Mr Tuffy Tire Liners vs Tannus Armour Foam

[@aaronsmith2517]

You should ride through a thorny field with both and see if either get a flat.

[@johnsheetz6639]

They're good for that it's Thorny sidewalks that will get you

[@jesseschumacher4080]

That’s what I was hoping for. I don’t think my decision of flat protection will ride on the softness added. I actually prefer a stiffness because I get a more efficient thrust out of my pedaling. Softening is like low tire pressure that makes you do extra work.

[@TravisMcGee151]

@@jesseschumacher4080This video was supposed to compare the two for puncture resistance. No such luck. I use Flat Out in the tubes of my 4” wide fat tires. 450 miles and no flats yet. This area I live in has thorns everywhere.

[@doncarpenter83]

I did that with tannus and no flats hundreds of thorns and the taffy liners couldn't handle it

[@jayj8664]

@@jesseschumacher4080😂😂😂

[@beausbargarage6213]

I learned from an old timer Just run tow straps inside wheel! Cheap and works

[@scottp7587]

i also heard to run fire hose as liners.

[@superturbocharged]

We used hot wheel tracks back in the day and never got flats after installing them just tape up the seams/connections

[@aldozarate2163]

Im gonna try this

[@volocty]

Interesting comparison - My personal experience riding in Southern California (Mecca for Goathead thorns) is that Tannus proves worthy. I have used several "liners" and none worked as needed. I've had the Tannus inserts w/tubes for about 6 months now and not 1 flat. I thought it would be interesting to count the thorns I picked up and pulled out, over 50 so far. I'm a believer in the Tannus solution.

[@thetruebrit85]

​@wildernessmusic1068No tyre in the world? Don't be so ridiculous..😂

[@mrnorthz9373]

​@@thetruebrit85i think hes saying every tire should have thorn protection

[@petejansen8098]

Did your put the stock 4" tubes back in the Tannis liners or buy new smaller tubes? Please.

[@volocty]

@@petejansen8098 I put the smaller tubes in and it fits perfectly. I used foot powder in the tires and on the tubes to make it easier to fit. I love them.

[@ronsantos475]

@volocty what size tube do you use to fit ?

[@johnb9005]

I once used Tannus Armour and after a while both the front and rear Armour compressed permanently to about 1/8 of an inch in thickness. I got a flat from a small metal shaving in the front tire and it went right through the Tannus Armour. I tried riding with a front tire flat with the Tannus Armour and stopped because I was concerned about the rim becoming damaged. I no longer use Tannus Armour and use some tire liners with Schwalbe Marathon Plus MTB Smart Guard. They are heavy tires and are advertised as being thick enough to not get flats from objects the size of a thumbtack. I road several thousand miles without any flats. If your bike tires are as flat resistant as car tires, that is ideal. Objects like screws and nails that give car tires a flat will also give you bike tires a flat unless you have airless tires or airless tire liners.

[@Nickles4]

Thanks for this comment. I remember hearing people having to deflate their tires after every ride. I’m all set on paying $160 for a pair of tannus armor and I’ll just get mr tuffy for half the price and get the same results.

[@johnb9005]

@@Nickles4 You're welcome and happy trials.

[@CONSCIOUS_TALK_ENT.]

​@@johnb9005 So what do you advise for my 26 by 4 flat?

[@HeyChief666]

Does tannus armour feel heavier?

[@DYNABIKE1]

Watching You do all that work is crazy. I put the bike on My work stand, cracked one side of each tire front and back tires , inserted the Tuffy liners with one hand inside, reinstalled tire side and inflated !! NEVER took a tire off the bike or tire off the wheel. Yes tube changing is a different story.

[@luisjoseph6983]

I've been rolling with mr. Tuffy's for over 15 years overall they work great and they're cheap I would recommend this to anybody who doesn't want to push there bike when they get a flat tire get them you'll be glad you did

[@capcom4eva]

Ultra light version? Never had a flat?

