What to do when the Chrysler Keyless-N-Go remote doesnt work

[@wyattoneable]

As an owner of a 2019 Chrysler this is invaluable information. My hats off to you sir. Outstanding information.

[@MotorCityMechanic]

Appreciate it Wyatt!

[@bethdavis7986]

Will this work on a 2011 chrysler 300 base

[@perpgotti1901]

What if that still doesn't work

[@travisreeves4578]

That is great to know. In Wisconsin if you leave the key outside in sub zero temps it really weakens the battery (discovered this while winter camping). I was two hours away from home trying everything I could to warm up the FOBIK so that the battery would be strong enough for the Jeep to recognize it... now I know I can relax about that.

[@MotorCityMechanic]

Now that would suck for sure. Thanks for watching Travis!

[@DavidMirandaF]

Wow, that's the kind of info that maybe is written on the owner's manual but nobody ever reads it (even when they should!). Thanks for this critical piece of information, really appreciate it!!

[@MotorCityMechanic]

Your right....it most likely is in the owners manual. Thanks for watching David and for the comment

[@aspman97]

What to do if the alarm is going off once you open the door with the key?

[@billdailey9148]

One of my FOBs has gone dead. I use one more than the other and now one is unresponsive. I change the battery thinking that was the problem but nothing. No change so I heard that they fall out of program if you don't use them both equally. So, I have one that works and the other is dead. I have a friend who is a locksmith and he has the ability and equipment to reprogram the key to the car. He said if they're not both used continuously, they fall "out of love" with the car and then need to be reattached to the car. Hmmm... but now I know WHY. Thanks for the video.

[@Autofixpals]

Nissans dead key fob start procedure is identical to Chrysler. Awesome tip, this video will certainly save a lot of people some headaches and wallet pain.

[@MotorCityMechanic]

I have heard other brands have the same back up procedure.....cool to see which do and which dont. Yeah its sure to save money when it comes to a tow. Thanks for the comment and make sure to subscribe.

[@phprofYT]

It would have been great if the dealership would have explained that to us when we picked up our brand new 2014 Durango in 2014.

[@MotorCityMechanic]

I have to think that not all of them know this either. It should be talked about for sure at time of purchase.....its in the owners manual but if your like me.....who reads it lol

[@davidstreling3690]

read your manual its in there as well

[@jimeckenrode1271]

I have a 2013 Ram with that feature and often wondered what would happen if the fob failed. Thanks Dave for this video.

[@andrepaden4801]

Good information. You can all so check the battery inside the key pod to. !!!! 👍

[@stoweby]

This is silly, i looked everywhere for something like this with my 2015 Chrysler 200 and you are the first person to ever show this. Couldn't find it in manual, asking mechanics, and even had a mobile mechanic come over with a diagnostic tool. Nothing.

[@moocowdad]

as I said on your facebook page(described this exactly) it is important to remember this key fob is always powered up, unlike others where it only uses power when you press a button, thats why the handle will unlock without pressing a button,(so change the battery at least once a year) carry extra batteries, to change just take out the key put it in the slot at the end and twist , the fob will come apart take the old battery out, put the new one in and voila

[@joseconstante1321]

Could it be the key fob battery is going out isn't that like 5$ at AutoZone

[@RetaintoGain]

Just watched this and it worked! Key fob is dead. After 10 hours of work and it’s snowing tonight!! Thanks so much man!!!!

[@dudurty0652]

So glad I found this channel. This issue just started with my 2018 Chrysler 300. I thought the battery in the remote was dead so I changed it and still nothing. I followed the steps from your video and it worked like charm. Now I have find out how and why this happened.Thank you so much man, and you have a new subscriber. 👍🏽👍🏽

[@gsdfan8455]

Recently picked up a 2015 Grand Cherokee, and I’ve always wondered what to do in that situation. Thanks dude

[@MotorCityMechanic]

Your welcome and thanks for watching. Make sure to subscribe.

[@AntonioClaudioMichael]

That cool that the remote touches against the start button can start the vehicle very nice feature they added

[@MotorCityMechanic]

Its great when you have issues so that you can get back on the road for sure.

[@vr4787]

Great info. I don’t have to worry about this though since my ‘06 Dakota uses an old school key, one less thing to worry about, but if I ever get around to buying a late model Ram, now I know.

