Moza Air 2 REVIEW | Move Over Ronin-S

[@PlaytimeAdventureTV]

Moza Air 2 Problems & Solutions: 1. Stuck/Jammed Battery Door? - Hold the handle and squeeze the battery door with force. As you're squeezing the handle push down the release button and the door should come off easily. 2. Gimbal Shaking like crazy? - To fix the camera shake. Click the Menu button > Gimbal Set > Motor > Power > Level > Then change the weight level until it stops shaking. 3. Gimbal motors and joystick shut off or stop working? - Double check and see if you left the lock switch up. If the switch is up, the motors and joystick will power themselves off so you won't damage the circuitry. Power off the gimbal. Unlock the switch and the motors should work when you power it back on. Hope this helped someone. 😊

[@jaetok]

Started crying at inception mode. I want to be a videographer. That’s it. Incredible.

[@AhsanStudios]

Your videos are always great for learning keep doing the great work. I have Nikon Z6 and want to have gimbal so I can use my Nikkor 14-24mm with FTZ Adapter for my real estate videography. Can u plz reccomend the best gimbal which will work best with my combo. Looking for your suggestion. Thanks

[@learningcameras]

Hey! Thank you so much. So the Moza Air 2 would absolutely hold that setup and would be great. Check prices though on the Crane 3 Lab

[@AhsanStudios]

@@learningcameras Thankyou so much for the reply i was also wondering if I should get moza air 2 or aircross 2

[@learningcameras]

@@AhsanStudios I think your setup would be a little large for the Aircross 2. Remember that even if it can theoretically hold the weight, the smaller gimbals cannot balance large off center loads

[@AhsanStudios]

@@learningcameras Thanks thats exactly I want your expert opinion over it. One last thing to ask do u think i should get moza air 2 or crane 2 for my setup. ?

[@learningcameras]

@@AhsanStudios Awesome! I would take the Moza Air 2 over the crane 2. The Crane 3 lab I've started to like a bit more recently but I think it is way more expensive

[@ericanderson9798]

Your intro sequence is awesome! Thanks for the review of Moza air 2 which convinced me to hop off the fence and buy it now.

[@pix-ldigitalmedia6458]

2:03 that flute guy takes his craft serious!

[@rwfthesr]

You’ve made up my mind about the Z6. And you’re very good at vlogging!

[@MaximumDiver]

@8:04 Because the lens is of centered from the rotation, wouldnt it create some funky wabble shot? Myabe you didnt position the camera properly in the X axis?

[@MusingOfaMan]

You say you'd like to mount a mic on the top of the gimbal rather than on the hotshoe due to the weight capabilities of the gimbal. Would you think a cage would be an option (and then the mic) or do you think would be overkill for the motors?

[@diversedad7954]

Literally answered every question I had about this. I've used dji in the past and my biggest gripe is having to rely on an app to change settings. Has screwed me in front of a client multiple times. Dji support is not the best. I'm buying this thing asap. They are offering free focus control with it right now.

[@diversedad7954]

Instagram got me with an ad last night. After watching your video and researching laying in bed an ad popped up for the Moza air 2 plus their free follow focus for $599. Awaiting my new gimbal. Now to sell my original Ronin.

[@nordfresse]

What both the Moza and the ronin need is focus pulling via usbc with electronic lenses on the BMPCC4k NOW! Why is that so hard to do?

[@tuca3537]

nordfresse I dont know if the ronin s supports it for the bmpcc, but I know it does for others, however it is a digital focus pull which you can see it chunk through different focus incraments and it is not smooth and there is no way to do a smooth focus transition without a follow focus system

[@nordfresse]

@@tuca3537 Really, that wouldnt be any good anyway? But for a follow focus system to work properly you would need a manual lens then right?

[@webstermediasolutions8976]

Great review. The best choice is too subjective. I have the Ronin-S. There are some things on the Moza Air 2 that I wish the Ronin-S had. However, for me, the deal killer is the ability to travel with it. If I can't pack a hand-held gimbal in my backpack...its a no go. Great review, but the Ronin-S is staying in my film kit! Keep up the great work!!!

