Motorcycle Handlebar Risers - Design Development and Ergonomics

  Рет қаралды 14,233

Lone Rider

Lone Rider

Күн бұрын

Пікірлер
@nikkoremy771
@nikkoremy771 3 жыл бұрын
on my gsa, I have them in 2 centimeters model right version. they also exist in 4 centimeters, and also in a remote version. this is a great product for more comfort.
@sgrsnellgrove
@sgrsnellgrove 3 жыл бұрын
Hey Andrew. Thanks for the email with this thoughtful video. Will try to be as thorough in this response. I ride a 2013 Ktm 1190, I’m 6’2” with 1-2” longer than normal arms. Looking at your prototype my concern is that the rearward offset design will bring the handle bars too far back on the bike. Currently I run the sw-motech 1-1/8” handlebar risers. I purchased them because though the bike felt great seated, when standing I was forced to bend at the waist too much, putting mass forward which was hairy when braking or decelerating. The risers I have put the bars at the right height for standing, but due to the rake of the fork they already bring them back further than I’d like (end up too vertical with no athletic stance). If anything I’d love to see a reverse offset to your design so that compensating for the rake, the bars are in the same relative position front-to-back on the bike (just higher). If that makes sense? Totally understand your reasoning, love the ergo website, and this opinion may be based solely on my position on the T-Rex/Gorilla spectrum. Hope this feedback helps and good luck with the design!
@DrTudorMarian
@DrTudorMarian 3 жыл бұрын
Hi Lone Rider, i have a r1200rs and had 25mm straight risers on it, i wanted a more comfortable riding position and i mounted a pullback raiser (30mm rise and 20mm pullback). After the first testride i feel that the bike is harder to handle in the garage (unstable and almost dropped it when taking the bike off the central stand) and at higher speeds it seems to be harder to countersteer (it felt like a dream with the straight raiser but now it feels less intuitive and smooth and seems to lean into the curve in steps). Did you ever have this feeling? Do you think it might be because the center of gravity or might it be the geometry of the bike that changed that much. I feel there is a slight improvement in the riding position and i have a better placement of the gps/phone holder with this pullback riser setup. Do you think this might be just a temporary thing and i might get used to it after a few km? I don't find anything about pullback risers and their efefect on geometry and handling. Any advice is appreciated. Thank you!
@graemecartwright6638
@graemecartwright6638 3 жыл бұрын
Strong argument against them from a well known trainer in ZA. Have high risers on my 09 GS adv for dirt riding and enjoy the better grip when standing and not on the 2016 ADV
@cicero1467
@cicero1467 2 жыл бұрын
Nice videos.. I´m from Brazil, and I have a CB 500x today, and I want to buy a CB 650R, but I didn´t like the original Handlebar . So I want to know if you have a model of the Handlebar Risers, and If it really makes the bike more confortable, becouse I hated the one original.
@emanuelperez2329
@emanuelperez2329 2 ай бұрын
I have a Triumph Street Twin 2020. I am 1,64m tall. I feel unconfortable on long rides, because my body must be leaned forward, to be seated in the wider and more confortable part of the seat. Two Motone risers were installed, but the handlebar is stil far from me. After less than one hour I can feel pain in my hands and disconfort in my shoulders. Disconfort and some times pain is what I feel also in my lombar often. With the handlebar risers the cables are in the maximum safe lenght. Is there any solution that allow me to seat more vertically, with the arms slightly bent and relax in any ride? Thank you in advance.
@phillipfirmin3590
@phillipfirmin3590 4 ай бұрын
5'11", bmw r1250 gsa is my height and bike. I travel log distances.
@hakimbenferhat3019
@hakimbenferhat3019 3 жыл бұрын
Where can we find the questionnaire?
@pwestjr
@pwestjr 3 жыл бұрын
Just a quick notice. I think the top piece of the handlebar riser needs to be thicker and especially for off road riding
@LONERIDERMoto
@LONERIDERMoto 3 жыл бұрын
