Mounting New Wheels And Tires! || Dodge Dakota Overland Build Series

Hope Your All Getting Out-There!
Don't Forget To Subscribe For The Newest Videos!
Welcome back to the series everyone!
In this video we continue the time crunch to prepare for the Southeast Overland & Offroad Expo!
In this video we reveal our tire selection and finally get our new wheels and tires mounted up on the Dakota Overland Build! I replaced some suspension as well but we wont talk about that, haha! Definitely a late night but so worth it in the end.
Really excited with how this truck is coming along and super excited to share it all with you guys!
Thanks to supporting communities!
/ dodgedakota
/ dddn2014

[@JT863Media]

Where'd you get your fog lights?? That wheel and tire set up is a thing of beauty

[@sinbad1219]

Looks awsome man! I bet blacked out headlights would look great on it too👌 if your looking for something extra to do on it

[@Al.Venture]

That’s an idea! I’ve been digging my clear two piece but the headlight is starting to yellow🙄

[@kellyembrey6321]

It looks pretty awesome man I like that truck and it looks good are you gonna bring it to Kingsville sometime soon

[@IvanShulgamzfk]

Looks amazing, mate! Is your truck lifted or in stock? Would like to place 33×12,5 on mine Dakota but have doubts 'bout are they fit on stock suspension

[@brandonrobinson8250]

Ball joints

[@dylano7242]

I didn't go that big of tires 275 70r16 michelin all terain and so wouldn't Sucks down mpg horrible. 265 75 r16 ,275 70 r16, 285 70 r16 , 285 75 r16, 265 80r16, 255 85r16 all fit we'll on these trucks. Being a pickup longer wheel base a narrow tire is better and will get better mpg paved roads.

[@frosty116]

new sub here, you have a clean build going man. i have a 2003 quad cab that i will be doing a 3' leveling kit towards end of summer, and after seeing those upper n lower control arms you did has me thinking i should do that as well. much like you, i want mine purpose built. fishing n hunting is mine, but i all also wanna jump on the whole over landing train. anyways just wanted to say, nicely done !

[@Al.Venture]

What motor do you have?? And yeah I’m up to 245k mikes so some maintenance like new control arms really helps these old trucks👍🏻 I’ve only just begun overlanding and it has been awesome! Where are you located? If you can camp on the beach for a weekend, catch and cook your food, you’ll be hooked! (No pun intended)😂😅

[@frosty116]

@@Al.Venture I have the 4.7l, just hit 169k this week. been a solid runner so far with no issues. im located in So. Oregon,approx 30 miles N. of Cali. border

[@Al.Venture]

Oh sweet!! Keep up with the maintenance and it’ll run forever! Gotta be careful too with all that salt up there!

[@frosty116]

@@Al.Venture oh, no doubt. luckily we dont have to worry about salt here. odot uses a red rock on roads when they get icy.

[@Al.Venture]

@@frosty116 I’m so jealous, coming up I’m gonna have some videos on rust repair😅 even though I’ve been in Florida, the insanely salty roads back home took their toll. Is the red rock what it sounds like? Just fine gravel?

[@calebholmes1575]

Could you do a video on all the specks of your lift

[@GTMemes2]

Just switch the grease nipples Im pretty sure they are threaded Problem solved

[@joshtroyer429]

Also need the link for the suspension

[@TheKalsmith4]

What did you have to do to free up the torsion bars?

[@Derringer-su6he]

Where did you get that roof visor ?👌👌

[@Al.Venture]

Hey man! It’s from a the company “Lund” this one specifically is called a “Lunar Visor”, they made 4 different designs for our truck. I’ve considered making a video on the install but also if you reach out on Instagram I can send you pictures or anything! @Alex.Reinhardt

[@treyholliday7592]

Very nice set up. What gears you running with those?

[@Al.Venture]

Thanks man! I’m running the 3.55s rn but I have a 3.92 front diff in my garage, I’m considering going with 4.11s if I have to rebuild an axle (but I’m trying to find a 3.92 9.25” rear axle with disks brakes to match the front I have rn)

[@treyholliday7592]

@@Al.Venture those disc rear with 3.92 gears are really hard to find. I. In kansas and have been looking for a year. Any I have found are $600 or more. I am debating on doing gears myself. You can get ring and pinion for font and rear on eBay for $450. They offer 4.10s and 4.56s. I am debating 4.56s cause I have the 4.7.