[@learningcameras]

Thanks! Great points

[@skymakai1486]

The Moza Air 2 can't be broken down and packed in a backpack?

[@brandt_bennett]

Sky Makai correct. He mentions that during his review

[@learningcameras]

It can't be broken down but I'm sure it would fit in a big enough backpack

[@captwilder]

It fits inside my Peak Design 20L(smaller version) with a little tweaking inside just fine, granted I do carry a light prime setup.

[@spyhunt9314]

Super crisp and contrast footage ! Love that

[@SuperMouseDV]

So glad to find a Gimbal that has the features (plus more) than the DJI version that is slightly cheaper but handles so much more. I really think this will be my first Full sized camera Gimbal ..

[@AdrianSimiOFFICIAL]

Hey sir , do you know a fix to this- i found the the joystick is not working with the same speed on Pan ax , what i mean is , when i put the Gimbal with the camera on a table and pan left and right using the joystick , i see that it is going faster in right and slower in left. All tests were made with the joystick moved to maximum in each direction.

[@TheHyphenate]

Do you use transition packs or plugins for your videos or are they stock from the NLE software? If they are addons, which ones are they?

[@learningcameras]

I do have this pack for after effects: videohive.net/item/handy-seamless-transitions-pack-script/18967340 They also make a more limited pack for Premiere

[@TheHyphenate]

@@learningcameras awesome man. Thank you. These transitions are perfect for music videos. Keep up the great work. Your videos have really become A1!

[@learningcameras]

Thanks!!! Means the world

[@oneworldvideo]

Lost me at 6:45. Can't break it down for easier travelling? No sale. Great review though!

[@KevinJackson1]

With the Ronin S still being on sale, which would you recommend? I am definitely leaning more towards the Moza Air 2. Perhaps I have heard too many DJI customer service nightmares.

[@everydaybettereverydaystronger]

Yes DJI is a nightmare to deal with

[@sunglee2048]

I do like my Moza Air 2, but one of the batteries crapped out in less than a year. It's costly for the battery replacement.

[@TheGeoDaddy]

FYI - I just bought the Z6 Kit and I had a little challenge connecting the Z6 to the Moza Air2 until their Tech Support clued me in (that you need to use the USB-C converter in the little bag) and follow this sequence... NIKON Z6-->Micro USB to Type-C Adapter-->M3C-Micro Cable-->CAM CTRL port on Air 2. The CAM CTRL port is on the side of quick release plate, next to 7.4V OUT.

[@learningcameras]

Good to know!!! I haven't actually connected mine yet. I usually prefer to go cable less for most shoots

[@PhillipPilkingtonPhotographer]

Hey, thanks for your comment. I am having the same issue but I don't have an adaptor with my moza air 2. There 4 cables none fit into usb c on the Nikon z6? Thanks. Phill

[@TheGeoDaddy]

At first I couldn’t find it (in the Z6 Kit) but I wasn’t sure what to look for... so I ordered one and realized it was in the kit... good to have a backup since I could see it coming lose or breaking off if rip out of the camera body... I should get a cable bracket! Moza did provide good support once I pestered them... but it did cost me $20 in shipping...

[@tonyniderost1630]

OMG. I have tried the Zhiyun Weebil, Crane Plus, and I have the Ronin-M. I just got this yesterday and have been playing with it. I LOVE IT! It is everything I wanted a gimbal to be. I'm sure the Ronin-M has its use cases, but I don't think I need it. I might try to sell it. Wow.

[@Mus_Jepretz]

Weebill vs Moza air 2 Which one is better.?

[@muradjam]

great review thank you. I wonder if it can stabilize a Nikon D850 + Nikkor 70-200mm lens ?

[@leonardlevy8811]

I bought a Moza Air 2 and it has not worked properly from Day 1. The camera always points upward as a default and I lose level whenever I turn it to the side. Tried upgrading firmware to no avail.

