I love the fact it’s a dog friendly work place. Boxers photobomb makes my day. 🐶🐶 Wally needs a coyote and a whipple.... he’s earned it.
@jessegriffin84574 жыл бұрын
Loving this build, and this channel is becoming one of my favorites keep up the great videos, and having a Bad Ass small tire nova doesn’t hurt either 💪🏼🇺🇸🇺🇸
@adamwinters44484 жыл бұрын
This is by far my favorite KZbin channel..Thanks for taking the time to do these videos
@BB-rn6so4 жыл бұрын
NO DOUBT ONE OF THE BEST OF THE BEST.
@LeftForDeadGarage4 жыл бұрын
Ole Wally needs some special love for Race week 2021.
@keefespencer11734 жыл бұрын
I was saying the same maybe a built Coyote with a TH400 with a Gear Vendors Overdrive and some type of power adder and a set of Viking coilovers and a Quick Performance 8.8 posi-trac rear but put a good fender on it and put the hood back on and put the factory seats back in and if a cage needs to be put in then tuck it as much as possible so it can be a complete sleeper
@davefroman47004 жыл бұрын
Wally needs a coyote
@randyd94144 жыл бұрын
wally needs a welded diff
@davefroman47004 жыл бұрын
@@randyd9414 Doesnt have the power to turn both wheels.
@ponypwr4 жыл бұрын
Huge shout out to you guyz for going with a Coyote in the Ford instead of the LS . If someone would have told me that Motion Race Works was not going LS, I may have lost my lunch $.
@thebearsquad44 жыл бұрын
is it just me or is volume of the video much lower than everything else?
@Tilpants4 жыл бұрын
It's up and down like an elevator.
@dipe2774 жыл бұрын
I've watched this series, and never seen the 4 link or 8.8 get installed
@CarlosMontalvoGhigliotty4 жыл бұрын
Breakfast video before work, turning wrenches, and welding, what better I can ask! All that before my day start, and I start coding. Priceless. Thank you.
@TGSamantha0914 жыл бұрын
I really miss my 1983 5.0L Mustang GLX... Yellow with black interior.. Some engine work that myself the previous owner and by boss did at Sub base Hawaii hobby shop =) plus other custom stuff including monza tips on exhaust hehe
@Mr.Mopar.23-79 ай бұрын
The tire shop comments, lol. Every car guys nightmare.....the tire shop. First thing they do. They take a fresh sticky tire that's been been rolled around a bit, picking up abrasive dirt and rocks, stand it up on top of a very expensive wheel that's clamped in a wheel machine, and scratch the f out of the wheels. I got so tired of the nonsense that I purchased my own equipment. I do my friends' tire mounting and ballancing without damage. Imagine that.
@miketestani97074 жыл бұрын
You should give this car a Full Crazy looking Eye Catching full wrap job with your branding on it and make it your version of a well rounded "Fun Haver Car" that can do a bit of everything like Vaughn Gittin JR did. With it being a well rounded Motion Raceworks branded "fun haver car" that could also drift as well as drag you could get more people from the drift community to notice and start buying your products. It wouldn't hurt to do some crazy body mods as well as the wrap making it look as wild as possible to catch the eyes. The crazier it looks and more attention it gets the more publicity it will get. The different it is the better as far as getting the whole community's attention. It will definitely make your company's sales increase which would lead to you being able to build crazier and crazier projects. I feel like it would help you branch out into more areas. which will help you company's growth continue. LOL Just a random thought
@tacofry47684 жыл бұрын
Im smelling a little ruby/fox body showdown in a later episode 😂😂
@justinlienhoop44784 жыл бұрын
Rolling the rear fenders would complete the stance 👍🇺🇸
@UncleElroy214 жыл бұрын
*Shop Neighbors see white smoke* Them motion raceworks boys must have filled that Nitrous bottle up again
@growlith69694 жыл бұрын
What the hell do you think you're doing? If you want your KZbin channel to commit suicide then keep piling the advertisements in there as thick as you have them in this video. Come on it's not like you don't see Pros doing KZbin everyday, take some notes get rid of some of the ads. I only watched half the video and it was bad enough that I did a thumbs down. And that's coming from somebody who actually likes you guys.
@drqusk4 жыл бұрын
This channel is turning out to be awesome!
@connerwheatley26374 жыл бұрын
These videos are awesome! You guys have a super cool crew and lots of American freedom!!!