[@Al.Venture]

I haven’t looked into what ratio would be best for me, k figured I’d just start with 3.92 considering that’ll let me also go to the stronger read end (and LSD) as well as being just bolt in. And from there decide if I want more

[@Al.Venture]

There is a guy selling 4.11s right now front and rear but it’s in a 8.25 housing instead of the 9.25 and it’s drum brakes still

[@hernandavidnavarrosanchez5207]

⁠@@treyholliday7592 hello bro, I hope you can help me, I have a Dakota 2000 3.9 4x4 I used it for fishing in really soft sand, can you pleas recommend me If is any upgrade on ring and pinion to improve capacity on the sand of the 4x4, thank you

[@joshtroyer429]

Can you give me the link for the wheels?

[@GLJKins]

Just change the fittings.

[@luisenriqueleonsolis4161]

Que medida son los neumáticos?

[@micahdesalvo4492]

what lift do you have on it?

[@razorfame9523]

Are they offset any so they don't rub

[@Al.Venture]

So this is a 0’ offset wheel however it sticks out about an inch more than stock did with same size tires (Falken wild peaks) not sure if maybe the true width is more or why that is. But so far it only rubs when full lock, i did lightly trim my bumper and pulled back the wheel well liner a bit though

[@razorfame9523]

@@Al.Venture thank you I've been having the same issue with the squeaky so I'm going to check out that company. I got the same truck with the 3.5 inch lift and 33s but I had to put spacers on mine. It's hard to find good off road parts for the truck

[@Al.Venture]

I agree! I plan on adding fabrication to the channel and hopefully I’ll be able to start distributing some much needed offroad parts to us dakota/Durango enthusiasts 🤫

[@MrAdanhortelano]

Hey are those stock lower and upper control arms? Or did you have to change it also for the lift kit?

[@fscottgray9784]

I have been running BFGs KM3s 33s like yours for about 10 years. I have 4.56 gears and a 360. I bought my Dakota just because it had a discontinued lift.kit but needed a motor. CBI did a full set of custom bumpers, rock rails and roll bar. Love my Dakotas.

[@xA18kND1x]

The Dak community needs the specs man! lol Where'd you find Methods that fit the Gen 2?

[@ocavant]

Srsly. The Fakota pattern is HTF!

[@silver_trek_AWD]

Dodge looks great I just picked one up it's a 2001 any idea what the bolt pattern is?

[@Spoolingturbski]

6x114.3

[@rossfricke2010]

@7:13 I finally started paying attention, looks good 👍

[@08buck1]

Looks awesome! I just inherited my dad's 2nd gen sadly, it's gonna need a fair amount of cutting and welding due to rust but it was his last truck so ima do it. Definitely going for a overland build.

[@GTMemes2]

Gold rims went out in the 1980/90s But you do you, I just hooked up my 99 5.9 durango with kenda klever MT2 nubbies What size are those news tires? 33?

[@ocavant]

LOL. That squeak is one of the lower ball joints. Been there done that. Yes torsion bars have to come out the front. What type of lift do you have on this truck?

[@jaycamacho8179]

How much slower does the truck feel after the tires/wheels?

[@yng.marlon]

I have a 04 Dakota, My right wheel touches the plastic rivet and not the left side, what could it be that causes the right wheel to touch the plastic rivet?

[@jjjo7352]

Awesome dakota man. Ive got the same squeak from my 01 dakota and im dealing with it to this day, Im about to change EVERYTHING out too and just like you said its going to feel so good to not hear it anymore. I love 2nd genz. Is there a leveling kit or lift on your dakota to clear the 33s and if your dakota came as a 3.55 did you have to swap to 3.92 to move those tires easily or does the truck accelerate as normal with 3.55 gears ? Im planning on also buying km3 tires after I seen how great they match.

[@Al_mutlaq]

لحية على الفاضي، الله يزين سريرتك مثل ما زين ظاهرك

[@Al.Venture]

Hey! Sorry but I’m not sure what that means, I tried googling it but no luck😅

[@leightonreese1832]

Looks great!! I've been overlanding my 04 Dak on stock suspension and wheel size, once came dangerously close to high centering it I want larger tires but need more clearance first up front What upper and lower control arms did you install on your front suspension? are they just stock with a re-indexed torsion key? if so are your ball joint angles under stress? or do you have something different up front?