[@TishawnFahie]

Thank you for this video - I have a ronin-s and I wish I could use the focus wheel for somthing else. Can I ask you - can the focus wheel be re-purpose for pan /rotation instead of tilt? Thanks.

[@learningcameras]

Not as of now

[@TishawnFahie]

@@learningcameras good to know. Thanks for responding.

[@dietwedge]

Digging the Crane 3 Lab over both of these at the moment.

[@GenesisFilm]

Great review and phenomenal picture quality with the Nikon! Thanks and keep on making top notch videos.

[@jasonlindquistmedia]

If DJI had the focus wheel control set to roll, id be so stoked, could that be in a firmware update?

[@learningcameras]

Almost positive it could be

[@niconatal1]

can you control focus with the NIKON Z6??? and with a Nikon D850??? thanks

[@sasefilms]

Hi Dan, Great Video and review of the gimbal, My new Moza Air 2 is showing an ERROR! 02 and would not start up reached Gudsen several times with no response would you be able to guide on how to reset the gimbal to its factory settings or rectify ERROR! 02?

[@rickvestuto]

I just bought the Z6 and the Z7 and am soooo very happy with my purchase now i just ordered the Mozo Air 2 so i can't wait for it to arrive thanks for the Great honest content that you put out Would love to see a Side by Side of the Moza Air 2 VS Crane 3 BTW congratulations on 100K Subs regards, rick

[@verasedinova9676]

Hi, I am just about to buy some gimbal and I really like Moza Air but I would like to ask you something. Can I use this gimbal with my Nikon Z6 with FTZ adapter, and with tamron lens 18-400mm? :) Thank you so much in advance. Have a nice day :)

[@garnel66]

I just noticed DJI Ronin S is £500 on amazon.co.uk vs £550 for the Moza Air 2. So looks like DJI are worried and rightly so by the look of things. Thanks Dan

[@RoyalCodeFilm]

Yup. If it wasnt for the air2, no way the ronin s would be on sale and even copy moza with the free ff. The least they can do is match or beat price because gimbal feature wise they lost already.

[@arto1969]

Gary Nelson First step for Dji is to drop the price Second step is to launch a new version of the Ronin S

[@Omerkrana]

Can't find the sale anywhere on US websites

[@slifox2752]

The ronin S works with Sony for start and stop recording , half press focus and full press picture taking... don’t know why you are not mentioning this at this late stage

[@learningcameras]

When I had it you needed to use the ir blaster cable which was horrible. Usb control didn't work. Did they update it to work with USB? I don't have it anymore as they just sent it in to me for a couple weeks

[@dab7963]

Works on the new Nikon z6? Can it control the camera

[@markshirley01]

Thanks Dan - when do you think you'll have your Z6 review up.

[@learningcameras]

Probably 1 week after Christmas!

[@markshirley01]

@@learningcameras thanks Dan - have good Christmas 😎👌

[@ChristosSerranoThoma]

Great video) I have a question, can you balance the Sony a7 series with the 24-70 GM??? On my Crane plus is supports the weight but when balanced it hits the back of the gimbal! Thanks!

[@BenjaminKanarek]

How does my Crane 2 compare to it? Does it support Fujifilm X system?

[@tnygp]

My only gripe with this is it cannot disassemble to smaller pieces to fit into travel bags. If I will be traveling with this, so you recommend I go with the Ronin S?

[@LouMonestime]

What is your preferred way of mounting an external monitor?

[@learningcameras]

Using this: amzn.to/2EVkXrk

[@LouMonestime]

Thank you !

[@johnwelsh2508]

The threads on my quick release won’t tighten, have you run into this problem with yours?

[@thoughtprovoking001]

Coming from a BMPCC4K user... that Z6 footage looks so good. Very clean and great colours!

[@filipjanega1543]

Z6 is green in lowlight

[@GhostsGraphics]

How would you compare the BMPCC to the z6?