[@Tobi-wr4co]

Have You tried "rhinoDillos" ? Its a mr tuffy product too but with an improved formula apparently

[@luisjoseph6983]

@@Tobi-wr4co no I haven't

[@luisjoseph6983]

@@capcom4eva regular version Brown color code

[@TheVideoSlick]

You said they're cheap ?I don't think so..

[@michaeljohn7467]

On my hub motor on back tire e bike, i fixed flats n put the mr tuffy liner on without taking back tire off, i use rachet strap to raise back end of bike up off ground strapped around a tree branch or beam of roof or whatever you can strap it to People when you go riding on hub motor ebike carry a rachet strap also so you can fix a flat easier if you need to, works good when putting tire back on with tire up in air, also carry bottle of unexpired bottle of green slime or 2 bottles, this saved me a few times fixing flats, best to put green slime in before you go riding, carry extra valve stems, one time green slim messed up my valve stem n couldn't pump up tire- had to put new one in, also carry steal long valve stem remover tool- one time plastic valve stem remover tool on green slime bottle broke n wouldn't take valve stem out, also carry skinny needle noise plyers- one time valve stem got stuck n valve stem remover tool wouldn't remove it Especially on a e bike people, if you got wide tires n a heavy ebike it is hard to roll back home with a flat if you are miles away

[@phantom4255]

Good suggestions - sounds like the voice of experience!

[@michaeljohn7467]

@@phantom4255 One day I put in tannus armour inserts n only got one flat in 10 months, best thing to do unless you put motorcycle tires on

[@1nkman]

I like that wooden work stand, that's pure genius.

[@CitizenCycle925]

Haha I wondered when someone would notice that 🙂

[@ricksattler682]

Thinking of building one myself, great idea CC

[@richeyrich6855]

Wow, that wooden handlebar stand is blowing my mind! That's the video that youtube is begging for!

[@johngreydanus2033]

2024 and well worth watching just for that stand, thanks

[@snappyinc6297]

I've now got TAnnus on my fat bike and they are excellent. I had MR Tuffy but found them a nightmare to install...they slipped about inside the tyre and when I eventually removed them it was clear that they had settled inside the tyre in a series of twisty curves meaning there were areas of tyre not protected...and yes I did puncture because of it...

[@catspaw3815]

Wow, that would have popped the tire on a large-scale operation ore-mining vehicle. If I do do liners, it's gonna be the Tannus for me. I want the protection, but I want that cush ride even more. Thanks, CC

[@CitizenCycle925]

It really is one of my favorite upgrades I like a cushy ride.

[@maxmaxed2887]

Man you comparison videos are right on point every single time

[@markandrizzi9252]

I installed Mr. Tuffy’s on my Rad Mini and it reduced the rolling resistance so much it felt like a completely different bike! It accelerates way better than before! A great investment, get the 26”x4” and wrap the extra within the tire casing...don’t cut it...quick sidebar...Locktite Non-Permanent fixed all of my rear wheel spoke problems..!

[@jewboyjon75]

What spoke problem?

[@rickmercerart]

ditto, what spoke problem? spoke loosening & wheels becoming untrue?

[@noahmelville1800]

Lol dude just learned about more psi = less resistance.

[@ianmangham4570]

NAIL 💅 POLISH =The best thread locker

[@SurlyRider2019]

I do bikepacking and have used Mr. Tuffy over the past 2 years and not one flat. I’ve never tried any other type of flat guard but I’ve found something that works for me so I’ll stick with it.

[@CitizenCycle925]

ive used mr tuffy couple times now, no flats with it yet. a lot cheaper too.

[@IMBruceECLECTIC]

Great information...going to get Tannus...when that "time" comes....with no rear suspension...every piece of cushioning helps for a big person....

[@coralparadise323]

I just ordered the Tannus inserts after watching your informative. Question when I fill the tube with the Tannus inserts do I use the recommender psi in the tire or should I put less cause of the inserts. Thanks

[@markcouch4235]

I'm guessing you'll want go slightly lower, but that lower pressure might provide similar firmness and flex to the tire.

