Motor Controls - Wiring a 3 phase motor with 480 volts

[@edriusputman3198]

BOY!! Teach the standards for Safety!! 💯💪🏾

[@NanaSewaa]

Thank you for your video it’s helpful to me and my lab partner.

[@CommercialGasEngineerVideos]

I've not used nor seen those electric connectors in the UK. Thanks for sharing. Keep up the good work

[@Avaddon911]

Your equivalent is a wago

[@joseph_8486]

Bro had one job and didn’t follow the diagram. I’m fucking dying laughing lol

[@jamelectro962]

He corrected it, right? I don't see how that is funny. Smh

[@eomerofrohan4399]

I really enjoyed the video. Thank you so much. This was really confusing me.

[@gustav9911]

Great video

[@Mikesfilmss]

Thank you!

[@georgegould667]

Are you going to talk about delta & y connections of polyphase motors ?

[@elgato1366]

I came across a machine with a 120v.motor that was controlled by levers that made it go back and forth, and the wires that came out from it were those same colors.?? Is that motor special ??

[@Mikesfilmss]

How to Wire a Drum Switch to a 6 lead Motor to Build a Reversing Circuit. kzbin.info/www/bejne/gGWoaHyPhqmDZ6M

[@Mikesfilmss]

Sorry this took me so long. I’m going to do a 9 lead motor this week and use a different style of drum switch in a few weeks to wire the same motors. Hope this helps.

[@bobbygonzon5428]

Is it better to heat shrink your connections or tape them?

[@Mikesfilmss]

Definitely a personal preference but I would say shrinking them is better but is it definitely less common and makes it harder to take apart.

[@ourvaneatus6526]

Did I missing the part on Rotation?

[@eliassaunders6417]

So helpful, appreciate you!

[@ChurchillAshuTambe]

Thanks

[@Mikesfilmss]

No problem! Glad this helped!

[@Red_Nokia_edits]

I thought lines 1-3 are brown orange yellow? (BOY).

[@Mikesfilmss]

The purpose of the lab is to teach students how to wire based off of a wiring diagram. I have heard the terminology you are suggesting but every motor we buy seems to have different colored wires so we thought teach the diagram would be the best

[@davidgk2005]

So are both 1, 2, 3 and T1 T2 T3 labeled as such? I would have separated 1,2,3. Connected 4&7, 5&8, 6&9, then connected 1&T1 2&T2, 3$T3. In this video it is as if they separated T1 T2 T3 to connect with 123 coming in, but how do we know which ones are 1,2,3 if there is not a standardized inbound color scheme

[@ericholder3856]

123 coming in does not matter in 480 you have 3 legs off hot and 1 green ground as long as everything from the box is wired the same

[@mitchellrisner9104]

So helpful! THANK YOU

[@JorgeTorres-gv6hm]

Why it say blue 1, white2 and orange 3 are they a different voltage?

[@uberdash007]

Quick question I have a commercial dough mixer, which plate label reads 5 amp 3 ph 480v... what AWG romex or cable could I use ?

[@CatnamedMittens]

You'll need like 16 gauge lol. 3 hots and a ground.

[@ajlajl2992]

Question ❓ 460V 60HZ motor 6 wires T1-T6. 1,2,3 connect to power coming in , T4,T5,T6. WHERE DO THEY CONNECT TO?? IM A DELTA OR Y CONFIGURATION??

[@Noah-o1y7s]

black goes with red on the diagram but you put it with blue? im genuinely confused someone please help here

[@Mikesfilmss]

You’re right. That is confusing. I had to watch it to see what you were talking about. Black should have gone to red as per this wiring diagram. I reshot this video multiple times trying to do it faster and I must have messed up. I'm sorry and I'll remake this video in the future.

[@robbiee.6921]

Wait so what happened to brown , orange yellow for 480

[@mohammedsamara4360]

Why did you connect black to blue?

[@johnficcadenti414]

Your colors do not match hi voltage? Please explain?

[@Mikesfilmss]

Where I’ve worked they haven’t had standard wire colors.

[@boybravo689]

I think that is a high voltage wye configuration with a 9 leads out motor sir

[@AliyiMama-sy5xb]

Good

[@kennydieu2694]

Thanks for sharing

[@bomaberiou5504]

👍🏽

[@Noah-o1y7s]

beyond confused on how you know which wires to connected to your line voltage wires your just grabbing wires saying it really doesnt matter like what do you even mean

[@Mikesfilmss]

Line 1, 2, and 3 all have the same power because it's 3 phase. So it doesn't make which line you use. Unless the rotation is incorrect.

[@brianberson4169]

I usually go boy. Brn orange yellow. But some colors can change but each one is just one phase of three phase.

[@ogbonnachizaram8293]

electrical drawing symbols

[@muthatrucka76]

😅This is terrible...Using colors...ok..ok..ok ..and not explaining or testing continuity and wether series or parallels..Nonsense

[@jackgraff420]

I can't believe you're teaching people and you used wire nuts and that tape job. This will cause I motor to burn up in no time or at least cause a ground fault. You should be crimping your wires together, then wrap with varnished cambric tape, rubber tape, and then electrical tape

[@jackgraff420]

kzbin.info/www/bejne/qZ_XmH5siLyMqas here

[@lampoyo]

Maybe one in a hundred, under intense heat and vibration, would fail. You speak as if 100% of motors wired this way will fail, which is incorrect. He could run that motor, with this wiring, in this environment, through your lifetime and it will never fail. Erase your first two sentences and you will reach a larger audience. I agree with your last sentence, completely.

[@jackgraff420]

@@lampoyo I work in a slaughter house where everything is vibrating and everything gets hosed down every night. Every motor would fail quickly if it wasn't wired properly

[@MrSims-ky2ne]

​@Jack Graff large airports run 10,000+ 3 phase motors and vfds all are simply wire nuts and tape. They run between 16-20hrs per day. Vibration like crazy

[@raybees72]

If you wired a motor like that at any place I have worked, you'd be fired.

[@corbinking11]

Thats how we do ours lol

[@paranormallettuce7227]

Different places have different company wide standards that would get you fired anywhere else

[@Mikesfilmss]

I`m interested to hear why?

[@raybees72]

@@Mikesfilmss Because wire nuts suck for wiring motors, and your tape job on the leads sucks.

[@lampoyo]

Any place I've worked, we teach people how to do things better and move forward together. Good luck having that gun to your dome all the time

[@joseayala2316]

Question....T2, is a neutral?