Restore Your Trim PERMANENTLY in Just SECONDS

Restoring your car or trucks trim can be intimating with all the different trim or plastic restoration products like back to black, vinyl magic, and so many others. After a wile trim can get faded and make your car look old. What I have for you guys today is the Trim Restoration Cubes by lithiumautocare.com. These trim cubes are amazing and restore your black trim in literally seconds with their special formula. Restoring the trim on your jeep, car, or truck is no longer a huge project. let me show you the best way to restore your vehicle's black plastic trim!
Lithiumautocare.com
Promo Code - buddysdiy20 for 20% OFF!
LINK-
lithiumautocare.com/collectio...
I Also Sell Jewelry! Follow My Facebook Page! (BEST Prices on Gold)
-------------------------------
/ buddysdiyjewelry
Follow My Instagram!
-----------------------------
/ buddysdiyofficial
FREE TOOL GIVEAWAYS COMING SOON!

[@BuddysDIY]

Link to Product! lithiumautocare.com/collections/exterior/products/graphene-trim-coating 20% OFF With Promocode- buddysdiy20

[@JairusTakay]

Hey man do you know how I can glue trims back what products would you recommend

[@MrMurraypants]

promocode no longer works. Are you not sponsored anymore?

[@harry554]

@@MrMurraypantsguess not..

[@user-sl2dt4gz8e]

How long did it last?

[@BigBrotherIsTooBig]

For the skeptics. This is indeed not permanent, it is a coating. However it is a long lasting coating. Depending on the quality, up to a year and a half. Good ceramic coatings last longer up to five years for the best ones. The only way to restore the plastic is a heat gun. The plastic gets discolored because the oils found in this petroleum based product get washed away from years of exposure. Heat brings this oil back to the surface restoring color. After restoration, I apply Diamond Pro Tech 36 month coating. They also have a 5 year and 10 year coating.

[@harry554]

So what you just use a heat gun to melt your trim off? Just kidding but this option seems like wayyy less effort for way cheaper than the products you suggested. Remember this is for flipping cars not restoring our personal vehicle.

[@BigBrotherIsTooBig]

@@harry554 Yes, that is exactly what I wrote. Melt your plastic off 😑. I'd wager you took the short bus to school.

[@vwbug1975]

I followed the instructions for the heat gun method on my 2004 Volvo V70, and the trim looked fantastic for about 3 months. By a year later, it looked just as faded as if I had never used the heat gun. I ended up using gloss black vinyl wrap on the trim, and two years later, it still looks like new.

[@timmillwood1585]

Repeated use of the heat gun will cause the plastics to become brittle and crack since your drawing the oils out of the plastics to the surface and they get backed off over time. Best solution is to just paint your plastic trim. Speaking from someone who own a 03 Avalanche with body cladding I know from experience 😂 lots of trim to restore every 3-6 months

[@BigBrotherIsTooBig]

@@timmillwood1585 Yes, I agree. But the point is restore it once, then keep it protected with something that blocks UV.

[@austingilmore9972]

i came across your channel last night, and really enjoy the content. I sold my first car yesterday, and where i live it is very hard to find my next buy. your content helps alot. Thank You :)

[@moodberry]

I like how you got straight to the point. Well done.

[@ktl4539]

Shoe polish for the win. Puts the oils and pigments back ino the plastic...👍

[@dalepinney5001]

as there seem to be a few sceptical about this product how about doing another video in a few weeks to see how well it's lasted and performed after washing the car also

[@bryantrichardson6612]

Why not just do again after washing the car, it's part of detailing the vehicle...

[@davidszymanowski4777]

@@bryantrichardson6612 or just use a heat gun, it does the same thing.

[@Jepson07]

Spray paint black, better than that

[@Devast8r34]

​@@bryantrichardson6612restoring trim is not part of a detail thats restoration 😂

[@corail53]

@@Devast8r34 Putting a coating on trim would fall under detailing.

[@Kim-ek7xy]

This is just what I need to restore the trim on my 02 BMW 325xi. I thought it would have to go to a body shop. Happy I can do it myself. It looks amazing. Thanks for sharing!

