I have the same bike as yours and I was using the stock chain tensioner. On the first attempt at starting the bike the tensioner slid in and broke 8 spokes. We then drilled the tensioner into the frame of the bike so it wouldn’t budge but it decided it wanted to bend and completely destroy my wheel
@isaacpeck21545 жыл бұрын
First thing u need to do is get rid of that spocket that attaches to the spokes get the one that attaches to the hub
@dustinh4175 Жыл бұрын
If you install them carefully they work fine unless your running a hot rod motor. Actually I've heard that getting those sprocket adapters to not slip is a problem. From my personal experience the rag joints work fine but they are a pain in the ass to mount
@rich52movie4 жыл бұрын
I use BOTH chain tensioners, the chain rides very smooth! May need a little modifying.
@harrisonp37274 жыл бұрын
Me 2
@kevinguitard49862 жыл бұрын
I put one of these on after countless tinkering with the cheap system that comes with the kits.DEATH TRAPS!!! I upgraded the spring on my tensioner. Bingo. Ready to rip n roll😊
@dogge9292 жыл бұрын
Is the death trap the stock tensioner or the new one with the regular spring? I'm confused by the syntax of your comment. I ordered a new tensioner for myself. Should I upgrade the spring?
@kevinguitard49862 жыл бұрын
The stock areva death trap. The one that runs off the clutch housing needs a stronger spring.
@custombikedesigns3433 жыл бұрын
OH MY GOD! TAKE OF THE PINK DRESS AND TOSS THAT CHAIN GUARD OUT! What men do! LOL
@whitechrist87004 жыл бұрын
Thumbs up just for the Schoolhouse Rock T-shirt!
@williamsporing15002 жыл бұрын
Folks, if you put the chain UNDER the roller, it pushes the bracket out away from your spokes.
@SoughtAnarchy4 жыл бұрын
0:43 This happened to me. It ended up coming loose and breaking two of my spokes. Lucky I was only going like 5mph and turned it off as soon as I heard the weird noise
@hillwynn2107 Жыл бұрын
You can always add a self tapping screw through the stock tensioner.
@a1930ford4 жыл бұрын
I have that Nel Lusso bike, too. I am thinking of putting a friction-mounted motor on it though instead of the 2 stroke as you did. I have already removed that plastic plate and medallion at the frame and will likely be cutting the rack off to allow the friction-mount to be placed on back. If I do that, I'll cap the ends with rubber pieces. These racks are notorious in breaking at the welds. I will be adding a 4-stroke engine. No need for a tension adjuster in what I am planning, but I may pick up another beach cruiser and put in the same type of motor as you have and then add in the tensioner as you did. Nice mod and seems like it should work well. Thanks for posting. Those look like the original tires on your bike. How are they holding up for you?
@Leone41302 жыл бұрын
Day 2 of my first motorized bike, chain tensioner blows up my back wheel. I'm uninjured and not too far from home, made this same purchase right away.
@augustdallas94314 жыл бұрын
I recently purchased a used motorized bicycle. I've got over a thousand total in the bike. I'm about to install spring tensioner. Thanks for video. My question is; how tight should chain be set? I've heard both tight and semi-loose and neither has worked. I'm hoping spring tensioner solves problem but which is it? Please!
@Rawhide1062 жыл бұрын
Take the rest to a motorcycle repair shop and have them stabilized the 420 chain for you about 15-20 bucks
@diatonicdoug65252 ай бұрын
That tensioner does not align chain where it is most likely to derail: where it meshes with rear sprocket. It also slams down during starting procedure
@JorgeRodriguez-ei2gi3 жыл бұрын
Great upgrade, mr steve, thanks, keep sharing on motorize bike tips & tutorials,, bike builts, thanks, joe
@bobthebuilder94165 жыл бұрын
how is it riding so far??
@brianbryant2598 Жыл бұрын
so then the chain tensioner is not worth it or why is it beneficial to have a chain tensioner on a bike with a motor what does it help it in?
@DudeWithALude973 жыл бұрын
Bought this and installed but my top chain hangs and touches my bottom chain?? I tried taking a link off but taking even one link off made it too short and it wouldn’t reach. Any suggestions???
@TheUncleBigBad2 жыл бұрын
I just got my upgraded hain tensioner from BBR for that exact reason. It literally ripped off half of my spokes and destroyed the wheel.
