DIY Supermoto Fender - Cutting My Own! [Supermoto Build Part 11]

PREV LIFE VLOG! - • WE DID IT!! 15,000 FOO...
Welcome to my Supermoto Build Series! In this series, I will be showing you the entire process of making a dirt bike street legal and converting it to a supermoto. This is being done on my 2015 Honda CRF450R. I'll cover parts needed, requirements, a little bit of installation how-to, but most of all, having fun showing you the choices I make to build a super cool custom supermoto!
In this video (Part 11), we get to wrapping up some of the lose ends of things to be completed on the build. That's really all that's left. There aren't any big major things that need to be completed, but there's still a lot of little things to do. The front sprocket and chain needed to go own and we wanted to check how the alignment would be with the wide 5" Marchesini wheel and 160/60 tire. It's actually not that bad! I think with the chain block I ordered it should be good without any spacers!
The main time waster this week was removing the bolt that broke in Part 9. The one for the stator cover. That proved to be an issue and we needed to make a store run to get a stronger drill bit. The extractor bit I had was great though and after much longer than we would have liked, we got the bolt out!
After some work on the Trail Tech Vapor kit, I finished up my custom DIY supermoto fender. This is a great way to save some money and I actually prefer this over a pre-molded supermoto fender. It's unique since nearly everybody just buys an aftermarket fender, it looks more made for the bike, and it it's pretty easy to do and allows you to cut it exactly how you want! All you need is a Dremel tool and some tape!
Dremel Tool - amzn.to/2aJkcDs
Enjoy the video/series or find it useful? Hit that like button, subscribe if you aren't already, and share it with your friends! It helps me and the channel out a lot :) Thanks!
Sub to my build assistants!
/ fryriding
/ dtcevo
Parts in this video:
Stator Kit - amzn.to/29oJzf4
Full Stator Kit - bit.ly/29hssZ2
Speedometer/Tach bit.ly/29hriwy
Speedometer Mount bit.ly/299Er8W
Wheels www.tawperforma...
Front Sprocket bit.ly/29ja03y
Front Tire bit.ly/29bOlaf
Rear Tire bit.ly/29bOoDd
Plastics kit bit.ly/29EXCZW
Chain amzn.to/299FghG
Brake Kit - bit.ly/29bQ13E
PLAYLIST - • CONVERTING A DIRT BIKE...
PART 1 - • CONVERTING A DIRT BIKE...
PART 2 - • Best Dirt Bike Seat [S...
PART 3 - • Powdercoating a MOTORC...
PART 4 - • REBUILDING A DIRT BIKE...
PART 5 - • How Much Does My Super...
PART 6 - • We messed up... [Super...
PART 7 - • IT LOOKS LIKE A BIKE! ...
PART 8 - • LED BAR HEADLIGHT on a...
PART 9 - • I BROKE IT!! [Supermot...
PART 10 - • SUPERMOTO WHEELS on a ...
PART 11 - You're watching it!
MOTONOSITY MERCH:
Shirts - bit.ly/1YsAAIg
Keytags - bit.ly/1pdJEFk
Stickers - bit.ly/1Tq6Tbo
Res Covers - bit.ly/1Sxlzo4
MY STREET GEAR:
Helmet - bit.ly/ShoeiRF1200
Gloves - bit.ly/1nugLTy
Jacket - bit.ly/AStarsTGPR
Boots - bit.ly/29uGAjs
MY DIRT GEAR:
Helmet - bit.ly/1rCOqNH
Armor - bit.ly/1YsGMzW
Pants - bit.ly/1Tqb6Ml
MY EQUIPMENT:
Phone Mount - amzn.to/1X0nl2x
Bluetooth headset - amzn.to/1lLT8EB
Helmet Camera - amzn.to/1M4Yfat
Microphone - amzn.to/1rdL8Zt
Baby Vlog Camera - amzn.to/1KPDKSY
Big Boy Vlog Camera - amzn.to/1YsIwJv
Lens for Camera - amzn.to/1Y7cWm1
Drone - amzn.to/29i1Www
FOLLOW ME!
Instagram - / motonosity
Twitter - / motonosity
Facebook - / motonosity
Twitch - / xnosity
Snapchat - brentklauck
My Other channels:
Daily Vlogs - / xnosity
Fitness - / fitnosity
Want to Support me? - / motonosity
Mail - PO Box 2032, Cedar Park, TX 78630

[@BLDH]

front fender looks awesome! good job!