[@Al.Venture]

Hey! Sorry for the delay but we’re back and got content on the way🤘🏻 how have you been likening the Dakota platform?? And I went with a MevoTech full kit (sourced from rock auto) and yeah exactly I have reindexed keys and 3” cast iron blocks running on 33s.

[@Al.Venture]

As far as ballpoint and cv angles go I stay very conservative with my suspension. Due to the way torsion bars work, preload = Lift, I see a lot of people that crank the hek out of their torsion keys to get nice lift but then there’s no down travel, suspension is on the stiff side, and all the angles are very aggressive which can greatly shorten the life of the joints/ axles. I believe I keep my truck at about 1/2-3/4” away from the “full droop” bump stop. It’s given me that sweet spot of good on road/off-road performance while also keeping the suspension healthy and comfortable

[@humblegrayman7651]

Incredible man. You sir have one of the best looking Dakotas out there 🤙🏾

[@Al.Venture]

Thanks a lot dude! A lot more to come! Lord knows I’ve had hundreds of ideas in my head for this thing, so I’m excited to finally get them going. Do you have a Dakota too or what do you drive??

[@humblegrayman7651]

@@Al.Venture Yes I have one as well. 3.9 4x4 5mt. This vid actually gave me some motivation to bring my truck back to life. I’ve been stuck on which brand to go with for a front end rebuild. Think I just found it lol but my goodness.. them method racing wheels 😩 have you considered a camper shell? Oh and I found you from Reddit lol

[@Al.Venture]

Dude I appreciate hearing that! Definitely go work on your truck! And thanks man! The wheels are soooo nice and the tires grip and sound amazing, I can’t wait to get her in some real mud

[@Al.Venture]

And I have thought about camper shells but I love the look of it being a pickup still. In the next video (TOMORROW) we start the sleeper setup and youll be able to see what we got planned to give us sleeping space but also keeping the “pickup-look”

[@samuelherman4859]

You should change your Heads and tail lights

[@fortis619]

Been thinking of buying a Dakota , I sold my Tacoma when the prices were high bought a Camry for commuting , I want another truck 😅, looks great

[@christianmercado2357]

🔥🔥 trucks looking good glad to help 👍

[@Al.Venture]

You were a huge help! Great meeting you man! Definitely coming back for that AC recharge too😅

[@tittosolano3462]

What are sizes? Rims and tires?

[@rayray7960]

Would like to see walk around an going over the truck I have a 03 Dakota an really like how yours is set up

[@Al.Venture]

Actually that’s coming up! So next video is gonna be me taking my truck to the SouthEast Overland &Off-road Expo, and then afterwards I’ll be doing a video where we touch base and talk about the truck and how each of the improvements we made performed! It’ll also be talking about some improvements were going to be making which will also foreshadow future projects for the series🤘🏻

[@gettinintonature3350]

My Dakota squeaks also, drives me insane. Just got my new torsion keys and 3" blocks for the rear. Can't wait to get these in. Probably will still squeak until I get new control arms and bushings. Getting redundant always having to spray the front end. Nice work on your Dakota !

[@Al.Venture]

Hey thanks! Sorry for the delay but how’d your truck come out? And I definitely agree the squeaks on these trucks are insane😂 definitely have to always get greaseable joints!

[@gettinintonature3350]

@@Al.Venture my turn to be sorry for this delay. Got her jacked up couple inches looks and feels pretty good, but that dam squeek like noise is still there. I do believe its in the sway bar bushings tho that have no place to be greased.

[@bikesandbangs]

Yes, you are correct on it being the sway bar bushings. I have owned 4 of these Dakota's. The sway bar bushings is what develops the squeaky noise. Replace those with some poly ones and you'll never have a squeak again

[@robertshriver8392]

How much did the wheels cost?

[@corbanhardy]

What lift kit did you install?

[@c2protect]

I built my Dakota on to Dana 60s coil overs and custom frame as well. 37" tires.

[@ktegra8238]

What’s size are those rims

[@WestDesertRc]

What size wheels

[@ma119107]

Tire and wheel sizes please???

[@koarodriguez5723]

I have a 2005 dodge Dakota that I use for hunting. Problem is that it sits really low. What would you recommend to get more ground clearance? Suspension lift?

[@Joe.Has.A.Ram2004]

I would, just don’t cheap out on the parts

[@projectdirtbikes]

Nice looking Dak!

