Installing the SC Project CR-T on a 2022 Ducati Streetfighter V4 SP

We install the CR-T exhaust from SC-Project on the 2022 Ducati Streetfighter V4 SP and take you along for the ride. This is a start to finish install of the CR-T Exhaust from SC-Project.
Power through the install to hear the exhaust note during the initial cold start, ride along, fly by, and the Stock vs SC-Project weigh in.
Shop MotovationUSA: www.motovation...
SC-Project CR-T for the 2022 Ducati Streetfighter V4 SP - Part Number D33-T69CR:
www.motovation...
Leave a LIKE if you enjoyed the video!
SUBSCRIBE ► / motovationusa
INSTAGRAM - / motovationusa
FACEBOOK - / motovationusa
TWITTER - / motovationusa
#v4exhaustinstall #scprojectv4exhaust #streetfighterv4sp #scproject #scprojectcrt #crt

[@yammienoob]

Leather strap on the back header! Smart, basically the same as what I did lol

[@MotovationUSA]

Was it though??? HAHA! I was struggling to figure out how to get better grip on the rear header.

[@fabiostefani4544]

Sound spettacolare next flyby video 2 👍💪🇮🇹

[@Venom83.]

Выглядит профессионально. С помощью набора выхлопных систем и карбоновых накладок можно менять внешний вид и стиль. 🤔👍

[@jacoboverby6800]

That hammering bit killed me 🤣

[@MotovationUSA]

🔨🔨🔨

[@ClutchFirst]

That thing is hell to get out. Took me a bit figure out a clever way of doing it without hammering it. That little hidden bracket was also tricky.

[@lukjno6345]

@@ClutchFirst how about heating it up first? Would that work better?

[@yourfavoriteaudience7460]

maybe it's rubber hummer,so it's find😂

[@HunterHonda]

What a system.. What a bike.. And Fernando is a stand up guy! Great video Nick. Motovation and SC Project is the way to go.

[@MotovationUSA]

Thanks HH! High praise coming from you man!

[@mrm.2540]

even with db killer its not too loud for ~100km distance?

[@jean-stephanethibault5561]

Which tune did you install? Just bought the CRT for My 20224 Streetfighter and looking at the different options for tuning. Thanks!

[@MotovationUSA]

The T800 Upmap is a solid solution for Ducati tuning. You may need to eliminate the servo with a Servo Buddy as well. With the T800 you will be able to select the SC-Project tune from their list and then upload that to the bike.

[@NagaunleashWoW]

When life throw you some obstacles get a rubber hammer 😂🤣😂

[@MotovationUSA]

After the full install, I rate this a two hammer job. 🔨🔨

[@NagaunleashWoW]

@@MotovationUSA 😂🤣👍👍

[@jahnjee]

Would this fit on a Panigale v4s?😮😮

[@smemo2011]

Oh my lord , it's amazing this sound ! I could hear all the f****g day long. Maybe best exhaust on this bike better thank akra ?

[@MotovationUSA]

We may be biased, but we think it is the best exhaust on the market, hands down.

[@LifewithAnnaBee]

Nicely done!

[@MotovationUSA]

Thank you! 🤘

[@GhifariSanta]

Nice Sound Exhaust 👍😊

[@MotovationUSA]

Glad you like it!

[@tta850]

Have SC Project CR-T on both my Aprilia (T660 and TV4) which are great, but that one looks like garbage! CS Racing on my Panigale V4 fits the bike much better in my opinion. Same with Arrow on my 959 Panigale… the underbelly exhausts just look the part so much more.

[@ancienttsar]

I would like to ask... what belly pan is being used? It perfectly hides all exposed bottom parts.

[@MotovationUSA]

It is the belly pan from Ilmberger Carbon. www.motovationusa.com/carbon-fiber-right-side-bellypan-by-ilmberger-carbon-ducati-streetfighterv4-VUR014SFV4

[@ancienttsar]

@@MotovationUSA thank you

[@ClutchFirst]

Nice job man! I’m a little jelly since you can still have your plates on. The bike looks and sound amazing. 😍

[@MotovationUSA]

Thanks! 😁 That dual undertail looks so good though!

[@KovertMecha]

Look at them weight savings

[@MotovationUSA]

14.1 lbs ain't no joke!

[@jimhanle2971]

Looks good but that is to loud . I’d go the dual exhaust set up .