[@mrbizmarky1]

Dude this just happened on my friends Jeep Cherokee! It ended up being the batteries in the key fobs went bad! The car sat in my driveway for a week . My other friend is a chrysler mechanic and we thought it was the wyn module. I’m surprised he didn’t know that about the key. Thanks your videos are very helpful.

[@johnsimun6533]

As a owner of a Cruze with the smart key. Some times it doesn’t recognize my fob. I figured out, repeatedly pressing the lock or unlock, until I hear the locks work. That usually pairs them together.

[@robertschiedeck80]

You are making me look good to my customers. Hats off sir your a wealth of knowledge 👍👍

[@MotorCityMechanic]

Glad I can help out in what ever way I can.....even if its that lol. Thanks for watching and for the comment Robert. Make sure to subscribe if you havent already.

[@tripleseven8361]

I'm up here in Canada...Just a couple of days ago, a purchased a brand new 2024 JLU Rubicon, in Montreal, and was in the process of driving it home to New Brunswick, (through the state of Maine)...Half way there, on a minor, 2 lane highway, in the middle of Maine, I had to stop due to a railroad crossing signal... In order to save gas, I put the vehicle in park and shut off the engine...It wouldn't re-start, and road-side service wasn't able to help me...I was stuck, blocking my lane, for about 2.5 hours...Luckily, I found the Key FOB solution, on the internet, in which you physically use the Key FOB to push the starter switch/button, and it actually started... Now, my wife wants me to return the vehicle, to get our money back, but I don't think that's possible up here...

[@alistairlomas6768]

Had an issue of not being able to gain entry into my new smart entry Toyota. Turned out, rescue affiliated service couldn't even gain entry without breaking windows as the emergency key doesn't work if you have double dead locked your car. Car had to be moved with skates. After unloading the car started first time. Dealership informed me that they had a known issue where there are dead spots in the signal. Sometimes you only had to move the car a few foot to work again. Apparently there was a black spot in the car park at Trafford centre where it was always happening. Toyota head office said they were aware but decided it was more important that the cars security was upheld. I laughed & said it wasn't much good to the owner if they couldn't drive the car. True story, I kid you not.

[@rgrndu]

Alistair Lomas What’s double dead locked mean?

[@alistairlomas6768]

@@rgrndu I'm no expert but on setting the cars alarm I pressed once to activate & second to deadlock. It's a secondary locking system, like a dead bolt which makes the door extremely hard to jack open with a crow bar say. The emergency key only opened the door if you had set once. Because after moving the car from the signal dead spot, I'm not sure how the dealership would have gained entry without broken glass & neither did the recovery services as Toyota had not given them any info apart from take to nearest Toyota workshop.

[@geniferj]

Thank goodness I found you! My son let the battery run down and locked the fob in the car. You have saved me!

[@dwain415]

Sometimes it also means the battery in the fob is weak. I have been through this with my 2017 Chrysler 300 a few times. I noticed the battery in the fob needs to be changed often. After I change the battery, it works like new.

[@plutomars3181]

This is great to know. I am getting a new Jeep JL in a few weeks and now I can start it if key fob doesn't work. Thank you so much for sharing this secret.

[@MotorCityMechanic]

Your welcome. I have a few other videos on that vehicle so make sure to check them out as well. Thanks for watching this one and dont forget to subscribe.

[@RANDALLOLOGY]

That video is totally what I need. My son has a new Durango RT with the same set up. When his key fob craps out, I'm going to use this trick to blow his mind that the old man isn't totally dumb. Lol

[@moparchallenger749]

Outstanding Dodge😎

[@MotorCityMechanic]

Alot of different brands have gone to this set up from what I have been told. Seems to be the industry norm. Thanks for watching and for commenting. Make sure to subscribe if you havent already Kevin.

[@moparchallenger749]

MotorCity Mechanic Thank you Done 😎

[@MotorCityMechanic]

@@moparchallenger749 ......no, Thank you! lol

[@2b2unit]

Well good luck especially when your fob worked before you left, locking it & setting the alarm because as sure as heck, it's not going to let you in w/o alarms going off, lights flashing with the key...sitting outside residence inn and I'm stranded 9:00 at night. POC car

[@scottgorman7166]

Man David sure glad your out there doing these fix-it videos for us Ram (Dodge) owners....can be a life saver for us.

