Motion Sensor Light [ DIY ]

[@unitedcomputer8101]

Thank you, this circuit is working. Thank you so much.

[@vinothkumar-qn4bs]

The íl p M.

[@nwankwocharles1130]

How many watts was your bulb?

[@harasoranitin8351]

Sir light bandh nahi honi chahiye eshke liye kya karna chahiye

[@ethicalhacker1]

I followed everything exactly but the bulb turns on as soon as switch on the power and stays on like a normal bulb, I had tested the motion sensor before using it, can't understand the problem, can someone please help? My 5v power supply provides about 5.8 v maximum, is this too much for the 5v navinex company relay?

[@kinggamer8835]

@@ethicalhacker1 same problem for me bro.

[@esoofikader3135]

KZbin has several videos, but this was the best explained...5 stars to you, i made one light outside my main door and its working fine. Thank you.👏

[@nischalthakur1892]

सर मेरा नाम कमल कांत है मुझे 10 पी आर आई सेंसर कंप्लीट बने हुए चाहिए आप कितने का देंगे मेरे को मेरा नंबर 92127 19814 है

[@nwankwocharles1130]

How many watts was your bulb please?

[@Shubham-9996]

@@nischalthakur1892 कितने के मिले

[@VarunRao009]

​@@nwankwocharles1130 *LOOK LIKE 5 WATT.*

[@vinaydhan6635]

Thanku sir....Electronic meri hoby hai...isliye bahut chanal ko follow krte hai aur video v dekhte hai....pr aapne itne ache se Wireing ko explain kya hai...ki aap ka bataya koi v project banana...bahut easy ho jata hai....thanks.

[@citizengkar7824]

As others have stated, one of the best examples of this type of circuit. Clear & concise (given it is not narrated), with a nice clean, professional looking build.

[@vamosabv]

What a comprehensive explanation with detailed instructions even in the description!

[@Sketchtime-003]

..And this was a Perfect and detailed video after many..circuit working perfectly..thank you very much..!!

[@technicalsohil4063]

nope

[@consumercourt]

This video is the best. Very properly demonstrated without any confusion. Very neatly done. Thanks.

[@hariharan.n5599]

👍Professional touch can be seen throughout the video. Keep it up🙏

[@gsatya9732]

It's working perfectly

[@indikafernando5813]

You do it nice & clean. You gave me a new idea also. Thank you so much.

[@BIKRAMDAS-hm9by]

Thank you so much bro itni acchea tarike se samjha ne k liye

[@jhana.2023]

Muito bom ! Simples e claro. Ganhou mais uma inscrita. 👍👍👍👍👍

[@nimya8282]

Thank you so much.it was my final yr project,worked well.also pls give circuit description to add to my project report

[@anilkumargoel307]

Can we use triac in place of relay Anil Kumar Goel

[@gilman7608]

You can use bc 547 which i think is more common And the resistor could be 1k ohm too I had 470ohm i used that

[@tibrewa6879]

I cant find screw terminal what to do?

[@ernestocardoso1911]

thanks! It helped me a lot, your videos are well explained! success!!! 

[@42.attuan34]

Can I use transistor 1w 220 ohm? Rely to me early, thanks.

[@astronic4522]

Verry well explanation👍🔔🙏 6:50

[@riddhi6535]

is this the type of light that turns on automatically if it senses something within its diameter/range? And will it sense other things like toys or metals as well ???

[@snnyhacksci.5984]

PIR sensor will only sense motion done by any warm bodies, such as Human or Animals.

[@ethicalhacker1]

I followed everything exactly but the bulb turns on as soon as switch on the power and stays on like a normal bulb, I had tested the motion sensor before using it, can't understand the problem, can someone please help? My 5v power supply provides about 5.8 v maximum, is this too much for the 5v navinex company relay?

[@NoobMaster69-gk1qu]

As soon as i plug it on the bulb just turns on and pir doesnt seem to work. What is the problem?

[@mdkaifali2163]

explains everything very easily... awesome keep going sir...

[@s.asharma2965]

Why do we need adapter??? Can we directly connect to power without adapter

[@TheOnie1234]

My usb cable has 4 wires. What should I do? . Should I just use the red and black and disgregard the other 2?

[@jonnycullinane4098]

Hi, I am doing a similar project to you and I was just wondering what light bulb you used?

[@thedesishow1223]

Simple way. Easy way to understand..