[@MotovationUSA]

The CR-T is very loud for sure. The WSBK Dual CR-T system is not quite as loud. 👌

[@SNAPZ46]

Great bike but the Aprilia V4 just sounds better. Missed opportunity from Ducati imo

[@markholmes5695]

True but the aprilla looks like it’s stuck in the 80/90s aesthetically tbf! Missed opportunity from Aprilla imo

[@SNAPZ46]

@@markholmes5695 80/90? lol get your eyes checked.

[@ittybitbobo7657]

Toooooooo loud

[@MotovationUSA]

The sound rating is 115 dB @ 6375 rpm.

[@lukjno6345]

With picks of 130dB 🤤🤤🤤🤤

[@lukjno6345]

It's never too loud 😎

[@MotovationUSA]

That's why they invented ear plugs 🦾

[@RadDadisRad]

Just loud enough. Loud pipes save lives.

[@Surfer_Jay]

That bike sounds really pissed off! ♥

[@MotovationUSA]

100%! The bike sounds great with the CR-T on it.

[@aaronliang4699]

is that belly pan from Ilmberger Carbon?

[@MotovationUSA]

It is indeed!

[@NobleBok]

What brand makes the bellypan that extends further back, covering the oil pan?

[@nemesiszen8844]

Which exhaust to install in my street fighter v4 to make it spit flames?? Plz help me out its a 2022 model

[@Farhan.DucatiS1k]

what kind of HP and Torque Gains do you get from this system compared to the Akrapovic?

[@mccoy6772]

Would be pretty sweet if my system would show up!! I was told 60 days till mine gets shipped. Fml 😠😠

[@No_S3rvice]

I have the dual CRT cans on my V4S. It's loud.💨

[@motorjack141]

That's a good sound on the streetfighter. Didn't know sc has a single for this, how much difference is it in sound to the dual?

[@MotovationUSA]

Hey motorjack141! SC offers the CR-T and the S1 for the Streetfighter V4. Both sound very similar in overall tone. The S1 offers a tiny bit more volume 116 dB vs 115 dB. The dual exhaust with fit the Streetfighter but you will have to figure out how to hang the license plate.

[@brandonxu1262]

Stock mirrors are don't match with this cool bike, change to Rizoma mirrors

[@MotovationUSA]

Totally agree with you! Which ones do you think we should put on there? Stealth or Cut Edge?

[@brandonxu1262]

@@MotovationUSA My opinion, for the stylish and design, Stealth. If for practical, Cut Edge bar end will be better. I personally prefer Stealth lol..

[@MotovationUSA]

Primo Choice! The Stealth mirrors are very sleek! Fit and finish is also top tier.

[@rossocorsa8745]

amazing SC+SFV4S

[@MotovationUSA]

We couldn't agree more!!!

[@polishnightmare]

I love it. But how is that even a muffler. :)

[@rossocorsa8745]

holy~!

[@MotovationUSA]

No messing around out here!

[@edgongar]

Great video Nico!!! I have a question: I had the 2019 Panigale V4 and I installed the Twin CRT SC Project exhaust. I was in love with its dual appearance and sound, but I sold the motorcycle with the exhaust included because I wasn't sure if that exhaust was compatible with the 2022 model... now I have the panigale v4 2022 and I would like to reinstall the same Twin CRT or the Full Titanium Exhaust System 4-2 S1 GP silencers... Do you think that these 2 exhaust models are compatible with the 2022 model? On the official SC Project page they are not available for the 2022 models, only up to the 2021 model. II hope you can help me to solve this doubt... regards from México!!!

[@MotovationUSA]

Thanks! Officially, SC has not announced any cross fitment on the 2022 Panigale models so I cannot say that it will easily install to the new bikes. Unofficially, where there is a will, there is a way. Sorry I cannot help further.

[@pedroaguilar1481]

I am sure is compatible with the Panigale, I also want to install in on my 2022.

[@helgejohan3604]

Too loud😩termi sounds deepwr and better✊🔥🔥

[@lukjno6345]

Termignoni is crap.

[@sabatantoniogrimaldi6806]

hi, I intend to buy the same exhaust for the ducati street fighter v4 s 2023/24, did you carry out the carburetion on the bench after you mounted it?? or is it just the exhaust?? Also, is the air filter original??? I await your news so I can be sure of your purchase. also could you tell me what year the bike is??

[@MotovationUSA]

Any time you are augmenting the intake or exhaust on a motorcycle, you should address the ECU. When deleting the flapper or removing the cat, you will often see a check engine light if you do not. We suggest the Sprint air filter. As in the title of the video, it is a 2022 Ducati Streetfighter V4 SP.

[@sabatantoniogrimaldi6806]

so you don't know if it can fit on a 2023/24 SC, he still hasn't given me confirmation..