[@rgrndu]

Good tip, although I think it’s funny that you felt it necessary to show how to unlock the door with the key. “So after I stick it in I have to turn it? Jeez, so much work!” 😂

[@zarikparsanian3940]

I just bought 2019 NEW RAM 1500 Big Horn 4 Wheel Drive 5.7L Hemi MDS, What is your opinion about it? For many years I was hesitant to buy Chrysler products for myself. But researching specs and with today's technology on cars and trucks, I think made the right choice. Thank you for the awesome videos.

[@MotorCityMechanic]

Great truck.....I see no issues to be concerned with at this time. The 2019 is only about 2 years old so time will really tell. Otherwise alot of the components have been around awhile and have been doing great. Enjoy that vehicle!

[@zarikparsanian3940]

@@MotorCityMechanic Thank you so much

[@HighHopes5]

Worked for my 2014 Chrysler 300. Thank you so much! We were at the grocery store and this was the first time it happened. Normally don't watch car stuff but I've subbed just because how efficient and smooth the video was. 🙏

[@mrbreeze7373]

On my way to try this now- more crap to break and break it does

[@jeffreyhale1931]

Had to do this 3 days after we bought our Journey. Took us about and hour to figure it out. This would have been great 8 yrs ago

[@MotorCityMechanic]

Thanks for watching and sorry it took me so long to film it lol. Great job on figuring it out.....majority have no clue.

[@jeffreyhale1931]

MotorCity Mechanic 13 year old daughter came up with the idea. Full credit to her.

[@MotorCityMechanic]

@@jeffreyhale1931 Now thats a smart girl!

[@pdj1968pj]

Its nice to have an old school motorcity diy video. more please

[@MotorCityMechanic]

Many thanks! I never plan on stopping.

[@cruisepix]

Everyday is a learning experience with Dr. David!

[@MotorCityMechanic]

Lol.....most of the time we all learn at the same time....that includes me lol.

[@cruisepix]

@@MotorCityMechanic As long as I learn I won't remain stupid! lol Everyday should be a learning experience.

[@MotorCityMechanic]

It is for me.....thats for sure lol

[@ericadrayton7908]

Thank you sir!! I tried it and I was able to start my car!! Thank you so much for sharing your knowledge. 😁

[@dajourlivingston27]

So that's how you turn it on for only ACC. As a owner of a 2012 Chrysler 300. Thank you!!

[@mikebrown3032]

Usually the battery inside the fob dies. Happened several times to me. Easy to replace: pry the two halves of the fob to open it and replace the coin-type battery (standard 2032?: been a while.). Dealer charges $5.

[@marcgallantetlynemartelg9533]

Thanks you to lets us know about the antenna hidden behind the silver circular band that offers us an alternate way to start, dealer never mention this fact to us

[@goobersteel2231]

excellent demonstration

[@MotorCityMechanic]

Appreciate it George

[@imfloridano5448]

Yep that happened ta me once in a 2016 Chrysler 200 remote. The battery went ta the ether. Wish i knew about this last year cause i couldnt find any verbage in the owners manual discussin this.

[@MotorCityMechanic]

Yeah it happened to mine so I made the video. Thanks for watching it and for taking the time to comment. Dont forget to subscribe.

[@chippope8984]

Thanks! You helped us start our car today while on vacation about to head back home! Be blessed

[@mrjughead87]

You're a wizard Harry

[@MotorCityMechanic]

If you say sooo! Lol. Thanks and make sure to subscribe

[@XtheFox1]

That’s actually cool! I never knew that.

[@MotorCityMechanic]

Thanks for checking the video out.

[@lobuk516]

Always wondered what to do when the fob died. Thanks for the info👍🏾

[@MotorCityMechanic]

Your welcome. Thanks for watching!

[@joef2171]

99% of the time just change the battery when the information display tells you fob battery low and you will never have a dead fob.

[@jamcdona]

Did not know about touching the fob to the start button. Thanks, man. '15 TH

[@MotorCityMechanic]

Just another thing that gets hidden away in the owners manual that sales doesnt tell you.