[@redhopper5031]

Your videos are fantastic. Very helpful, and professionally done. You should be very proud. Keep up the great work. Thank You

[@j.caraballo1748]

I appreciate all the “know how” you include in your videos! Keep ‘em comin!

[@drophammer776]

I restored all the trim using a propane torch. One direction NEVER pausing and NOT back and forth direction. Keep tip just close enough so flame barely touches. Trim hot, but cool enough to be able to touch with finger tips. I tried a heat gun but a natural flame brought out a deeper black. Turtle Wax after and again when vehicle needs waxing. Five years later, still looking new. I was so impressed with the results I tried it on those plastic green patio chairs followed with a coat of Turtle Wax. Same results. 👍 Remember, One direction with flame. Never back-forth as you could warp or possibly burn.

[@joeymcguire8742]

This can be a decent solution for cosmetic pieces, but I wouldn’t want to rely on it for physical properties. The heat does change the chemical composition and properties of plastic. Heat is a “temporary” solution that will likely revert back to the condition prior to heating in a couple years with the added feature of making the plastic more brittle and subject to physical damage.

[@progoldsmith]

Purchased and worked nicely for about 3 months. Today(5 months after purchase ) my trim looks just as bad as before I used the product. I still have a couple cubes left, so ,at best lasts 6 months…tops.

[@EazyDuz18]

you fell for the advertisement disguised as a video lol

[@radwanalrahmo5662]

I was waiting for you to upload and thank god you did. Keep up the good work 💪

[@justinheavner4573]

Good video man keep it up im learning a lot definitely would like to see more car flipping videos. 👍 You do a great job with explaining everything. Keep it up.

[@mereese1]

Short and sweet, not a lot of extraneous talking, great! keep 'em coming 👍🏼

[@TigerBoltzDaily]

ive watched all ur car flipping videos 4 times bout to watch em again i love em u gotta upload more bro

[@lucasurso3066]

Thanks for not wasting time, great job

[@ralphpearson5420]

Thank you, Buddy, very usable information.

[@NasserFayezvlogs]

WE NEED MORE FLIPPING CARS VIDEOS PLEASE! I started doing car flipping because of you, thank you for the motivation always been my dream and to be honest you are the best at it with all these details in your videos about how to do it. I’ve been checking your channel everyday to see if you uploaded something new. I also bought the ThinkCar/ThinkTool Mini scanner after watching your videos so if you can do another video showing how to use it in depth because it’s kinda complicated. I really hope you see this comment🙏🏼

[@BuddysDIY]

I see you homie 👀 Flip videos take a wile but rest assured there will be many more to come!

[@glynismoore883]

I tried for myself on my 2005 Ford Explorer Sport Trac and it looks amazing!

[@saboryz]

Great format for the videos, enjoyed and found it helpful. Subscribed!

[@KastaRules]

Buddy, you are a GODSEND!

[@normm.7265]

New subscriber, and appreciate your video style. No fluff, just stuff -- stuff we need to know. TIP: When using wet/dry sandpaper from a full sheet, tear the sheet in half, horizontally. Fold the half-sheet in thirds. This optimizes each of the three folded panels for full use and provides thickness for padding as you sand. (Having worked in an auto body shop for years and wet-sanded more cars than I want to think about, I can vouch that this tip will save a little time but a lot of sandpaper.

[@x-man5056]

Use vinyl dipped, cotton cloves, to avoid removing your finger prints from your fingers.

[@ThriftyDivasCloset]

Thanks for this video. You really helped me with restoring the trim on my 2004 Jeep Liberty. Going to order this now. 👏🏽👏🏽👏🏽👏🏽👏🏽 this stuff worked great on your trim. SOLD!!!!

[@Jepson07]

Spray paint black, better than that

[@mmm-eo1gq]

I love your videos I'm from the middle east 🇧🇭

[@stevegarcia1796]

Thanks Bud excellent video 👀👌

[@bigrod997]

Just ordered the kit with the promo. Thanks

[@alastorclark3492]

Ahh Yes this is the first ive seen of this trim restoration. Thanks mate

[@mastersautodetailing3659]

Thanks for the advice I subscribed to your channel I’m a full time Detailer. Now I have a new product to try

[@BuddysDIY]

Their hypercleanse is some serious carpet cleaner man. Try that stuff out too!

