Streetfighter V4S Gets a Titanium Exhaust! | Arrow Works Full Titanium Slip-On Install | Motomillion

[@2Lavelle]

Probably the best sounding exhaust for the streetfighter

[@Motomillion]

It sure is on the top of the list!

[@mprpitbike8935]

It’s stupidly loud 😂

[@lukjno6345]

That's because you haven't tried the SC-Project CR-T M2 😏

[@brownrandall1248]

Aaàaaaaaààaaaaaaaaaaaaaaaaaaaaaaaaaaaaaààaàààaàààaaaaààaaaaaaààà4​@@mprpitbike8935

[@mtmatt8958]

You are a beast at installing parts on these high end expensive motorcycles 👏 making it look easy

[@Motomillion]

Thank you!

[@Mr.Bearded.Mechanic]

I would add, cleaning the pipes with IPA after finishing the installation to remove grease and moisture from the hands. It can burn on the pipe and leave a nasty mark (a bit like when you melt your shoe/plastic on the pipe). Excellent, detailed installation and the bike has awesome sound at the end :)

[@Motomillion]

Yes! Great tips that we must have missed mentioning in the video! Always clean the pipes before starting the bike 👍

[@remsangachhakchhuak1738]

You know it's gonna sound nice when it's Manny from motomillion.

[@sujoychowdhury41]

I just amazed to see, How every inch of the bike even inside is soo clean!!!!!

[@bertdejesus3578]

One of the best install video. Beginners can do this well by watching this video, Good job

[@King-Arthur-The-First]

Thank you so much for this extremely well made exhaust fit vid 👍💫

[@Motomillion]

My pleasure!

[@walangkwentangtv5043]

I'm inlove wtih this bike. Sound check is pretty louder and pretty good to my hearing taste.

[@BharathKumar-so8vb]

I like the sound and you showed the way of installation is awesome sir. Great things learning from you is an lesson for us sir.

[@Motomillion]

Thanks 👍

[@CrayzJohnny]

Manny is one class act. Great job bud!

[@Motomillion]

Thank you!

[@ryanmalone2681]

Such a huge operation just for an exhaust!

[@Motomillion]

It is not too bad, if it was a full exhaust, the radiator, the rear subframe and the tank would have to be removed too!

[@NZsarge1]

Arrow make nice stuff, had a can and mid pipe on my FZ1 S, made it sound tuneful but very angry 👌🏼

[@minusx31]

Just ordered mine...can't wait!....

[@pavelpetrov8473]

thanks for the help with the installation!

[@Motomillion]

Glad to help!

[@OwnerOP]

Supreme Quality. 🎯

[@Motomillion]

Thank you!

[@HardcityRaindrops]

Started a ninja 400 now I got a 23 v2 for my channel I’ll be buying all my parts from you

[@gruhnchris]

Will a servo buddy work?

[@ArvindSingh-hf2zd]

Sounds better than the wheel barrel Akra

[@motoyan0531]

Watching from the Philippines 🔥🔥🔥 great video lodi

[@Motomillion]

Thank you!

[@ryanmalone2681]

Some sound while the bike is on the move giving it the beans with the new exhaust would have been brilliant.

[@Motomillion]

Noted, for future videos.

[@automandan]

Ahhh music to my ears.😊😊

[@Motomillion]

Yes definitely!

[@leopatt1264]

Great ...now I just need a bike to test how much I learnt 🙂

[@ChunDayOfficial]

Always my favorite Ducati v4 + Arrow exhaust

[@Rockone25]

Epic 😎, sound is amazing nd Streetfighter always look stunning ❣️

[@Motomillion]

Couldn't agree more!

[@jrpm_vlog8068]

I love watching motomillion installation so much knowledge and TLC in every installation 😊

[@Motomillion]

Glad you enjoy it!

[@DucatiDiaries]

Sounds epic.

[@dariocampanile6025]

it is poetry!

[@michaelstanfield5662]

Manny, you made that look easy, probably because Jaret wasn’t helping you 😂

[@Motomillion]

We'd be down a few drinks in by the time we had installed the exhaust, that may have caused some complications.

[@nathanpani70]

Good mechanic

[@kevinjoyquerubin7256]

This is for Only in my dreams 🙂

[@jerrybodosaofficial7135]

New subscriber from India bruh❤️🇮🇳🇮🇳🇮🇳

[@slyr1]

Sounds Awesome......