@killwa1114 жыл бұрын
That exact issue is what happened to my bike lol so I think I’ll buy this thanks man
@PinkCampfire Жыл бұрын
excellent tutorial thanks. about to install one
@JohnWelcome-b9g Жыл бұрын
I actually bent the POS stock tensioner luckily I didn't get hurt
@TheHighBreadGuy4 жыл бұрын
Keeps going in my forks no matter how tight I make it
@johnweiers33604 жыл бұрын
That is the best option I have ever seen
@davidotto76662 ай бұрын
You take your chain guard the top of our connection to the motor and you pulled in between the cover and the engine that's all you got to do
@dustinh4175 Жыл бұрын
I crashed because I was looking down at the tensioner and hit the curb
@nzpaddockbashers81715 жыл бұрын
Ohhh nice to know
@music95564 жыл бұрын
that spring looks very weak? looks like it will stretch eventually.
@kevinguitard49862 жыл бұрын
install a heavier gauge spring like I did
@johnargue29773 жыл бұрын
Only $15 . All this time I keep readjusting the tensioner..geez am gonna get one
@donttread54142 жыл бұрын
My plastic wheel tensioner literally exploded off my bike today, hit my spokes and flew off somewhere in to a field. Had to bike home. Ive been researching options for better quality wheel so this dont happen again, a metal one would be perfect.
@lovnino75813 жыл бұрын
So I need help I just got my spring tension or installed it and everything But the little bolts on the arm Don’t seem to tighten all the way because the inside of the boat cab has some type of interlocking it
@lilkevin999910 ай бұрын
Thanks man 👨 🙏
@dustinh4175 Жыл бұрын
How did the tensioner work?
@justinstrickland41993 жыл бұрын
thank you!
@kronikphase2 жыл бұрын
piece of hose helps save your paint find it helped it grab more evenly . drill thru your frame and tensioner once mint and aligned . locking pin little bolt or something to save the spokes . if u have to run the shitty one like me for now till this part arrives :) cheer s
@jeffanderson22453 жыл бұрын
I installed mine and the cranks hit the bolts on the tensioner.
@davidmethod73925 жыл бұрын
How do you get the spacing between the 2 chains my chains are so close that they are hitting each other they aren’t lose it’s tight but idk how to get that gap
@nikolasstankovic67944 жыл бұрын
David Method nigga penis
@Oli420X4 жыл бұрын
Me too
@masongreen33313 жыл бұрын
Same problem
@lexuses39423 жыл бұрын
I’ve seen bikes with no chain tensioner at all..they have a spring loaded one from factory on the bike, do I need one if my mountain bike already has one ? The tensioners are needed for a one speed bike
@lexuses39423 жыл бұрын
@@Steve_Does_Stuff Yeah it’s just a theory of mine I’ve been contemplating. Very curious I just don’t want to destroy anything
@davidotto76662 ай бұрын
That's why you take that cheap ass tension in the back of the bike and you weld it right on the frame that's why I do mine I pulled it and I weld it it didn't move yet
@sapotts13874 жыл бұрын
It doesn't look like it adds much tension though....
@shaun52064 жыл бұрын
I have a stretched out frame and need 2 chain tensioners I purchased the pulley arm tensioner since the other doesn't fit on a 4 stroke does anyone have a video on installing them
@djmanny90824 жыл бұрын
any extras anyone has to use like a tensioner and many "upgrades' on the aftermarket besides the kit is a waste of money unless you put together an aluminum bike
@tomlorenz34744 жыл бұрын
Cool video I will grab one of those
@mickeycab1 Жыл бұрын
Nice
@maskedmofomike4 жыл бұрын
i can't wrap my mind around how these moped type bikes work. it just seems like the motor chain would turn the back wheel so the 6 speed chain should move with the back wheel just as quickly and make the pedals spin 20 mph. changing the gears in 6 speed mode while agh. i can't even explain my confusion
@st.paulmn91594 жыл бұрын
The rear hub “free wheels” So the gear don’t move when you’re doing “20 mph”
@sanesaint87253 жыл бұрын
All you have to do is drill a hole through your bicycle and bolt it on
@mbrrideitlikeyoustoleit84365 жыл бұрын
Do not use this bike frame's crack everyone I've seen built crack just use a different bike
@bingerr5 жыл бұрын
First!! Nice vid.
@jamram7825 Жыл бұрын
They r trash and can end up blocking your pedals from clearing thru