[@jenifershepard2377]

good video. gonna try this on my Jeep

[@bloodmooncomix457]

Well done review! Clear and to the point......(Not to mention, excellent narration)🤔 Lithium should have cut you a check for this promo plug! 👊😄

[@kushagradeshpande5740]

PLZ upload more!!!

[@buddymcclure6170]

Nice work Buddy!

[@danmeyers8881]

Wow this just made my life much easier

[@tylerterrell8907]

Wonder if this car is a part of his car flipping series🤔.. we need more of those Buddy.

[@alastorclark3492]

I believe the next flip video will involve a truck

[@BuddysDIY]

@@alastorclark3492 youre right lol gmc sierra

[@alastorclark3492]

@@BuddysDIY Quite right. I remembered, but i didnt know if you wanted others to know yet :3

[@thedarkknight1971]

Some people/pros use a heat gun, some people use those 'Trim Black' sprays or waxes etc... Me? Shoe Polish.. Yup, regular 'Cherry' wax black shoe/boot polish. Even the black liquid 'Shoe Shine' bottles with the little sponge glued to the top work JUST AS WELL (easier to apply too as you can use it as a small 1" brush. But... Vitally.... IT LASTS! Done it to many cars I've owned and I've not needed to do another touch up another car whilst I've owned it... 😎🇬🇧

[@thegreencat9947]

I like that.👍

[@rogerhalljr.4704]

It pretty much works!

[@saprissa9]

Broooo i love your videos. I got the same car and im trying to restore it.

[@luismarquez3876]

We're waiting for the Part 4 of the car inspection series!

[@erniearambula3525]

Amazing 🤩

[@kdog773]

looks awesome

[@johnsteed265]

I simply wash trim, wait until dry then rub on some mineral oil. It doesn't last for 250 washes, but I doubt that expensive product lasts that long either. Also, mineral oil is super cheap!

[@dtail4u]

I just found your channel. Very well done video. I subscribed. Thanks

[@MRfoxracing32]

Purchased. Thanks for the info.

[@BuddysDIY]

Excellent!! You'll love it!

[@1964rmcc]

Looks very good 👍🏾

[@alexill]

Your content is awesome bro !

[@seasonedtoker]

Liquid pigments and acrylic binder that is uv resistant is the best and cheapest option. It is essentially what you are using, but not in an expensive bottle

[@ThePackman627]

would you recommend a certain product? I'm not familiar with pigments and binders

[@americanmambi]

Thanks man!!

[@austinjew3094]

Ok I ordered some. I guess I’ll find out if this stuff is hyped or not!

[@amyk9813]

Is it?

[@LaSouthernGemini]

So how did it work out?

[@blairgarner1264]

I'm sold. Using your link, and your discount code. Thanks, Buddy! I'll let you know how it does.

[@BuddysDIY]

Let me know boss. I was actually surprised how quick it was. Almost seemed too easy lol

[@austinjew3094]

How was it? Just ordered too

[@Burn_pancakes]

So how is it after a year?

[@VadelGame]

Thanks for this video bro. I got do that to my family's car haha

[@BuddysDIY]

Use the promo code!!

[@870.Shaker]

i was gone buy a whole new bumper thank you so much

[@alanmoore78]

I've been a believer in Stoner Trim Shine for awhile with this sort of gray plastic trim that turns all chalky. But it'll last awhile and go right back the way it was. I have this sort of gray plastic stuff on the rockers and bumper covers and rear step of my minivan so might have to try it out...if I ever see it again...sad that the transmission shop I took it to lost all their employees and the one guy has been trying to do everything himself. He just hired two more guys so maybe this will be the month I get it back. So Florida, eh? How many cars can you sell in a year before the state gets mad at you and demands you obtain a license? It's like 4 cars here in Oklahoma.

[@bamaboy6207]

the turtle wax grapheme trim restorer is only $12 and looks and last way better!! wipe new trim restore was even better in my use

[@ngarmy6602]

Love videos ❤️💪💪

[@lassei4659]

Just mix 2-1 boiled linseed oil (2) with white spirits (1). Apply a thin layer and wipe off with a microfiber cloth. a fraction of the cost and 10x product for future applications.

