Will 33's fit!?

[@johnkreiter9757]

Crank torsion keys gain 1 to 2 inches in front

[@sam2753]

They look great but yeah, too big for a stock suspension. But hey! If you are going in a straight line it'll be great! 😜

[@prestonblaineroddam7986]

Can u fit 33s on stock suspension YES. With some metal trimming and the front bumper trimmed yes or just crank ur front keys to hav to cut less

[@KevinFromCalgary]

They would certainly have a better chance of fitting if they were on rims with the proper bolt pattern, not requiring a spacer between the wheel and the hub. The OD of the tire isn't the only factor in "will it fit?"

[@ericfranklin4117]

Looking good OG

[@sherryhulsey3158]

Yes you can Phillip. Take off the front bumper skirt. I realize the rt skirt looks cool but for the sake of the test, off it comes. Remove the fender flares, if possible (on the slt plus 4x4 they come off amd add 2 inches of clearance), and take off the rocker panel/side step fairing. trust me, youll want to leave those off it gives you a more visual look of ground clearance and it looks like it should have been that way fdom factory

[@Stonks93]

Sherry Hulsey thinking about taking off the fender flares and running boards off my 02. How much of a job is it to do? Barely got time to do it but I’ve seen em without the flares n steps and it looks amazing

[@remier22]

@@Stonks93 if you haven't done it yet, it's pretty straightforward for the steps, id use a cordless impact with a 3/8 socket adapter, makes it a ton easier, the fender flares on the front held in with both a fastener and double sided tape, just use fishing line and goo gone and you'll be good, the rear has plastic rivets, take a hammer and a nail and pop the center through, then all that's left is double sided tape again, and the door flare piece is just double sided, my videos show what mine looks like without flares,steps, and door trim

[@jdunn85]

On my 2001 durango RT 5.9 I have 285/50 R20 and thats realy close to rubbing .

[@robertolugo6415]

I got some 22s you think 285 45 will just right

[@mitch5077]

If you did a little cutting would they hit inside the well? I want to do that to my Dakota Sport, I think factory it sits higher.

[@Montoya1991]

Noticed this guy bolted on the adapters/spacers with the gun, he probably had a wheel fly off by now seeing this video is at least 2 years old

[@warclub2175]

I have 33” on my Durango no problems

[@goatedkota430]

Keeswood Productions how u get em to fit

[@RacersRUS69]

Ran them till he either ripped his tire to shreds or ripped off anything in the way of the wheel

[@allgasnobrakes4979]

I just put 35”s on mine with like 3 inch lift yes I had to do some cutting

[@zmill3325]

What lift did you find that fits a 2002 Durango

[@aaronwalters6783]

Scowered the internet for the last 3 months and have found 1 "lift" its just a torsion key and rear shackle kit from suspension specialists in California. I am thinking about just tightening existing torsion keys up 1 - 1 1/2 inches and maybe running 305's

[@turboboy0]

I liked it better with the stock wheels and mud tires.

[@8pyy]

Maybe idodnt think so

[@ronaldworthy157]

Yep !

[@joeyphillips1181]

Just put a little 2-3" lift on it and it'll be perfect

[@njddj8390]

What kind of rims are those?

[@pepeiann]

33s fit when I raised the torsion bars

[@kobemunn6508]

How high did you have to go? I'm looking for something subtle, just ordered 2" blocks for the rear, and am raising the torsion bars in the front, think that will be enough?

[@rileybecerril7554]

@@kobemunn6508 yes

[@papasavage8247]

I'm just squeezing 285/75r17s under mine temporarily or 295/75r16. Being I already have 16 inch and 15 inch rims but I cant find any 17 inch RT rims. I've got a 3 inch body on mine so it should squeeze them.

[@elijahthompson1631]

Papa Savage I have 285/75/16 on 3 inch suspension lift no rub even out bajaing

[@papasavage8247]

@@elijahthompson1631 my lift is body lift. But I would think that would make it clear better I'm not sure. I decided since the truck keeps fucking up I'm going to a bigger size anyway. I want something as close to 36x13.50r18 as possible. In metric size of course I just mean my diameter and width. I plan to run 18x12 -44s and have a very big wide squatty truck

[@BusyBeeLeds]

Well Daah. :) Did you try 31's?