This is enough meat and will work in extreme cases (I run simulations). But I can increase to give an extra feeling of safety. Will send for independent testing and certification.
@pwestjr
@pwestjr 3 жыл бұрын
@@LONERIDERMoto When I first noticed it was the plastic ones but later in the video, the risers did look thicker. Probably a video issue like see steep grades in videos, while riding.
@mikeglick3507
@mikeglick3507 3 ай бұрын
Please look at the Suzuki GSXS1000GT. I have awful shoulder pain when on long rides. I am ready to sell this bike due to the terrible shoulder pain I get after a few hours of riding. I am 5'11" and have done as much adjustment I can do from the factory. I love the bike on short rides. but long rides it takes days for my shoulders to recover. Seated position, long distance, I think back and up will help. My Duke 790 is back 1'' and the bars are wider, and they are fine. I think a lot of GSXS1000GT riders would be interested.
@harveysmith552
@harveysmith552 Жыл бұрын
I have a 2020 Yamaha Fjr es looking to put conventional handlebars on it to replace the Honda Goldwing style bars which would entail I believe making a new top clamp or yoke. What ever you prefer to call it anything you're interested in?
@HowardNChauncey
@HowardNChauncey 7 ай бұрын
Did he get back to you? I have a Yamaha fjr1300 2008 that needs a handle bar conversion
@harveysmith552
@harveysmith552 7 ай бұрын
No, unfortunately did not but I did hear that the Yamaha super tenere 1200 top clamp will fit
@HowardNChauncey
@HowardNChauncey 7 ай бұрын
@@harveysmith552 has any forums or onliners confirm the fit?
@sofiadurao312
@sofiadurao312 3 жыл бұрын
hi! thank you for this1 I need this for a 2018 speed triple R. I am 5 7" and have 32 insime, thank you!!
@TheShamrockpower
@TheShamrockpower 3 жыл бұрын
Hello Andrew It would be very useful to have a ‘bike fit app / link ‘ to fill in , then we could buy your products , risers , pegs , seats and suspensions
@billwaterhouse5894
@billwaterhouse5894 2 ай бұрын
Are these still in the works?
@LONERIDERMoto
@LONERIDERMoto 2 ай бұрын
On hold. We have other projects in the pipeline for the moment.
@user-vy7gi8jo1v
@user-vy7gi8jo1v 3 жыл бұрын
Is Lone rider a french company ? Fred the founder is french right ?
@m3n0ch3
@m3n0ch3 3 жыл бұрын
That 45degree design is already out there and it does have a big drawback. On multiple bike, taking the handlebars back with them will have your handlebar interfere with your tank. I already have such a model and my next one will be for sure a model where the angle is adjustable so I can take them up when off road and bring them back when on the road. (the bike is a BMW GSA 2016) I'm 5`9 with a long back and shorter arms, so risers are mandatory for me
@shameersharaf8631
@shameersharaf8631 3 жыл бұрын
how much cost for hayabusa 2gen raisers
@miradockal9795
@miradockal9795 3 жыл бұрын
Modular risers is the answer. ROX style. But cant compeet with AliXpress price!!! Terefor you should consider something else.
@LONERIDERMoto
@LONERIDERMoto 3 жыл бұрын
We are not aiming to beat AliExpress prices or aim for that type of customer. Our products are certified safe and legal in country's that requires it. There are just some parts you don't risk your life of injury for saving 20$
@miradockal9795
@miradockal9795 3 жыл бұрын
No doubt..., I'm glad you are forwarding your Ideas to your customers. But I'd love to have adjustable height handlebar risers with optional forward or backward lean angle. Looking forward your idea 👍
The truth about handlebar risers
15:09
Bret Tkacs ADV
Рет қаралды 256 М.
Twin Telepathy Challenge!
00:23
Stokes Twins
Рет қаралды 62 МЛН
World’s strongest WOMAN vs regular GIRLS
00:56
A4
Рет қаралды 44 МЛН
I Built the World's Biggest Hydrofoil Board
16:57
rctestflight
Рет қаралды 549 М.
Burglars Hate Me For Showing You This!
27:46
HAXMAN
Рет қаралды 2,4 МЛН
Why I Stopped Wearing Motorcycle Body Armour
6:10
FortNine
Рет қаралды 1,7 МЛН
Free Ways To Set Your Motorcycle Up For Yourself
9:31
Chaos Causes
Рет қаралды 222 М.
How To Sit Correctly on a Motorcycle
8:42
Moto Control
Рет қаралды 1,1 МЛН
DO HANDLEBAR RISERS WORK?
8:51
Mr TPR
Рет қаралды 10 М.
Richard Hammond roasts James May's pub
10:08
DRIVETRIBE
Рет қаралды 2 МЛН
Your Handlebar Height Actually Matters!! Here's Why...
16:05
Ride With The Knights
Рет қаралды 84 М.