[@CBZED101]

I use to do it this way too, it works and it’s cheap af but has to be redone every 6 months or so.

[@sed6]

Is white spirits the same as Coleman lantern fuel?

[@silaskovalik2439]

I'm gonna use this on my 2002 subaru impreza 2.5 wagon

[@allblackeverything9975]

How long does this product last I’ve been in car detailing for six years this will be a game changer for my business

[@Darealtreypiper]

Love your videos bro u inspired me to go ahead with my dream of being a mechanic

[@AyAy008]

Oh, saw this thing on that Sweet Project Car channel last week.

[@BuddysDIY]

Bet they didn't have a 20% off promocode tho!

[@matthewsequoyah2665]

Ceratrim works really well too and it’s available at Walmart.

[@blablablaunoit1285]

Good Vid. Thankx

[@ModernGunCraft]

have you tried the liquid white polish compounds on my 2013 outback it works wonders even on the roof rack which is that kinda rough bumpy plastic type.

[@spaceace6157]

Try soapy wooder next time

[@eldergonzalez6129]

Honda accord best car ever 👌 have one myself

[@diavolow9]

I just did something like this to my son corolla buy I just bought some good black enamel spray and clear did the trims and they look great for less the $20 and it will last longer then this cubes pretty sure it wears off just like if you used tire shine on trims wich work also but some won't give the expected finish.

[@RoBFE-fe5dh]

Need this for my MK5 GTI

[@honduraschris]

Wish there was a do it now and at least 12 months later video. Had my wife’s Hummer detailed 9 months ago and the trim looks like it did before … even though the detailer said it was guaranteed for 5 years 🧐

[@sebastienbolduc5654]

I have tried so many of these products, but not this one. I found that in the end I had to paint all my trim, unfortunately. However, it turned out nice and is holding up.

[@bigmike7732]

Wow magictech❤

[@positiveaspect5730]

Hi Buddy, Loving your videos. Please can you ask Lithium to honour your discount codes in Australia? There is no option for vouchers or discount codes on check out. Thanks Dan

[@DivinityHealings]

OR just use a heat gun and olive oil. The heat gun brings the oil left in the plastic to the surface and then infuse more oil into it by rubbing in a little olive oil on a cloth and rubbing it in. Cheaper, if you have a heat gun.

[@JohnDoe-md2sb]

Peanut oil or peanut butter oil....amazing long lasting results. 👍👍

[@moisespantoja2925]

Hey man great video, quick question are you going to be still uploading how to flip cars?

[@BuddysDIY]

100%

[@soundknight]

What do you use for the metal pvd around the windows?

[@enfield7123]

Duse this really work I have a v mokka with black trim plus the door edges how long will it lasts

[@federicomuller5348]

I did the same with shoes black griffin and it lasted for ever and it costed less than two dollars

[@seandillon3340]

0:21 Yessssss!!!!!!

[@brandenhaberek]

Does it work well on the interior plastics too..?

[@WJHandyDad]

looks like it does a great job... wonder if it's enough for a full Avalanche with body cladding

[@rogernatorsallaround4571]

I'm debating on trying this on my avalanche or just have it sprayed with Bedliner

[@Dirty_]

Gonna try it on my expedition

[@phon3boss621]

new subscriber here! will this work with the window pillar trim

[@TheAgwarn]

Linseed oil 👍🏼

[@benrayes4231]

Is it safe for interior plastic trim as well?

[@adamr8176]

you can do the same spraying some black magic tire shine on it

[@x-man5056]

Cerakote trim coat costs about half as much and you get way more. It may not last as long but works very similar. My truck is 20 YO and hasn't even been washed 100 times. Probably not even 50.

[@jonathangomez-vv2dh]

Is it much better than Cerakote Trim Coat?

[@oldschoolromano5056]

Chemical guys has great product for half the price

[@joed1244]

I use Cerakote. It comes in a 10 pk and it does the same job at only 16.88 price. It last just as long. Been using it now for 2 years. It's a ceramic coating. Just like this product, it not "permanent " as stated in the video. They say it lasts up to 250 carwashes. And you can just go to Walmart to buy it. No shipping,no waiting.