[@ohwell2790]

I have been running 12 to 15 psi in my 20x4 inch tires and the ride is fine with the Tannus liners. Handles much better than before.

[@RideTannus]

@@ohwell2790 12-15 psi sounds right. That's what is nice about our Armour. You can run lower psi which gives better control, and comfort. Cheers

[@skooterbrah]

@@RideTannus I run the CST Roly Poly 26x4.8 @ 6# in the rear, and 4.5-5# in the front. Where I live there is a lot of soft, deep sand, and goat heads are terrible problem. Are these pressures going to work well with the inserts?

[@RideTannus]

@@skooterbrah If you're riding in the sand a lot a good # to run would be 6-10 psi with our Armour Inserts. Anything below that we don't recommend really. You can play with the psi up or down to get it where you are most comfortable. Hope this helps!

[@Signetring54]

I just had a screw enter my back e-bike tire. It went through the tire and Mr. Tuffy liner, but the FlatOut sealant sealed the hole with very little air loss. Double your protection and double your fun. Their is nothing wrong with redundancy and it will keep you from walking your bike many miles, or save you time with an on-the-spot repair job. Who knows what type of weather conditions await you? I did not notice any different ride quality with both of the tire protector products. I love your videos on Rad Bike upgrades. Ready to pull the trigger on the Area 13, Bolton E-Bike, controller upgrade for my wife's Rad Mini ST.

[@aaronmason7153]

Keep the videos rolling out brotha! I always enjoy hearing your honest reviews on anything e-bike related👍👍 you have my support from Nova Scotia, Canada. Cheers,

[@CitizenCycle925]

Thanks Aaron! Will do! I have a bunch of videos in queue. 😁

[@bobburns7528]

Great video as usual and I love your clean workspace!

[@CitizenCycle925]

Not always that clean but yes I like it too

[@wapperjaw8282]

Just got an E-Bike and decide today to do some long-distance riding. Only 1.5 miles I get a flat in the rear, I can't find where anything punctured through the tire, but somehow the tube needed a patch. So here I am looking for something to prevent this from happening again.

[@iouzip2055]

I have 2 Juiced Ripcurrent S for the last two years and had the Mr. Tuffy's in both and never had a flat. I switched to Tannus Armour and Maxxis Minion tires. IMO the Tannus inserts causes higher rolling resistance vs the Mr Tuffy's. I now have 2 months on the Tannus and for the first month the tire pressure kept dropping 2-3 psi every week. If you can do a battery range test Full to flat between the Tannus and Mr Tuffy on the same ebike and tires I would like to see those results.

[@jewboyjon75]

So what do you prefer,? I just bought a rip current s also 🤠

[@iouzip2055]

@@jewboyjon75 I have converted all tires to tubeless.

[@snarklar]

That's what keeps me from getting them. I've heard mixed opinions on the resistance, but I don't see how it's not gonna be a little too squishy and slow for road use. Trails, I'll be on them all day. Absolutely. But for an ebike that spends more time on the road, I think I'd rather stick to double skin tubes. The amount a slightly too low tire slows you down, and drains the battery is substantial enough for me to skip them. Sucks because I like the idea and really want them, but I'll wait until I do up a straight trail ride. I really wish they would get on different composition/hardness options. And I mean it's not like they're super overpriced. But especially the fatties, are a little ridiculous for a little piece of molded foam. You don't really have much choice if you need them, and I wouldn't mind the price if I do end up needing them enough. But I've only got two flats in the past year, and both could have potentially gone right through the t.a. anyway. Big spike of glass, and then metal. Idk. Doubling an old tube or two has kept out the little dumb stuff, so.

