Mouldy Shower Cured For Good

🛒 amzn.to/3hdhXNq
Dryzone Mould Remover and Prevention Kit
The definitive long-term solution to mould with dual-action mould remover & sanitiser spray.
About Dryzone Mould Removal and Prevention Kit
Tired of cleaning the same mouldy corner again and again?
Standard household cleaners can often just hide the symptoms or even encourage regrowth. Dryzone dual-action Mould Treatment Pack immediately cleans the mould and protects from further infestation by destroying the mould organism and spores.
Part 1. Fast Acting Mould Remover - Astonishing visual results in less than three minutes. Dryzone Mould Eliminator is a highly effective, bleach-based cleaner designed to remove mould and mildew from walls, ceilings, floors and other household surfaces within minutes.
Part 2. Long-term fungicidal protection, Biostatic effect - Dryzone Mould Sanitiser is a biocidal solution designed to kill mould spores, sterilize the area and prevent regrowth on treated surfaces. Periodic application is advised to keep bathroom, kitchen and household surfaces mould-free.
Easy to use - Treat mould-affected surfaces in under 30 minutes with little to no scrubbing, depending on the severity of the infestation.
Use Part 1 to remove the mould, rinse or wipe away, then apply Part 2. Leave the Sanitiser to work for at least 1 hour for maximum effect before rinsing.
Kit components: 2 x Dryzone Mould Eliminator 500ml, 1 x Dryzone 100 Mould Sanitiser 500 ml, 1 x Microfibre cloth, 1 x Pair of protective rubber gloves.
For damp and condensation issues, see the other products in the Dryzone range or call Safeguard for a free consultation.
==========================================
#mould #mold #bathroomhacks
🔗 Skill Builder Link Tree: linktr.ee/skillbuilder
👍 Tell us what you like: skill-builder.uk/vote
📪 Ask Skill Builder: skill-builder.uk/send
🎥 TikTok: / skillbuilder
📣 Facebook: / skillbuilderchannel
📷 Instagram: / skill_builder
🛒 As an Amazon Associate, we earn from qualifying purchases
🎬 All videos: kzbin.info...
💧 We Support Charity Water: www.charitywater.org
◾ Out of respect to our channel sponsors and the wide variety of people who watch our videos, we'll remove comments that do not follow common standards of politeness and decency.

[@sasa1982uk]

If you keep doing videos like this you will be keeping me out of a night job

[@Oli_Hudson]

Your old video of cheap bleach soaked into toilet paper or kitchen roll and left on top of the silicone for a few hours has worked for us time and time again!!

[@gdfggggg]

Yeh, my missis does the same with cotton wool. Works a treat.

[@bikeman123]

It's a bit of a faff though.

[@rufus_mcdufus]

Don't spill it on your chrome tapes like I did though! The bleach stains the chrome and can't be removed.

[@Uftonwood2]

And a bottle of bleach is a lot cheaper, but just as effective.

[@42RHD]

It's a great solution, but the mould always comes back eventually because it grows roots into the silicon and the bleach only really reaches the surface. It's a ruddy faff but if you cut the silicone out and replace it cleanly, you can fix it for good.

[@tikaanipippin]

Whenever I see a product in a spray bottle which warns that it is problematic if inhaled, or gets in the eyes or on skin, I think: "Why is this not a gel formulation in a precision applicator?"

[@truckerlee5975]

Mould Magic is a gel and works great.

[@JamesBrown-yn7xr]

LOL, my dad invented it :-) He turned Genolite into a gel formula back in the 60's. Back in the day when you were allowed proper chemistry without skull and crossbones on everything.

[@rufus_mcdufus]

I've still got some Jenolite in the garage which probably dates back to the 60s.

[@coley1skipton]

Great advice as usual Roger 👏👏

[@SteveAndAlexBuild]

Great stuff Roger 🧱🧱👍🏽

[@MrJimtimslim]

What a great channel this is. I'm in the trade and have learned a lot from these guys. Top of their trades 👌

[@42RHD]

They are absolutely brilliant! So much down to earth advice.

[@henryparrott2447]

Love ❤ your channel

[@davidpriest5253]

Nice one Roger, another great video. Astonish mould remover works really well, and only costs about £1. Its not preventative though, so not a full fix.