[@ogcowboy5743]

My 2000 Dakota Quad Cab squeaked badly too, so I sprayed every rubber suspension, steering and body mount point with silicone spray and the squeaks were gone.

[@Al.Venture]

Aye man! If the rubber bushings are worn out just spray some more rubber on them😂 but for real, it felt so good to replace these joints. I fixed the u joint too so now there’s no clanking or squeaks, feels weird driving my truck with only the exhaust noise😂

[@FPdesignfab]

How much lift is this kit? Does this lift include new torsion bar keys? or does the lift come from the new swing arms? Do you have any body lift on it? What size are the tires? I have a 01 Dakota I've been wanting to lift but haven't found a good solution.

[@notatacoma7621]

Nice choice! Looking good!

[@Al.Venture]

Thank you! Like wise! I see that bumper in your profile pic, which one is that??

[@robertvilliard3402]

Nice job. I have a 02 Dakota and I had new springs made for the rear , it raised it 3 inches, the front I put a 2 in puck under the front springs, wrong way , now it's way too stiff. It's not a 4x4. Is there A arms and springs n shocks out there to raise it properly 2-3 inches? Could I use 4x4 A arms like the ones you just used? Please get hold of me on messenger pm me your number so I could ask questions. Thanks Bubba Villiard

[@derrickweaver5390]

Hi, thanks for what you're doing and capturing! I have watched some of the vids, but can't recall what lift you currently have on the truck. Is it lifted?

[@Al.Venture]

Hey thanks a lot! I love these kind of comments! So I only have a torsion key lift and I think 3” blocks in the rear, the rear blocks are cast iron though (harder to find and more expensive than aluminum but I broke aluminum before I even started off-roading the truck) Right now shocks are kyb which have been great but definitely need replacement, that’ll be another video down the line!

[@Al.Venture]

Also! The wheels and tires are 305/70/16 KM3s wrapped around method race wheels, 16” 0 offset

[@derrickweaver5390]

@@Al.Venture Thanks! I'm going with the 3" key lift as well, and will look for the cast rear blocks. I have the crazy squeak in the front end as well, only in the cold, and after a full Moog front end rebuild it remained. Next, changing the sway bar bushings to see if that's the culprit.

[@Al.Venture]

Did the ball joints come greased already?? I always try to get the ones with the grease fitting, all my new stuff is mevotech. These trucks ain’t too bad without sway bars (mine isn’t on rn) but I’ve heard ppl say they can be tough to get back in, maybe do that while you have the torsion keys out

[@brokemansgarage1087]

Does your truck have a lift or body lift or is it stock

[@Al.Venture]

My trucks got a 3” suspension lift (torsion) with 3inch blocks in the rear. Do you have a Dakota too?? Personally I try to stay away from body lifts

[@brokemansgarage1087]

Yes I do. I like how it looked and been wanting to overland build mine

[@Al.Venture]

What kinda Dakota do you have?? They’re great trucks for this kinda stuff!

[@brokemansgarage1087]

Exactly like yours just bottom trim and fender flares are grey

[@Al.Venture]

Oh I’ve seen those two tone paint jobs before, it’s a pretty good look! Gotta lift it and get some tires now!

[@pegasustecnologia7755]

Nice Video :3

[@Al.Venture]

Thanks a lot! I continued the series with more videos recently, in the last one we make a custom tent to work as a pop up camper for the back! Next video we go to the SouthEast Overland & Off-road Expo!

[@vinniedimodica8705]

How much lift is there on your truck? Looks lifted.

[@Al.Venture]

Hey! Sorry for the delay I’ve actually been sick 🤒 but yeah it’s got a 3 inch cast iron black in the rear and re indexed torsion keys in the front! I love the way it looks and I keep the front suspension kinda soft to help off road

[@aaronkapustinsky6062]

Looks awesome dude! Makes me miss my old Dakota lol

[@Al.Venture]

Thanks a lot man! What kinda Dakota did you have? Idt I could ever sell mine😂

[@loganshenk6645]

I was loving the video untill you put the lugs on with that auto wrench. Probably alright, just made my heart drop

[@rowdy5.9L]

What lift do u have? I have a 04 Dakota 2wd and trying to have stance similar to yours. I have a 2.5 inch leveling kit but haven’t installed it yet. I want taller, wider, beefier look.

