🔋MOST POWERFUL CLIPPER EVER?!? Tomb45 Performance Motor and Battery Upgrade Kit for Babyliss FX

This new Tomb45 Performance Motor and Battery Upgrade for the FX Clipper is absolutely insane! Watch this video to learn more and also see how it is installed!!!
Grab the Motor and Battery Upgrade kit here 👇🏼tomb45.com/pro...
Tomb45 Academy - tomb45academy....
Click Here for Discount Codes - seancutshair.c...
Tools used - StyleCraft Rebel, Gamma Boosted, Gamma X Ergo, Babyliss Snap FX Clipper, Babyliss Snap FX Trimmer, Stylecraft Saber Trimmer, Babyliss Custom Foil FX02, Gamma UNO Shaver, Andis Slimline Pro, Stylecraft Hitter w/ xpro blade. Klutch enhancement card, Beam Team XL, Tomb45 No drip, Tomb45 Barber Pencil, Tomb45 Power Mat, Tomb45 Powerclips.
Color enhancement cards available at - seancutshair.com
WATCH THIS VIDEO FOR INFO - • SEANCUTSHAIR ENHANCEME...
- - MAKE SURE AND CHECK OUT SOME OF MY OTHER CONTENT! - -
- TOP TUTORIALS -
Help with Guidelines - • Fading Guidelines Expl...
Mid Fade Transformation - • 🔥 EPIC TRANSFORMATION ...
Basic Taper - • Easy Taper Haircut 🔥 S...
Mohawk/Mullet - • Mohawk Mullet Crop Top...
Burst Fade Mohawk - • BEST CUT I'VE EVER DON...
Mid Fade Crop - • BLURRY CROP MID FADE 🔥...
Side Part - • HARD PART HAIRCUT 🔥 Mi...
Textured Mullet - • 🔥 Crazy Mullet Haircut...
- OTHER HELPFUL VIDEOS -
Cleaning the Beam Team XL - • HOW TO Clean The BEAM ...
Zero Gap Babyliss FX Skeleton - • 🔥 HOW TO ZERO GAP Baby...
How to apply color enhancement - • HOW TO APPLY COLOR ENH...
Clipper Maintenance - • BARBER CLIPPER MAINTEN...
How to open a barbershop - • HOW TO OPEN A BARBERSH...
My Barber Station - • Save Money on Barber t...
What you need for Barber School - • BARBER SCHOOL 💈 What t...
10 Tips for cutting Kids - • TOP 10 TIPS FOR KIDS H...
- - MUST SEE PLAYLISTS - -
Fades - • Fades
Tapers - • Tapers
Crops - • Playlist
Reviews and Unboxings - • Reviews and Unboxings
Wish Videos - • Playlist
For all Tomb45 products check out the Official Tomb45 website
www.tomb45.com | Use code SEANCUTSHAIR to save 10%
MOST POWERFUL CLIPPER EVER?!? Tomb45 Performance Motor and Battery Upgrade Kit for Babyliss FX

[@waltercruz9651]

Have a cordless designer i got that a friend was going to throw out. I changed motor , blades (magic clip) , and battery. Its become my go to clipper.

[@Deebohuncho]

If anyone’s curious, this combo is FASTER than the boost fx. Did a couple tests in comparison, this combo goes up to 7590 RPM vs 6800 on the boost fx (stated on the box). Correct me if I’m wrong

[@Seancutshair]

🙌🏻🙌🏻🙌🏻

[@the_original_Versastyles]

The board is the 1st board that was going to be used. Tomb got hooked up 😊. And then they make dope shit so they activated the 3 led system. Now it would be dope if we had plug n play internal QI system and external led color changing tech ❤

[@marcosgranados6964]

This combo better then the boost ? Debulking?

[@the_original_Versastyles]

@@marcosgranados6964 I would assume so. But blade adjustment is just as important if not the most important then just raw power. It's like a race car. You can have 850hp at the crank but the tires are bald and it won't get traction. Grab a fresh DCL blade or have a blade professionally sharpened. OMG my guy Russ did it to my old low pros.. all I am gonna say is holy crap. We are talking Oster 76 or octane level debulking.

