Motorized bike new exhaust and ride in the rain!

new flex pipe exhaust!

[@twowheeledadventures]

www.amazon.com/dp/B07W6M2DPV/ref=cm_sw_r_cp_apa_i_O1RoFb72WTS9B. Exhaust link if anyone wants it!

[@motorizedbicyclenation53cu90]

Did it add much power at all on torque or more mph

[@twowheeledadventures]

@@motorizedbicyclenation53cu90 Nothing noticeable.

[@HanzelFonferek]

Thx! I was thinking about buying one! Is it still working pretty good for you?

[@twowheeledadventures]

@@HanzelFonferek yep, its actually outlasted the motor and is on a new one now lol

[@HanzelFonferek]

@@twowheeledadventures wow! Lol

[@sxggaming8518]

Keep posting bro 👌

[@Lookatthebottom]

That exhaust is slick! and the bike sounds great.

[@twowheeledadventures]

Thanks!

[@Wwill1569]

all i could hear for half of it was wind😂 but ya

[@jerryb1234]

The Hulk strikes again, lol, that has got to be one of the cruddiest 2-strokes I have ever seen, Congratulations!, lol, it just shows that you enjoy it, thanks for sharing.

[@twowheeledadventures]

Thanks for watching lol 😂🤣

[@quantumbox01]

I have just bought this exhaust for my stock motor, hoping it will give a little boost. currently use a 32tooth sprocket which is way too low so waiting on a 40tooth arriving

[@an7d7y]

They are some fun

[@twowheeledadventures]

For sure!

[@heavystarch100]

Did you smear shit on your motor?! 😳

[@motorizedbicyclenation53cu90]

Get grade 8 mounting bolts and exhaust bolts an ms ya golden

[@motoguy1586]

Love the throttle setup have the same one and I have the same pipe and its crap wondering if heat wrap will fix leaks

[@twowheeledadventures]

Mines not leaking yet but I was worried about that :(

[@motoguy1586]

@@twowheeledadventures yea they only last about 2 months before the seams start splitting

[@breezetixmoto]

now you're triggering everyone with OCD with that handlebar setup lol wtf

[@twowheeledadventures]

Lol 😆

[@stanleydograu150]

where did you buy this rear view mirror on the left side of the handlebars?

[@twowheeledadventures]

Amazon, I sadly don't have a link anymore though as it was on an old account

[@stanleydograu150]

@@twowheeledadventures OK thank you! I am Brazilian and I like to watch your videos because it shows different and beautiful places. Just an observation; your motorized bike is very weak on the climb, why?

[@stanleydograu150]

@@twowheeledadventures oh, I'm a male person, 😂 I'm just saying this because there may be an error in the google translation 🇧🇷

[@twowheeledadventures]

@@stanleydograu150 Its weak because its a pretty steep hill, its hard to tell in the video though, I had a bike with a 56 tooth rear sprocket that would make it up no problem but sold it, also thanks for watching!

[@stanleydograu150]

@@twowheeledadventures oh yes, now i understand. the video was very good. liked it

[@billrivers2578]

How long have you had this does it last... I just got the bionic viper from amazon looks identical to this one..

[@twowheeledadventures]

I haven't used it much my motor blew shortly after this, so I can't speak for its longevity, I like it enough that I will be using in on one of my other bikes shorty though.

[@billrivers2578]

Niomi Viper is what I have. How long have you ran yours? Does it last?

[@twowheeledadventures]

@@billrivers2578 I only got to run it a few rides lol, I will put it on another bike eventually though.

[@artofdisguy3401]

@@billrivers2578 I've have both the niome and the kinbell model, identical , these exhausts all come out the same factory, mine have been on and off different motors for 2 yrs now

[@marcs4091]

That exhaust would sound good on the Phatmoto!

[@twowheeledadventures]

Oh I have plans for the phatmoto eventually as well!

[@billrivers2578]

Did you lose any top end speed? Compare to stock exhaust???

[@twowheeledadventures]

It stayed about the same honestly

[@artofdisguy3401]

Pull the cap off the baffle can and pull the baffle out,, helps the top end huge, I just used JB weld to put cap back on. Head bolts break due to unsupported exhausts, the backers work. Drill a 10/32 bolt thru the tensioner and frame to keep it secure

[@twowheeledadventures]

Good advice thank you!

[@Wwill1569]

could u review a potato pipe

[@MetalMaster8888]

Don't use bolts there, just use studs and nuts. You have threaded holes with limited depth, so your bolts just rests on the bottom while you try to tighten the flange.

[@DesMck36]

Geez bro, what did you do to that to need all of that JB weld ? LOL

[@twowheeledadventures]

Even after fixing all this a year later I still call the bike "JB" lol 😂

[@SmokeyVlogs]

me : its raining outside , cant go ride .. meanwhile austin is like rain? haha water cooling !

[@twowheeledadventures]

Add some soap and its a free shower!

[@danpen717]

AT THE END FLYING BY CARS

[@robertkgunn]

That is the nastiest bicycle engine I’ve ever seen lol

[@twowheeledadventures]

It's nickname was JB from all the JB weld lol 🤣

[@michelmullaney3641]

It’s actually pronounced Poe Poe not pooopooo

[@twowheeledadventures]

I might be stuck saying poopoo now lol 😆

[@robertkgunn]

It’s poo poo