[@lemix69]

I appreciate your thoughts on the tire liners, I've talked with others who bought Tannus and they pretty much said the same as you, but your the first that has done both, so I definitely appreciate your input. i personally bought the Mr Tuffies, but like you said, I didn't see any difference in the ride, while, friends that have bought Tannus Armour all said it's like riding on a cloud. I'm getting my Aventon Aventure in mid June, so I may buy Tannus Amour for my new E-bike. Thanks again, always enjoy your videos!

[@CitizenCycle925]

yep it really does change the ride quality quite a bit and i'm a fan :) quite expensive though

[@adammerritt4404]

I just got my Aventure. I am debating on which liner to go with. How has your experience been over the past two months?

[@lemix69]

@@adammerritt4404 I've had both Mr Tuffies and Tannus and yes Tannus is more expensive, but they are worth it. I put them on my Aventon and the ride is so much better and they'll handle goat heads from the west and midwest, so they'll handle anything we have here in the east. I've had mine on my Aventure for over a year and have no flats, even after riding through an area where there was glass all over the road, looked like it was windshield glass.

[@boostercontrol100]

Awesome!! I need the Tannus!! I've had atleast 4 flats luckily not far from home.

[@Landlessnothomeless]

*Want a really smooth ride? Take some baby powder (or foot powder) and put about 1/4 cup over the tire as well as inside the tire casing, dumping some in and turning the tire in your hand so the Baby Powder (talic) evenly distributes. This will make for a very supple ride as you prevent the tire from sticking to the tire casing inside which also increases chafing and hence tube wear and seam leaks). I have been a UBI Pro Mechanic and used this for bikes since the early 90's Even for ebikes too. (My first was an "ebike" but Ebike brand from 1999) For my spare tube I keep one in a ziplock bag with the talic in coating everything nice. Trust me it really makes a huge difference!*

[@deenegron6328]

I am one who was on the fence between the two. thanks for this

[@ridingradsslingingstrats2846]

Thanks for the video . I guess if Tuffy actually performs against punctures say riding on deer trails or pot holes etc .its worth the $$. I pick my haven't got a flat on my Rad yet .and I have no liners . but I can't wait to get a hold of the Tannus liners .thanks to your reviews .👍😃

[@BillTheHawk]

Bryan, you are something else! Wish you were living close to me and you could come over and organize my garage, yours is absolutely clean and neat! Thanks for the review of Mr. Tuffy's liners. I will not try them, rather I will try the Tannus Armour.

[@HeyChief666]

Exactly the video that I am looking for.

[@CraigForbes1]

I wonder how it would feel and give you confidence if you installed both at the same time. Did you also notice any major difference with the top speed and angular momentum?

[@CitizenCycle925]

i did not notice any top speed difference but really didn't specifically test that either. i would bet the foam liners might reduce speed a little, more rotating mass....

[@RideTannus]

Like CitizenCycle mentions in his comment, Tannus Armour may have a little bit more rotating mass where we are a foam insert. The two are compatible together but that's emptying your wallet even more. We feel one or the other is sufficient. Obviously Tannus being our choice! Its good stuff. Like riding on the clouds. Cheers

[@rickn346]

Would you recommend adding that tire slime AND adding the tannus armour liner?

[@johnk7851]

Thanks for giving you honest opinion. I just had ordered the Mr Tuffy and then found the Tannus liners. I wasn't sure if they'd be worth the extra coin for my Frey AM1000, but after seeing this, I am definitely ordering some. Keep up the info on E-bikes. After getting mine, I can see they are the future.

[@capcom4eva]

Frey bikes look awesome! Always wanted to test ride one.

[@danyfalcon7315]

Hey, you guys call me crazy but.... what about if I use the Mr Tuffy and the Tannus together????????

[@jasminb102]

I had the same thought!

[@markcouch4235]

Free video idea, someone grab it

[@gregorysmall9284]

Thanks for the review of the Mr Tuffy... I'm buying the Tannus!

