Mothers Back To Black Vs Meguiars Ultimate Black Aerosol Vs Meguiars Ultimate Black

If you feel I helped at all and want to donate a few bucks:
www.paypal.me/MarcMiano

[@dashriprock01]

Sometimes silence isn't golden.

[@brandoncaldwell95]

I just removed all that black plastic crap and had it either painted or replaced. Those ranchhand bumpers look great on the front of the cateye silverado. Also great protection. Need a touchup? Black spray paint. Problem solvd.

[@stormyalice]

Good to know. Also good to know I don't have to replace. Just apply a fuck ton of Mothers.

[@Justinwhat1]

Digging the fast forward music.

[@RiffMusic1970]

Justin Beyer Haha

[@crazyfisherman100]

Sorry to say but on every oil change I just put a little new oil on microfiber and give it a rub down. Doesn't need it every time but it works for me and it's cheap. Once I'm done vacuuming inside and maybe steam cleaning I just wipe down the surfaces with blue shop towels and have no residue on the hands after that

[@badandylaoc]

😂😂😂

[@shayneharris9922]

Bought a new/used car that had been touched up with that trim and plastic restorer. Looked great for more than a month, then started running onto my paint when it rained. Extremely hard to remove. Haven't found anything that works 100% at removing yet, that is safe for the paint. BEWARE when using this stuff.

[@andin8615]

Which brand that caused this???

[@RiffMusic1970]

Durability video to come in a few weeks.

[@CRM537]

search for Bondo 3M black restorer... its a permanent gel

[@Count_Grishnackh]

Riff Question, can these type of products (Such as "GTechniq C4") be applied to the rubber trim moldings along the doors? Thanks for the videos, appreciate it!

[@RiffMusic1970]

xzach23 x From what I've read, it works on rubber too but all excess should be buffed off to avoid C4 from cracking over time. And thanks!

[@AmbientShades]

I used mothers back to black on my trucks fender flares last year - took damned near the whole bottle, and it faded after about a month. So need somethin better. Seriously considering painting them black and be done with it.

[@RiffMusic1970]

AmbientShade Others to try that last longer are GTechniq C4, Wolfgang Exterior Trim Sealant and CQuartz Dlux. I tried Dlux but it left streaks. It wouldn't even out. I think I used too much. All of these trim restorers have to be applied THIN.

[@AmbientShades]

I'm gonna try this spray on rubber see how it works. kinda like plasti-dip. If I don't like it I can peel it off.

[@tonyvega7268]

I have try all those brand they sucks. I now I been using the chemical guys it work better

[@deangelowatkins2831]

Use a heat gun

[@tomkentington8477]

IMO, Forever Black is a superior product compared to these -- From my experience, both Mothers' and Meguiars' results last a few weeks -- Forever Black lasts a few YEARS! Also,, I've heard you're best off applying these types of products to a cool surface, out of direct sunlight; might also assist with the wind!

[@RiffMusic1970]

Thomas Ko Thanks. I'll try to make a comparison video with that too. I already have PERL and ULtima Trim and Tire Guard to make videos with. Who makes Forever Black?

[@stevietattoo1]

Thomas Ko thanks for the review of forever Black Iam gonna try it on my jeeps fenders 👍 Amazon has it for 15 bucks and change Iam gonna give it a shot .

[@JedTaneo]

Green Day

[@pauloaraya5104]

Debes hacer la prueba mostrando el resultado después de una semana de tiempo ya estos productos con el sol y el agua de lavan y con estoy se comprueba su durabilidad.

[@RiffMusic1970]

paulo Araya Sorry, I only speak English.

[@emanuelsantiago16]

Yo uso el back to black para los plasticos de una Mini Cooper y la primera y segunda ves que le unte no duro mucho tiempo pero luego ya me a durado mucho por varias semanas

[@Mk5forLife]

*Porquerias d productos solo para robarte el dinero. *Crappy products,only good to steal your money.

[@gr-2749]

@@emanuelsantiago16 oye Bro ese producto dónde lo venden en Monterrey..?

[@mrs.kittylarou4970]

Do they have one for gray colored plastic bumpers?

[@RiffMusic1970]

Mrs. Kitty Larou Any one of these would work on gray plastic. They are not tinted at all.

[@mrs.kittylarou4970]

@@RiffMusic1970 Thank you

[@christopherbell7159]

can this work on satin black powder coat

[@RiffMusic1970]

christopher bell I'm not sure. I've never tried that. It has a shine to it so it would probably make it shine more.

[@ezrapardede1921]

How's this product feel to the touch?

[@RiffMusic1970]

skreet mycty They’re both like lotions. Smell pretty good too.