[@MrRamtahiliani]

is it ok if i use transistor 547 instead

[@bajlurrahaman6111]

I am trying this sensor but motion not working properly, without any motion light on off , or some time light no off . Kiya kore sir ?

[@ashu22online]

It's working.. you are a star 🌟

[@tanishkakiran2112]

Can you please tell me how to do without the h screw 2 way terminal

[@skgamingandvlogs5550]

Can I use another transistor and resistor

[@rajeshmakwana2014]

Thanks this circuit is working and I using in my class project

[@kishorekoli5138]

I don't know the internal diagram of relay used but according to me he is connecting the nc and common of relay instead of the coil of relay so how will relay work

[@allroundutuber5959]

Its blinking why please solve

[@TechnicalElectronic]

Brother how can its work the output sensor is only 3v low..the relay is 5v I can't understand i have try many many time.How its command from pir sensor output.. Help me pliz. I have seen many video from KZbin ..most people are using Arduino.

[@nishipaul3886]

This video is great. I want to make one. Please tell me what is the name for the device used for attaching the parts by heating?

[@HarshiClasses]

soldering iron very inexpensive max price 350 rupees

[@harshadtale3362]

Can u please help me out with my problem I have done same connection but then also my circuit is not working The relay is making sound but the light is not glowing

[@hardikdobariya2733]

Motion sensor out put voltage is 3.3v but Relay is operated in 5v.So my circuits don't working, give me a solution.

[@snnyhacksci.5984]

@Hardik Dobariya yes you are right, Motion sensor output voltage is 3.3v, also the maximum output current of this sensor module is very low which can't drive a 5V Relay, that's why we are taking help of a transistor(2N2222) to drive the Relay. Thanks''

[@gunjinaveenkumar6892]

Can we use bc547 transistor

[@chandandas647]

I have the 2 chanal relay module so I can't understand the connection so can u please explain the connection..🙏🏻

[@debom5346]

Greetings, I need a help hand. I just connected the circuit to a control unit and my relay its not stable. What can be a problem

[@dasarikiran1537]

TQ Somuch 🙏Sir This is very use full vedio

[@tanmay93sarkar]

Sir, can you please explain how to make a 12" automatic exhaust fan for kitchen?

[@hsyweightlossdiet96]

I have used 150k resistor. Not working .. is it becoz of that ?

[@Mehedihasan-dm2tq]

Wow.... It's really true!!! 100% working...

[@idubai7893]

I assembling this ,very good ur videos

[@vasaharsha789]

Circuit is working but automatically on and off countlessly, how to solve

[@wahidshaikh6206]

Isme 12 v ka relay laga de to chale ga kya

[@andresfigueira1868]

Very good job man!!

[@WorldScopeinfo]

6v rilay can ?

[@ManiMani-cl3du]

Can I use Bc547 transister this circute

[@nortok00]

As others have mentioned this is one of the best videos detailing this DIY project. Thanks for posting! Do you have a video (or can do one) that details how to wire this with a plug socket instead of the light? I want to DIY a motion sensor that I can plug lights into (regular light bulbs like the ones shown in this video). I need to power a bunch of lights not just one bulb so want to plug a power bar into the motion detector. I can't seem to find anything. Your video is the closest I have come so I now know how to wire the PIR but I'm not sure how to wire up the plug socket portion of it.

[@phongvothanh2452]

Dear Sirs, 1. How can I adjust this circuit not work on Daytime? Just work on Nighttime only? 2. Where can I buy white plastic box? I can not see on Amazon?

[@IbrahimsWorldVision]

Can I use 12 v led light instead of Ac bulb?pls tell

[@nikrosmarinanikmohamad9132]

Can I replace the power supply with batteries.... also can arduino uno also be used to put in the USB

[@ethicalhacker1]

Can we use this same transistor for connecting the pir sensor to an led strip?

[@WorldScopeinfo]

Can a 6v rilay

[@engr.irfansultan]

I built the similar circuit but used a different transistor and a different resistor. The circuit works but response time is too slow. What can be the possible problem? us it due to the transistor and resistance or my sensor is faulty? Can u plz help.

[@ashishreddy328]

Hi, If turning light by sensor ,after how much time it will turnoff?

[@dariushkhorramtash]

this is a sample of professional video making. thanks for sharing 👌👍

[@technicalajit9426]

Sir relay was continue in on condition what is problem behind that

[@ianhesm8815]

CAN WE USE DC BULB?

