motorcycle powered sand rail

this is a little video of the build and ride of my single seat cbr 1000 powered desert car

[@DonnDIY]

That's one hell of a buggy. Great job!

[@Jacob-64]

Awesome build, loving the sheet metal work

[@CJLeTeff]

Ray I know you've got to be building something to sale your sandrail. What a work of art, wish I had the money, it's worth every penny.

[@raymiranda7507]

Case 275 thanks. yea I have a couple other projects I'm trying to get started

[@rjrr586]

Ray, That is a really nice desert car. Attempting to swap my chinese engine of my buggy to a motorcycle engine. First time for me to do this swap. Your video is inspiring to motivate me even more.

[@jstc89]

hey boss that is one sweet clean build . great job

[@montecrawford1502]

Looking good.

[@kalanischredder30]

Awesome fab and sheet metal work. Thumbs up.

[@codymontgomery7389]

That thing looks like a ton of fun!

[@phillcurran7323]

Excellent job, truly inspiring build..the music build up made me wanna just hit the highway and punch it.

[@raymiranda7507]

haha! thanks a appreciate the comment. its a really fast fun little car

[@jaychandanais5257]

Very very nice. Looks like Arizona landscape a little.

[@witosarlaw]

Matap bang... saya juga lagi bikin mobil dari mesin motor...😊🙏

[@fuckthebigbrother]

seller tip: turn down the annoying music and let hear the engine screaming...

[@raymiranda7507]

fuckthebigbrother I would but it sounds like crap with go pro case . sorry next video will be dun better

[@krazed0451]

Invest in a helmet, even a cheap one will reduce the likelihood of injury in the unfortunate case of your head meeting part of the cage ;-) Nice build!

[@Customwinder1]

Nice work mate

[@tommyeugene]

Hard to put something that cool together without A LOT of help from other talented fab guys (friends/fam) hope you appreciate that bud...great job to all of you!

[@raymiranda7507]

Defiantly man! And thank you

[@jakebewely6519]

Nice driving

[@DieselRamcharger]

lol go figure i would randomly end up here.... whats up ray!

[@raymiranda7507]

Haha I see what you been searching for! Lol

[@rdc7622]

Awesome!

[@domino2205]

nice job

[@Mechaniclyfe]

Very awesome

[@alejandrogarcia7106]

awesome!

[@duridersa]

damnit this video doesnt get old to me!! that rail is SEXY!!!

[@alianmehsood9705]

awesome

[@singhvlog6602]

Very nice buggy

[@benpearce628]

Where did you get the parts for that axle ??

[@hambamable]

This is awesome! Is there a build thread or more info/photos anywhere? Great build, looks like a blast!

[@lordpeekaboo]

Awesome work. What does the car weigh ?

[@carguy466]

Everything looked perfect except starting form 1:24

[@repalmore]

What differential did you use for the back end or is it just a jack shaft?

[@CJLeTeff]

Hey Ray, beautiful job, what engine did you use?

[@raymiranda7507]

it's a 2006 honda cbr 1000

[@isaacvargasnina]

que espesor de tubo usaste. cual me recomiendas., parece que soldaste con tig. . gracias. que tipo de amortiguares usas.

[@jaydenfalcke7841]

What engine did you put in it?

[@soundsforthemindamdsoul.7464]

what is the top speed you have attained?

[@sandman900rr]

Ray when you get Tired of replacing those pesky Alum Sprockets Let me know. I'll Make you one that will last a decade or longer. Nice Damn buggy!!

[@rubenriedel5581]

+ray miranda gracias por responderme que soldadora es la que usas en el segundo 00:20 ?

[@koolcruiserful]

question at 0:54 the tool your using looks like a burring machine/ bead roller did you make this tool? id like some more info on it if possible, thanks. also awesome build im gather all the info i can before I start my single seater build.

[@raymiranda7507]

Erik Brown yea it's a bead roller I made . top roller is on a sealed bearings to alow it to roll free with the pressure applied since I didn't gear it to the lower one

[@user-xl7dn3zu6t]

bro good build,but im loving the music,tron?

