MOZA iFocus Handunit New Firmware Version 2.0.0（Release Date: December 3, 2019）

[@lumafilms507]

thank you so much for your extraordinary explanation!! now all works fine!!

[@RoyalIsmayilov]

Great explaining , thank you so much

[@knartfocker_]

Anyone know how to get the Moza iFocus M to be used with just the hand unit so it can also be used on shoulder rigs without the gimbal?

[@BigKarl519]

Just upgraded. It's a major difference in control speed, feels smoother but I do wish the feature to manually set A and B markers wasn't removed.

[@Skapo]

That seems like a fairly significant thing to remove.

[@BigKarl519]

@@Skapo It's disappointing and I doubt we'll be able to downgrade.

[@OrenArieli]

If I'm not using the ifocus M with the gimbal, can I still pair it to the hand controller? (I'd like to use this to pull focus from a tripod mounted camera).

[@TaniaLeiva]

I updates both but the moza air 2 wont connect to my ifocus M. next to "switch" the off doesn't turn to on. And when I go to "set A" and try to set that up it says "err". What am I doing wrong?

[@marcoguerrero3347]

same, did you figure it out?

[@GeorgeStanleyStan]

Same here

[@TellerMediaMexico]

Any answer to how to solve this issue?

[@dittoasta11]

Any update firmware on 2023?

[@DSLRVIDEOTIPPS]

No Software (MOZA MASTER) for MAC? :-(

[@TechitBox]

Love from Pakistan

[@ภาณุมาศธรรมบวร]

I cant switch on iFocus in the F1 Mode. How can I Solve this problem. I upgrade with the Moza Air 2

[@ribeiromichael]

same error

[@MB-Ldn]

Thanks for the video, just wondering if the programming feature of pre-defining focus points A & B allows a way to control the speed or time of the focus tracking playback?

[@GudsenMOZA]

Hello, it can't control the speed or time of the focus tracking playback yet, but this is a great suggestion.

[@priesjensen]

After updating my Ifocus won't connect to the Air 2 and its flashing red?

[@ribeiromichael]

Same here

[@chaitanyabhatti3805]

can i upgrade the ifocus using aircross 2 gimbal or it only upgrades with Air2?

[@jefersonperea8405]

I carried out the entire process for the firmware update of the moza air 2, but when it came to doing it with the ifocus m, it was inactive. What should I do to activate it again?

[@GudsenMOZA]

Would you please contact us via Email: [e-mail] and send necessary information including purchase receipt and video or picture demonstrating the detailed problem?

[@simonbendixborregaard6376]

Ifocus won't pair with my hand unit, I updated both firmwares, I'm not sure how to check though.. when holding on button on the ifocus it just keeps displaying pairing... any help?

[@GudsenMOZA]

Hi there, thanks for reaching out to MOZA team, you can contact our service center to help you out, [e-mail], thank you!

[@lukeworrall8518]

So far with the moza air 2 and focus all I've experienced is pain. can not recommend.

[@varelacaseiro]

Hello, Thank you for your explanation, although I have some doubts: I use iFocus motor and handunit, when you turn off both, are points A and B preserved since the last adjustment? I tell you this because I just update to version 2 and I do not keep the settings of points A and B. Moreover, I have to pair them every time I turn it on. This happens ... really?

[@philipp9550]

Yeah the recalibration every time you turn them on is annoying

[@jentakstudio5382]

good day. I have problem. after uploading new software. the light is green. cannot be connected to the hand-held unit.Can you help me?

[@GudsenMOZA]

Hello, don’t worry，please write an email to [e-mail] for professional guidance.

[@stereomix88]

works 🍀🍀🍀🍀

[@yhoyoddd]

i cannot find my moza air 2 on my mac. even i have installed the latets driver

[@GudsenMOZA]

Thank you for your feedback，we will check it out soon，you could try to upgrade the firmware via the MOZA Master APP.

[@nixcreations1943]

hi brother, one question. if both are in different firmwares then how to update if i dont have the gimbal.

[@GudsenMOZA]

You could upgrade it via computer.

[@Cookislandsonair]

Same here: updated to firmware 2 and got all the problems. Have to pair and calibrate every time. How long it's gonna take to the "engineers" to release a proper fix via new firmware? Paolo F.

[@r-mediaproduzionivideo2581]

So it's impossible to use iFocus with both, air 2 and wireless handunit, at the same time?So when going from gimbal to tripod I have to reflash firmware? Am I right?

