn.to/2Gp7Vpb
Other Tools
Ultrasonic Cleaner:
amzn.to/3LWvMeU
amzn.to/3I5v7FQ
amzn.to/3I5XdRt
Simple Green: amzn.to/2S7ElG2
Microfiber Towels: amzn.to/2GlhzJi
Brownells Oxpho-Blue: amzn.to/46DElo4
Gun Oil: amzn.to/2BoVZOw
0000 Steel Wool: amzn.to/2QCYqHo
👍 If you find this episode helpful or enjoy firearm customization projects, consider subscribing for more content. Don't forget to hit the bell icon to stay informed about upcoming episodes.
🔗 Connect with us:
- Instagram: www.instagram....
Thanks for watching, and let's continue shaping the Mossberg 500 together!
#Mossberg500Part3 #TriggerModification #DIYFirearmMods #GunsmithingTips #ShotgunCustomization #SubscribeNow

[@greyscout01]

Nice. Following your vid on the bolt right now. Trigger's next. I appreciate the details. Thanks.

[@TheHobbyGunsmith]

appreciate the support brother.

[@Rydrdg]

Will the 590a1 aluminum trigger fit the 500 models?

[@green15838]

That trigger pack is a challenge to put back together people, just be careful.

[@TheHobbyGunsmith]

You are correct sir, they are a little tricky at times.

[@jaymeddaugh2044]

Excellent video!! I like that you get straight to the point! Without the bullshit farting around that you see in alot of You Tube video's!! Very informative and I look forward to seeing more!! One question though?? Where did you find that wet stone you were using on the hammer??

[@TheHobbyGunsmith]

Thank you glad you enjoyed it. the stones can be picked up on Brownells.

[@hugh3323]

Any idea of the size of the trigger stop set screw? Appears to be a 4-40 but I can't find one local

[@TheHobbyGunsmith]

i want to say its a 6-32 x 5/16 but your best bet would be to take the trigger guard to hardware store and try it out. next best thing is to order a universal screw kit from brownells find the correct size and cut to length. does not make sense to do so if your only going to use that 1 screw so id go with the first option.

[@SnowDeemy]

What's the update on part 3!?

[@TheHobbyGunsmith]

in the works brother stay tuned, sorry for the delay.

[@BillRodgers2]

FYI simple green mix 50/50 will take blue off I fk d up and left a Springfield xd slide in over night , not good

[@TheHobbyGunsmith]

That i know but your not suppose to leave it in for that long of a period of time. using it as intended will not damage anything.