[@raymiranda7507]

Yo Mama . thanks and yea it's tron

[@tonymeraz2249]

Woooww

[@danielvenable4299]

what did you use for a rear end? I haven't started building mine yet just curious most of the mini sand rails I have seen on here have had one similar to yours.

[@raymiranda7507]

I used a latestrage micro stub hub and plates I developed for chain adjustment that utilizes a tatum 2 piston brake caliper. I make front spindels too and hub arm plates if you need

[@danielvenable4299]

ray miranda appreciate you getting back to me I'm between jobs and not workin on it at this time but I will contact you on here when I get to work on it

[@raymiranda7507]

Cool yea any other questions id be happy to help you out

[@raymiranda7507]

i developed plates that utilize a latest rage micro hub and a tatum disc and caliper. i also make the front spindels . if you need parts email me

[@raymiranda7507]

car is for sale $13,666 if anyone is interested

[@raymiranda7507]

+A. Mairican . I live in Phoenix Az . video was taken in Nogales Az . Coronado national forest

[@stevehusband5856]

Is it still for sale?

[@raymiranda7507]

mr. farmer yess it is still for sale

[@alianmehsood9705]

i buy

[@nobodyspecial313]

I want to like for what you built but want to dislike for the music covering up the engine sound. I'm surprised you used rod ends to connect your knuckles to the A-arms. In the orientation you have them I wouldn't have thought the balls could rotate far enough for good steering angles, but it seems to work. The reason they don't normally recommend you use rod ends in lieu of ball joints is that rod ends have a tendency to snap at the necks when you give them a bending load. It's awesome build, though! Really tidy and looks like it works well.

[@stephenbiggs2720]

G’day mate, sweet looking buggy. Do you sell plans for this buggy by chance?

[@raynemiranda5835]

i just have the basic measurments and bend angles but is my oun notes they are not in blue prints or any thing

[@raymiranda7507]

I built drive plates but the hubs are 930s from latest rage

[@cedricehrhold2264]

Hi Ray, I hope you are well. I saw several time your videos on your tube about your famous motorcycle powered sand rail. Congratulations that's a realy nice job. I like your creation. I would like to make also myself one desert buggy but with two seats maybe you could help me. Could you accept to sale me your buggy drawings ?

[@raymiranda7507]

Cédric EHRHOLD yea I'd be willing to sell them

[@jamesbranski2348]

does it have reverse

[@jorgeagundez3419]

Cuanto sale este proyectó ??

[@funfreq9282]

Great fab work! Is there a reason you didn't use a Busa engine?

[@raymiranda7507]

I wanted too but A bussa engine was way more expensive . And had another car with the same engine I liked it and figured it be best to keep them all the same

[@funfreq9282]

@@raymiranda7507 Did you come up with the cage design? If so you should draw up plans for the single and make plans for a two seat version of this using a Busa and sell them. I really like the cage structure, no dead tubes, suspension geometry seems to be right and looks fairly simple to build!

[@crazyman544]

What are the rear CV axles connected to? did you have to make the diff?

[@raymiranda7507]

Daniel Gallego I built a hub assembly. . It's locked from one side to the other there is no diff

[@crazyman544]

Nice if you don't mind me asking how did you exactly build your hub assembly?

[@raymiranda7507]

Daniel Gallego I have the assembly for sale if you need one let me know I allso have front spindles.

[@carriemoritz811]

were do you buy them

[@xushenxin]

is there a differential on this car?

[@raymiranda7507]

No diff no reverse

[@raymiranda7507]

thanks everyone for all the views and comments. . recently getting my sockets from sidewinder now .they make a great product and are good people . I should be putting up new videos soon . I build chain drive plates and spindles if anyone needs

[@Suzukipilot]

if you could just make the driven sprocket and rear end drive for me, how much would that be?