[@GudsenMOZA]

Hello sir, we will fix this issue in the next firmware version soon.

[@r-mediaproduzionivideo2581]

@@GudsenMOZA by soon you mean a week/month/year?

[@millenialsvideos1011]

@@GudsenMOZA u mean years?

[@reuvenbelenkiy6865]

please. can you make video about issue at moza aircross2 vs sony 7iii that by remote cable control it can't record video on both sd card

[@GudsenMOZA]

Hello, don’t worry，please write an email to [e-mail] for professional guidance.

[@reuvenbelenkiy6865]

@@GudsenMOZA they do not know what to say

[@WisebuyIsrael]

But what about the app? can i finally control the ifocus through the app?

[@GudsenMOZA]

Hello, we are still working on it.

[@cristiangordoalvarez]

@@GudsenMOZA , es lo único que saben decir que siguen trabajando en ello, lanzan un producto explican todas las características y cuando lo compras "sorpresa" le faltan la mitad de las funciones por que están trabajando en ello. Lancen sus productos al mercado cuando los tengan terminados y testeado no nos fastidien a los clientes finales con esas cosas por que se podría ver como publicidad engañosa

[@varelacaseiro]

@@cristiangordoalvarez Totalmente de acuerdo, este aparato, por llamarle algo, al conectarlo siempre está "unparied" en la versión 2.0.0 cosa que no me pasaba en la 1.1.1; o sea , paso atrás. Lo de recordar los puntos de inicio y final, sin cambiar de lente, ya es mucho pedir para lo que cuesta, pero se podría hacer. Lo que más me molesta, a parte del apareo, es que para que la rueda dentada se mueva hay que definir los puntos start y end del recorrido de la lente. Vamos, no sirve.

[@varelacaseiro]

Hello I use ifocus motor with handunit. Version 2 in what has improved? Tell me. This device must be configured every time it is turned on. Version 2 is unpaired every time it goes out, and it starts over. I understand that he has no memory, but make the wheel turn when starting, how difficult are you engineers? Then I will put points A and B if I want. With version 1.1.1 the following happened to me: 1) I turn off both 2) I turn on, it is paired but does not remember points A and B. 3) Sometimes, the next day, if you remembered those points when starting, mystery ... hahaha .. Gentlemen of Gudsen Moza, I have not solved anything with version 2.0.0, it is more, it has complicated me more than the previous version because now I need to pair every time I turn it on, I hope that these reflections make you improve a product highly improvable Greetings

[@GudsenMOZA]

Hello, thank you for your feedback，we will fix the issues as soon as possible.

[@Cookislandsonair]

@@GudsenMOZA Not only the pairing and calibrate problems, but also the motor blue light when charging never goes off.

[@FranklinOsondu]

Believe the video at your own risk... My moza hand unit won't update, it returns an error when connected to momza master, it wont also connects tp the ifocus motor... Make your firmware open source if you people cant fuking fix your issue!!

[@InterAnest]

I follow these instructions, the follow unit upgreades ok, but i am unable to pair the ifocus and the hand unit. Other people are having the same problem.forum.blackmagicdesign.com/viewtopic.php?f=14&t=86313 offers a solution but this doesn't work for me.

[@GudsenMOZA]

Hello, don’t worry，please write an email to [e-mail] for professional guidance.

[@InterAnest]

​@@GudsenMOZA The problem was that I held down the button for too long on the ifocus unit, putting it in uppgrade mode every time, making the light flash white. During pairing i now only hold down the ifocus button for two seconds, and it turns blue and the units pair. Thank you for your fast help. In the next step I hope you enable the Master app to program the ifocus and the slypod together. I need the motor to pull focus for my macro shots. Currently I have to do it manually.

[@johnycane]

@@InterAnest Wow...searched for hours after not having any luck with the broken master app and this is the answer to this problem. Thank you

[@RuedasChinas]

please... need to downgrade v2.0... support via mail with no results.

[@jentakstudio5382]

I do not recommend installing. This update killed my ifocus motor. Gudsen can't advise on how to fix it.

[@RuedasChinas]

finally did you repair it?

[@jentakstudio5382]

@@RuedasChinas yes, i was just doing the wrong pairing procedure.

[@ribeiromichael]

@@jentakstudio5382 how did you fix it?

[@geodrone7643]

Garbage app, garbage iFocus M... A lot of issues, not connecting... Chinese crap.