[@michaeldiaz7657]

I went to FT worth Barber Supply yesterday and got some of your recommendations. Your boy raff told me about your class. I missed out because of work. I won’t miss the next one!

[@Seancutshair]

That’s what’s up! They’re my people I’ll be back!!!

[@the_original_Versastyles]

One of my new barbers has the original babyliss fx. I have multiple boards but I have noticed I have the board that tomb 45 had but just with out the green cover and the led color switch. But it has ,3 leds on the board. Babyliss definitely changed the board and you guys grabbed those original boards and added that color changing tap in. Dope idea.

[@Seancutshair]

👌🏻👌🏻👌🏻

[@jeromesamuels4527]

I need one like now now

[@zerothebummyhero2137]

Can’t wait for mine to come in and the new metal expansion

[@Seancutshair]

Hell yeah!!!

[@clippercrafters5067]

It’s such a badass upgrade 💯 and I’m rocking that all black joint too

[@Seancutshair]

Yessir 💪🏻💪🏻💪🏻

[@joeskichavez395]

Great product 👍🏾 thanks for the demo, Sean. Told my friend about it and he purchased it. He was having issues with his fx and this brought it back to life. 💯

[@Seancutshair]

Yessir 🙌🏻

[@user-nr1rr8on6u]

I love that I want to upgrade my gold now

[@mflo6890]

Bruhhhh!!!! I was waiting for you to review the upgrade.. I’m about to get two of them jokers!!

[@Seancutshair]

💪🏻💪🏻💪🏻

[@dannifl6329]

Great video man , I bought the boost and had the same issue.

[@Seancutshair]

🙏🏼🙏🏼🙏🏼

[@sandman1133]

Idk man I installed the eco battery on my FX and it's pretty fire with the original motor. It's one of my favorite clippers for blending but I'm worried it might change with more rpms.

[@Seancutshair]

Yeah it’s solid like that. I’m digging this power though but if you like it leave it 👌🏻

[@ramonfades]

The amount of power it gives this clipper is crazy haha

[@Seancutshair]

Yeah they’re nuts!

[@marcosgranados6964]

Does it debulk better then the boost fx?

[@patinoap1_]

That’s what my clipper is doing

[@Seancutshair]

Swap the battery and it will be good to go

[@chunt241]

Also like the power screw driver lol is is good sean

[@Seancutshair]

Yeah it’s nice 👌🏻

[@waltercruz9651]

Sean, should have tried to revive it first before installing new motor and battery. Maybe some soldering fault or loose plug

[@Seancutshair]

No I’ve talked with Babyliss it was just something wrong with the initial run that caused it to shut off when it senses any drag.

[@backwoodsbarber]

Just ordered and used your code here in FL!

[@Seancutshair]

💪🏻💪🏻💪🏻

[@timothyrakowski3676]

Loved it

[@Seancutshair]

💪🏻💪🏻💪🏻

[@tonytastes]

Good thing tomb45 has a fix for all the babyliss clipper issues 😕😅

[@Seancutshair]

😬😬😬

[@mester84]

I just cap the kit 2 days ago can wait to arrive 😬

[@Seancutshair]

💪🏻💪🏻💪🏻

[@1313facial]

Man dope review I saw it on bossio channel real awesome product my gold fx still running but I'ma have 2 get the motor & battery jus incase lol any blessings yall🔥🔥💯💯👊💪👍🙏💈🥊🐐🐐🐐

[@Seancutshair]

It’s tough you’ll love it!

[@andrewmancillas3815]

Bro, can it also be used for the babyliss skeleton?

[@Seancutshair]

No it’s just for the clipper

[@noorsubhi5637]

The best buddy.

[@Seancutshair]

👏🏻👏🏻👏🏻

[@noorsubhi5637]

Cost shipping to mach 🥲🥲🥲

[@cliffordosei9279]

Hi brother Sean am assuming Chris and sons will come out with an upgrade battery for the Babyliss Lo pro fx clippers

[@Seancutshair]

Idk about the lo pro’s

[@juancorrea5389]

How are they running? My black boost just started doing the same thing, turning off randomly then I can turn them back on and sometimes they don’t. Even at full charge

[@Seancutshair]

They’re solid! This upgrade solves that issue for sure

[@BigT1523]

Broski!!! I need a 🎒 hook it up!