[@ShainAndrews]

The company is more reputable than this guy is. At least they state it only lasts for several months or about 20 car washes. This guy is just hustling to separate money from people to stuff in his pocket.

[@1maybeline]

Thanks for the heads up!

[@dragossabin8265]

nice

[@mikekharoufeh5523]

Just sub'd and 👍. Just wanted to know if this works on the lower door panel trims of a silver lexus it's faded.. thx

[@luisponce1472]

Penetrol "Flood" is Good For Black Trims and is only $10 bucks for a 30 oz Bottle 😊

[@louielou8262]

Might be a dumb question but I seriously don't know.. Can you use this on vinyl? Like your dash interior?

[@Cptkarma6]

I’ve used boiled linseed oil on my FJ Cruiser …. worked great for me…. Just saying ✌🏻

[@robertogarcia4082]

You make great videos 👍🏼

[@JetFire9]

Eastwood has an amazing aerosol black plastic paint/dye. It makes the trim look like new as well, without looking like paint at all. Is this paint/dye or a conditioner? I don’t believe it will last if it’s not paint/dye. If it is paint/dye, I am in.

[@BuddysDIY]

it has a bit of paint in it boss. This Company makes super legit products

[@ShainAndrews]

@@BuddysDIY Bullshit. The company is more "legit" than you are. The companies own admission. "Our trim protectant and restorer will make the nastiest of plastics look new again and will reasonably last for several months- about 20 washes." Oils and waxes last two months... you can't add "a bit of paint" to oil's and waxes.

[@garylivingston9052]

how many washes before it comes off?

[@2old2rodeo]

I wonder if this would work on hazy headlight lenses?

[@230rogue230]

Does this work and permanently restore moulding on vehicles that are washed in automatic car washes using high heat? I can see that this is very effective, however I use a car wash monthly and feel this wouldn’t last long in that manner.

[@americanmade7231]

Thanks Buddy, looks great. I just ordered a box, hoping it turns out equally well. I'm tired of applying oil-based trim liquids every few months. How's yours holding up after you posted the video?

[@ShainAndrews]

Ever bother to read what the company says? "Our trim protectant and restorer will make the nastiest of plastics look new again and will reasonably last for several months- about 20 washes."

[@americanmade7231]

​@@ShainAndrews did you reply to the right comment? I was asking the content creator how his application is holding up now that he's had it on his vehicle for a few weeks. I did indeed read what the company says, as I purchased this product. It actually states on their product page that "The Premise of Graphene Trim Cubes: Incorporate one of the strongest substances in nature (Graphene) in a formula that conditions, restores and protects plastic for 250 washes..."

[@ShainAndrews]

@@americanmade7231 It is all marketing wank. Using content creators to promote their products to make it seem like it is something special. Graphene is not designed for this. Its properties lend nothing to improve a product like this. In my engineering experience they are taking graphene rejects or excess from manufactures at a discount. Crushing it and adding it for pigmentation. Then firing up the marketing machine and sell a product at a premium. I give the manufacture credit for at least stating how long it will last... I bet even that is a generous estimate. It's like when all these oil additive companies started adding Teflon. DuPont had to finally come out and state the product was not designed for lubrication, and after enough lawsuits the manufactures backed away when they could no longer make a buck.

[@BuddysDIY]

Still perfect honestly. Stuff is legit

[@americanmade7231]

@@ShainAndrews LOL, agreed! I wasn't sure you replied to the right person. My favorite is when company's marketing team makes up something imaginary and promotes their product. Like your Teflon example, have you ever noticed the "Techron" in Chevron's gasoline? LOL Or when the marketing machine has nothing and wants something to say, so they increase the size of their product's container and say "NOW 33% MORE!!!!" Yeah... it's a bigger bottle. But I'll be a fool to think I'm not paying AT LEAST 33% more for it!

[@MTentertainment8320]

Buddy if you are reading this. Make q video on what to do with carbon clogged fuel injectors. Its too expensive to change with a new one. Is there any way to clean and repair it?

[@garyv2196]

Do you have anything to fix that rust under the door guard?