[@henryparrott2447]

Thanks mate

[@allenglishknives6823]

So glad I found your channel. Just re-sealed my shower tray using your video and now ordered the Dryzone. Feel like a Pro 😁💪🏻

[@SkillBuilder]

Welcome aboard!

[@desmayhew]

HG mold remover foam spray is also superb. The foam sticks well to vertical surfaces and given 30 mins removes light mold. Another tip I was given - never lick your finger when smoothing silicone you are effectively putting germs straight into the silicone from day one.

[@captainbuggernut9565]

Yeah that's what I use along with clear jointing tape. You can't see it and it stops the mould growing back for longer. Plus it stops any leaks in the silicone.

[@norristhom]

Fantastic stuff, agree

[@norristhom]

Actually, couldn't get hold of any after about a year of not needing it. Purchased the Killrock mould spray and that seems to have worked pretty well too

[@Bertie_Ahern]

A very cheap and extremely effective solution is to boil a kettle of water, gingerly pour it over the mouldy silicone areas, and then drizzle neat bleach over the top. The heat causes the bleach to act almost instantly and gets in surprisingly deep. 10-15 minutes and the mould is all gone. Ventilate well, however!

[@summersevening]

Thanks, will try this

[@manfromdelmonty303]

@@summerseveningdid it work?

[@ClarkeeKat]

Cheers for this video, I will re-silicone my bath and buy this product, thanks for the tip

[@ForViewingOnly]

Roger, fantastic to hear you on Jeremy Vine's show again yesterday on Radio 2, and with your own jingle! Have a great Christmas mate.

[@SkillBuilder]

Yes that was good fun hearing that. I might get another gig if they have invested in a jingle. Happy Christmas to you too

[@garageowns9784]

Heard you on radio 2 recently and again today. You come across brilliant. New fan here

[@SkillBuilder]

Thank you very much.

[@bobbygraham7617]

There's a discussion to be had around how safe and possibly carcinogenic biocides like this are. Especially given that remnants will remain in the shower area in some form or another.

[@vincentwilkes9611]

Unfortunately does not seem to ship to the states, but informative as always.

[@sarahlouise7163]

make a stiff but pliable paste with thick bleach and bicarbonate of soda. apply with the back of a teaspoon, pushing the paste onto any black mould leave for a couple of hours, or overnight, the rinse away. spotless and bright! works a treat, especially on black mouldy silicone, which most proprietary cleaners don’t shift and it will stay away for months and months, if not permanently. costs pennies, not particular toxic

[@hannahjames3180]

My silicone needs replacing. I'll be sure to purchase a good quality tube. Thanks! Roger, also, been having heating on all day and up until 11pm but still get condensation on windows. Any suggestions?

[@graemesmith8509]

I use forever white silicone, this product seems to be ahead of the game with mould

[@SkillBuilder]

I have used that as well, good product

[@graemesmith8509]

Will definitely give Dryzone Mould Remover and Prevention Kit a try.

[@Phantom-mk4kp]

I wonder what effect would be , mixing a small amount of strong bleach in the grout before it is applied

[@Rbar-s6q]

Do you need to replace tile? If, you keep getting mold in shower.

[@geraldrees7846]

Hi , what do think about Passive Ventilation systems? Do you think they work, is it worth having one installed in a home?

[@peterbelcher8146]

Will this work on the ceiling above?

[@matthewsellers82]

Thick bleach and a paintbrush, repeat as necessary (every 2-3 months). I've worked in lots of big houses and they suffer from mold just like the rest of us. In fact the old ones probably more so.

[@utubeape]

I agree, I have noticed this, its because their cleaners do the same easy spray and wipe every time they visit. As a decorator somehow it is MY job to deal with mould

[@hayleyferguson5284]

My parents fit into this category and my mum does her own cleaning at 69. Their houses have always been hospital grade clean, even when my sister and I lived at home. My dad is 70, has suffered MND for over 20 years and only recently bought a mobility scooter so he can keep doing his own gardening, “to keep active.” He deals with extreme nerve pain, can hardly walk or talk but continues to be as independent as ever (although he recently had to sell his farm and boat because it was just too unsafe to continue). We may not see eye-to-eye but I’m so proud of them both.

[@Rbar-s6q]

When, you clean the mold do you reseal it and caulk it?