[@nathaneller251]

31s are the factory size

[@bloneyo1]

Great Look, Just need to do a lift maybe get stronger axles.

[@Chanceyflexjr.]

Where did you get the wheels from

[@TheTferrer]

Do you still have the old tires? If so, would like to make an offer which will help with the lifting of the Durango. Thanks

[@davidhudson1290]

Bigger tires r a great addition...with a lift. Old rims looked a hell of a lot better. Adapters suck.

[@gibbles717]

Might wanna fix that oil leak before u do anything else

[@DPRyan-vd5pp]

Oil leak is probably a priority! Lol

[@seanrowland3481]

what size are the tires already on the durango?

[@zmill3325]

What lift are you gonna use and is that a 2002

[@dez3174]

Does it ride good sue to wheel extensions

[@dez3174]

*due

[@dez3174]

Lol nvm haven’t got to end of vid🤣

[@dantegrise2785]

I have an 03 RT with a 6 inch lift but wheel spacers not a way to go cause they destroy the axles bad

[@Cpennington57]

Shawn grise noted!!

[@JacobEcret]

I added 33’s with no problem

[@vidaljuarez6791]

How did u do it? I’m sure u had to cut , but what did u cut

[@JacobEcret]

@@vidaljuarez6791 this comment was a while ago, I have 3 inch lift. And I did trim the front to keep it from rubbing full lock and stuff

[@rcmc1256]

That's when he realized he just wasted all that money

[@zeuschavarria1263]

What did u end up doing with the stock wheels

[@barbaraflores2]

You need take running board and front bumper ok

[@3featherzthomas889]

Damn looked dope till it started to touch

[@zeuschavarria1263]

Do u still own them

[@chinoscars5655]

What size of tires we're they before??

[@JacobEcret]

Chino Scars 31’s come stock

[@damianhassel9176]

What tires and rims are they

[@jldfishing6622]

I don't know where you're at but hit me up if you want to sell them factory wheels

[@willmeredith8173]

Hey man question for you I just got a 2015 Dodge Ram 1500 Sport do you think if I do a 3.5 front leveling I can put 35 inch tires on a stock 20 inch rim

[@Jonathan-tb6fm]

will Meredith they will fit but you would need spacers for the stock offset.

[@jessicamoreno3729]

What size spacer are those,

[@quiktv1587]

jessica sanders looks like a 1 maybe a 1.5 inch

[@warclub2175]

Get some fenders man it’ll look better

[@Aqua350Lt1]

Why

[@GravelGuerrilla]

Get a thinner tire. You don't need lateral grip in a truck

[@argue3320]

With big tires like that you need to lift the SUV

[@Jonathan-tb6fm]

Argue no lift kits for these :(

[@bobtailsthecat]

I agree but they don’t have suspension lifts because of the rack and pinion 😭

[@prestonblaineroddam7986]

@@bobtailsthecat um just get a 3" body lift and crank the front keys and 2" lift shackels and there's 5" to fit 36s with some trimming and spacers there ya go simple....

[@bobtailsthecat]

mersades Benz fan the proper lift would be to have a suspension lift of course it’s possible to combine those two methods for 5” ...body lifts are shit and torsion cranking fucks with the geometry of joints and axles

[@prestonblaineroddam7986]

@@bobtailsthecat not really , just needs an alignment that's it..

[@Ripsaw17]

Rub city

[@tongl274]

Those heavier tires are gonna make the SUV ride like crap. Also, by changing the steering axis of the car, it's not gonna turn too well.

[@QuietWind01]

Bro fix that oil leak

[@chapaevv1]

31 мах

[@tylerbrooks3645]

Where did you get the adapters?

[@amcclaur80012]

Exactly. I need to know too. Save some money on rims