[@randomactsofcooking]

My observation on the Mr Tuffy liners. Yes, they do reduce the goats head thorn punctures. If you get a tuff thorn and it breaks off and the pointy part stays in the tire after more riding the thorn WILL get thru the tube. Yes the rolling resistance is less, however the ride over gravel/sidewalk cracks is much rougher.

[@TheFXofNewton]

With Slime liners I've got numerous things embedded in the tire and even take small chunks out of tires, revealing the green lining without puncturing. Have had flats from thorns just missing the liner, though.

[@russelpieper4349]

UPDATE. I knew I read it somewhere, so I got out my Tannus installation guide and on page 3 under Tips For Installing Tannus Armour it states (It is common for the Amour to compress over time. It still is providing shock absorption and puncture resistance but will perform better when properly maintained. To minimize compression deflate the tires while not use. This allows the Armour compound to rebound to provide ideal performance.) So does that mean when your not riding your bike, your suppose to let the air out of the tires? I'm sorry but that's not happening. I don't know how everyone else feels, but if I would have known that earlier, I would not have purchased the Armours.

[@fatherofdragons4880]

Fucking hell Russell why do you copy paste this comment on all tannus videos? Worse part is you pretend its the first time, every time!

[@CONSCIOUS_TALK_ENT.]

Wow that sucks.

[@mousermind]

It's worth noting that Tannus doesn't claim their run-flat support on fat tires. It might work anyway, but Tannus does have that asterisk in there.

[@RideTannus]

You sir are correct! *Does not apply to the follow sizes: 20x3.0-4.0, 20x4.1-4.8, and 26x4.0-4.8.

[@CONSCIOUS_TALK_ENT.]

What is run flat support?

[@JohnSmith-tz4on]

​@@CONSCIOUS_TALK_ENT.Means even if you get a flat and there's no air pressure you can theoretically ride on that tire ymmv

[@Drew-Abbott]

I've used all sorts, from leather to the cable liner they use under the road. Pipe insulation works very well and is very cheap. I used gym rope in my bmx in the 80s

[@orionxavier6957]

I use Mr Tuffy tire liners and slime tire sealant, they stop everything except nails and screws. I've learned to avoid construction areas because they spill nails all over the streets... 😠 I'm also familiar with the more comfortable ride when I was using Schwalbe Marathon tires which had a thick rubber compound. But that was on thin tires on a hybrid bike. With fat tires you get a similar effect so the ride isn't so harsh that I would favor the Tannus armor over what I use currently.

[@Kevin_geekgineering]

why tire liner should improve ride quality?

[@PinballClinic]

Was getting crazy flats on the rear of my Ariel Rider X-Class which is a 20x4.0 size. Installed a Mr. Tuffy and have yet to get a flat in over 1,000 miles mostly off-road. My original rear tire had gotten somewhat large holes ripped in it and the tire liner started to become the tire lol. The tire never went flat, even with the liner showing through! I found the install to be not as easy as I thought. I wish the Mr. Tuffy could stick to the inside of the tire with some mild adhesive. It seemed like the liner might slide to one side or the other if you're not careful.

[@happycamper3455]

... Ive been using Mr. Tuffy on 26x4 and have 2 flats 6000 km from 3inch finishing nails .. they seem to be fairly thorn resistant... to hold the Tuffy in place i use bits of tuck tape/venture tape ..works well to hold it in place ..

[@rickyn1135]

I have to watch this again. I fell asleep last time. Lol. I was just looking at these Liners Today,on Amazon.

[@dennisyoung4631]

I used the Mr. Tuffy liners on the current build. 50 miles, and my first Flat this morning. Need to pull the tire off this evening, and find out what the cause is. There’s a trick to inserting liners - insert an aired up tube to hold the liner in place, and go around the rim about 30 degrees at a time, tucking in the liner a bit at a time, then checking that it’s centered before popping it on the rim…

[@duanim1]

I got the 2 of those the liner and tannus that is my project to install the two together maybe you would considering do one video installing it and do some test riding

[@duanim1]

@SOLACE NO PROBLEM SO FAR LITTLE HEAVY

[@pauliedriver4127]

Great video I’m new to ebikes and and have a Rad rover 6 with tannus liners coming this year thanks for a great demo on liners new sub great job

[@GentleRailings]

Tannus is excellent, but I suggest you use a good, durable inner tube. I had a rear flat though I had a Tannus installed. No puncture, but maybe the inner tube just failed.