[@brianfreeman8290]

All my fittings are fibreglass, not ceramic. Will the surface be affected please ?

[@paul756uk2]

Fortunately, I don't have any silicon in my bathroom to go mouldy apart from the seal around my Dallmer shower drain.

[@newbeginnings8566]

Roger. How about a 6 month trial of a few different silicone sealants to see which brands are actually up to the job?

[@SkillBuilder]

Difficult to do and most people know that Dow and Forever White are good. The £2.00 tube is likely to be rubbish

[@analogdistortion]

Everbuild forever white?

[@stuart.barkley]

Must be good. The radio 2 plumber says it's good! Got his own jingle too. Where do you go now you've climbed Radio "Everest"?!

[@Hyde999100]

Try Cillet Bang mould remover...very strong...very quick. Test before use on paint, can use but be quick. £1.00 a bottle...Pound Land!

[@bigend07]

Amazing stuff, never had a mould problem since I found cillet bang

[@Hyde999100]

@@bigend07 Now you are a convert!!!

[@bigend07]

@@Hyde999100 been using it the last two years amazing stuff 👍

[@Chief81]

Yeh the black mould one is really good, just spray leave for 20 mins & rinse off no scrubbing required.

[@taylorjones1540]

Best thing for those tiles is to take them out and start again, they don't line up and they are definitely not flat

[@gdfggggg]

Some home owners aren’t that bothered about millimetre perfect tiles and grout, they’ve got more important things to spend their time on.

[@Alexander_l322]

@@gdfggggg well be that as it may. Those tiles are still a bodge job

[@gdfggggg]

@@Alexander_l322 well, if they’d have paid a professional to do it then yes. Although, I’d assume they’re not Leaking and most people aren’t spending their time on their hands and knees with a microscope checking for inconsistencies.

[@ecospider5]

Did you miss his statement of. This is a fix for people that don’t have money. If they had the money to get proper tile work done they would probably get proper ventilation installed into their shower, removing the mold problem. Also if this is a rental who exactly cares about the tile work?

[@bikeman123]

No so easy to replace without destroying plasterboard walls though.

[@belucky9630]

Just found your channel taken in as much as I can . Do you still take on projects? … ? I’m gonna be converting a brick barn /so brick barn bungalow . Got to have a metal roof. /zinc and all the new rules and regs have to do something along the lines of solar power, heat pump system (not really struck on pump system idea) ideally, would prefer to over insulate the barn and hopefully get away with solar power along with the traditional method going for underfloor heating, just interested to see the best and cost-effective ways Re solar, or any other suggestions.. …👍🏻

[@brandigeorge8803]

I haven't found anything to get rid of mold in the bathtub just above and around the drain area. Unfortunately the tub has Ben painted previously. I've tried everything. Ajax, bleach, a stone, gels, you name it. It keeps coming back.

[@stevefoster5490]

I bought this on your recommendation and the mould came back in 3 weeks!!

[@SkillBuilder]

Give it another go. I have not seen the mould return on the shower I did so we need to think about the difference.

[@psychocyclonus6909]

Great channel, I use small amounts of bleach soaked into rolled up tissue and stick to the sealant. Works a treat. I have silicone with a slight tint of yellow thats only a year old. Does this indicate poor quality silicone? I have not used the above method on said silicone.

[@SkillBuilder]

We have a video on that very method.

[@JACKATTACKED]

Dow's my go to and mapei.

[@gdfggggg]

I love Mapei products, their grout is the best in the business.

[@064kimc]

All due respect to this video,but is he actually spraying the shower?? As when it shows him spraying,there anit no actually spray coming out of the bottle or is it my eyes playing tricks on me ?.

[@bentyrrell8083]

Home owners should be using a window squeegee to wipe down shower surfaces after use, it takes seconds and will help stop mould forming

[@Taz6688]

I wipe the walls down and put a dehumidifier in there, open the vents and crack the window open, still got mould around the window, I feel its now in the plaster board, new build only 5 years old, built to latest specs, but probably with the cheapest materials they could find, using a dehumidifier and having the vents open, still have to wipe every window down and keep cleaning around the windows to remove mould, modern builds are rubbish.