@kentbuerk94794 жыл бұрын
Wally needs to go back to Rocky mountain race week with a coyote and a 671 sticking out of the hood
@87mustang3474 жыл бұрын
not sure if this was already asked but what size wheels and tires did you go with? they look great on there. did you have to do any massaging to fit?
@erikrowsell48144 жыл бұрын
I don’t know if you said and I missed it but who’s cage kit are you using
@extremecheddarswityomom3 жыл бұрын
Glad yall built a fox body and actually kept true to the brand and put a coyote motor in it and not an ls like everyone else.
@Phil-rs5wl4 жыл бұрын
Dry ice works better to clean out the sound deadening than a heat gun.
@weaverfromtha9134 жыл бұрын
wally needs a swap doug. so then he can go play with neighbor
@Nathan-qm6dh4 жыл бұрын
Valve springs..its a coyote not a LS lol..
@springamike2 жыл бұрын
What’s the backspacing on the rears?
@bkdauto4 жыл бұрын
Wally needs a better sounding exhaust
@TheLuckyone7603 жыл бұрын
Fuck these ads are annoying as hell.
@directdiscountusa4 жыл бұрын
What cage kit are you guys using?
@justkidding35294 жыл бұрын
Awesome burnout. 🤣🤣🤣😵
@keefespencer11734 жыл бұрын
After the Foxbody build and adventure is done hopefully by next Drag Week or Race Week I think it would be awesome to see James with his F-body with his girl driving the LS Mazda and his Dad in his Buick Skylark, Doug in his Nova, Bad Chad in Wally but first put a posi-trac 8.8 rear from Quick Performance with a set of Viking coilovers and drop a Coyote engine in it with some sort of power adder but put that plush interior back in and the hood and make it a sleeper and then of course the GTO and the Blazer and then Mike Finnegan in Blasphemy and his boy in his Nova and Cleetus with his Elco and a hired driver for Leroy and of course James in Ruby and Kevin in the Dale truck again or kevin in his blue Camaro he races and you can't forget Flying Sparks Garage and then Brent in his car he's building and Jamie in his car and Kyle in his car and Emilio in his car and then you have Alex and Dennis Taylor in their cars and then Tom in the Why Not 5th gen Camaro and Royce in his blown 65 Mustang and all you then is Joe Berry in his car and his son in his car and his wife in hers and then Tom Bailey in his car and Tina Pierce and her husband in their trucks and hopefully Reaper and Andrade build cars for Race Week that will challenge Tom Bailey and the other fast cars plus all the other cars and that to me would be the ultimate Race Week and what would make it even better is if they came to the East Coast but that is the ultimate Race Week to me because of all the KZbinr's that are in it making videos each day and keeping up with all the progress because I like watching everyone's videos over watching the live feeds and it's pretty much all my favorite KZbinr's in one place all in the same race just I wish 1320 Video would get some help in covering more of the racing but we all need to work together to make Race Week as big if not bigger than Drag Week or all the racing KZbinr's need to get together and make their own Race Week/Drag Week event and if you ask me Bradenton and the Freedom Factory would be the best place to kick it off and end it since they are sidexside of each other and have the gates open to where you basically join the parking lots and have drag racing,drifting,car show, and burn out contest or just make it like a Race Weekend like from Wednesday to Sunday to cover all the action
@jaredspear81404 жыл бұрын
Hell yeah. Always time to take a break and let Ole Wally stretch his legs. Wally is a BEAST! Lmao. Cars coming along nicely guys. Can’t wait to see the finished product and the colab on MRW parts plus all the other manufacturers. El Toro is going to be one hell of a unit. What do those TBM brake kits run approx?
@jagunn19724 жыл бұрын
need to weld the diff or spool wallie
@tnabn13084 жыл бұрын
you know once that car is done its going to be a piece of junk you should just finish it and give it to me. LOL . love the videos man keep up the killer work cant wait to see you guy's running 8.5 in the 1/4 in this
@dewaynelong56934 жыл бұрын
Super proud you guys showing a lot of people up...(by NoT putting Ls)(lol) in a stang!
@Very_Angry_Citizen4 жыл бұрын
I didn't like those rims when you opened them, but DAMN they look awesome on that car! You f@%kers Rock! Wally has a special place in my heart that's for sure.
@yankey44 жыл бұрын
NICE guys love it. Thanks for sharing. God Bless.