[@stephs1571]

HI! I've just got me a 3rd gen Dakota! You have the look I'm going for. Please put more details when you build. Thanks!

[@rayvelasquez778]

Hello there great build! Would you be able to send me info on the control Arms and ball joints? Is the Mevotech better for the 4x4? Thanks in advance!

[@adamm3507]

Whats the lug patten / wheel specs looking to get this setup on my 03 durango

[@glm88]

Does your engine torque die with those tires? Do you have 4.7, 5.2 or 5.9?

[@fakename8177]

Do you know what brand of tonneau that is? I have the same one and can’t find anything about it??

[@Sly_oner]

i just regreased the sway bar got rid of the squeak

[@royolao10]

Hi Bud , where did you get the suspension kit?

[@Al.Venture]

Hey! Sorry for the delay, been sick😭 I actually pieced mine together, I have re-indexed torsion keys up front and 3” cast iron blocks in the rear, the aluminum ones somehow broke on me and that was before I actually took the truck off-road

[@flt458]

Are you running a lift of any kind?

[@Al.Venture]

Yep! Running re-indexed keys upfront (about 3” of lift) and I use 3” cast iron blocks in the rear. Fits 33s pretty well!

[@jeffreyyeater1780]

Those wheels look killer .

[@crs_19_irock31]

I cannot wait for your next video on your dodge dakota

[@lukehall4400]

Did you re-gear for those tires?

[@Al.Venture]

Hey, so no not yet, currently my truck has 3.55s with a 8.5 rear end. However, I was able to source a 3.92 front axle and just found a 9.25 rear end with disk brakes, I think an LSD, and hopefully also 3.92. I plan on pulling that axle and installing them both (of course making videos of the install along the way). And then if I decide I want a locker or bigger gears I’ll go from there, rear disks and a bigger rear axle though is a must for building a good foundation👍🏻

[@2k_Ferg]

Any links ? These look hella nice 👍🏽

[@Al.Venture]

Thanks a lot man! I don’t have a link rn but I’ll have a build list going into my bio on the Dakota videos soon since a lot of people have been curious! What specifically are you looking for??

[@lucylemen2145]

Some grease would help that squeak, its a lot cheaper too

[@dkhadikin6629]

Your Dak looks killer! What torsion keys did you install? I'm looking at doing a front end rebuild on my '04 and would like to add a couple inches in ride height so thinking of changing the keys out at the same time.

[@Al.Venture]

Thanks a lot dude! First what kinda Dakota do you have? And I have reindexed keys, I’m not sure what kit they were out of since I bought them separate. There’s a couple kits out there that come with keys and blocks however I definitely recommend staying away from billet aluminum lift blocks, I had one fail on me years before I even started going off road 🙄 Also what size tires you looking to run?

[@dkhadikin6629]

Mine is an ‘04 Sport, 4.7. Was an ex fire hall truck so well looked after, no rust! It is starting to sag a bit up front, torsion bars have been turned to raise up a bit. Was going to do the Mevotech upper and lower control arms along with the 1-3 inch keys from Supreme Suspension to level it out. I’m just looking to clear 285’s with no rub. It’s my fishing rig and would like to make it a little more bush worthy! 🤔

[@Al.Venture]

Oh that’s sick! I actually was a firefighter before I moved! I loved it, but yeah the trucks get taken great care of! Sounds like a sweet deal!

[@Al.Venture]

Also you should be fine running that size tire, I’m running 305/70/16 and they fit fine, I had to trim the bumper a small amount and tuck the fender liner a little bit but it’s been great, bigger tire gives you a lot of confidence too

[@eduardofajardo6168]

Lastima que no salió el video de como quedó la nueva suspensión

[@Al.Venture]

¡Oh, la suspensión fue solo una actualización general! Compré un kit grande de RockAuto by Mevotech, eran brazos de control y tirantes completamente nuevos. Nada lujoso, solo articulaciones nuevas y supuestamente más fuertes, dice Mevotech -Google Translate

[@eduardofajardo6168]

@@Al.Venture Your car is very nice, it looks very aggressive with those tires... congratulations, excellent work. My brother has a 3.9 L. 2001 Quad Cab

[@kellyembrey6321]

What is so sick about it is the tires the rims what?

[@GLJKins]

Fantastic, would love to put these on my Dekota.

[@jeffreyyeater1780]

Hows the gearing ? Still acceptable?

