Samsung Galaxy Z FLIP 4 Screen Repair | How to Replace

[@RichardMeza]

👉To purchase parts, tools or education used in this video visit Skool.com/cellphonerepair

[@dannyf4995]

The best video on KZbin for this issue. Thank You.

[@ConnieEland]

where do i get all the replacement parts?

[@luchohuaquique6137]

AliExpress

[@BeemanCellPhoneRepair]

Wow man I have been repairing phones for some time now and how I never came across your videos is wild . My opinion you made that repair so simple that a newbie with focus could do it 👏🏼

[@RichardMeza]

👍

[@jasonbuczny4007]

Can you put up a link to where to purchase a service kit new screen?

[@TempurusTV]

thanks for the Video @Richard Meza - Question: What cause this Problem? Is it, because you flip it too often or does it heat too much or why you get bubble at the mid screen? Thanks

[@RichardMeza]

The screen protector stretches from it moving all the time. Opening and closing the phone. Its a plastic screen protector.

[@patspromotions]

Can we just remove old screen protector and replace with new one ?? Thanks

[@lawoei]

Thanks to point to us the place to get the replacement assembly.

[@joeycruz1698]

ABSOLUTELY EXCELLENT video...thank you Richard. 👍

[@RicardoSantos-vk3qw]

Great Job, now I know why I was charged $400.00

[@bobliminal2664]

There is a repair store trying to charge almost 600 for a screen repair

[@Onevideoperday]

Hey Richard from London, first thanks for your video. I wonder if you could also add the link of the screen in your description, please ;) Take care

[@currencycrock2262]

Great vid, thanks. I may have missed it but I'm assuming the internal storage was on the motherboard?

[@Tdiddy-fc5hr]

You are awesome! Cool dude! Thank you so much!

[@arydant]

I might suggest you perform this task with and ESD wrist strap and grounded mat. Any static electricity you pick up by moving around can be transferred into the electronics and damage them. You wont see or feel anything but those "shocks" can stress semicondictors and shorten their life of destroy them. This goes for any electronic assemblies you touch.

[@TomGeyman-yt6om]

Thanks!

[@RichardMeza]

Thank you!

[@No_Transitory]

So it requires no heat to remove the backing? The front of my flip 4 works.. but when I open it up the inside screen is black. The phone has ZERO scratches as it wasn't dropped, but the phone itself just went black on the inside. I was pissed too when Samsung wouldn't honor the screen replacement. I had the phone for 10 months and they wanted to charge me 320 bucks just to replace the front screen.

[@WhyCry101]

Please ensure you transfer the original top magnet to the new screen when performing this repair. Failing to do so will result in the back screen not displaying when the phone is closed, as the magnet is paired with the charging port board. This step was omitted in the video demonstration.

[@matthiasmatzer]

This is an important point. However, I have put in the original top magnet, and the back screen is still not displaying anything when the phone is closed. Because it's a Z Flip4, the Samsung Self Repair Assistant for Hall IC calibration doesn't work. Do you have other suggestions of what I could try to make it work? Putting in another magnet on top (i.e.)? Thanks in advance!

[@KevinMulders]

Same problem here. When you close the phone the screen is nit turn off. I try orginal magnet and new magnet. But problem still here. Do you have an answer?

[@bigtechguys-toronto]

@@matthiasmatzer Hi, I got a new flip4 and I just replaced the motherboard of new one with the broken screen one. The outer screen works but inner screen does'nt. Can u help?

[@aprilgemm]

Hi Richard, I'm currently having an issue with upper back glass bcos it's comming off. Would you please give a tutorial on how to put those adhesives on? And where to buy a reliable adhesive? Please. Thanks!!

[@f00700-bee]

Where can I buy that SG Z Flip4 North American version service pack?

[@RichardMeza]

Skool.com/cellphonerepair

[@mobileprofix2018]

Thanks. The black screen issue is the big magnet. Just you need to use the original magnet.

[@billybanks9954]

Thanks for the video. Much appreciated. One question though. How do you if it's the screen itself that's the problem or the screen's connector cable. I have one with a problem just like this and I'll need to order the parts from abroad. So I just know what to order. Screen or just cable.

[@manlikidormer8324]

Amazing video 📹

[@SandraRodriguez-yi9yj]

Where could i get the rose gold galaxy z flip screem replacement at

[@martynbush3462]

My daughter dropped and broke her Z Flip 4 last week and bricked it. The cost to have it repaired here in England makes it worthwhile. However, having seen this video I'm going to have a go at repairing it myself. Tahnsk you for the video. Just one question: do the batteries have to be glued back in? If so, what glue?