[@Seancutshair]

🤷🏻‍♂️🤷🏻‍♂️🤷🏻‍♂️

[@chunt241]

Ordered mine they. Was supposed to be here yesterday but the mail man made up a excuse why it wasn't delivered

[@Seancutshair]

Hopefully soon!

[@josueblanco7595]

Gracias por poner subtitulos en español

[@Seancutshair]

👌🏻👌🏻👌🏻

[@user-wv2pc4pt5o]

Funciona com skeleton fx?

[@the_original_Versastyles]

A special request. Red tomb 45 wireless adapter. Damn.. i have the 1 off. And the real one. I think the los cut it and a few of the influencer editions had a body issue with the metal size

[@Seancutshair]

I dont know what you mean

[@the_original_Versastyles]

@@Seancutshair the first los clipper I had the blade was alot further away (the inner moving blade,) then the gold. When I did a clean out tear down of the gold I noticed one the shaft was squared off instead of a round tip. The enemy of a nylon plastic cam.. and the PCB board had a RGB lights on it and the rest of the boosts don't. The early gold release had these 3 led lights my best guess was going to be different blinking lights as battery wore down. But they just made a simple blink. Also t45 question. The custom service does not understand what a QI pickup is nor a wireless charging receiver so I don't know what to call it but I grabbed a few from ct. One was a babyliss trimmer fx2 I got some gamma ones and an extra wireless aux charger plate. So basically it fell out and when I put it back in it worked. Then like a few days later it is just not taking a charge. The board is fine and also I'm sure you figured it out but you guys have a low pro wireless charger lol. Turn gamma ergo sideways. Boom. Low pro wireless charging. But the og style babyliss blue fx and other ones I have will only do a quick flash and not light up green indication of charging.

[@heavychevy4616]

...still waiting for a skeleton fx trimmer battery upgrade ...so am i supposed to believe that THE MOST POPULAR TRIMMER EVER doesnt constitute being worth tomb45's time to put out a replacement battery for it??? ...im kinda thinkin that would be a big seller...?? always enjoy the vids bro, thanx

[@Seancutshair]

I don’t think it needs one. Those are the best trimmers out hands down don’t know that they need to be improved

[@heavychevy4616]

@@Seancutshair ...true, they are the "benchmark" at the moment... just seems like mine arent holding a charge as long as they used to... & the tomb45 battery upgrades i did in my magics, my seniors, & my fx clippers, sure seems to extend their run time by a noticeable amount, & i was just thinkin it would be nice to be able to do the same thing for my trimmers... thanx man

[@MasterMoore2010]

I think you for your video. But I refused, you never talked about runtime. Did it change? Did it get better? Or did it get worse? I see you posted about the RBM. Did you verify them yet?

[@Seancutshair]

I have a charging mat so they constantly charge in between clients. So was more for the power upgrade which it definitely did!

[@AbuMeeta]

Sean I have a question which power pods do u use for the boost fx? Chris bossio says that the old fx power pods don’t fit on the new one but u have a power pods for the boost fx so please can u give me an answer I am very confused

[@Seancutshair]

I don’t have my boosts in pods they don’t fit. They’re still on my Powermat. We should have boost pods coming soon

[@AbuMeeta]

Hey sorry I mean Power Clip Fit the power clip for the stylecraft on the stylecraft instict? And fit the power clip for the babyliss foil shaver also on babyliss foil UV shaver?