[@shotgunnerB]

Thanks for taking the time to teach us all!!!👍🙋

[@timholmes4396]

My Ram truck with the Cummins 6.7 diesel could easily pull that train!! Thank you for the great analysis!!!!

[@MotorCityMechanic]

I think a few horses hooked up to it could.....Jason at Engineering Explained summed it up and explained it best, just about any vehicle can pull that load. Good old PR stunt. Thanks for watching Tim!

[@monogamousbonobo3923]

Great video! When I bought my used '13 team 1500, it only came w/one key fob! I bought another one online and learned I needed to go to the stealership and get the key fob programmed.... $60 for the labor cost... $30 for them to plug into my OBD2 and pair the fob w/vehicle! Prices may vary from stealership to stealership but $100 to do 10 minutes (i watched them from the outside the bay) of work! This was in Southern Oregon at one of the biggest ram stealerships in the PNW. SMH.......

[@Blazer02LS]

Most automotive locksmiths can program them in as well, usually for less money.

[@jerrynavarro2404]

Your video saved my rear end thank you so much sir 🙏

[@joeacfalle2380]

My RAM while driving, informed me that it wasn’t able to detect the FOB...seemed the battery life ended...though I was able to get home safely.

[@MotorCityMechanic]

It will eventually happen like that for sure. Thanks for watching Joe

[@keithwilliams2766]

Thanks for this valuable information. I always imagined what to do in a situation like this. Much appreciated.

[@MotorCityMechanic]

Your welcome Keith! Thanks for taking the time to comment.

[@markhem2475]

thanks mate just happen to me the other day new battery fixed the problem wished l had of known about that trick would have made thing a lot easier hempy from down under

[@andyphuong4826]

10 thumbs up David. You are life saver. Some days I will in this situation and just Panic and cry. Thank you.

[@18spd4Life]

Just bought a 2013 with only one fob, great tip man thanks 🤘🏻

[@MotorCityMechanic]

Your welcome Damon! Enjoy the vehicle and get you a back up key for those "crap happens" moments.

[@merengueardiente]

excellent detail

[@MotorCityMechanic]

Many thanks Rene! Make sure to subscribe.

[@Cloud999WakeAndGetFree]

Just followed the instructions step by step, and my ride started right up,thanks for the tip, Big 👍x 2

[@andrevallieres624]

Thank you so much, I've just managed to start my 2016 200 S with that trick, thank you again...

[@oldmansadventures4627]

I'm having this issue with my 2012 town and country however when I use the mechanical key it sets off the alarm. I've learned that on my model I can pop the button out and insert the fob to start

[@danellison1555]

Before u move on to everything at 2:54 how do u fix it if it won’t go to acc or start mode? My 2017 Chrysler 300 key fob locks and unlocks etc but trying to start the vehicle it just says doesn’t recognize fob and just stays in off mode….

[@davidbehr929]

What I want to know is what are we supposed to do when the problem isn't the key. Mercedes solved that issue with a traditional style ignition under the push start button. What do we do when the problem is the button itself?

[@MotorCityMechanic]

We had a set up like that before this system which did the same thing as pushing the key on the start button. If the key isnt the problem then it wouldnt make a difference.....your getting it towed. They can only put in so many back up systems for the "what if" situations. At that point you would be guessing as to the cause with out having a higher end scanner to check for codes in all the modules. Thanks for watching and for the question

[@houstonmontoya9111]

U saved my life ...my control battery was dead 🤯🤯🤯🤯🤯🙏🙏🙏🙏🙌🙌🙌🙌🙌🙌🐐🐐🫶🫶🫶🫶🫶🫶🫶

[@ashleyfoster4928]

Mine wasn't the fob it was the actual push button module itself that went out 2016 Jeep Grand Cherokee

[@MotorCityMechanic]

Thanks for the added info

[@billrimmer5596]

As usual very concise and helpful!! On the 2016 Town and Country I ended up taking the door off to replace the door lock actuator. That was good advice. I c why u r reluctant to post a video on that job. U must replace those all the time. Both have failed on this car I am working on. I am doing the left side today. And using the Mopar part like u recommend. Thanks again for your super vids. Loved the timing belt, water pump series on the PT!! It made me into PT flash. Lol

[@MotorCityMechanic]

Many thanks Bill! I sooo want to film that repair sometime eventually. I want to get a door from a junk yard and cut the front sheet metal off so that you can see the things you cant see when doing this repair. Maybe one day.

