Most Popular Safariland Concealment Belt Loop Adapters for Holsters

[@AntonioSarenas]

Can you attach a qls on the 565BL?

[@cincinnatiking8008]

Are you able to use the 565BL belt loop on the 7378 ALS holster?

[@copquest]

Great question! Yes, those are compatible.

[@douglasspende929]

Great stuff! I use a Velcro nylon shoulder harness off duty! Side ways to.

[@josephcoats3445]

I have the 578, and I really HATE the paddle! I was wondering if the 571 paddle is compatible? Thanks Mr. Holster Guru

[@copquest]

Yes the 571BL paddle will work with your holster. If you're interested in purchasing one, please visit our website (copquest.com) and type part # 23-2446 into the search bar or click the following link: www.copquest.com/safariland-571bl-injection-molded-small-paddle_23-2446.htm

[@gtcam723]

I was just looking at the 7371 7TS for a Glock 48 and am wondering if a UBL could be attached and also if it would be compatible with the 48 MOS

[@copquest]

Hello, I'm not seeing any fits for the Glock 48 on the 7371. I do see a fit for the 48, but not the 48 MOS, on the 7378. Also, yes you can attach a UBL to these holsters if you desire. Here is the link to the 7378 if you want to check it out: www.copquest.com/safariland-7ts-7378-als-concealment-paddle-holster_23-1220.htm

[@mattjware]

Great video, thanks for explaining.

[@copquest]

Appreciate the nice comment!

[@Ronin_Noir]

Question: I do executive protection and I carry concealed . I want to wear a holster that sits a little lower on the waist which is my natural draw. Which adapter to I get to help lower the holster a little lower on the waist?

[@copquest]

Great question! In the drop down menu you'll see a DM option. That will get you a 1" drop off the waist: www.copquest.com/safariland-567bl-belt-loop-adjustable-angle-fit_23-2485.htm

[@andysadventures2765]

Between the gen 2 paddle and the 567bl what do you think holds tighter to body for concealment in suit or over shirt? Thank you!

[@copquest]

Great question! Everything is personal preference and hard to say exactly, but between the two the paddle will probably hold it closer to the body.

[@dkveracity65able]

Funny my expensive safariland holster only had the non adjustable low ride in it.

[@jaime30277]

Thank you for this video.

[@copquest]

You're welcome Jaime. Thank you for watching!

[@krisgarcia1422]

does all these work with the QLS?

[@copquest]

Yes, all Safariland UBLs both duty and concealment will work with QLS.

[@hickfootball22]

Hey man, is the 745BL comparable with the QLS?

[@copquest]

Yes it is. If you're interested in purchasing a 745BL with a QLS 22 receiver plate already attached, check out our website copquest.com (copquest.com/safariland-745bl-clip-on-belt-loop-with-ms22-receiver_23-2690.htm)

[@jamesfulmer7080]

I just purchased a Werkz m7owb holster for my walther pdp. Will the Safariland 565bl work on it?

[@copquest]

Good question! According to the Werkz website, it is compatible with the Safariland 565bl www.copquest.com/safariland-565bl-hi-ride-belt-loop-adapter_23-2480.htm

[@vinprecipuo8043]

The spacer on the 567BL is on the wrong side. It should be on the outside of the belt slide attachment

[@copquest]

Vin, thank you for the comment. The 567BL as shown in our video is how all holsters mounted with a 567BL come from the Safariland factory.

[@vinprecipuo8043]

@@copquest the instructions that came with my 7378 tell you to put the spacer "on the outside of the belt slide." I will change it to the way you have it if that's how it comes from factory. Thanks

[@copquest]

@@vinprecipuo8043 You're welcome.

[@ajfavale8236]

@@vinprecipuo8043in the video is the correct way. The instructions say “make sure to use the support piece on the outside of the slide on the top two T-nuts. Slotted end of support piece to be on the same side of the adjustable 3 hole side of the belt side”. That is the belt side and the outside.

[@vinprecipuo8043]

Is there a spacer on the 565BL? I just bought it and it came with a spacer but the instructions are only for paddle or 567

[@copquest]

Yes the 565BL comes with a T-spacer. The spacer plus longer screws that are included in the packaging allow for the holster to sit further away from the body. Conversely, if someone wants their holster "high-and-tight" to their body, the spacer would not be used.