[@kodee81]

Great review where did you find that pencil like power screwdriver

[@Seancutshair]

amzn.to/3bSbd4D

[@kodee81]

Thanks Sean about to order one

[@a1ex978]

yo sean i got a question witch one is better to buy the babyliss booster fx or the rebels 🤔

[@Seancutshair]

Tough. I’d probably have to go rebel but both are solid

[@chickennoodles5222]

Bro im having the same problem with my Lo Pro Fx clippers they keep turning off

[@Seancutshair]

Yeah every now and then they do that. Must just be faulty

[@Faded_By_Des]

What combs is that Sean I been using the 1907 816 and the 817 I believe

[@Seancutshair]

I use a ys park 336 and a Utsumi 299

[@ChillOutDood]

Is it compatible with blackfx? I didn’t see it on their website

[@Seancutshair]

They fit any of the fx clippers besides the snaps

[@ChillOutDood]

@@Seancutshair thank you sir 🫡

[@nathanielrada1009]

The ys parks picks up hair a million times better than any other comb. Get a kid with fine hair and it sticks to the head the ys combs picks it up

[@Seancutshair]

Yeah they’re the best!

[@terrencebrown5447]

Me clippers did the same thing you described. What do I do? How can I get them warranted

[@Seancutshair]

You’d have to reach out to Babyliss

[@Stevendabarber]

Why does it say its not compatible with the boost fx

[@Stevendabarber]

On the website

[@Seancutshair]

Watch my newest video on the upgrade it will explain everything

[@nickroberts5367]

Why does it say on the website that it’s not compatible with the boost?

[@Seancutshair]

The boost is similar. It will fit but we wanted to target the standard fx to get it to that boost level

[@revone6983]

Where can I get those purple comb clips?

[@Seancutshair]

Are you talking about the guards? MartyBlendz.com

[@THEPASSIONATEBREED]

How am I supposed to know once this battery is fully charged?

[@Seancutshair]

It should stop blinking and stay solid

[@samuelsalcedo3582]

And I just bought my clipper like 2 days ago it sounded like it was loosing power but reving if you know what I mean but then the blue light started flashing idk if it was because it needed to be charged again or ? please reply and would it be a good idea to put the tomb motor n battery in my boost fx would it make a difference or is it the same

[@Seancutshair]

Yeah if it’s flashing it’s almost dead. I’d definitely try to charge it back up before I threw in the motor and battery

[@samuelsalcedo3582]

Thanks for replying bro I appreciate so I have a question I bought the chameleon ones right it’s been like 3 days and after like a cut or 2 it started getting a lil loud yk because the clippers were quite when I first turned them on when I received them thru the mail why do you think there loud now ?

[@samuelsalcedo3582]

Not that loud but a little louder than when I first turned them on when I got them

[@1323rodriguez]

Is the taper blade worth it and better than the wedge blade?

[@Seancutshair]

I think so

[@d0n315]

What’s the battery life like? How long does a full charge last?

[@Seancutshair]

No idea since I’m always recharged on the Powermat. Battery life isn’t an issue with any of my stuff. Always charging

[@ramonfades]

Does anyone know why my tomb45 battery keeps blinking on my fax clipper? Doesn’t keep a charge and just stays blinking

[@Seancutshair]

Not sure. Reach out to [e-mail]

[@christopherowens2635]

So the stock motor and battery will go bad eventually? Or did it just so happened to be yours that went bad?

[@Seancutshair]

No I had an early run test production and something was just faulty. I think the new ones now are all good

[@samuelsalcedo3582]

Is it compatible for the babyliss boost fx? I have the chameleon one

[@Seancutshair]

It does fit but it’s not recommended for it because the boost motor is more or less the same

[@michaeldiaz7657]

Is tomb 45 coming out with power clips for the style craft rebel and apex?

[@Seancutshair]

Not that I know of

[@user-wl3id6oi3g]

Why do you have to switch to a taper blade

[@Seancutshair]

Just my preference

[@kidsuperdynamite]

Why do you choose the taper blade over the fade blade? I’m thinking of getting the taper blade for my clippers but I’ve never had a taper blade before, and I’m new to the barber game

[@Reborn95]

Taper blade leaves a more smoother and buttery blend than the fade blade IMO

[@kidsuperdynamite]

@@Reborn95 thanks! One more question, is it better to zero gap them or not?

[@Reborn95]

@@kidsuperdynamite If you want to do bald fades it’s always best to zero gap them, but taper blades are kinda limited, while they do leave a smoother blend I also noticed it’s harder to remove a trimmer line if your trimmer is zero gapped compared to using a fade blade where it removes the trimmer line easier than the taper blade, as long as your trimmers aren’t zero gapped to the max then you can remove the bald line with the taper blade with ease 👍

[@kidsuperdynamite]

@@Reborn95 thanks appreciate all the info!!