[@jenstornqvist8351]

DU ÄR ÖVERALLT MUCH LOVE

[@rasmusivarsson1469]

BLDH legendar!!

[@bul34]

:DD

[@greenrolaids]

i like how the music is 50x louder then the voices.. thanks for blowing out my speakers

[@motonosity]

Sorry about that. It didn't play that way when I was editing.

[@ap1986]

while we are talking about music. What song is that?

[@allenhenry1113]

wow u got really lucky on that bolt. gald that it worked. we are just bought my wife a buell blast that needs some work. its really fun working on bikes! we need more clips like yours to inspire others to work on there own bikes. the more you do the work yourself the more you will know whats wrong if anything does go south. great Clips Thank you.

[@justinrstone]

I was so glad when you put tape on the fender to use as a guide when cutting it. The OCD side of me was about to go mental.

[@klaach2]

Was waiting all day for this video so I could watch it before work!

[@algot2009]

finally someone who can actually cut a fender nice!

[@motonosity]

+algot2009 haha thanks bro

[@mrwetbutt]

how is he so understanding when it seems that nobody can adequately send him the parts he needs? like everything hes ordered theyve messed it up somehow..........motonosity has the patience of a saint.......

[@xXepicXx54]

This is true

[@cateatsushi3008]

This is very real

[@TW0TIRES]

Maybe he freaks out and throws a bunch of stuff and makes a nasty phone call.....all off camera....lol

[@Superhueman]

I was gonna say the same thing. Glad you did!

[@qx4n9e1xp]

He does angry push-ups. The most productive anger-relief tactic.

[@VroomVroomDana]

Ohh wow that fender turned out great.

[@Belicose777]

I had the Same issue. Bought a reverse drill bit so I wouldn't drive the bolt deeper with tapping the bolt with a regular bit. It's always scary when crap like this happens. Glad you guys got it out. Can't wait to see you rip it up with this thing.

[@doomslayer9021]

Love that fender. Can't wait to see you drive it.

[@rz23moto25]

That joint looks sweet!! Got me wanting me to build a supermoto haha. Keep up the dope work!! Cant wait to see the final product

[@1986Honda4trax]

The fender is AWESOME how it is👍

[@MrSyltburken]

Front fender and the rest of the bike looks great man!

[@kristianolsen6095]

That fender looks sick! Love it

[@SpecialKMotovlogs]

That front fender looks awesome!!! 👌

[@ThisLifeRiding]

Nice man. Great video. Can't wait for the next series to begin.

[@Tiqerboy]

Fry Riding has all the mechanical prowess, Motonosity is there to look good ? Seriously, good job. I also like the background music you've chosen for this video.

[@Daniel-dj7fh]

the front fender looks real nice!!!! :D

[@PURP_PLAYS]

seriously enjoying this build. im going to be sad when this is over.

[@FryRiding]

Don't worry, Fry will fix it

[@motonosity]

+FryRiding You're the hero we need.

[@bsm_e9217]

+Motonosity he's the hero you deserve

[@breezyy777]

+Motonosity and you are the hero that i have... much love man ;)

[@CCJG028]

When you use a drywall drill bit on metal. That was my fave part lol

[@modedchild]

same

[@shadetreesurgeon]

That front fender came looking great! If I had been attempting that i wouldve probably worked down either side trying to make it even till i had a spike for a front fender LOL

[@MotoErgoSum]

Having the right tools for the job makes all the difference. FYI, you can keep metal shavings out of the engine case by covering all holes with blue painter's tape. Just hit the area with a vacuum or compressed air before removing the tape.

[@motomania2902]

Front guard looks good, keep up the good work 👌

[@ngatupuna3316]

why do i find this build so entertaining.

[@tmill6880]

I hate Sunday but since this series I look forward to them dude😂

[@cavediverjc]

Fender looks really good.

[@landon1533]

fender looks great man keep up the good work

[@blublack]

If you ever find yourself needing to drill through another bolt or hardened steel, what works really well is a masonry bit with the cutting tips sharpened. Used it to drill through a clutch fork pin where titanium bits failed.

