Samsung Flip 3 Black Screen FIXED! Ultimate Troubleshooting ✅

Samsung Flip 3 Black Screen Issue: In this video, we will tackle a common problem with this model and show you how to fix it easily.
Hello everyone, I'm Leonardo, and today I'll teach you how to make good money when you come across this type of issue.
✅ Tools: www.movilone.eu
First, we need to check the charging of the device using the Power-Z tool. Once we confirm that it's charging, we'll move on to opening the device. We'll apply heat to remove both covers and use a suction cup to create an opening. Then, we'll apply contact cleaner and use a plastic pick to cut the adhesive, lifting both covers.
Be cautious with the flex cable, located right underneath the covers. Once inside the device, loosen the screws and remove the metal plate. Carefully disconnect the battery connector to prevent any short circuits on the motherboard. Lift the protective cover and disconnect the upper flex cable from the cover.
To rule out any screen flex cable issues, disconnect all connectors and reconnect them. Just this simple step can sometimes fix image transmission problems caused by impacts.
Support our content by giving us a big like, so we can continue sharing real repairs from our lab. Thank you!
We confirm that the device is now displaying an image. Today's case was relatively easy and can be fixed in a short amount of time. We'll then check the charging using an original charger and ensure a proper charging rate.
Now it's time to reassemble the device and reattach the covers. We'll share a trick to reuse the original adhesive by applying isopropyl alcohol and heat. Once the adhesive is reactivated, attach the covers, and you're done.
We hope you enjoyed today's video, and we'll see you soon. Take care!
You Can Be Membership Here
/ moviloneesgranada

[@SeeDaRipper...]

Great vid and liked, but is it really necessary to take the battery compartment back off, when all you need is the top motherboard to access everything?

[@OreoV-py8cx]

Very helpful you saved me $500 .... Thank you very very much

[@tulipantaposo]

why have you removed both of the back covers? Is it not enough to remove the one at the motherboard?

[@SeeDaRipper...]

My question exactly, it seems unnecessary???

[@DesaintMobileEngineers]

Nice 😊❤

[@painking]

ดี❤😂 ของผมก็เป็น คือแน่เลยครับส่วประกัน😊

[@navjotsinghxiisc2441]

Tested: NOT WORKING!

[@jimdo9797]

It works better now. When I know how it work, I know I could hit it, without taking it apart = Taking it apart is way over me for now

[@dianalifiansyah3010]

Is it work for Flip 4 too?

[@SeeDaRipper...]

yes

[@painking]

ขออนุญาตแชร์น่ะครับ❤

[@infiniterik2402]

This just breaks it more

[@ohary1]

you skipped the most important part, replacing the lcd

[@alleywatch22]

Tried this method but no luck

[@johnowens8974]

I'm just going to get a new phone.