Moving Load Generation in Staad Pro | Staad Pro Tutorials for Beginners

[@hakimix78]

For multiple span, do we apply the same concept?

[@BeingCivil]

Yes

[@satou7993]

Hello Sir, I would love to ask you, where did you get the 0.5 and what do you mean by increment. Much appreciated!

[@satou7993]

Hello Sir, I am having trouble with my file inputting the moving loads, I would love to ask for your help

[@satou7993]

I am getting 5 errors sir, can you please explain why sir

[@arnoldatotaan]

Sir how do you remove the 10 warning, or is it from the range??

[@BeingCivil]

as I started the moving load from outside the beam that's why the warning. you can ignore that.

[@ehabshawi6666]

you're the best

[@AhliSunnahRasulullahSAW]

Hi, can you please use Staad Pro Connect Edition for your future video?

[@sibhichelvane6918]

Clear explanation 👍

[@BeingCivil]

Thank you 😊

[@nithishnayaka.y.b7368]

How to apply in curved span?please let me know

[@AshishSingh-l3x]

I want only one vehicle load, the vehicle length is 75m with wheels on 1m intervals and its moving on two inclined beams of 150m with a slope of 1:20. can you help me

[@raviprasadvoletiBR16L]

How to generate these moving loads using 'open staad' function?

[@shashankshashi3203]

Hello sir please make a video on designing of suspension bridge using staad pro

[@basimalbayati660]

Dear please can we do combination for the moving load and dead load ,kind help please

[@BeingCivil]

@ 02:45 Add Dead Load case No in predefined load case to be added.

[@basimalbayati660]

@@BeingCivil Thanks so much for your kind reply, but unfortunately combination not performed, I don't know why program not perform combination between moving load and other liads, please did you tried such a case, best regards

[@BeingCivil]

yes I have tried. You can combine any one primary load case to moving load cases. go to staad input file. write ADD LOAD 1 at the end of load generation line. eg. LOAD GENERATION 500 ADD LOAD 1 (where load case 1 is Dead Load)

[@basimalbayati660]

@@BeingCivil Dear sorry for disturbing your time, thanks so much, I will try and inform you, kindly send me your WhatsApp number, to communicate with you, best regards

[@BeingCivil]

send messege to my facebook page. facebook.com/beingcivilchannel

[@mudavathgopalnaik6552]

Hlo Sir, there is no Visible the loads to move How to see the loads.I can try number of times.

[@ianandrewverallo9100]

how about for inclined surface??

[@BeingCivil]

It is till not possible in staad..

[@amirhamzanadeemshaikh7740]

I'm getting error (cannot create load generation command) can you sir please explain why ? I applied same procedure

[@BeingCivil]

please send the file [e-mail]

[@hasiburrashid1966]

I'm getting this errors **ERROR- Number of Primary Cases exceeds value entered please somebody help me

[@BeingCivil]

send the input file [e-mail]

[@hasiburrashid1966]

@@BeingCivilalready solved... but thanks for reacting... I'm still sending the file.. I'm a beginner. so, please check it

[@PRAVEENCHARY77]

WHY I ADDED 4 FOR 25+4? WHY 4?

[@BeingCivil]

the length of the vehicle 4m. And length of the bridge is 25 m. The total distance covered by the vehicle to fully cross the bridge = bridge length + vehicle length.= (25+4) m

[@alugojuvineeth6719]

76 Warnings Wow

[@rcingfever3882]

Video too fast agla baar achhe se banana 😡🥵