[@billrimmer5596]

@@MotorCityMechanic Thanks again!! One last question. Do u remove the glass when u r changing the door lock actuator? That seems to b where the hang up is.

[@rodneygregory6122]

Thanks for showing me how to start my 300 from my key fob!

[@BonheurEsperer]

Extremely helpful. Thanks for making a video about it👍

[@MotorCityMechanic]

Thank you for watching it Daniel

[@onis-carbinegarcia3252]

Thank you that reprogrammed the fob

[@old75v1]

Dave, Thank you for bring this procedure to our attention, you provide very informative how to videos, Tank you again!

[@MotorCityMechanic]

Glad I can share what I know to everyone thats welling to listen and watch. Thanks for the comment John

[@billybadassbutta_TV]

My 2019 Chrysler 300 is having this issue. I got a new fob battery, yesterday, it didn't fix the issue. I touched my fob to the button and it got me home. Now today, same thing, but even touching the fob to the start button doesn't work. My 300 will not detect the fob with new battery, nor will it start the engine. Any suggestions will be appreciated. And thanks for the video, man👍

[@HIMI2003]

Thank god, I seen this. I was trying to figure out how to use the new key fob system if the battery dies. I know the older systems allow you to remove the actual push to start button and insert the key and turn it traditional car. I tried it in the theses Chrysler dodge jeep vehicles and long story short. I almost broke the darn thing.

[@blueharley2]

this is in the manual, if you forget

[@MotorCityMechanic]

Very true....most never read it or have lost it. But if they watch the video.....I hope it get stored in their memory for that day when they need to use it. Thanks Mark for watching and for the comment.

[@ivanmiuller]

Was about to call AAA . Thanks man

[@MotorCityMechanic]

Glad the video saved you some waiting time for them to finally arrive. Could have been hours

[@qbee1422]

Wow you blew my mind with that

[@UrbanMasterExperiment]

Excellent info. Thank you!

[@MotorCityMechanic]

Your welcome and thank you

[@alvisadams6368]

I have a 2013 300 that has a key fob problem. I've had a locksmith problem, another keyfob ,but I still have the issue. I think it's my start button.

[@barrybebenek8691]

Fantastic tip for if someone’s stuck with a dead fob battery. Been there, done it. 🤦🏻‍♂️ Thanks for posting. 👍🏼🇨🇦

[@MotorCityMechanic]

Your welcome Barry! Thanks for commenting!

[@SlumberBear2k]

this is actually extremely helpful. I bought one of these and turns out the backup key isn't even lathed.

[@GSOAguitarplayer]

Nice Dave! My Mazda CX-5 2018 has the same thing. I feel much better know that.

[@MotorCityMechanic]

A few others have mentioned other brands as well. Seems to be the universal backup for these systems. Thanks for the info and for watching. Make sure to subscribe if you havent already.

[@GSOAguitarplayer]

MotorCity Mechanic Dave! Dude! You helped me out a lot with the patriot a while back!

[@MotorCityMechanic]

@@GSOAguitarplayer I see some many replies and screen names lol. Now that you mentioned it your name does ring some bells lol. Thanks for being loyal.

[@johnschiripo6472]

Thanks again for information and right to the point video. My son has 2012 Charger with this system and wondered what to do if that happens,now I know. Thanks again keep up the awesome job.

[@LenardEaster]

With my Ram 2500. They gave me a couple extra keys for it. I made the mistake of leaving the fob in my backpack and locked the door. The regular key unlocked it but set the alarm off. I was surprised the alarm didn't go off for you.

[@xadam2dudex]

These fobs have RFID chips in them and batteries ...sometimes the batteries go dead since they are always active they don't last as long as a regular keyless fob

[@MotorCityMechanic]

Luckily when the battery goes dead in the remote you can at least start it until you can get your hands on a replacement battery. Cool back up, just not many know about it. Thanks for commenting and for watching! Make sure to subscribe.

[@bowtech1020]

Great video man.... Did not know u can start with remote like that knew about the key thing

[@MotorCityMechanic]

We all learn something new everyday lol....including me. Thanks for watching and for the kind words. Make sure to subscribe.