[@marischoles5910]

I love this product, have a 450 year old cottage with a 250 year old external bathroom and lavvy plus cool store Trust its well ventilated with limewash walls, ceramic floors and its cold I also use an electric window washer every time I shower or bath This has a jacuzzi, underfloor heating and rads It is the only product that has ever worked

[@maxv77]

Heard you on the radio today. Great advice as always. You mentioned an app to see the heat escaping from your home. Do you have a link for the apps you would recommend? Cheers

[@SkillBuilder]

It was an infra red camera that plugs into the bottom of your phone, The one I was using was the Topdon TC001. It is only for windows or an android phone but they are making one for I phones. It was dead easy to use but I am sure it is not as accurate as the £1,000 models from Flir. That said it did show up a lot of cold spots particularly window frames.

[@mule666]

That is a dust ask... That's not going to help for fumes.. Or poisen lol

[@dd-yg3cx]

hi we are just putting in a new shower room and are fitting shower panels instead of tiles. should we use elements board first or aqua board ?

[@SkillBuilder]

You can put the panels on anything provided the joints of the board are sealed. It would not harm to use moisture resistant plasterboard, maybe with a coat of tanking fluid from Everbuild as belt and braces.

[@webbyjamel2702]

Sorry Rodger but the last shot is new silicone which is misleading.

[@akaski777]

Bleach water mix spray

[@gbrown355]

I use transparent candle wax to STOP it in the first place..on grouting, etc...just cheap tealights dragged and rubbed in to silicone and tile grouts... you all gotta calm down with this heavy not needed chemicals...

[@Nojnasaam]

Can I use this to remove mould from the underside of roof felt in the loft?

[@matthewwakeham2206]

It'll probably damage it. Does the roof space have good ventilation? Shouldn't really be any mould.

[@changeagent228]

Black mold is crazy. The whole ceiling in my bathroom is covered and the artex is peeling off. I tried sprays and all sorts even a UVC light which works quite well but it always comes back.

[@marischoles5910]

Artex has to go lots of crevices if you have a mould on ceiling issue Cheap to do Paint ceing with Polar Paint, its awesome Replace grout with good quality antimould grout Have the extractor in the shower area Use a dehumidifier at the door Open windows instead or as well as Remove any loose grout Use this product as described and then regrout using an anti mould grout I have a 450 year old cottage with an outside bathroom

[@gdfggggg]

It’s the moisture condensation on the surfaces that the mould lives on. The surfaces are cold and there’s excess moisture in the air. Loft insulation would be a good start to insulate your ceiling from the cold air and a decent extractor fan to remove the moist air. The walls can be lined with PIR boards but that’s a different ball game when cost is a concern. You shouldn’t get any mould but if the surfaces are cold and there’s lots of moist air then it will be an issue.

[@matthewsellers82]

Get rid of the Artex (or get a professional to, some of the old Artex had asbestos in it); get down to a smoothish (wipeable) finish; wash everything down with bleach solution; let fully dry; seal everything up with something like 1.2.3 primer; use a specific bathroom paint with anti fungal additives; be prepared to touch up every other year after wiping down with bleach solution; try and control humidity in the bathroom even if it means leaving a window open after a shower.

[@tikaanipippin]

Just apply thick bleach with a paintbrush neat, don't dilute or spray, and leave it to dry, with window open and door closed, heat off, overnight. Extractor fans and heating do not work as well as cold fans which accelerate evaporation and drying of surfaces blown by draught from fan.

[@changeagent228]

Wow thanks for all these great suggestions. 👍🏻

[@analogdistortion]

What's a good quality tube brand?

[@SkillBuilder]

Dow Corning or Forever White.

[@MC-ip8gb]

White wine vinegar destroys the mould.

[@daveg6948]

Will this product damage chrome Roger?

[@SkillBuilder]

I don't think so but I will test it on some old taps and get back to you

[@daveg6948]

@@SkillBuilder Thanks Roger

[@tednruth453]

Dry everything off with a microfiber towel after a shower, takes 1 minute. Job's a good un.

[@grrinc]

I fit bathrooms and tell all my customers this. Vents to pull out the humidity, soft towels to mop up excess surface water, keep wet towels, clothes and floor mats out of bathroom too.

[@theexpertmaskmakerofwatfor8504]

Doesn't it destroy the grout over time?

[@Mitch-uy7wy]

So you are now the Radio 2 Plumber??????? 🤔🤭😂

[@abrandals93]

Buy a silicon that is mould resistant?