@Thedealershipguy4 жыл бұрын
What did you guys do with my black c5 z06 I sold you guys?
@cavylevis19854 жыл бұрын
It got used for R&D and then left to its new home down in Alabama
@mrray554 жыл бұрын
Could this be the start of the motion Raceworks speed shop, for building customer cars? Great video.
@Torqed994 жыл бұрын
This by far one of my favorite channels on KZbin. What cage are you guys using? It almost looks like a jegster cage.
@matthewtaylor33084 жыл бұрын
Clearly Wally needs a 7.3 Godzilla swap and then spray it to 1500 HP!
@jpiz2244 жыл бұрын
Stepping up the editing skills!
@unnatural12794 жыл бұрын
I understand why you are using this car but l was hoping Wally would have been the build.
@jonprice16234 жыл бұрын
Whered you get that car?
@fresco72054 жыл бұрын
You should use dry ice to remove the sound damping material. Works better than a heat gun.
@krishiatt72034 жыл бұрын
Tomorrow can't come fast enough, killer series! Those wheels tho...
@StonkeyDomp4 жыл бұрын
#WeldUpWally #LincolnLocker
@jammin20704 жыл бұрын
Hell yah let’s go !
@fox-body4 жыл бұрын
Wish I was building my car at a parts store.🤣
@Dontyahateit4 жыл бұрын
A great bunch of guys right here. Awesome build and excited to see this thing run.
@justkidding35294 жыл бұрын
Daytwo
@jamesdelavan95734 жыл бұрын
Using Dry Ice for the win on removing sound deadener
@justkidding35294 жыл бұрын
Are.you painting the car. What color😃
@MotionRaceworksOfficial4 жыл бұрын
It’s gonna stay just like it is for a while til it earns its stripes
@mrfunkybritches55914 жыл бұрын
@@MotionRaceworksOfficial A stripe for every pass? 😂
@MrMadkaw4004 жыл бұрын
Love this build
@alexelrod2424 жыл бұрын
Ummm are we gonna see the 8s for $8k muatang vs the 8s in 8 mustang?!
@travisburch69704 жыл бұрын
Poor Wally he begging to be a 8 seconds car😁
@hmfritts14 жыл бұрын
Gonna be sick. Wally gets the next coyote!
@jasongrimes17044 жыл бұрын
28x9 will go on it that’s what I have on mine
@brandonfairbanks57644 жыл бұрын
Great build. I look forward to seeing the car and meeting a few of you at Fl2k. You gonna pick up the bald regal from cleetus shop?
@MotionRaceworksOfficial4 жыл бұрын
We will probably leave it there for Cleetus and cars in November! Can’t wait.
@chrisclinard19074 жыл бұрын
Love the videos guys. Keep'em coming!
@stevecareless69694 жыл бұрын
Looking forward to the next video. 👌👍
@justkidding35294 жыл бұрын
👍🏻
@crazyd13774 жыл бұрын
You guys have all the fun at work.
@MrWaggl14 жыл бұрын
I hope its called the motion mustang
@KalFx34 жыл бұрын
Diggin this series, this shit is fun to watch
@fast97z244 жыл бұрын
It must rock to work for motion! Fun times!
@JohnTaylor-kh1sv4 жыл бұрын
Love the channel keep up the great work
@LS__8124 жыл бұрын
Dem Wheels!! Whoo Weee! 🔥🔥
@shanewright69584 жыл бұрын
Too much fun guys 👍👍🇨🇱
@-g-lock8134 жыл бұрын
count the time he says unit
@Thedoctor4x44 жыл бұрын
El toro love it!!!!!
@KW-nh7bo4 жыл бұрын
You guys Rock🤘
@michaelgeorge1634 жыл бұрын
When is the blazer coming back?
@MotionRaceworksOfficial4 жыл бұрын
After this project
@Hemi244 жыл бұрын
Love it
@wayne35464 жыл бұрын
Where did you buy your break kit from
@MotionRaceworksOfficial4 жыл бұрын
Motion Raceworks
@nickm98544 жыл бұрын
@@MotionRaceworksOfficial what size and back spacing are the rears?
@danmyers93724 жыл бұрын
Roll the inside of those rear quarters and put a 28” tire on there! A 26” tire is really going to be traction limited...
@mrfunkybritches55914 жыл бұрын
You have an awesome team over there. This is going to be a channel I watch every day. Love the content and Wally hahaha. Nice touch with the car part graphics