[@MotovationUSA]

According to my research the factory exhausts are the same part numbers, but I would urge you to reach out to your dealership to confirm that the exhausts are the same from year to year.

[@ptrtng6307]

SC the best ✊💨💨💨

[@veronicaisl]

Do you need to tune the bike? Mapping? Thanks

[@MotovationUSA]

Its generally good to do some ECU tuning on any modern motorcycle that you augment the intake or exhaust system. If you are removing the cat, the exhaust pressures are drastically changed. Slip-on exhausts are not augmenting the pressures quite as much. For Ducatis, we have had great luck with the T800 Upmaps. Otherwise, we like the Rapidbike Evo tuning solution.

[@Superbikehub92]

SC Project All Day ❤

[@MotovationUSA]

We couldn't agree more!

[@toshy]

Can you please tell us what bellypan is that? Does the texture matches the DP parts? Thanks!

[@MotovationUSA]

Hey Arty! This is the Ilmberger Belly Pan. Check it out on the site: Right Side: www.motovationusa.com/carbon-fiber-right-side-bellypan-by-ilmberger-carbon-ducati-streetfighterv4-VUR014SFV4 Left Side: www.motovationusa.com/carbon-fiber-left-side-bellypan-by-ilmberger-carbon-VUL013SFV4-streetfighterv4

[@toshy]

@@MotovationUSA Thanks, but what's shown in the video looks like one piece, that's what got me confused. Is the Ilmberger belly pan actually two pieces that stick together? Are there any clearance issues with the oil sump guard or the Akrapovic homologated exhaust? Thanks!

[@lukjno6345]

Did you need to remap using xecu as they suggest? Or not necessarily?

[@MotovationUSA]

Any time you are changing the intake or exhaust on a modern motorcycle, you should address the ECU mapping.

[@lukjno6345]

​@@MotovationUSA did you use xecu?

[@lunabull]

Hello, Is it necessary to keep the gaskets of the serial manifolds when installing the Sc-Project? Without them I see the union between serial collectors and Sc-porject collectors, with fixed and not well fixed to each other, thanks for the answer

[@MotovationUSA]

If I am understanding your question correctly: The unions between pipe sections are slip-fit with enough directional overlap (with the flow of exhaust gasses) to limit any sort of exhaust gas leakage. Springs are used to keep constant pressure ensuring proper fitment. Make sure to add a thin film of anti-seize to ensure easy installation and break down.

[@lunabull]

I am referring to the union between OEM exhaust manifolds and SC-Project exhaust manifolds, I see that connection as not very reliable. When removing the OEM exhaust it came with two gaskets that made it fit perfectly. I like loud bikes but with the SC-Project the Streetfighter v4s is unbearable 😂 I have installed a db-killer on the exhaust manifolds and it still sounds like nothing is installed.

[@lukjno6345]

​@@lunabullthis exhaust doesn't come with a db killer.... Maybe you're talking about another Sc project model?

[@lunabull]

@lukjno6345 the db-killer is handmade.

[@MrMiatze]

which belly pan is this?

[@MotovationUSA]

It's the Ilmberger belly pan. You will need to LEFT & RIGHT sides. Right: www.motovationusa.com/shop-all/carbon-fiber-right-side-bellypan-by-ilmberger-carbon-ducati-streetfighterv4-VUR014SFV4 Left: www.motovationusa.com/shop-all/carbon-fiber-left-side-bellypan-by-ilmberger-carbon-VUL013SFV4-streetfighterv4

[@de76]

Did it end up showing code? Or did you tune it out or servo buddy?

[@MotovationUSA]

Upmap T800 for the win.

[@reiniermoto6312]

Whats the T800?

[@ruimteschipYT]

Toooo good 😊 love it

[@MotovationUSA]

Glad you like it! I know we love it!

[@mrgreen6599]

I love the video

[@MotovationUSA]

And we love you!

[@erg0101]

Sounds mean! 😎

[@MotovationUSA]

The video almost does it justice.

[@AnkitPatel-fe7sy]

Good God that is loud.

[@MotovationUSA]

It's not quiet that's for sure.

[@Eli-fu9mr]

Beautiful detailed video. Fernando will be happy!!

[@MotovationUSA]

We hope so!

[@johnmackey7721]

Nice video. That exhaust though is just ok. The short can is ugly and the sound isn’t that special. I’ve heard the Panigale GP-2 SC exhaust will fit on the Streetfighter. Now that’s an exceptional exhaust.

[@MotovationUSA]

And that is why SC makes more than 1 exhaust option. Different flavors for different tastes.