[@thoughtprovoking001]

@@GhostsGraphics I can't compare the two as I haven't used a Z6. The footage here looks very nice though. For my use, the Pocket 4k is a dream to use. The RAW footage is just so easy to work with that it feels like cheating. I don't do run and gun work so the AF is not critical for me although it would be great to have for general use. The menu is the best I have used by far. It's a work of art and what every manufacturer should aspire to. I REALLY wish it had a flip up (not flip out) screen and I wish the screen was much brighter. I LOVE the "good take" feature. I tend to make a few mistakes when I shoot so when I get a clip that I like, I mark it as a good take. Then in Davinci Resolve all I do is filter my good take clips and I don't have to work through all the rubbish. This is a massive time saver for me.

[@mauibuilder1239]

After using the Crane 2 which I loved, I must say gimbals with triggers are a game changer for reentering, etc. Does that gimbal allow you to change aperture, iso, and shutter speed from the handle on Canon, Sony, and Nikon cameras when the usb cable is connected to the camera?

[@ManuelRusch]

On Canon and Sony yes, Nikon no.

[@learningcameras]

Right now it can only change camera settings for Canon although it says Sony support is coming. No mention of Nikon

[@ManuelRusch]

On page 9 in the manual they list a bunch of supported sony cameras ( www.gudsen.com/upfile/admin/file/download/Air%202说明书V3.pdf )

[@63MacGuy]

I have heard that on Sony when you switch the camera to PC Remote, you loose IBIS

[@mauibuilder1239]

@@learningcameras thank you for the feedback..I watched your video again and realized you had answered that question. Looks like a great gimbal...hoping it will squeeze into the laptop compartment of my carry on camera bag.

[@silentsnipe215]

If you had to grab this the Moza Air 2 or the Zhiyun Crane 3 Lab which would you lean toward.

[@learningcameras]

I have the lab 3 too and honestly I don't love it. Just the ergonomics don't work for me at all so I personally use the air 2 almost always

[@silentsnipe215]

Thank you so much for reply I really love your videos and value your input on these kind of things. I know I have to try it out for myself but it never hurts to ask. Thanks a ton for your work.

[@TheGeoDaddy]

Shooting first wedding this weekend and I was practicing the Obit shot on my Moza Air 2 but I couldn’t get my camera to stay orient to the center subject by locking down the three axis es and walking around the subject... must be missing something???

[@TheGeoDaddy]

There’s a “manual” ? I rely on You and KZbin to make up for the lack of manuals these days... besides, using my iPhone on my Osmo and Zhiyun is MUCH easier and produced superior results...

[@balazsszentesi6360]

Love to see your passion over the topic! Motivating! Is there difference between air 2 and aircross 2? Or they are the same gimbals?

[@learningcameras]

Thanks! The Aircross is smaller and more suited to smaller cameras like mirrorless options. It also is a bit nicer in a few ways but again, not made for crazy heavy loads like the Air 2

[@balazsszentesi6360]

Thanks for the response! If I am right we are headed to the aircross2 which is capable for heavy stuff too. I cant wait to see your reactions on it when you test it with bmpc4K...:))

[@Turbo9898989]

Great review Dan. Nice footage with the Z6 as well. For the slow motion shots, are you using the 1080 60FPS or going 4K at 24 frames and slowing in post with Time Warp?

[@learningcameras]

Thanks!!! The slow motion is either 1080 60 or 1080 120 so a good portion of this video was actually the Z6 in 1080p

[@geovannyrojasl5955]

Hi, i have a question, i've just bought mi device, and in inception mode, once i want to rotate the device it begins to move itself as if the device could not stand the camera (Canon 7D Mk ii with a 24 mm Canon Lens Pancake)... The movements are like shaking several times :( Could you help me out?

[@riosfamily]

How about the new zhiyuns? Weebill? Crane 3?

[@richardsunga9528]

Can this do the infinite roll like the ronin? Mostly in flashlight mode.

[@michaelfrymus]

Does the gimbal handle unscrew? The first Moza Air (That I have) unscrews and I can easily fit it in my bag. This gimbal looks like a great upgrade, but if it doesnt unscrew, might not be a good choice for me Also, the first Moza Air I have doesnt include a baseplate (Got it before they added it on) And I like that because I can attach my own arca-swiss baseplate as I dont use the Manfrotto plates. So I guess Ill have to put a plate on top of a plate?