[@Seancutshair]

Fade blade isn’t very forgiving and a lot of the times will snag as well. Taper blade just a little easier going

[@Kpena92]

Do you know when this combo is going to be available for purchase my man?

[@Seancutshair]

All I know is we have the order in and they’ll be back in stock in the future not sure of a timeline

[@Kpena92]

@@Seancutshair they are back in stock i just ordered mines now! Thanks my man!

[@kevinmendez2922]

Why does it say not compatible with boost fx clipper on the website ?

[@Seancutshair]

It’s comparable so not necessary in the boost. It does fit but isn’t intended for that but the other fx (non boost)

[@chunt241]

@sean is the boost+ original battery an motor more powerful than the tomb45 battery an motor upgrade or is it the other way around

[@Seancutshair]

Idk the exact details but they’re probably similar. A boost+ wouldn’t need our upgrade. This one just had it because the original motor and battery had an issue.

[@ilovethots4946]

Will the motor and battery upgrade fit my los cut it boost fx? On the website it says it’s not compatible.. so I’m not too sure

[@Seancutshair]

It will fit. It’s pretty similar to the boost so we said it’s not compatible. More so not intended for the boost since that motor is already better. I have it in mine though

[@abrahamgarcia6086]

How many rpm's do you get our of that motor and hour of work do you get out of that battery?

[@Seancutshair]

I don’t know exactly. I think around 7000 rpm

[@Kpena92]

I just purchased boost clipper, but the tomb 45 website says that the combo is not compatible with the boost clipper. But the video shows otherwise. So can I still upgrade my boost or keep it original?

[@Seancutshair]

Watch my newer video on the upgrade and you’ll understand

[@Kpena92]

@@Seancutshair dang my bad man, I didn't see you had made an updated video 😅 much appreciated and makes a lot more sense now! 🔥

[@choppinwithchris]

Would this motor/battery set up work on the LoPro FX?

[@Seancutshair]

It will not

[@danieldicken6407]

Sucks for babyliss but good for tomb 45 to fix the issue. Babyliss dropped the ball on them first runs.

[@Seancutshair]

They were early early runs. I think the fixed it for most of the production run

[@the_original_Versastyles]

I have mine still. Another way to know if you have the OG motor is the shaft is flat at the too ND not round.

[@angelmendez9990]

Where did you get your color coded guards ?

[@Seancutshair]

www.amazon.com/dp/B09NLW46T4/ref=cm_sw_r_as_gl_api_gl_i_V0TYK6SFZ1CWWXPHV5RB?_encoding=UTF8&psc=1&linkCode=ml2&tag=seancutshair-20

[@kampfer1299]

Can this motor fit into the lopro 👀👀

[@Seancutshair]

Actually just tried it and no it won’t

[@petervang4339]

You guys are sold out!!!! I’m hurt. Lol

[@Seancutshair]

Really?! I didn’t know that

[@vaughnz7989]

Hey man ,,,can i use the tomb 45 for wahl designer ?

[@Seancutshair]

Yes it should fit

[@jzx3912]

Can u put this in a regular fx?

[@Seancutshair]

Yes 👍🏻

[@rommellacson3159]

Hey man, I had the same babyliss black and gold boost fx clipper, and you replaced the battery and motor. When I click the link to order, it says not compatible for boost fx and sadly out of stock. I'm having issues with my clipper boost fx. I just bought it last year, when I'm using it. It will stop, and the battery sounds low eventhou I charged it before using.

[@Seancutshair]

It says not compatible because the boost motor is already similar to our kit. It WILL fit but not as necessary. More meant to upgrade the regular fx

[@rommellacson3159]

@@Seancutshair thanks Man!

[@hassenv7803]

so tye og fxs are better w this mod then w the boosts?

[@Seancutshair]

Just not as necessary with the boosts. Will give you the same end result on either. But the boosts are already “boosted”

[@basesvr1400]

Is this battery upgrade compatible with the lo pro fx?

