MOTOR PROTECTION|PROTECTION OF INDUCTION MOTOR|ELECTRICAL TECHNOLOGY AND INDUSTRIAL PRACTICE

[@owinookello9358]

this guy big up so nice in explaining detailed thanks sir make video on protection relay testing

[@happybear3110]

Thankyou very much, so helpful for struggling students. You litterally save my grades, big thankyou..

[@technologyatease1642]

very impressive it helps us a lot in doing the above practically in the Gulf.

[@surendrakverma555]

Very good. Thanks 🙏🙏🙏🙏🙏

[@rengaramanujan]

Very crisp and clear,, good u have good knowledge keep improving...

[@made2automate]

Very Informative Video:)

[@shilpdhande4340]

Great video.

[@govindgurjar-js5et]

Your vdo are superb 👌👌👌

[@VV_Live]

Thanks for information will you please make a video on the calculation of the motor protection.

[@govindgurjar-js5et]

Plz make vdo on motor protection of ht motor with under voltage over voltage, differential protection & also its related relay like abb spam spaj spau type with practical

[@vamsikrishna5391]

Sir u said under voltage relay-27 draws more current so over current relay is enough no y we r using another relay for it.

[@electricaltechnologyandind5335]

Not over current but overload relay. Those are not same. Now coming to your questions. Suppose a motor van be loaded to maximum 80% of its rating. Now during some time it is running at 50% load. It happens often in plant. Now in that time if the voltage falls then there won't be significant overload. But under voltage... That is why separate relay is considered

[@vamsikrishna5391]

@@electricaltechnologyandind5335 if i understood correctly if we keep overload realy even though in under voltages also our system will not damage but only it's steady state performance will be Afftected.

[@electricaltechnologyandind5335]

Yes

[@tahirajmeri7073]

Nice explanation...

[@annamalainarayanan1219]

Easy to understand pls make video for generator and transformer protection same way of explanation

[@Dharanextreme]

Thanks alot for teaching me about sef

[@aliamoor1541]

thank you very much for all your efforts and we need more deitailed about any protection of induction motor and how to calculate and setting

[@venkatagangadharperuru1766]

Thank you so much ... Can you make vedio REM601 motor protection relay and it's fuctions.

[@monubharti7978]

Diff between 50L/R and 50 relay?

[@amarsrivastav1167]

Nice video sir .. What is use of negative sequence protection in motor

[@CartoonwonderlandEdu]

Thank u very much. your vedio is very much understandable. Can u make a vedio on motor and transformer protection setting calculation.

[@electricaltechnologyandind5335]

I have already uploaded a video on transformer relay co ordination setting. That covers majority of trafo protection.. ref protection setting is already uploaded. Remaining protection is differential, which I shall upload later... I have plant to upload all protection settings. Please stay tuned, and share my videos

[@amitraj9572]

Instrument type earth fault protection ke bare mein btayein?? How dc current function in that??

[@mt4526]

Very nice explanation. Can you please explain HV motor differential relay connected and the source side power cable circuit. What will the consequence in the differential CT (87)

[@stepiankalunga752]

Please I need a video on how to come up with motor control circuit

[@mahadevan8432]

Super sir

[@papaiarunava]

Can you please make a tutorial on ecs system

[@alem3049]

exellent work thanx bro

[@gauravchaudhari8393]

Pump well vfd maintaince and motor maintenance one video on that topic

[@mohammadsufiyan1365]

It's an very knowledgeable . My request to you that please take a one example of settings acording to motor name plate....

[@electricaltechnologyandind5335]

Yes, i have plan for making such video. I have already uploaded setting example for over current and earth fault protection. You can check that. Give me some time. I will upload entire protection system

[@himanshu2232]

Thanks फ़ॉर nice vedio sir transformer प्रोटेक्शन पर भी एक vedio बनाये।

[@خالدالشلبي-د4س]

Thank you . But what about the differential relay 87 M .one CT before motor and the other after motor where install it

[@electricaltechnologyandind5335]

At motor terminal box. The other one at switchgear panel

[@خالدالشلبي-د4س]

@@electricaltechnologyandind5335 thank you very much

[@M-Kay-Freak]

Please make videos on Vaccum circuit breakers for HT motors and their protection

[@arijitbhowmick1114]

Can you please explain it with a motor example how the different protection setting are done.

[@electricaltechnologyandind5335]

See my latest video. You will get some idea.

[@anuragrawat1866]

Can you explain the zero sequence ,positive sequence and negative sequence in context to synchronous machine

[@ardhaardhanari9898]

Appreciate your video. Can you cover transfo,generator, line differential protection also

[@lingaduraialagiah9087]

Good Video

[@aslambaig6469]

please share Generator protection and excitation Vedio also

[@umamaheshchilaka]

Please make a video on "Motor protection relay Settings"...i.e., what should be the values to be set?