[@danielgarrido9450]

thanks for your video. I bought the gimbal 3 days ago and I have a doubt that I do not know if it can solve me. Can you control the ifocus with the iphone app? Thanks!!!

[@AllenWatts]

Thanks for a great review. I'm curious to know how the app compares to the DJI app, I've seen people use the Ronin-S to do basic motion control shots, and attach it to simple jibs and control it via their phone. So the app seems to play a big part, do you have any thoughts on how they compare?

[@learningcameras]

What I like about the Air 2 is that you don't need the app for most functions since it has a screen. The app is very good though and does allow you to update firmware. The DJI app is pretty much needed to do anything

[@spencerbailey4091]

What do you use for your transitions??

[@marcosdduran7074]

hey just a small concern you didnt lock off your tripod plate after you clicked it back into place. good video though thanks :D

[@Jorge_moya]

The lack of breakdown on portability killed it for me. I had the ronin s and like the fact that it breaks down for travel since I move around a lot and need to be able to pack it for storage. Great review and footage.

[@TheZabutican]

Hey! How can I use the timelapse mode with Sony A7iii? The shutter doesn't go off on the camera when trying to take pictures. However, the Moza Air 2 continues to move along with preset path during the timelapse. I have A7iii currently on PC Remote Multi and on the Moza, i've had it on Sony- Multi.

[@LifeSurfingDude]

Dan, I have recieved the gimbal yesterday and started playing with it. One thing I have noticed is that once you set all axes to 'lock' (lock mode) and try to tilt gimbal to the left more than 35-45 degrees, the motors (after similar to knocking motion coming from motor) become unresponsive and just hang there without being sturdy. I need to power it off and power it back on to get it working again. Do you have the same behavior? is it expected? Just an update to the first paragraph I wrote. Sometimes motors will shake but if I tweak the power output of the motors I can either eliminate it or reduce the occurrence of it drastically. Motors sometimes can lose the that clear horizon line but gimbal is easily reset without switching it off/on. Motors might also give up sometimes under those extreme angles and that's when powering off and on the gimbal is necessary. With that being said, it's a nice piece of equipment but it is heavy. Jeez after 3 minutes of playing with it I could feel it in my back, arms, wrists. Doesn't look like you hit gym regularly but I have to say, you must be one very strong man to work with this gimbal. It is just heavy, returning. :-)

[@DFVIDEOS]

Wow! Where can i learn to grade my footage to look like yours ? Or is it still not possible on my A6500? Its amazing!

[@learningcameras]

Appreciate that! It's definitely possible with the A6500 but you need to watch the highlights carefully. I plan on doing a video on how I edit along with some luts soon!

[@0800filmez]

Can I use a Tilta Nucleus Nano with this gimble? Thanks

[@studiovitta]

very nice review Dan. one question. moza can zoom a sony lens like 18-105 f4 without ifocus?

[@learningcameras]

Not 100% sure since I have not been able to try it. I think right now the motor zoom was only Canon but coming soon for the other brands

[@wonderboomer6057]

Will MOZA Air 2 and iFocus motor work with CANON EOS M50 mirrorless camera?

[@BROOKLYNPOETZ]

Awesome video! Did you do the editing for your opening sequence? It is amazing. Would love to see you provide a tutorial on those transitions and speed ramping. You definitely have a new sub!

[@learningcameras]

Thanks! Yep, I do all the editing for my videos. I'm definitely planning on a bunch of tutorials so stay tuned!!! Really appreciate the support Jarret!

[@mahdiyussuf9804]

Nikon footage looks great, great job. But highlight clipping is prevalent, that's just the camera's performance right?

[@learningcameras]

So it does have a decent grade applied so keep that in mind. Highlight clipping to me is less harsh than my Sony's but still high. Of course this was shot internally 8bit instead of 10bit external

[@navakisoraadb4715]

Does it balance BMPCC4 with heavier lenses?

