Motion Detection Lights - Easily Install - Cheap DIY Security For Your House - HZ 4132 BK

If you have a house, you have some exterior lighting AND you have something to protect. To add cheap but highly effective DYI security to your home, change your house lights to motion detection lights. We show you how to easily remove your old light fixture and replace it with a new Heath Zenith motion detection light HZ 4132 BK in just minutes. Quickly change you old outdoor lights for lights that turn on automatically with motion.
Health Zenith motion light are a cheap way to increase your home security and saving electricity. DIY security system for home.
We also explain the basic wiring and how to change any light fixture, inside or outside your home.
We bought this Heath Zenith light fixture on Amazon for just $30 including the motion detection.

[@CentralCanada]

Thanks for the use of the LED bulb that I presume is also your regular use HZ states use of tungsten/incandescent bulbs. I posted a query about LED usage on the UTube installation vid for the model , but no response from their tech dept. yet, as of eight months ago. LoL

[@CentralCanada]

a Tip ?; Already for my other two long-lasting' motion sensors, to prevent accidental mode switching, I attached a 3/4" copper piping bracket under the wall cover plate screw usually above it, that conveniently covers over the switch when in off' position. It can be swiveled slightly aside, when I do want to change the mode for awhile.

[@ryanrogers8211]

Thanks for the helpful tips and clear instructions.

[@sammyday3341]

Excellent instruction. Thank you very much.

[@mypointofblue5260]

Thanks for sharing. This was very helpful!

[@allenmarcus6671]

Is there a way you cannset it to stay on all the time?

[@ReggieC21]

4:06 don’t worry syrnochrcized light fixtures I’m coming to save you from your comfy junction box 😭😭😕😂😂

[@a2zcarpetcleaningllcwestpa596]

Help I have this light but it stay on I’m thinking the sensor is not working

[@nicolekutcher2782]

Can you set these to stay on?

[@Kimi.labels]

I just installed mine, thank you so much man

[@garywhitesock6239]

I watched your video after installing the same brand/ different model light. I thought I did something wrong, but found out it was the bulb. A sylvania LED TruWave technology wouldn’t work. An older style bulb worked. By the way, we had the same brass lamps. Good video instructions, thanks.

[@brianhankins9992]

I also had trouble with the bulb...For some reason the manual says to use an incandescent specifically, instead of for example LED or Incandescent. I did get an LED to work, but not the first LED I tried for unknown reasons. So I would say if one LED bulb doesn't work, just try another brand name.

[@ReggieC21]

Be careful some fixtures work better with the rated bulb for the fixture and proper switch for fixture. For example if you get non LED recess cans and try to put led bulbs in the fixtures and a dimmer switch for them guess what’s not going to work properly?????? The lights.

[@isabelsfoodandtravel4769]

Is there anyway to have the light on?

[@daywalker407]

Thank you Sir for pointing out reaiming the motion sensor

[@CentralCanada]

Mentioned in the HZ SH-4144-AZ manual.

[@Thincrust128]

What do you do if the switches to change it to test and 5 seconds will not move?

[@joselumbreras6741]

Is it possible to keep the light on all night?

[@CentralCanada]

The vid' host mentioned/showed at the end when indoors. From my own HZ model SH4144az manual; "...can be activated to stay on full bright after sunset for only one night at a time. It auto' resets to motion sensing at sunrise .... To turn on MANUAL mode, switch the light off at the wall switch for 1 to 2 seconds, and then back on. " And if you want AUTO mode back sooner than the sunrise reset. Follow the same method as for Manual' .....

[@bluediamondlover]

Love the enthusiasm! I have my lights set to come on dusk to dawn but I’m noticing they’re flickering. I’ve adjusted the sensor, changed the bulbs but still they flicker. They don’t flicker all the time but usually once they come on the flickering starts then slows down.

[@URTechDotCa]

That is odd. Mine are binary - on or off - no flicker. Do you have any old school incadecent bulbs you can try?

[@SH-jv5uf]

Hi Nancy. So are you saying these lights can be set to automatically come on every night and go off at dawn without the motion defection function? Please let me know. That is what I’m looking for.

[@bluediamondlover]

@@URTechDotCa I’ve tried dimmable, not dimmable, incandescent and LED and it still happens. I even took the lamps off the wall to make sure they’re wired correctly but clearly I need a professional because it’s driving me crazy

[@bluediamondlover]

@@SH-jv5uf yes. I purchased them from Lowe’s. They can be set for motion detection and dusk to dawn.

[@brianhankins9992]

@@bluediamondlover According to the manual (download at Heath-Zenith) a high sensitivity combined with large temperature differences of objects can cause the flickering. If you have an air vent, heater vent or highly reflective surface in the area in front of the light that is probably the issue. Best thing you can do it turn the sensitivity to minimum and possibly turn (to re-aim) the sensor. The manual goes on to day the flickering could be normal operation if heat from other objects is affecting it.

[@needles19]

Where did you get that square mounting plate so the light stays flush

[@sheriingrassiaphotos]

Our lights are way too sensitive on street traffic is there anyway to lower the sensitivity maybe by placing tape over the sensor

[@CentralCanada]

Did you turn the sens' dial down (usually counter-clockwise) to a zero-ish' position yet ?

[@jingleflagtv8599]

My model 4030 doesn't have a manual mode. I'm stuck with flickering over sensitive sensor.

[@banjoddwilt]

Perfect instructions!

[@yosselisorto3785]

So my landlord installed this but I rather have them on all day because of my light bulb surveillance camera. How do I do that. In the night it works fine but once it’s 8am it sense it’s day light because of the motion detector and has no power lighting the bulb.

[@bryanweiser7719]

You are incorrect in the most important instruction. Some lights are wires to the light before the switch so it’s VERY important to kill the power at the breaker unless you are 100% positive that your light is wired to the switch first. However, you should always get in the habit of shutting off the power at the breaker no matter what. 120 volt AC power can kill.

[@Canongang]

How do I make t stay on. It was blinking then stayed on for a few min then wouldn’t detect me when I walked outside to turn it on

[@warrendottin8807]

When the lamp has been installed and placed in test, the lights rapidly flash on and off once motion is detected. Any idea what might cause this, The lights never remain on.

[@garygullikson6349]

Can I use the "test" mode to operate lights off and on from interior wall switch and leave motion sensing off?

[@brianhankins9992]

I would say yes.

[@CentralCanada]

I quoted within a recent reply to other', a excerpt from my manual. Which maybe another answer ;-)

[@Kiefy6886]

Thanks so much! Liked

[@PeterSodhi]

Thank you

[@viswakrmacommunityfoundati9038]

How to replace 360 motion sensor?

[@jeremiahpowell3028]

I really hate how Amazon doesn’t match prices after the purchase rather then returning and buying again to get the items for cheaper

[@TheAstrogrl]

Hi! What is the red wire for??

[@URTechDotCa]

The extra wire is connect multiple units together so if the motion is detected from one of the sensors, they all turn on. I do not want that to happen so I did not connect them... but you could.

[@DavidGarcia-re9qh]

Good video. You saved some money. I think I can do it myself

[@jdgolf499]

Sorry, when making a video like this, you should ALWAYS tell people to close the circuit breaker.

[@jamiewood5086]

next time put some tape on your hand stop you droppin the driver

[@MeMe-ed2rk]

You just cost the shipper money. Don’t return like that😢

[@URTechDotCa]

I am not sure what you are talking about. I still have those units on my house and they are working great.