[@arijitbhowmick1114]

Kindly upload some video on generator excitation and on AVR

[@ranjan1436]

Please explain, how many relays can be connected through one CT, are all connected on the same core, each relay has different application so how are they done?.

[@electricaltechnologyandind5335]

Actually modern day numerical relays take current input from one core, and analyze for different application. Only differential protection is connected through ps class CT

[@ranjan1436]

@@electricaltechnologyandind5335 Thanks

[@soumya2221]

Pls explain motor hot and cold curve

[@mohammadsufiyan1365]

Please upload the protection relay settings of LT induction motor beyond 70 KW

[@electricaltechnologyandind5335]

these motors are protected as per type 2 co ordination. basically it has mccb, with on off contactor and a bimetallic thermal over load relay. mccb gives Protection against sc and e/f fault, bimetallic o/l relay gives Protection against over load. contactor is used for on off the motor... ratings of these are dependent upon the motor rating and it is available in type 2 co ordination chart. you can find it on internet. manufacturer gives the chart

[@suryasreedharreddy2277]

Explain about fault current limitation by using series transformer

[@electricaltechnologyandind5335]

There is a video.. purpose of lighting transformer

[@gimplex]

Nice explanation kindly make videos on testing of electrical equipments like routine,type and site acceptance tests of (cable,transformer,generator,motors,switchgear mv,lv,hv)

[@electricaltechnologyandind5335]

to be very honest i am professionally a design engineer. so i don't have any exposure on testing. however i shall try to collect data so that i can make video....

[@rajibdhar3703]

it can also occur problem during its start how to solve its problem

[@electricaltechnologyandind5335]

Which can also create problem?

[@shihabahmedalkatrani3050]

Thanks 🙏

[@jasssimm6687]

If we put 50 , it is instantaneous , but the starting current will be 6 to 7 times of the rated current , so it will trip , ??

[@kyutz6672]

Bhai apne like this kehte samay kya kia 1:16 pr

[@rameshpatange4333]

Why 50L/R and 50 (Instantaneous Over current) both required for motor?? How you will distinguish these to condition??

[@electricaltechnologyandind5335]

Current >=2*motol flc is detected by 50lr, and for current higher than 7 times is detected by 50

[@Doti_231]

please make video for big motor protection for 6.6 kV avobe rating 1 MW

[@mudassir160]

please make video on GPR calculations

[@ahmedfawzy5827]

Thanks 😘😘😘😘😊😊☺️☺️

[@Chandankumar-ex8ty]

Thanks a lot..

[@mohamedabdelrashid3080]

Awesome video, Can you please do video for the relays settings calculation for the motors protection such as 27,37,46

[@electricaltechnologyandind5335]

Ok I shall try... I am receiving lots of comments, and i shall definitely try to make video on all the topics

[@mohamedabdelrashid3080]

​ ELECTRICAL TECHNOLOGY and INDUSTRIAL PRACTICE Much appreciated, I'd like to get you advise, I can find a lot of materials giving the principles, but practically when I hardly can find any book or reference explaining the calculations or the design steps. any recommendation for a book shows the calculations in details.

[@badshahibrahim8475]

Please make on co ordination

[@srinivasanraja9160]

Try to upload generator capability curve for supercritical generator

[@erajaykumarv8755]

Nice

[@omarmohammed9661]

Thankyou bro

[@sitangsudey5419]

Really a exposure to industrial experience...Good explanation Upload some videos on protection of transformers and feeders w.r.t industrial practice as you are doing. Thank You

[@electricaltechnologyandind5335]

Thank you so much... Yes I have plan to update more videos on other machine protection, please stay tuned

[@lowidarwish9208]

where is the 51 & the 51N?

[@electricaltechnologyandind5335]

Motor has no need of 51 and 51n inverse time relay should be avpided for motors

[@ankitkumar-ek5xx]

sir hindi and English dono mi batana chaheyi olr

[@agushanatemaki5430]

,,👍👍👍

[@anandrajput7163]

Hindi me video banaeA

[@dilipsahusahu680]

Hindi please sir

[@themishraboy4068]

Vdo me bhi fat mar diya 😛

[@electricaltechnologyandind5335]

First of all spelling is wrong!!!!! Secondly vai itna to akal hai ki fart marta to usse edit karke nikal deta!!!!!! Those have been microphone sound.. so relax...

[@shihabahmedalkatrani3050]

Thanks 🙏