[@powamoto]

Love the sound bro 💯⚡🤟🦾

[@R-Tap]

The sound is just rude, amazing, I want it.

[@superbikesquadracer]

Perfecktion every single detail!

[@Motomillion]

Thank you!

[@ridershifu]

2:15AM IN India right I'm getting connected with your videos

[@musamusa2961]

Thank God I will buy one for myself

[@OGNowa]

only reason i subscribed is you called it DB-killer, not a baffle

[@Keno_psia]

Wow ! Now i just need the exhaust and u to install it... and the bike of course

[@ShifatVlogs46]

I Love this bike❤️❤️❤️

[@chefmactv]

Hello idol,shoutout from Philippines!🇵🇭 Nice bike 🏍️🏍️🏍️

[@Motomillion]

Hello 😊 Thank you!

[@MadaraUchiha-fg6pz]

When I get my exhaust, DB killers are the 1st to go when the box is open😆

[@mprpitbike8935]

That bike with that pipe you need the Db in 😂😂

[@trevorbye6965]

this video was super helpful with removing the factory exhaust, but don't get it twisted... it is a BITCH and a half to remove. The hidden hanger shown at 4:33 I used a phillips screwdriver + rubber mallet, and had to smash the bushing and rubber grommets back towards the rear of the bike, bending the mount that's welded to the exhaust in the process. The only other way to free this mount would be to remove the entire clutch-side rearset to remove that mount, but you need the bike on a lift or something because it can't be on the kick stand. Spraying WD-40 on all the hanger connections also helped a lot. From here, I had to completely free the connection to the rear headers before I could even get the underside (front headers) connection to budge at all. Basically just get a rubber mallet and beat the living hell out of it until it's free, and once you get the top one completely free, and the hidden mount bashed in, it will come off fairly easy. Also good luck doing this and keeping the stock muffler in tact, mine was completely mangled and disfigured when I finally got this hideous mass removed 😅 good luck!

[@dipakdambale4217]

4 in two 1 exhaust lest'go

[@gamingjappuzz5806]

19.5k💖😍

[@normantoliver4823]

I bet your neighbors love you lol. Great job!

[@johnrobertson5489]

Cracking video as usual, Would you guys know what the difference is between the 21-22 model and the 2023 models original exhaust silencer? I’m struggling to find this information but I seen the 2 has different parts numbers

[@Motomillion]

The bracket where they attach.

[@lriag.k7849]

14:16 riders motto 🤣🤣🤣

[@Naga-Night-Rider]

wowwww....love your bike bro ....and the sound 🤤🤤....but can you do it when dp killer is attached???? please

[@Motomillion]

We will try!

[@rubyv4s]

I wish I could hear this in person, just got a 2024 and just for the looks I’d like to have this exhaust on, but the stock one is already a bit too loud and I’m not a fan of loud noise. Does this thing get annoying on long rides? You made this install look easy. Great job at showing how it’s done.

[@marcosalvarenga75]

Mani, you missed the spot in my garage to put this beautiful machine! LOL This Arrow is just perfect!

[@Motomillion]

haha! Yes this Arrow is very fitting to these bikes! Great quality and amazing sound without breaking the bank. Also fairly easy to install as demonstrated!

[@Jorge_SR86]

Good video, how hp increase with this exhaust???

[@jayvdz]

Nice. Would love to have seen three DB readings as well: before, with baffle and without baffle. We have noise restrictions at UK/EU circuits, so it’s good to know these numbers.

[@Motomillion]

That would be ideal to do, however every track has their dB reading from a different distance which also makes it very hard to make such data usable for everyone.

[@cadex8318]

Not legal in EU/UK anyway because no KAT

[@F1NAN6EL]

Nice video man, amazing sound❤️ Giving a subscribe💪🇮🇹❤️

[@Motomillion]

Thank you for the support!

[@F1NAN6EL]

@@Motomillion You're welcome, mate👍👍💪

[@ivanpenev9100]

Very good

[@ITS_ME_MIING]

MY CONTENT IS LONELY 😢😢 EVEN THOUGH IT'S LONELY MUST BE SPIRITUAL FOR ALL OF YOU ♥️♥️😭

[@monicalopes1860]

Estoy enamorado de esa moto ,es mi sueño 😍😍😍

[@karlwilliams8208]

Outstanding.