[@SkillBuilder]

They all claim that but it is not the case.

[@gc19901]

i use hydrogen peroxide for this job as it's natural and keeps the toxic chemicals away from my skin .

[@Napoleon-Blownapart]

Dry the shower down after each use, ventilate, no mould. Prevention always better than cure.

[@SkillBuilder]

Do you have kids? "don't forget to wipe the shower down afterwards" deafening silence.

[@tonymcfeisty2478]

keeps the shower looking cleaner too

[@gdfggggg]

@@SkillBuilder I kept telling my boy to pull the shower curtain against the tiles to keep the water from running down the outside and now after a couple of months of ignorance I have a hole in the floor 😂

[@tikaanipippin]

@@gdfggggg Shower cleaning sprays contain detergent and lift soap scum and limescale residues out of droplets on tiles etc., to run down the wall, shower screen or curtains and into the bath or shower tray. Don't rinse off with clean water which leaves droplets to dry and deposit more scale. You could make your own spray with dish washing detergent and white vinegar if you like, or apply with a cloth.

[@troyboy4345]

Some say Roger uses this product for his toenails ....

[@BenMitro]

Now then, its time to show us how to remove that crusty old silicone!

[@SkillBuilder]

Next video

[@BenMitro]

@@SkillBuilder Waiting with bated breath (or is it baited breath?)

[@waynekerrr9027]

Is this an advert , after supplier has given this guy a loada cash to advertise it. ?????

[@dennis6442]

Skill builder was formally a consumer rights advocate/journalist, I doubt he would promote a product he did not have full faith in.

[@benclarke8699]

Probably, but whats wrong with that? I think he cares about his image and this channel enough to not endorse a product that doesn't work. Comments are open so it wouldn't take long for the audience to call him out. Nothing wrong with advertising and making a living.

[@Syltibob]

Probably. The finished shower in the end don't look like the one they start in.

[@ricos1497]

@@Syltibob yes it did.

[@waynekerrr9027]

@@benclarke8699 well yes it does actually..I like the guy too, however how can he possibly endorse the product , if he ain't used it many years ago to see that it's worked it's magic today..I can sell you a pot of magic beans that will grow into a beanstalk to the moon in 10years ..you can buy one for 100 quid....it really works.....please send me the cash as soon as possible..thanks.

[@dianaburton2060]

The reason rich people don't have mold in their bathrooms is because they can afford to pay someone else to clean them.

[@pottywotty100]

Way wrong mask

[@Stuart.Branson.]

Lol Rich people have cleaners, not chemicals

[@srslam1347]

Frels like an ad dont you need to disclose?

[@ricos1497]

It says "Includes paid promotion" when I watch. Not on yours?

[@srslam1347]

@@ricos1497 didn't initially

[@davehornet6]

Easy answer to mouldy silicone. Stop using silicone. It is absolute garbage. More often than not i can just pull it out! I have replaced dozens of mouldy silicone shower/bath seals with "Soudal Fix all" high tack acrylic adhesive/sealer and it still looks new years later👌 first used 3 years ago and its a regular customer (as are several others) so can see how well it looks down the line. Only downside being it comes in white (which really stays white unlike others), grey, black and brown only!

[@livingladolcevita7318]

sack the tiler🤣🤣

[@SkillBuilder]

He is long dead and beyond your vengance

[@livingladolcevita7318]

@@SkillBuilder 🤣

[@philsinfield4665]

sorry your mask looks US

[@SkillBuilder]

No mask I get done, mask I get done. It is really only there to protect my mouth from the spray, the fumes are not that bad and the extractor fan is above the shower

[@Taz6688]

@@SkillBuilder If you do use a mask use the right one, that mask will stop nothing, I just did round my bathroom window, it took my breath away, my fault as I had no filters left for my mask.

[@willtaylor6112]

Thanks for your video, I watched it years ago and student accommodation sites with 1000 rooms going around with weedkiller sprayers full of bleach and rolls of blue tissue paper. Saved re siliconeing all the showers every year and some showers would have black mould in all the grout and the silicone. White Vinegar would help speed up removing the mould but makes a lot of chlorine fumes and clean the mould in hours

[@jonerlandson1956]

look... if people would build correctly that wouldn't be a problem.... i can smell drywall in the air...

[@kcaj4871]

Oi!