[@RichardMeza]

Just use double sided tape.

[@mixedjungle4928]

1:40 for start

[@KevinMulders]

Great video!! I did this repair and When i close the phone the screen is not turn off. I try orginal magnet and new magnet. But problem still here. Do you have an answer?

[@jacobmedlin6953]

So I fallowed along and did my own repair on my z flip 4 but know my phone doesn’t take charge what u think could be the cause. When I did break my screen I had put my phone away and must have ran out of power could it just be that cause shows charge logo

[@SaifulIslam-qt7mw]

Thanks ❤

[@Phone-Center]

Love the content! 🧡🧡

[@nelsonalvarez1960]

Where I can get the part replacement?

[@tobanator44]

So where? You didn't answer the question...

[@mariegraceespino3450]

Where can i buy that screen replacement just like u used, because my flip4 have the same problem with what u replaced off

[@TheAshob82]

Hi great video, I dropped my z flip5 recently, and was going to get it fixed but now it seems to have locked me out of the phone :( do you know if i get it fixed, if it will unlock? Thank you in advance

[@kalliehodgson3998]

link to replacement screen?

[@wsbygt]

Almost a new phone aside from the back panels!

[@DannyTippett]

why wont you tell anybody where/how to buy the replacement part

[@bingojango2297]

hey buddy got a small problem when i open / close my phones the screen is glitching out even if move the screen just a little bit it goes black have to lock it unlock it to get it back do you think its the ribbon cable i see alot getting charged for a whole new screen makes no sense and im sure the update screwed my phone started after updated :/

[@RichardMeza]

Sounds like a ribbon cable. But that cable is attached to the screen.

[@a-off1943]

Where can i find the screen

[@georginaptilialo8099]

Hi Richard, hoping you can help me. I sent my flip 4 to get the display screen repaired, however 2-months later my (outer) front cover now has air bubbles appear from the spine, down the side and around the led screen. The back outer cover is fine. I am wondering if when they fixed the display screen that something went wrong when putting the glass cover back on? Pls advise :)

[@RichardMeza]

I would have to see a picture of it. I couldn't tell you if I can't see what you mean. I dont fully understand about air bubbles.

[@ehddedicatoria3764]

Link for screen module kit

[@BD-kc9te]

Still asking where you bought the parts

[@reginagracecaeli5480]

I have zflip4 90%black screen hinge failed. Can't enter pattern to unlock Just bought another zflip to repair it and was going to swap parts. Question, if i just swap my motherboard into new phone, will that transfer my data? Thanks

[@rb505]

Curious what you did to fix your problem? I can't enter pattern on the screen & well it's New years nothing is open today! Thanks.

[@arzakthalangara]

Forgot to put battery adhesive.

[@YellowKurt]

The problem with Reza's tutorial videos is he really enjoys hearing himself speak

[@jftonti]

i am glad that he is co clear on what to do

[@penttiranta9730]

So what about the display in the back? Why dont show it? =)

[@shubhamkandwal44]

price?

[@Rachel.uploads]

How can I get inside screen please?

[@victormendez3860]

I had to repair the screen for this phone 2 times covered under warranty. the third time it broke (outside warranty) I just left it like that and switched to iphone. This phone was pretty but way to fragile to be viable in real life

[@angelodrosi8470]

Hi where did you buy the replacement part from?

[@ConnieEland]

exactly what i was thinking

[@tonywagner4836]

Aliexpress. 50$ for a scratched but 100% working or a full new one for a few hundred. Also samsung is selling them

[@Melissiehartje]

But are they the same quality as samsung 🤨 would rather buy from samsung then​@@tonywagner4836

[@emiliap23]

Habe die gleiche Problem 😩😭

[@chrispriest1904]

HMMm he said. slide right in

[@chrispriest1904]

Hmmm he said.to deep

[@stratman103]

Now I see why screens for this are so expensive. It's 3/4 of the phone.

[@slimsunny9994]

I’m sure he just transferred the motherboard

[@Wang.tsang2010]

You lied front screen out and not open back side phone,no make sense 😭

[@RichardMeza]

WTF are you talking about?? I lied?

[@fbrodeur44]

@@RichardMeza I think he need to re-watch the video :)

[@Scitch-et4vk]

You didn't touch the screen 😂😂😂

[@clonesandplanets]

This not een screen replacement

[@scottwales5966]

This is honestly the easiest way to replace the 'screen' anything else requires a lot more time and effort to completely disassemble the phone to the point there is a lot of room for error. Especially with this flip and fold line up.

[@roeutchak6517]

Thank you!