[@mred419]

So what was the outcome you didn't never say anything

[@RiffMusic1970]

Ed Hill I try to let the videos speak for themselves but according to my test and in my opinion, the Mothers and Meguiars are exactly the same for looks and durability with the Meguiars Aerosol having the same look and much longer durability but must be taped off or it will get everywhere.

[@RiffMusic1970]

Ed Hill Also, check the comments for an update video.

[@butterbean4195]

I always thought anything with black in it will work better than this stuff.

[@RiffMusic1970]

Butter Bean Ok. I’ll test that next. I have Tuf Shine Black Restore.

[@dunno1128]

I almost got convinced and was about to buy that shit on amazon... till my brain started to work again... I guess at the next rain, this product coat will be gone.

[@RiffMusic1970]

Dunno which product?

[@SWRadioConcepts]

Cheap mineral oil would work as good as any of these. Looking for something that actually has black pigment.

[@RiffMusic1970]

remingtonh Solution Finish is a black tint trim dressing. Video coming soon.

[@robertr.beauchamp453]

Why would I want to go to all the trouble of masking so I can use an aerosol when I can just rub on the other two?

[@RiffMusic1970]

Robert R. Beauchamp The only advantage I can see is the Aerosol has much better durability. Like, 8 months vs 4 weeks difference. If taping up is worth it is up to you. kzbin.info/www/bejne/aomuYqigituHbKs

[@shaynes21]

That Meguiars aresol is absolutely garbage and i would kill for my plastics to look as good as those before he put anything on it!

[@joerobertson7047]

The mother's back to black is crap. 2 days after application, the trim is back to its gray and sundamaged look.

[@RiffMusic1970]

Joe Robertson It lasts about 3 weeks in my tests.

[@PeenMcTuggins]

sweet racing stripes (;

[@RiffMusic1970]

ryan schwab 😀

[@RiffMusic1970]

Taking one for the team!

[@foomeng3ify]

hi so does mother back to black is the 2nd best?

[@RiffMusic1970]

Wei Ming I found the Mothers Back to Black and Meguiars Ultimate Black to be equal in application, looks and durability. The Meguiars Ultimate Black aerosol had the best durability.

[@foomeng3ify]

Riff thx for ur reply. But the aerosol indeed is a pain to mask out the paint area

[@walkabout4life1]

Coconut Oil

[@AngelMoreno-ok5bv]

So this is not a permanent fix?

[@RiffMusic1970]

Angel Moreno I don’t know of any product that’s permanent.

[@AngelMoreno-ok5bv]

Riff Oh okay, so the Mother’s Back to black and Meguiars is just a temporary fix/look?

[@AngelMoreno-ok5bv]

Riff I didn’t know that tbh, I thought it was

[@RiffMusic1970]

Angel Moreno Yep. It’s temporary. The Aerosol will get you close to a year though. The others are good for 3-4 weeks.

[@sonyyaaj]

Anything wipe on is not gonna stay, after a few car wash or rainy day it fades again, better to just get it sprayed

[@Remaagen]

You want it black. Use a heat gun.

[@Thekidsinafrica14]

Don’t use a heat gun smh.

[@VurdaiCleaningServices]

No heat gun turned my trim green f#*k that ! Never again

[@TimeRelease_1]

The aerosol is shit guys dont get it. You might as well use a clear coat

[@TimeRelease_1]

I had the same problem with the second coat

[@RiffMusic1970]

cr1m1nalspeed What problem did you have?

[@dinodon1]

Fades,Flakes away,and the rest will not come off easily. Stuff is junk

[@RiffMusic1970]

D Eret I never had a flaking problem. It lasted about 6 weeks before needing to be reapplied. I can see it being a pita to remove. I would just let it fade. The only other problem with it is having to tape off everything. I don't know if it's worth it.

[@JedTaneo]

Just paint it.

[@dtna]

Back to Black doesn't last very long.

[@RiffMusic1970]

Only the aerosol lasts more than about 4 weeks.

[@RiffMusic1970]

Update video: kzbin.info/www/bejne/aomuYqigituHbKs

[@mygmailaccount5393]

The McGuiar's aerosol turns white and chaulky after a while. I wish I had never used it. Horrible!

[@RiffMusic1970]

Never turned white for me. It’s been a year and a half now.

[@rethinkcps2116]

Prep looks like a hassle & timesuck. Prefer lotion, cloth, then a quick buff. You must have been tired doing it this way!

[@RiffMusic1970]

@@rethinkcps2116 Yes. The aerosol prep takes a while but it lasts over 6 months. The lotion is just wipe on but only lasts 3 or 4 weeks.

[@rethinkcps2116]

@@RiffMusic1970 - oh, I see. Good points. Thanks for your informative answer & channel. Cheers -

[@frankfitzpatrick5300]

Try kerosene People have been using it for decades .