[@kennethcampingdiary1976]

i use both tire Liners and tannus armor and work great

[@JoeKubinec]

Ken... so you use Mr. Tuffy's in combination with the tannus? Did the ride change? I commute 31 miles round trip each day with my Rad City 5+ at relatively high speed (around 23mph) so I want as little rolling resistance as possible and I really don't want a "squishy" ride. Can you give me some advice please based on your experience? Thanks.

[@kennethcampingdiary1976]

@@JoeKubinec yes i use both since my tyre can fit both, i cant feel any different about rolling resistance as i ride my bike for 15+ hours a day for foodpanda work

[@JoeKubinec]

Thanks for your reply... what size tire do you have? Thanks again.

[@kennethcampingdiary1976]

@@JoeKubinec miy tire size are both 27.5 /2.8 i also use thicker inner tube too

[@kennethcampingdiary1976]

@@JoeKubinec migh be overkill but i feel alot safer this way lol as it my working bike to make money dont want to have any downtime

[@TheOceanMan-xc7qp]

Thank you yet again...I will be getting a pair based on your review

[@440pressurewashing]

Could you link ware u got tire pump

[@melvinbelcher7606]

I got a large staple in my rear but the liner deflected it.

[@RideTannus]

That is awesome! That's the goal. Cheers

[@RideTannus]

Great Video *CitizenCycle!* You're hired! 🤘

[@DYNABIKE1]

I started with Mr. Tuffy's and after 1,200 miles through every kind of terrain I have yet to get a flat - - ->>>.

[@michaeljohn7467]

What about those thorns in the desert or whatever there called, did you ride in the desert where those are at? When i ride in the forest in flagstaff Az i never got a flat, but on side of interstate from flagstaff to bellemont i got a flat one time

[@mousermind]

Thank you for your review, CC.

[@CitizenCycle925]

My pleasure!

[@B.Kind.Circle]

What’s it like using both at the same time

[@aznsushi41]

Can you put the liners with tannus?

[@jamessimpson5051]

Shortly after buying my Rad Rover I got a flat, got it fixed and a week and a half later got another flat and had another flat and had to walk 3 miles back, that was it for me, I ordered Mr Tuffy liners in it and put 8,000 miles on it, gave it to my brother in law and the tires are bald and still no flats, I swear by them for the price.

[@jefbiggs1583]

Wow thanks for that

[@jamessimpson5051]

@@jefbiggs1583 the only downside is they don't protect if you were to get a puncture on a sidewall but I never had a problem and did ride off the beaten path as well, I retired my Rad Rover for a dual hub AWD 1000 Watt E Cell, I love it happy riding.

[@BrianMikasa]

Can you use Stans or Slime with the tannus liners?

[@kevinmccune682]

Nice guns,like your presentation, no "eeees and uhhs" and you are getting more knowledgeable all the time, keep up the good work!

[@flolou8496]

Is it a good idea or not even recommended you use Tannus foam liner in cooperation with puncture resistant tubes for double protection ?

[@mark3010]

I just saw a video where you can install them without removing the tires I’ve got some Tuffy liners coming I’m gonna try it.

[@donpet8258]

Daily riding tannus for little over a year. After a flat puncture in center of tire. I notice the 1/2” center foam compacts as thin as sidewalls. Thus the flat. Great when new. And Who’s gonna let their air out daily just so they last longer,

[@joebyrneMensrights]

Same thing happened to me . causing 2 flats until I figured it out . I had to walk my bike back from a long distance the last flat .

[@alant5335]

Always a pleasure to whatch and look forward to.

[@CitizenCycle925]

Thanks Alan!

