Mounting of ball-bearing full extension runners: Do-It-Yourself with Hettich

[@tarekammar1256]

I was confused before about the instillation of these as I am not a cabinet fitter, now I am totally lost after your explanation which is just short of all details about these runners

[@HettichEnglish]

Dear Tarek Ammar, thanks for your note, even though we are sorry to hear that. ;-) The video was meant to show "how to"; yet all the details about the different runners are documented in the ordering catalogues or manuals that come with them. (Depending on where you purchase) What exactly are your questions? Maybe we can help... Best regards, your Hettich KZbin Team

[@madnnessify]

How do can you remove/detach the drawer after installation?

[@HettichEnglish]

Hello, thanks for your comment. Once the drawer has been fitted, it snaps into place. If you want to take it out again, you have to place your fingers on the catch and pull on both sides. At seconds 7 and 8 in the video, you can see the spot where the mechanism can be unlocked. Kind regard from the Hettich Social Media Team

[@theot71]

Instead of drawer, is it possible to have a shelf. I want to be able to slide my electronic music keyboard from under my desk. Like a PC keyboard. Can I mount the drawer attachment to the side of laminated pine wood?

[@HettichEnglish]

Dear theot71, thanks for your questions! If you want to mount pull-out shelves to this kind of runner, you will have to "develop" some way of fixing: e.g. try mounting a slat to each runner and your shelve on top; also think of some kind of front panel so it looks a little nicer. A more professional approach would be using an undermount drawer. There are also runner versions made with extra 90° brackets to mount shelves. Check our website www.hettich.com > Products > Drawer runners or Drawer systems > Systems for office furniture. Mounting runners to laminated pine wood should be fine as long as you use screws that take the load. We hope this will help for your project! Best regards, your Hettich KZbin Team

[@scrie100]

Hello! I'm wondering if you have decided to do this and whether it turned out nicely? Without flexion?

[@harunatomijeje6411]

Hello, please what kind of runner can I use for pull over or hidden mirrors?

[@HettichEnglish]

Hello, thank you for your comment. You can use almost any full-extension ball bearing slide for the installation situation, e.g. as in the video, the KA 4532 with Silent System. For disassembly, you should make sure that you can still easily get to the unhooking levers later. You may need to plan a little more depth for this. Best regards, your Hettich Social Media Team

[@goodlooks3224]

Hello sir hame ye telescope soft close vli chahiye yha aas ps available Ni h

[@rajusaini3999]

Very nice

[@anna-kimharrison8795]

I need help fix drawers down please

[@HettichEnglish]

Hello! Please contact our customer service via [e-mail]. Kind regards, your Hettich Social Media Team

[@vijay.devotional]

Where can I buy genuine sliders online?

[@HettichEnglish]

In this case we kindly ask you to contact our customer service [e-mail]. Thank You!

[@vijay.devotional]

@@HettichEnglish is it not sold on Amazon.in? Some sellers are using your brand name but do not appear to be genuine.

[@kasarlamadhavi1828]

Good informative video do more videos

[@nicoteen9407]

This is a barely ok installation guide, but "John Heisz's 'Installing Drawer Slides Fast And Easy'" is oh so much more simple!

[@johnfleming8276]

Google I'm sure. I am the problem with viewing the installation video for Blum tandem undermount slides. I have not seen a video still that shows attaching the slides to either the drawer box or the cabinet. Please show me a video.

[@lostinmyspace4910]

The installation guide is not the problem. These are crap slides that separate. Don't even waste your money on this junk

[@nicoteen9407]

@@lostinmyspace4910 you prob had a bad set; not so in my case. I used these on a 70kg sliding kitchen mounted on my camping trailer. Still working perfectly.

[@emmasgrandma1]

Thank you. the instructions that come with these are terrible!

[@HettichEnglish]

Dear Ann Robertson,thank you for your note, great the video could help you.We just wanted to let you know that we have forwarded your remark to the colleagues taking care of the instructions that come inside the packaging unit. They will see what we can do to improve it.Best regards, your Hettich KZbin Team

[@parshurmkumar7974]

Hindi