[@angiesimpson8720]

Hi David, I was wondering if you could point me in the right direction on how to replace my ignition switch. My switch is completely pressed in. It looks like a simple job but I can’t find how to remove the interior panel around the switch to swap it. Thanks.

[@vanessababooram9469]

Good explanation

[@MotorCityMechanic]

Thanks Vanessa! Appreciate the feedback

[@mr.bailey3971]

Saved me time and money! Thanks for this dope video!

[@billybadassbutta_TV]

Is there a way to remove the "engine start/stop" button, and use the manual key to start engine? (2019 Chrysler 300)

[@PillCosby407]

Thanks bro my friend just call me he couldn't start his car. So I follow your instructions how to start the car its perfect he save 220 for now.

[@timothymroberts2949]

Another great informative video David! Thanks for sharing your knowledge

[@MotorCityMechanic]

Your welcome and thanks for watching Tim!

[@miked9104]

Excellent video, thank you 👍🏻👍🏻

[@MotorCityMechanic]

Appreciate it Mike! Thanks for watching

[@flatratemaster]

Great tip David!

[@MotorCityMechanic]

Many thanks man!

[@TheBuddy1939]

What a life saver. Well done thanks for sharing

[@MotorCityMechanic]

Many thanks for the kind words. Make sure to subscribe if you havent already

[@tonynguyen9453]

Thank you Brother 😊❤

[@MotorCityMechanic]

Your welcome!

[@travisboyd6156]

Great video. I have just purchased a 2011 charger R/T. The guy sold it because the push to start doesn't work. It's not the fob because it will unlock doors. And I can cycle off, acc but when I go to start nothing. Is it safe to say the push button itself is bad?

[@Smoak77]

BRO I KEEP HAVING THIS PROBLEM THANK YOU SOO MUCH MAN YOU A LIFE SAVER ✊

[@bcrawford9072]

Dave off the subject can you talk about how much a 3/4 ton can haul. Like payloads and 5th wheel trailers. The tag on my truck is like 2090 payload.

[@MotorCityMechanic]

That has been something that I have found hard to pin down as far as numbers. I never pull anything other then my camper once.....got a 3500 dually and just figured it can pull anything at that level. I do believe there is a website that might explain it. On the newer stuff its more easier to find.....for example on the 2019 3500 it states it can pull a fifth wheel up to 30,000 lbs and a gooseneck trailer up to 35,100 lbs. When I was search for info on my 2007 there really wasnt much that I could find. I wish is was simple enought that they would have one website with all the years and models listed.

[@shoppersplace]

yes but alarm goes off, you have to get a wrench and disconnect the battery. after a few tries, the car will reset itself and the fob works.

[@tylerb9808]

So, this is the solution when the fob battery is dead? Do you know WHY this actually works? Does the fob have to actually touch that ring to activate things, or just be in very close proximity, like just holding it up near the push start ? I wonder if its a passive chip in the fob that is read and paired by the vehicle? My '18 1500 fob has to actually be inserted and turned to start my truck, and I was told even if the fob battery is dead, it'll still work.

[@MotorCityMechanic]

This will work when the battery is dead sure. I am no engineer but we always say the "chip" is what its looking for. You have to get the remote as close as possible because the lack of distance with the antenna in the switch

[@ssks1979]

I learned something new, thanks! I wonder if this method applies to other auto brands ?

[@MotorCityMechanic]

Its possible.....just havent checked myself. Thanks for watching

[@hickt003]

Thank You & i will try this from now on as i consistient Ly have this issue ((about every 120 days. Idkw else to do, so i replace key fob batteries each time & it seems-to fix the issue temporarily. However i I seem to constantly be replacing key fob batteries as all else checked out To be ok (full electronic diagnosis & battery, etc) Is it normal when this happens & jeep wont start for the brake to be so hard to push on/in as well? Do the issues go hand in hand? Just aggravating !!! Very helpful info!!!

[@tracyhubble4692]

Mine still doesn't detect key fob. Brand new battery and pressing the key module with the key fob isn't working but it does lock and unlock the doors

[@MotorCityMechanic]

In this case you most likely have another issue. Could be the key/remote itself. It would need to be checked further and possibly a new key/remote programmed