[@trollhunter8842]

Can you use these for electric scooters to prevent flats?

[@stevenbenavente1229]

Lol don't kid yourself. Since I bought a fat tire ebike I had 4 flats & it's always the back tire, now I got tire liner & tannus armor & slime in tube. I never had a flat on my 26x2.50 tire. Them damn 20x4 are a MAGNET

[@jaydenthach9456]

When you buy the tennis armor do they give you one or two

[@qjarman7753]

On your advice I’m going for Tannus on both my bikes 😊

[@RickyEats]

Where you bought that ebike?

[@mborowski2010]

So I'm switching to Lee Studded tire since winter is here and I wiped out 3 times on the first snow day. Do you think the tannus foam would help make the studs work better, or perhaps worse? You say it's a softer ride so I kind of feel like it would help them get a better grip on ice. I think you sold me on Tannus just now. $160 with tubes I'm about to hit pay.

[@SpregioCheeks]

Just installed my tannus liner on my rear for my himiway. I popped it right at the beginning of winter, a little thorn did it in. But I haven't done the front yet, but was gonna just start with the rear. Giving her a charge now, and am excited to give it a feel. I saw a video that says you can just do it on one tire and it'll be fine. Have you rode with only 1 liner in?

[@haroldkerwinjr3026]

Can both be used at same time?

[@frankconti7529]

can you cut it like a duct tape by the time you tuck it inside the tire shield?

[@mica7966]

Lol I just ordered tannus armour for the altra duo yesterday and now watching your vid had 2 rear flats like you say mite as well have a nice ride to ..

[@000MACK000]

I was thinking use both double the protection

[@scoop4321]

You should mention the weight factor. Which one weighs more, Tannus, or Mr Tuffy?

[@Sherman1862]

With the Tanus do you think I could install 2.20 Slime Tubes in a 4 inch Tire since the Tanus Insert will displace a lot of Tire Volume?? Also, is the weight difference between Mr. Tuffy and Tanus very noticeable?? Thank you! Great Content and very Helpful!!! I'm getting a Wired freedom this month!!! Getting ready for its arrival and already planning upgrades. PS I hate changing flats while on a Ride!!! ; ) lol

[@grizzlieschannel2324]

I have both Mr Tuffy and Tannus in the rear and have NEVER had a problem. Have just Mr Tuffy in the front ands all is well Just FYI

[@chaguito69]

Can you do both???

[@MER1CA_1st]

@@chaguito69 you can do both, but if you're on a budget mr. Tuffy is the way to go. I have a specialized fatboy & have mr. Tuffy on both front & back. Easy to install & it does the job on the base of the wheels. If you're an aggressive rider & go thru bushes, you might need the extra sidewall protection & Tannus would be your best bet🤔

[@chaguito69]

@@MER1CA_1st nah i have a sondors fat tire just for commute , the stock tires are fat in diameter but they are really thin that you can feel it at touching it

[@JoeKubinec]

what size tires are you running both the tannus and tuffy on?

[@aforgottennativeamerica8439]

I made a pedaled fat bike so I'm wondering how much weight the tannus foam inserts add to the bike?

[@derykmacleod4979]

I added the tannus armour to my diy ebike, a 2019 Montague Paratrooper and a Bafang Mid Drive. It was hard getting the tube and tannus on the 1.95" tires I have on the bike. My next build, hoping to be my reward when the fed finally approves my disability I want a fat tire recumbent electric mountain bike! i tried a ride at the beach and it was a nogo. I am running 20lbs of pressure in the innertubes I do like the softer ride feel.

[@TunaSoda]

Correct me if I'm wrong but the Tannus doesn't run flat with 26x4 tires right?

[@PillCosby407]

Great video I have a Ariel Rider D-Class there tires are 24x4 what size. Should I get because I'm confused by the way measure tire si

[@simonwalter7142]

Did you ever get a flat?