[@VivekGangwar02]

I need to make this device for intrusion detection in farms, for the case I need it to cover a longer range. Is there any PIR sensor which comes with longer range? Or any way by which I can extent the range to atleast 30metres?

[@rustamali8309]

good explanation Nice 👍

[@fakhrurraziq5103]

Can you explain how does it operate?

[@lifeofsabeen6665]

Awesome work. 👍

[@mr.science1379]

Can i use 12 volt relay and 5 volt power suppely

[@digitallifetanzania2373]

I need my light to stay on in 1mins without Arduino what should I do press reply

[@mpartha8103]

I can use many pir at once?.I will use it on the stairs.

[@indikafernando5813]

Dear friend did you make clap switch circuit? If you have it send it to me please. thank yoou

[@digitalcreator1793]

How much cost all parts ???

[@SHAIKH_GAMING.]

Bhai isme 12v ka relay chalega kya

[@satyajitmandal4787]

The best video on this topic.

[@dishantgauswami4808]

Can it works on daylight

[@snnyhacksci.5984]

Yes,

[@dishantgauswami4808]

@@snnyhacksci.5984 thanks

[@snnyhacksci.5984]

It can work on daylight. but sometimes, under direct sunlight sensor may cause false trigger. [ the sensor we are using is PIR(Passive Infra Red) which detects change in infrared and sunlight also contains infrared light so If sensor is placed under sunlight then sometimes it may cause false trigger]. .thanks

[@dishantgauswami4808]

@@snnyhacksci.5984 Thanks

[@benneroseayo]

Does the transistor value matter?

[@styrishrodrigues]

Configuration and pinouts matter

[@lakshanmadusanka5315]

I want to know why to add diode. How to work diode on curcit. Thanks you sir. This is best one.....

[@Tumsakari]

Whats the use of the transistor

[@sakshipawar9599]

Sir i have connect the same but still it is not working how can I find the error?

[@leon9357]

How to operate 12 V LED strip with PIR Motion sensor? Please help.

[@jimmyvaca9968]

I want to replace the H terminal with another that you recommend

[@sisisimon1985]

Did 6V Relay is possible instead of 5V Relay?

[@snnyhacksci.5984]

Yes,,,,

[@yrb2257]

@@snnyhacksci.5984 Can I use 5v 10A spdt relay

[@akibdiwan6585]

Ye transistor 2N2222 , 12 volt par bhi kam karega ya aor jyada ohm ka resistor lagana padega ? Please reply.

[@snnyhacksci.5984]

use 12V relay, If you are using a 12v power supply; no need to change anything else.. ..thanks

[@akibdiwan6585]

Thank you 😊😊

[@rustamali8309]

why diode connect parallel with relay terminals ?

[@nwamakanjoku5146]

Does this sensor work on inanimate objects?

[@shz12345]

How can I make its time unlimited? Or for hours?

[@prathmeshchopade2213]

How should I increase on time more than 6/10min

[@bruh6000.]

Someone explain the use of that transistor

[@mahedihassan7611]

Brother is 6 volt relay work in 5 volt input

[@snnyhacksci.5984]

Yes,

[@dancingcalories5519]

i operating the same setup with 12 input while controlling 220v light using 5v relay. but the life span of this setup is not more than 3 month. I dont know y?

[@Gamers_Game_club]

Can we make this without diode

[@akibdiwan6585]

Sir I can use 12V DC power supply and in case of 12 V relay , I can connect directly 12 V led strip light ( or 12 v load ) ? Please reply .

[@akibdiwan6585]

Please reply

[@snnyhacksci.5984]

kzbin.info/www/bejne/q6Xak2qaoLSBl9E Please see description

[@abhiramrayalla4584]

can I use DL 5V relay sir

[@yogitech8959]

Bro this motion sensor was take 5sec delay after its turned off. And it's not detected continuously bro. So can u fix its issues?

[@-al-jinnzera8923]

So Clean And Neet

[@vinaygprakash5819]

Can I use bc547 transistor instead of 2n2222 transistor

[@snnyhacksci.5984]

Yes, Please see description

[@hsyweightlossdiet96]

Do we need to change the connection accordingly to transistor ECB ?

[@dhaval6959]

Can it work perfectly?

[@Alex-Tdv]

tu me sauves la vie pour mon MagicMirror :)

[@Shashik539]

Sir will it work on door When I go from door does light will on automaticly?

[@VEERsciencePROJECT]

Good idea

[@jaysonjoson8241]

What kind of bulb i can use .