[@samuelherman4859]

What Size of tires and wheels you got bro they look awesome

[@Al.Venture]

Dude thanks alot! They’re 305/70 R16 I believe, I’ve ran this size for years however I think the KM3s are a little bigger than my Falken WildPeak at02s I just took off

[@samuelherman4859]

@@Al.Venture awesome keep up the good work

[@Al.Venture]

Thanks dude! Just uploaded a new episode of a separate series on my channel, next up will be me Going to Southeast overland expo with the Dakota to see how she performs as an overlander!

[@camjohnson2630]

Lets see your exhaust set up

[@Al.Venture]

I’m gonna be making a short showing off the exhaust! It’s pacesetter headers with a flow master exhaust coming out the side, the 3rd cat was deleted (it actually deleted itself💥) and replaced with a dump valve!

[@vadeshoulss1179]

Where’d u get the lift?

[@Al.Venture]

So I actually bought my lift off someone on Facebook, it’s just reindexed keys and then I got cast iron blocks for the rear. What are you looking to do with your Dakota??

[@logansmith6989]

Did you do a diff drop by chance and if so how did you do it?

[@LzrBlnt]

so nice love it🧡

[@Al.Venture]

Thanks a lot! I see you have a Dakota too? What’s the specs on her? 👀

[@LzrBlnt]

@@Al.Venture 3.9 4x4 manual she gets me everywhere I need to go!

[@Al.Venture]

Heck yeah dude! I had a 3.9 and I loved it, lasted me 217k and that’s only bc I swapped it out because I wanted a 5.9, those motors will go forever! Having a manual is probably a lot of fun too

[@microtechmachineshop]

i need a cheap beater truck like this

[@isaactm9805]

what suspension you running?

[@pohoholoholo5712]

Any idea on the mpg with the new upgrades?

[@dmitripetrov5536]

What is the size of the new tires?

[@alysonryan-gilbertson1031]

Sick truck!

[@Al.Venture]

Thanks a lot! Gonna get back to regular uploads, sadly I had to take some time off but I’ll have plenty more content coming soon🤘🏻

[@tomlee8547]

This would look so good on my gold durango as well

[@johnnyt123456789]

Is that dakota pre 2000?

[@ZjOverlander]

What did you use to lift it

[@isaactm9805]

love this vid!

[@miketries8251]

Comment

[@Al.Venture]

Best comment to date, 10/10 🤘🏻

[@miketries8251]

@@Al.Venture Reply

[@Al.Venture]

@@miketries8251 ladies and gentlemen men, the man is back and he has done it again! 10/10

[@cesartoledo7201]

Fantástica

[@xcel24]

What method rims are those ? Model

[@Al.Venture]

Hey dude! So they’re method race wheels, MR315😍

[@xcel24]

Thanks brah!

[@Al.Venture]

Yeah dude! Are you building yours for off-road too or what’s the plan?

[@xcel24]

Mine is actually all done . Just need to add some new rims and tires ! My is a 2wd 2002 dodge Dakota with 3” lift kit . Took it everywhere . It made it out of Death Valley in one piece lol

[@Al.Venture]

Heck yeah dude!🤘🏻 that’s sick, I have family in AZ, i totally want to bring my truck there after visiting a few times. Have you seen that 2wd control arm lift kit for out trucks??

[@movementonwheels]

She looks incredible 😩!! Jealous on the km3😌!! A great looking tire! Your giving nostalgia from when I first put wheels on mine. Such a hard process finding wheels!

[@Al.Venture]

Thanks a lot man! I love how these look and drive! I can’t wait to find some mud and really have some fun! What kinda wheels do you have again??

[@movementonwheels]

@@Al.Venture sendel locker is the model. They are a smaller company but I think that wheel is discontinued . They are more commercial.

[@Al.Venture]

Damn! Gotta be careful now, finding a replacement will be a nitemare, if I ever decide to get a spare tire carrier I’ll have to get a matching spare

[@samuelherman4859]

Nice Truck bro I have one 2004 crew Cab

[@Al.Venture]

Oh sweet! That’s right before they changed to the new body style, do you off-road yours too or what’s the plan?

[@samuelherman4859]

@@Al.Venture nah bro I just Got a 2018 Ram 1500 4x4 want to lift about 4 inches and put some 35's on it haha

[@hornycrab176]

I just got my Dakota about a month or two ago and I want to make an overlanding setup. This is gonna help a lot. Thank you