[@Motomillion]

Thank you!

[@dieseldad60]

Awesome video.... did you do anything with the servo motor plug? Just stuff it back in or ?? Sorry if I missed that.

[@Motomillion]

Capped it and put it away.

[@dbandler1]

@@Motomilliondoes arrow provide a cap for it?

[@777kamon]

Nice bike... Just like mine :)

[@Motomillion]

Thank you!

[@derrickgarcia2002]

You guys are going to make me spend some money!

[@Motomillion]

We are ready whenever you are!

[@FastV4]

Do you have to start up the bike before installing the upmap? Or first install Upmap then start the bike for the first time?

[@Motomillion]

First install and then start. Check out our upmap instructional video.

[@bikebike9227]

Hello! I have questions Do I need to install an upmap? And how long will that take?

[@mylifeinnewyork5625]

personally i feel arrow is the best on this bike but the arrow stainless steel one might sound better! very nice install vid

[@Motomillion]

They sound both the same.

[@christospakyriakou]

Like it! Will buy it but I have an issue. Have you seen the blueing of this exhaust? I think it does not look good at all from some photos I ve seen. Looks rusty and old compared to the Akra. Would you recommend the steel one instead?

[@Motomillion]

To be honest the Arrow gets a nicer blue color than any other exhausts we’ve seen. Both this and Akra are great. Never seen one resemble anything like rust though. Rust is more brown/orange color. If you want to keep it simple the stainless is the way to go.

[@christospakyriakou]

@@Motomillion I prefer the sound of the Arrow for sure 100% but I am disappointed from it's blue. Maybe it's because I haven't seen it in person. If you could send me some photos of it when it gets blue it would be very helpful!

[@thetravelsadhu5226]

Bro I need that t shirt ❤️

[@valdemar7986]

hey, guys. quick question. do you need an ECU flash for the bike to work properly after the swap? also, would it require an air filter upgrade or you can run this slip on with an OEM air filter? thank you.

[@Motomillion]

It is advised to at least run the T800 UpMap with it. The UpMap is optimezed for the P08 filter.

[@christospakyriakou]

@@Motomillion The majority of the users said that the UpMap is not the best ECU for Arrow, that it messes the bike after installation, and many were very disappointed by it. What is your experience with it? Do you know any worthy alternatives?

[@minusx31]

I got the C clip off but the baffle wont budge!…im just bending the baffle edge trying to wiggle it out!…

[@Motomillion]

Use a slide hammer. They are often pretty tight.

[@fsglimaable]

no Problem with Engine Check in Light coming up??

[@kaushikavadhanula422]

I wonder how this will compare to the akra that Ducati just released

[@MarinaraTrackDays]

Set your camera setting for "Focus Area" to "Center". It will eliminate a lot of this focus trouble. Honestly was a little hard to watch, love your videos tho!

[@Motomillion]

Around this time we just started using a new camera and still hadn't set it all up correctly. Thanks for the tips! Check out our latest videos, we think we've improved a little in the filming :)

[@MarinaraTrackDays]

@@Motomillion Oh for sure, I just found your channel and have been binging the hell out of your videos! Awesome content, trying to decide between panigale or streetfighter V4S. Your videos have been super helpful!

[@michaelbrixcordova7294]

I love it the sound of the exhaust

[@Motomillion]

It sounds amazing!

[@christospakyriakou]

Can you remove the rear wheel without taking the exhaust off? Like the Akra?

[@Motomillion]

Yes of course.

[@christospakyriakou]

@@Motomillion That's awesome!Thanks 👍

[@andreasiracusano8278]

Quick question, what happened to the lower chain guard? Were you able to install it back?

[@Motomillion]

With the exhaust systems, the lower chain guard is removed.

[@andry9289]

@@Motomillion any options? I am spraying grease on the muffler... :(

[@charlycharly3727]

Salut petite question, est-on obligé d’injecter une cartographie avec la demi ligne arrow Si oui quelle cartographie as-tu injecté ? Merci à toi

[@Motomillion]

We used the Arrow map.