[@Jon_bodhi]

Damn! You're really good man. I got the Moza Aircross and I love it. But I need something that can hold a zoom lenses for when I do weddings. Moza air 2?

[@learningcameras]

Haha, appreciate that Jon!!! Yeah, I use the Air 2 with the 28-75 F2.8 from Tamron and it works perfectly for that. I don't re balance it at all when I zoom and it handles it like a champ

[@evilaptness]

Received Moza Air 2 after 3 months of waiting and the OLED screen is not working after turning it on. Can anyone help me with a workaround coz the Gudsen’s support is HORRIBLE.

[@armacanqui]

Does the follow focus wheel work with Panasonic cameras natively (without an external FF gear/switch)? You only mentioned on/off and start/stop functionality but I wasn't sure if this also meant the FF only works on Canon, with Panasonic "coming soon." Love the footage though!

[@learningcameras]

My understanding is that the FF will work with any brand as it doesn't need direct camera control. The functionality missing right now with Panasonic is control of shutter/aperture/iso/zoom....stuff like that which honestly I don't use the gimbal to control that anyway

[@cactustweeter2890]

Dan this looks great. Does it have an app that you can program motion time lapses with? Looking forward to that Z 6 review.

[@learningcameras]

Thanks! It does do motion timelapses though I haven't tried it yet

[@brandt_bennett]

Thanks Dan! Does this do a 360° roll?

[@roblindsay22]

Yes, they call it "Inception"

[@carlsalen8786]

Can this fit in a Lowepro Protactic 450 AW II?

[@Keatonrsmith]

Thanks for the great review! Do you have a video or recommendation for camera settings while using the gimbal? Specifically, do you lock out focus previous to filming? With all that movement from both the gimbal AND the actor/subject, I want to ensure the camera settings are best created so nothing messes up the movement effect of the gimbal.

[@learningcameras]

So for these everything was using autofocus. However I used to use the GH5 a ton and I don't think the autofocus is good enough to use with that so I used to lock focus and keep the same distance to my subject through the take. Also, some camera image stabilization systems don't perform well with a gimbal so either test yours first OR turn it off. I usually turn off stabilization on my A7III when using a gimbal but the GH5 worked very well for example

[@Keatonrsmith]

Dan Watson thank you! Would you recommend I turn off LENS stabilization? I have the canon T7i... not sure how lens stabilization impacts the gimbal versus in-body stabilization? Thanks again - I JUST got my MOZA air 2 yesterday, stoked. Have you ever had any issues with the integrity of the quick release adjustment screws? My quick release that allows the mounting plate to slide fore and aft just keeps spinning, doesn’t tighten or seem long enough. Had to use my own screw. Worried about how they all “hold” during use and run & gun filming.

[@learningcameras]

@@Keatonrsmith Lens stabilization is usually good to leave on but do some testing as it's very dependent on the lens and the footage will look jumpy. I definitely have not had that issue with the mounting plate

[@Keatonrsmith]

Dan Watson thanks brother! 🤙🏼🤙🏼🤙🏼

[@RemeRed]

Love your videos tones. Do you have luts or recommendations for Sony picture profile?

[@northjutlander7158]

its been a while, but how would this fair with a phone in f.ex. a beastcage? i guess there wouldnt be any "features" but wyou think it would even work?

[@leonardlevy8811]

Is there a way to mount a monitor like a small HD Focus to the gimbal handle instead of onto the camera? Its easy to do on the Ronin S with a SmallRig adapter. I do see that 3/8 screw hole in the front but that seems a little more troublesome than a screw on the side.

[@learningcameras]

Moza sells a handle for a monitor as well as a cheese plate with a ton of attachment options: bit.ly/2R6ZXFi Those just went up for sale this week so I haven't gotten them in just yet

[@TheGeoDaddy]

What Nikkor lens can you use? The kitted 24mm to 70mm’s focus ring is to deep???

[@learningcameras]

I shot with the primes and mostly with the new 35mm F1.8 Z

[@mytitle97]

will it fit in a backpack though if I cant bring the case places??

