Most effective Compact and Simple homemade Sandblaster

All fittings and valves from plumbing supply, size 1/2. Sandblaster works very good easy and fast rust removing tool. Tank size and hose length can be varios. When using must wear special protective equipment for use with sandblasting cabinet.
▌Want to see more?! So Don't forget to SUBSCRIBE - LIKE - SHARE ▌
♫ Music - True_Messiah
Thank you for watching
► GetWork ◄

[@salvaje9382]

So far this is the best I seen that actually works effectively

[@Work_G]

It's nice to hear it

[@MajidHosseini-h9u]

بسیار عالی❤

[@Jacob-64]

Is the tank pressurised as well as it being gravity fed to the outlet at the bottom

[@Work_G]

Yes, it is pressurized through the top hole

[@jasonputtock4428]

who ever needs a lawn mower now.?!

[@mjshaheed]

How do we pressurize the tank? Can I use a tyre inflator?

[@Work_G]

You need air compressor, I have review on mine in this channel, you can look it up. It is quite powerful but that is what you want on sandblaster. Otherwise, it will be slow and inefficient

[@mjshaheed]

@@Work_G Thank you ❤️

[@elcanaldealef]

Hola ! A qué presión de trabajo lo puedo llenar para sandblasting? Cuántas PSI soporta ?

[@Work_G]

from 80 to 180 psi

[@lawrencedavis2089]

Interesting 🤔...l would sand ⌛ blast where l could retrieve my sand ⌛ for future use 🤔

[@Work_G]

Yes that is good remark, but then you have to use really good body and face protection because that sand gets everywhere. Of course sandblasting cabinet would be the best option here

[@eltanocapo5696]

Hola amigo. Que compresor usas. De 50 litros podrá funcionar. Aguardo tu respuesta Saludos

[@laurentiu.panait2536]

Minimum 200liters

[@govindsawant6498]

काॅम्प्रेसर कीती एच पी लागेल?

[@rosemariemartin3554]

nice diy😊 how many CFM and psi of a sandblasting air compressor?

[@Work_G]

Compressor work cycle is 70 - 100 psi, 88L, 21cfm. It probably would work whit smaller compressor too. I have a review video of that compressor on my channel.

[@kwokleunghon3821]

Looks great and great idea. Question is where the gas come from?

[@Work_G]

Thanks! Please specify your question I'm not quite sure what do you mean

[@patrickcunningham4603]

Air compressor

[@demplik3455]

how much sand it comsumes per minute?

[@Work_G]

Its a difficult question to answer because I never measured that. Can say since the nozzle is quite large, it uses quite a lot

[@dereksuperstrong1210]

In- complete video

[@dereksuperstrong1210]

You didn't show why you cut the patch on the side why'd you cut the insert

[@Work_G]

It was some kind of a plug in the tank and it seemed to me that there was a weak point, so I just reinforced it

[@cetinkeleskeles7989]

Why is it so hard to tell the

[@julioguerra2023]

Desde San Juan Argentina, que compresor usas y con que presión lo trabajas ?

[@Work_G]

Compressor work cycle is 70 - 100 psi, 88L tank. For more info check my channel I did little review on that compressor

[@eghychannel]

Kran uk 1/2 in

[@gypsymike2355]

This is painful …I’m out

[@outtatime4512]

Too much drama

[@Kakunoshin_Niitsu]

How much psi are you using? What is the capacity of your compresor? Thanks, and cool video!!

[@Work_G]

Compresor work cycle is 70 - 100 psi, 88L, 21cfm. Check my channel I did little review on my compressor

[@mohammedmidlaj4623]

The TEE joint, The ELBOW and the TUBE that measures is 1/2 OR 3/4?

[@Work_G]

I believe that is 1/2

[@laurentiu.panait2536]

I used only 1/2 and works good. You don't need any higher because the compressor is most likely a low cfm one

[@mohammedmidlaj4623]

@@laurentiu.panait2536 My compressor is 250 liters

[@The_OD1]

Bruh this is the same as the one by those Russian dudes. Copied?

[@Work_G]

I even don't looked up before making. Just did it from what I had, bought few things and built how seemed proper. BTW all sandblasters is pretty much the same thing

[@The_OD1]

@@Work_G yeah all good. Your tutorial is a faster version of theres and easier to understand. Look at his nozzle setup, should fix some issues.

[@abin3475]

what compresor spec did you use

[@Work_G]

70 - 100 psi, 88L, 21cfm. Check my channel I did short review on my compressor

[@robertlyle6277]

Used refrigeration tanks are not meant to be reused.

[@Strongman0307]

Ok Mr. OSHA

[@robertlyle6277]

@@Strongman0307No, but I am a vocational instructor, so…..

[@Hammerback0]

Speed limits aren't made to be broken. Tags arent meant to be removed from the mattress. Now watch Robert Lyle go tell mom and dad.

[@robertlyle6277]

@@Hammerback0Everyone knows mattress tags CAN be removed - by the consumer! Funny you should mention speed limits - a motorcyclist died going over 100 mph on a busy street. Bad part was he flew through the vehicle he hit and killed a grandpa and wounded that man’s son. Your comment shows you are incapable of rational thought and likely have a mental illness - I’m correct, aren’t I? Take your meds.