[@vieuxacadian9455]

I have been running liners since they first hit the market , ugh ,,, 22+ years ( gee now I 'm old ) . Those Tannus look interesting . In the 1970s bmx riders had solid polyurethane " Honeycomb tread" tires . Some loved them and some hated them .

[@vueyang9219]

Will them thing fit and goes with the ariel rider grizzly..?

[@GarrattHamster]

Have you checked the Tannus liner? I am now seeing reports about these foam failures.

[@craighightman541]

If you use the tannus in your tire does it change the air tire pressure? Like say if you run 25 and you use the tannus would you put 20 because it is now less room because of the padding?

[@winners160]

UPDATE VIDEO DID YOU EVER GET A FLAT ?

[@geraldhettel3824]

I like you handlebar holder. I need to make 1 for myself.

[@JHOFF111]

Aren't u supposed to wrap that on top of the tube? U seemed to shove both on there, idk, how do u know it's in the correct position?

[@CitizenCycle925]

the Tannus is shaped just like the tire, i usually stuff it in there first then slip the tube inside it. you could also put the tube in the tannus first then shove both in the tire at same time, either way it pretty easy to fit.

[@vendettarules1]

OMG what are those wall hangers?? Thats what I need!

[@CitizenCycle925]

Steady racks, They come in fat tire and regular tire sizes.

[@vendettarules1]

[@mctdj78]

Question do you have to use the battery on the E bike or can you just write it like a regular bike and choose when to use the battery

[@CitizenCycle925]

You don't need to turn the bike on You can ride it as a regular bike with no power

[@gustavojimenez5843]

This liner are expensive but ended up buying a 20x4 and 26x4 for my 2 big sur ebikes. Pain to install them. My question will be , do I leave them like that, or should I go tubeless? By the way a have the tannus the other ones can cause punture between the inner tube and the liner if the psi is low and ride it like that

[@dennispelz9713]

Where did you get the stand under the handlebars or did Thanks you make it?

[@CitizenCycle925]

I made it

[@jesus-xr9yo]

Tannus looks cool

[@stevemullin1195]

I ride a recumbent trike and have the tannus airless tires. But thinking of going back to Schwalbe Big Apple Plus tires 2.15" wide and put the Tannus Armour in....wonder what this does to the rolling resistance. Looking for a tire for riding on gravel and rail trails along with roads.

[@nataldiego]

How was the Mr. Tuffy líners? Do you had any puncture? Nice video very usefull info🤙🏽 gracias 👍🏼

[@CitizenCycle925]

have not had any punctures, seems to be fine, don't really notice they are in there...

[@dixienormis3614]

Is it true that Tannus flattens out over time and becomes useless?

[@CitizenCycle925]

i have taken it out before and yes it gets pretty thin, i think the higher you have the tire pressure the thinner it gets.

[@dixienormis3614]

@@CitizenCycle925 Thanks, after watching your video I went with Mr Tuffy's, so far so good! Thanks for the great content my friend!

[@CyclingAroundToronto]

Thanks for this video, I'm on the fence between Tannus and Mr. Tuffy for my e-bike...

[@TheRobbieg2006]

Do you use the green slime stuff that goes in the innertube for extra protection

[@christopherperry4212]

I have a 20” x 3” fat tire EBike , what size Tannus tire liner do I buy

[@kengunnett2017]

The question not asked or answered, what about both? When I do Mr. Tuffy, I use strips of black tape to hold the liner to the tube, and when it gets to a certain pressure, the tape releases but everything is in place.

[@emaguigad]

Hi CC - great video as always. Would it hurt to put the liners and tannus or is it overkill?

[@noahmelville1800]

Better Idea use the knew cement block tires. They are impervious to flats, and stay at a constant 100 psi!

[@myreligionisreality3677]

I've had the tannus on my Radrunner since March this year. Only 1 flat and that's because some A-Hole shot at me with a Pellet gun. How do I know I was shot at? The Pellet was inside my Rim when I changed the Tube. 😡