[@matejpirnat6743]

Is Moza air 2 fully compatible with FujiFilm XT-2? Ronin S is not compatible with FujiFilm cameras.

[@danielmcneilmedia]

Great review, thank you. I purchased mine and love it! I have to ask, do you use your Sony 24-70gm with this setup? Bit surprised not to see it on there during the review!

[@learningcameras]

Thanks! I have since switched to the Tamron 28-75mm f2.8 for the gimbal to help save my arms and back lol

[@danielmcneilmedia]

​@@learningcameras Haha! Well that makes a whole lot sense! It's a great lens too. Did you have any problems balancing the 2.8 24-70gm when you tried it with this gimbal? I can imagine it to be quite top heavy but presuming the motors can handle that set up no problem... if you want to have a strenuous workout every time you go to shoot?

[@learningcameras]

Yep, it balances with that lens if you push it to the back

[@SimeonKolev]

Cool video, great gimbal :). I have a question about the Sony usability. My Crane 2 can activate the Clear Image Zoom (and maybe if the lens has PZ...) is the Moza Air 2 able to do that?

[@learningcameras]

Thanks! So right now it definitely can't although moza suggests that support for zoom will be coming. No clue when though

[@SimeonKolev]

@@learningcameras I think they had it working with the Air gimbal via the remote. There was an option if I remember right.

[@miguelx2187]

What I liked was that it was relatively easy to set up, although it is apparently easily breakable so wattch out for that.

[@lesmeilleursscenesdefilms9354]

Could I charge a bmpcc 4k battery while using it with the morza air?

[@djtwilite318]

thanks for the video. i have the same camera and lens and i want to know how would it work with the sony battery grip added?

[@learningcameras]

I'm almost certain. This gimbal has tons of room to adjust for a grip

[@studiovitta]

and it can power a sony camera via usb? like a7rii?

[@jennifer-nw3gu]

HI Guy, did you check Feiyu new gimbal , the AK2000, it is much cheaper than Moza air 2 and with a very unique touch screen. Can you take a view for us that? Thanks .

[@learningcameras]

They have contacted me and I hope to try the gimbal soon. The AK2000 looks solid though and I have no reason to believe it won't be great

[@Holtenstein]

I love my Crane 2 its worked out well. However, I'm starting to use more anamorphic glass and it's too long for the Crane 2. I'm hoping that this one will fit better as it looks like it has better clearance. Could this fit a 70-200mm?

[@learningcameras]

Never tried it but it does have a good amount of clearance

[@Holtenstein]

@@learningcameras Yes! Thank you. I was worried about that.

[@2010kevinsmith]

How does this compare to the Weebill Lab? I know that’s a bit like comparing apples to larger more robust apples, but I’m curious to hear your opinion of the Weebill Lab :-)

[@learningcameras]

Granted I only played with the Weebill for a few minutes but I didn't love the form factor. It felt more front heavy for starters. Plus I usually use a gimbal a TON during a wedding day so I'm holding it for hours. I love that a traditional gimbal allows me to rest it on my belt or leg when I'm not shooting and the Weebill didn't. Again, barely tested it but wasn't digging it for me

[@2010kevinsmith]

Dan Watson thank you :-) i havent played with one, but i worry my hands would be hitting buttons the whole time with it’s tiny handle (when the tripod legs are removed). You mentioned the Moza Air 2 is more than 3 pounds; in regular use, do you even really notice the extra weight compared to other gimbals?

[@freejay3]

That gimbal is for Weebills...lol

[@markshirley01]

The Z6 footage looks very nice Dan - may I ask what lens you had on it.

[@learningcameras]

Awesome! Used the new 35mm F1.8 almost exclusively

[@markshirley01]

@@learningcameras Dan you mention on this video that your Z6 review should be up soon - but all I see is one from 2 months ago - is that your final review.

[@learningcameras]

@@markshirley01 Nope, the final is being edited right now and I hope to have it up in the next few days!

[@skymakai1486]

Love your videos, Dan! Great production value and overall quality!

[@learningcameras]

Thank you so much!