[@jaydenasher99]

Man...that's looking absolutely amazing!!!! Video length was really good as well. Keep it up sir!!!

[@motonosity]

+Jayden Asher Glad you enjoyed it man :)

[@volteemore6260]

This moto looks awesome already. Can't wait to see it on the road

[@GeezyX]

damn that looks clean. gotta try that myself

[@BeRADMoto]

even if it doesn't hit the tire while on the stand, it'll definitely rub when you ride it. Like I said, just make sure it doesn't hit the rim when you ride it!! (: Lookin' good!

[@mtg8597]

This looks beautiful. I wanna do this build one day

[@FPSPushers]

I think that front fender looks great for being a hand made job id round out the edges a bit more to make it more flush but all in all looks great man!

[@FPSPushers]

Also where would I go to check out the bikes you guys are selling?

[@blvckplays8971]

Haven’t seen the rest of the series, and it was a while ago but I was going to suggest, you should have buffed those fender edges heaps to really shine up the cut and sanding, will be less prone to dirt/grime discolouration over time... bike looks amazing bud

[@speedshift5792]

looking great bro can't wait till she's on the road thumbs up

[@johanpersson8349]

YES supermoto Sunday build baaaabyy

[@TMB3BB]

Fender looks awesome

[@HELacey]

Called EZ out's, and you're very fortunate it worked as well as it did for you. I've never had much luck with those things, always end up welding on to the broken end of the bolt and using a set of visegrips to twist it out, but I'm assuming you don't have a tig welder at your disposal! Looks good man!!

[@the_american3037]

I recommend picking up a easy out set. have used mine countless times getting broken bolts out

[@AcesLSRP]

love the series motonsity, definitely learned a lot fryriding always makes these videos hilarious, thank you fry for the constant entertainment :D

[@mixxmoto2392]

I would leave the front fender, it looks sick, good job man

[@jesteris25]

Mr Fry must make life interesting for you. Getting closer I'm excited good job on the front fender, bolt extraction and chain fit. I personally never had a bolt come out with an easy out i have given up trying. Was that Mr Evo in the back ground too? well best of luck ride safe love from Australia for you and your wife

[@stephanobax8196]

cant wait to see your bike on the road

[@jacobgriese527]

"Sometimes I also put my head between my knees and rock back in forth, that's also how I roll" - Fryriding 😂😂😂

[@Lucadibbets]

i've been waiting for it too!! such a treat these build logs :)

[@pabeefboys5746]

I think that you did a great job on the fender for the crf:)

[@buckeye_moto7414]

"Put it in, hammered it. That was satisfying" Hahahahaha. Another nice video fellas

[@TheZumiezNation]

17 minutes? Motonosity i love you!

[@shiftdown5up741]

Fender looks great man!!

[@BM318i]

Same thing happened to me with a crankcase bolt a few weeks ago, If it happens again its worth trying a sharp chisel or punch and hammering near the outside edge of the remaining bolt in an anti-clockwise direction, if that makes sense. Usually once the bolt snaps its not actually that tight in the hole. Also worth mentioning that I'd normally never use a torque wrench for small stuff like that, the one time I did use it, waiting for the click, waiting for the click, snap..............

[@Dropbackdurbin_ocs]

love that fender

[@subishadow]

looks good. can't wait to see it done.

[@johnanthonymoto5759]

Nice work on the build! Keep up the awesome build vids!

[@Germaingazm]

Nice cut on the fender! looks clean af

[@motonosity]

+Germaingazm thanks bro!

[@jasondaniel3534]

Damn thought it would be rolling by now i guess it's ok i know your ready to rode it more than we are to see you ride good luck brother good series wish more people would do this

[@Jay_olsen]

hey! im most the way through my build, its a wr and the whole build process is actually killing me haha! these videos are helping me through bits and pieces so thank you very much! at 9:09 fry talks about that temp sender, i was just wondering if you could tell me what its called or send a link over i would be very appreciative! sorry if have already posted it a bunch of times.. cheers mate!

[@zackabilly33]

Tip for next time you snap off a bolt like you did , take your blue painters tape and tape off the flat surface of your parts as so you don't get any shavings inside , build looks awesome !!