[@robbiecoyle22]

thats bad ass I just recently had the idea to go ahead and build my own buggy with a Hayabusa engine trying to find as much info as possible but I'm kind of hung up on the final drive as to CV axle sockets and a final drive sprocket size any help would be greatly appreciated again that is a bad ass buggy

[@raymiranda7507]

gear doun as low as possible for sand . I'm running a 13 front sprocket and a 70 rear. buy a good chain. "Sidewinder sprockets " is the best chain I've ran so far and they can make any size sprocket you want . I make the chain drive asembly it uses 930 cvs , hub plates and spindles to . here is my email mail if you have any other questions [e-mail]

[@stephenbiggs2720]

ray miranda. Hi Ray, I’m going to email you on the above email today with some questions.

[@rexwest3348]

Do you have the front suspension plans by chance I have a dwarf car I'm making into a desert buggy just need the front suspension plans your the closest thing i have found that I'm looking for

[@pamelacarterman7540]

race time

[@rubenriedel5581]

+ray miranda como lo patentaste bajo que grupo como auto/moto/cuatriciclo? esa es mi duda porque le veo la patente o es de alguna otra cosa y le pusiste la patente hay?

[@raymiranda7507]

Estate banjo vehiculo Para solo off road

[@drxcustoms7967]

This thing was for sale a year or so ago. Do you still have it?

[@raymiranda7507]

Yea it's still in the family

[@duridersa]

where u drivin this out in az?

[@raymiranda7507]

Yea . that video was in coronado national forest. in Nogales Az

[@duridersa]

+ray miranda awesome, thx brew!! great rail by the way!!!!!!

[@Vinpark10]

how much would it be for a chassis and could you do a complete build and if you can how much would it be

[@raymiranda7507]

yea it would be around 10,000 for a rolling chassis all depending on how complete you want it . and yea i could build a turn key for 20,000

[@corbanjackson487]

I'm looking at building something like this with an r1 motor but I'm stumped on the whole driveline part. what's the part called that the chain connects too?

[@raymiranda7507]

Corban Jackson I just call it the chain drive

[@corbanjackson487]

ray miranda did you buy it or build it yourself?

[@raymiranda7507]

Corban Jackson yea I build the plates that hold the 930 micro stub hub

[@corbanjackson487]

ray miranda oh ok. thank you for your time.

[@raymiranda7507]

Corban Jackson lmk if you need a set

[@biggROB45]

What wheels are those?

[@raymiranda7507]

I don't remember the brand but the bolt pattern is from a Kawasaki terex

[@1966cambo]

Nice build! Do you plan on selling any ?

[@raymiranda7507]

Thanks yea this one is up for sale

[@1966cambo]

ray miranda how much and where r u?

[@raymiranda7507]

@@1966cambo I'm in Glendale AZ. $7000

[@1966cambo]

ray miranda if you were closer I would be very interested!

[@raymiranda7507]

@@1966cambo problem I'm having is no one else fits in it ! Lol

[@jeffreyrice9686]

I need the biuld list please

[@raymiranda7507]

me costo como 10 mil en puras partes

[@tedstyle3798]

It's broken you can see the wheels don't even spin

[@robertd.hullinger8620]

wOULD YOU BE INTERESTED IN BUILDING A VEHICLE TO BE ENTERED INTO THE BAJA 500? i AM SELLING A 1966 MUSTANG, AND MY HARLEY TO GET ENOUGH FUNDS TO ENTER INTO THE RACE. IT IS SOMETHING I HAVE ALWAYS WANTED TO DO. NO MORE EXCUSES, NOW OR NEVER I ALWAYS SAY

[@florenciob]

Could you send me the plans? I would like to build one.

[@raymiranda7507]

I could build you a chassis

[@jeepin_kid]

ray miranda how much?

[@pauldurr1251]

gttoharo 8k for a roller

[@sedatkarakoc6465]

Paul Durr hello I want to make me buggy. Can I get your project?

[@pauldurr1251]

Yeah send me an email to [e-mail]

[@joec6974]

cool video. terrible music!

[@decepticonsofnwo]

too slow, to heavy

[@radnarley]

This is powered by a motorcycle. I don't see a motorcycle.

[@raymiranda7507]

radnarley . motorcycle engine. ..