[@Seancutshair]

No just the fx

[@BigT1523]

Will that battery work with the lopro fx???

[@Seancutshair]

Not made for it no. Not sure if it could be done 🤷🏻‍♂️

[@josedmartinez7013]

Do they have that same kit for the fx boost ?

[@Seancutshair]

It fits the boost the boost just doesn’t necessarily need it.

[@josedmartinez7013]

@@Seancutshair alright man thanks appreciate the help

[@spidey93]

What brand are those combs?

[@Seancutshair]

Ys park

[@spidey93]

@@Seancutshair thank you !

[@DoppelH]

Bro is the babyliss battery and motor from tomb45 stronger than the original one that is in the boosted ? And the second question: do you deliver to germany ? ✊🏼👊🏼

[@Seancutshair]

It’s supposed to be similar but in my boost+ it’s absolutely beast. I’m not sure about shipping to Germany you’ll have to check the site 👌🏻

[@DoppelH]

@@Seancutshair thank you brother for always answering me! 🙏🏼

[@BENZODABEAST]

Does this work on black fx

[@Seancutshair]

Yes!

[@pazfadez]

I’m installing it rn but the switch doesn’t turn on when I put the cover back on what am I doing wrong when I flip the switch on the battery with my finger it turns on

[@Seancutshair]

Has to sit just right. Took me a few tries

[@guidoc5772]

Will this fit in a lo pro clipper at all? Is it more powerful than the LoPro?

[@Seancutshair]

It’s not designed for the lo pro and I’m not sure

[@desmondmitchell5602]

It's a lopro motor they the same

[@guidoc5772]

@@desmondmitchell5602 got it. I saw Chris Basio measuring the RPM for the replacement motor + battery at 6100 and the boosted were at 6800. I feel like stock boosted/lo pro is still more powerful than this replacement from what I have seen.

[@fadechannel1096]

Where is your shop located?

[@Seancutshair]

Kentucky

[@lwilliamson829]

hey, any UK stockists or vendors I could buy this from bro?

[@rickycataldo2465]

battery chris and sons

[@Seancutshair]

I would think Chris and sons will end up with all this.

[@marcosgranados6964]

Ey ppl i need some help :/ My babylissgold clipper wont turn on and the LED light blinks Anyone knows whats wrong

[@Seancutshair]

Plug it in and try to “jump start” it

[@marcosgranados6964]

Yup i tried that but still didnt work:/ But thank you sean!

[@FadeWayMobile]

Sold out 😢

[@Seancutshair]

I know it they went crazy!

[@Guillito306]

Like the viedo just ordered the black fx cant seem to find a dock charger. Where did get your?

[@Seancutshair]

Babyliss sells them or you can build one on the custom fx app

[@duvinci_duh]

So which tomb battery attachment would I buy for the Babyliss pro influencer boost+ I really want that extra battery and mat. I don’t want to get the wrong one since I’m overseas right now and can’t return anything if I get it wrong

[@Seancutshair]

I don’t know if you need a battery or a powerclip. Not sure what you mean exactly. This battery is for the fx, the fx powerclip fits the influencer clipper as well.

[@markied2873]

I appreciate y'all doing your thing to give a better product but it's a shame that all this needs to be done in the first place, paying all that money for a clipper to die so quickly

[@Seancutshair]

Yeah mine was just an early release that’s why it had problems. Should be fixed now. But these are definitely a huge improvement for a working regular fx clipper

[@the_original_Versastyles]

Most of em don't remember how the fx was not even rotary 1st. Forflex =fx. Homage

[@thechickylala]

💜💜💈😁

[@Seancutshair]

🙏🏼🙏🏼🙏🏼

[@supermanlol67]

So you pay an expensive price for an influencer hyped peice of junk that ends up not working, and then you have to buy a new motor and battery.. I'll stick to what has been working for years with the osters and wahls professional line of clippers.

[@Seancutshair]

😂😂😂

[@laloscutit]

So if you have a boost would putting the tomb45 battery in it but not the motor be worth it ? Or is it pretty much also the same ?

[@Seancutshair]

I’m not sure I never thought about that, I know the motor is similar but potentially could get more battery life