[@ginodejesus9302]

Hey Brent good job on the fender cut I do a lot of that stuff and if you really wanted to finish it off take some rim tape red or whatever color u think would look good and place it over your cut that way edging is all the same and it gives it more of a factory look. If you want just an idea you did a good job anyways.👍🏻

[@moto.cheetah]

PLEASE do a stunt clutch / easy clutch review. I love your videos

[@daviper3892]

front fender is awesome dude

[@onthethrottle9230]

fender looks sweet

[@planedriver5637]

i love how moto replys. most other youtubers neverreply

[@ohhsoonumyy]

Very cool custom fender

[@ShemoStudios]

that jeep tho. you sir are a god.

[@kr0v3k]

I am straight up laughing my ass off from what fry said about the 2 rolling things lol

[@minibikemayhem9335]

Love the bike and the build! Fry's jokes always make me laugh!

[@motonosity]

Thanks bro!

[@garagism5736]

Cant wait to see it on the road

[@f1fanatic498]

Hey get an inch-pound torque wrench for those 8mm bolts. On my 2015 CRF250R I did the same thing in the same spot. Never use a foot-pound for anything less than a 10mm as it will easily break the bolts. Or you can always tight them down with a socket wrench as much as possible ;). Good luck!

[@blakewilliams1595]

He's growing the beard back boys

[@iMarsiTV]

You cut that fender perfect

[@NukaMoto]

Fender looks amazing man, keep it like this :)

[@3kawis]

dam front fender came out sick asf! looks oem lol

[@brickyfb6179]

cant wait for the finish

[@hugocharneca7651]

Fender looks sick man!

[@motonosity]

+Hugo Charneca Thanks man!

[@dakotaharrell1055]

I've never refreshed my yt feed so many times before

[@motonosity]

haha sorry dude!

[@matthewslessman2585]

250 k Subscribers soon . congrats

[@1986Honda4trax]

I also love the red

[@PublicNuisance304]

My rule of thumb for gaskets; once it has been compressed and engine has been ran/ gotten hot, use a new one. Hope you did. Awesome looking bike.

[@Mau5kidder]

Will you be making an all electrical video describing where/how all of the wires connect and how they work together?

[@saint12347]

new to the channel.. first I'd like to thank you for keeping me up all night. I just watched all 10 videos, I'm not gonna lie I got pretty bummed when I saw that screw break.. what I always do is take the cutting wheel on my drimmel and cut a line into the screw and use a flathead to take it out. it may be a little tuff someone times but you could use a impact driver and a hammer to get it out. also what are you asking for your Yami?

[@thekrantz123]

Finallyyyy! Please have more euro-Time friendly uploads!

[@incognito8219]

Nice fender job dude

[@rene.tarasovic]

waiting so long for this vid, finally

[@Basilthesillything]

On the front fender you should of used a belt sander from harbor fright ! It's so much easier and gives it a cleaner look.. I use a belt sander to shave down plastic and metal also easier to debut...

[@RideOrQuit]

Great job on the front fender ;)

[@evanhasson6032]

I feel like Fry is the Steven Hawking of building bikes.

[@thereal_FASTA]

Fender looks great!#keepumcoming#supermoto

[@gokussj3882]

Damn bro nice tan! And fender!

[@aoplinger622]

I hate supermoto front fenders but this actually looks awesome! Good job man!

[@ScrimbloTheSquid]

moto looks like he got a spray tan lol =D and the bike is looking great so jelly

[@motonosity]

+bill Smith Yeah youtube did something weird lol. I did spend a week at the beach though.

[@ScrimbloTheSquid]

same i live in florida on the gulf so nice

[@ashoo.a]

Heyy Sir Amazing fender..looks wicked as bee..the rear will help keep your engine part of the bike clean after the first run from rains..kudos..thumbs up.))

[@JackMaddren]

LOVE THIS SERIES!!!!!

[@isaiahkane9282]

Been watching every build video. Can't wait for this bad bitch to fire up

[@DM-yi1ur]

Me too Bro

[@ismackherbiehind]

Powder coating the engine mounts would of been dope

[@River739]

Looks so good man. Hopefully once it's done you'll be able to pull better wheelies than Jake;)

[@huskyberg4311]

Its going to be a Brutal bike!

[@nickcsuki8123]

Great series!

[@xtina818]

heat gun will round out those fender corners nicely.