[@thogan]

Are you using this Moza Air 2 for your wedding shoots or are you still using the Moza Air because of its lighter weight and less strain on your arms and back?

[@learningcameras]

Air 2 for every wedding. Had 2 weddings this weekend and used the Air 2 for both. You can see it in my instagram stories

[@TheZabutican]

Can the focus wheel control the tilt and pan along with the roll?

[@learningcameras]

Nope, just roll

[@IKIGAIofficial]

wait did i miss something? why is it better than the ronin s?.

[@learningcameras]

Has a screen which allows you to access pretty much all your settings on the fly rather than having to hook up a phone to the gimbal. Also it has a much better quick release system

[@IKIGAIofficial]

@@learningcameras ah i see thank you :) quick release is a must because i constantly switch between glidecam and monopod

[@miloradkaravidin8818]

Just purchased Moza Air 2, it was only 350USD (grey market). Seems it will be well paired with Z6. Thanks for great review.

[@mgk8085]

Where?

[@miloradkaravidin8818]

@@mgk8085 China

[@mgk8085]

Thanks for replying. I see some on Ali Baba for 399. Do you think those are legit?

[@miloradkaravidin8818]

@@mgk8085 Probably they are, I bought mine on APP similar to taobao, just in this case is for private transactions (some of the sellers post on taobao as well). Moza 2 is 2400 rmb, Ronin s 2600 RMBand Weebill 2800-3000RMB.

[@mgk8085]

Sounds good. I just dont want to get scammed but i’m surprised bu the prices. Sounds too good to be true.

[@shem44]

Any issue with the gimbal roll for no reason like what happens to many gimbals in the past?

[@learningcameras]

I have seen what seems to be occasional slight drifting in the roll like other gimbals but what's better about this is I can correct this roll in real time with the knob on the side!

[@gurunketa]

I am still waiting for lighter gimbal perfect for a7iii and 16-35 g master. I have ronin s, but I feel pain in the wrist after using for few minutes.

[@learningcameras]

My favorite light gimbal is the a1000 but it probably won't hold that setup. Even when you find a gimbal that can hold the weight, it may not balance well unless it's a larger heavier setup. I use the 28mm F2 and a1000 gimbal when I want a lightweight setup. Your camera/lens weigh more than the gimbal so I would trade lenses

[@gurunketa]

@@learningcameras thanks !!!

[@ryanboyd8135]

Awesome review! It’s just a waiting game seeing who will give the support to Z6 first.

[@4740424]

I mean Moza Air 2 is really cool and everything, but man, that killer Intro tho!!

[@learningcameras]

Hahaha, appreciate that!

[@commercialand]

Confused another popular camera guy on KZbin said that the motor's were max out with a fairly light load and it concerned him.

[@roblindsay22]

I'm not able to connect my iphone with the Air 2 yet, despite seeing the interface. The Air2 is not showing up on the phone's BTooth list. Anyone have a solution?

[@TheGeoDaddy]

Anyone else pissed that the promised Nikon/Atomos Ninja V ProRes RAW seems like it was forgotten a year after it was pitched to sell the Filmmakers Kit?!? Been putting off a major project in anticipation of shooting consistent Compressed Log “bitage” and now I’m thinking I need to EAT the extra storage to just shoot N-log.

[@Timothy_Andrews]

Hey Dan, im wanting to start youtube again but thid time with a big aproach. I want to get a camera, but i can't afford 1000 dollar camera. What do you recommend i should but or do?

[@learningcameras]

Definitely get the Canon 77D which is on a massive sale right now: bhpho.to/2hOrj3q It's the best youtube camera unless you can spend over $900 + lenses

[@Timothy_Andrews]

@@learningcameras Thank you so much! I'll check it out.

[@Pedrobett]

Was it you on the news about the shark??

[@learningcameras]

Yep!!! That's me lol

[@Pedrobett]

Dan Watson lol

[@Marlonorellana]

I just got the DJI as started seeing the moza air 2 UGH well i got it for about 500 so its all good saved 100$ i guess lol