[@glennmccall8809]

Hi Manny. Did you need to remove the lambda probe? I fit an arrow and an upmap and my engine check light wouldn't go off. Also did you remove the servo and just leave the cable there?

[@Motomillion]

Are you sure the map is installed? The servo was removed. Lambda probes are removed.

[@FastV4]

whats the difference between titanium vs full titanium slip ons?

[@Motomillion]

Weight.

[@grgygantz6760]

Why did you select Arrow over some of the others?

[@Motomillion]

Performance and high quality at an affordable price!

[@Iswhatitisssss]

Found my new favourite bike.

[@Ak2TheSky]

"so easy he say" 10mins plus later.. welps thts hard

[@icemanlol119]

Hi How many hrs did you spend on this install? My local dealer just quoted me 7 hrs for the install. Thanks

[@Motomillion]

It is only about a 2 hour job.

[@icemanlol119]

@@Motomillion thanks brother👍

[@davidfernandez8764]

Se pierde la garantia de la moto?

[@marcusjackson8964]

Mani what is your tool kit list!!

[@axobreil]

There are several Ducati Dealerships in Texas that have told me they will not install an exhaust on my V4 unless it is an Akrapovic and if I install another brand they will not service it. 🤦🏻‍♂️ any input please?

[@Motomillion]

Horrible to hear dealers playing games. It is absolutely unwarranted.

[@glennmccall8809]

Hey man. The akropvic are the preferred exhaust brand for ducati so they cover warranty etc.

[@minusx31]

You recommend baffles or no baffles?…

[@Motomillion]

It's personal preference on how loud you desire it to be. The baffles do not affect the power

[@GamesHappens]

⭐L I K E S ⭐

[@aemotorsports3]

What about the exup.. did y have any issues ?

[@Motomillion]

The exhaust valve is taken care of by the UpMap T800.

[@aemotorsports3]

@@Motomillion appreciate it

[@-motoegyptian2615]

I just did an installation video on my channel of the arrow exhaust for my v4 speciale. It sounds insane!!! I got from you and I'm in love with it

[@Motomillion]

Thank you! Just sent a shout out on your video for you!

[@-motoegyptian2615]

@@Motomillion thank you so much!

[@everythinggaming7938]

Is the muffler underneath not blowing hot air right at the rear tyre 😅

[@Motomillion]

It may look like it on the video, but the muffler is not nearly close to blowing anything towards the tire.

[@blacjosh766]

Does this work on the 2022 Ducati street fighter V4s? I just got the bike and am trying order!! I need this!!!

[@Motomillion]

Yes, it does work on the 2022 models as well.

[@RDUKA_13]

Nice

[@gruhnchris]

Did it come with the ecu mapping?

[@Motomillion]

You can get it here, just make sure the connector you choose is correct: www.motomillion.com/collections/ducati-streetfighter-v4/products/upmap-t800-ecu-flash-device-kit-for-ducati-streetfighter-v4-v4s

[@bobbychurmure2093]

Can fitted on ducati v4s

[@Motomillion]

Yes, we have this same exhaust for the V4S 👍

[@Motomillion]

Yes, it will fit the Ducati Panigale V4S as well.

[@Ramdas-r3n]

Broom Broom

[@Motomillion]

Sweep sweep.

[@TREXdudi]

You missed the spot on the left of the right pipe which is connected to the right side of the upper left side of the lower pipe. 😮😅😅

[@Motomillion]

Maybe it is not shown in the video, definitely nothing was missed.

[@Venom83.]

Надо сделать как у Panigale 2025, заднюю подвеску двухстороннюю. Никчему эти понты с односторонней консолью на дорогах общего пользования. ✌️🔥👍

[@minusx31]

My Ducati dealer same the computer will automatically detect a change and adjust so it doest need a up map to run properly…you hear anything like that?…

[@Motomillion]

You will need an upmap for sure, the servo motor is removed, and the bike will need proper mapping for it.

[@chris5k132]

Now that sounds mean

[@islam313bayan2]

How much price

[@lakin8r]

Am I only one that hates the fact that there’s two exhaust tips facing different random directions

[@Motomillion]

Equal length exhausts, in a V configuration that is mounted sideways ends up resulting in some asymmetrical looks. But, have you ever thought about the right side and the left side of the bike looking completely different on almost all sport bikes?