High Voltage AM Transmitter equals FUN!

Let's check out the Globe Scout Model 40A Transmitter. I purchased this to do a restoration video, and got a surprise inside! To learn more about electronics in a very different and effective way, check out my Patreon page. Click this link: / mrcarlsonslab

[@MrCarlsonsLab]

To learn more about electronics in a very different and effective way, check out my Patreon page. There are many more videos there, and I share some of my very unique circuit designs as well. Click this link: www.patreon.com/MrCarlsonsLab

[@tomasbongren]

Mr Carlson's Lab mvh Tomas

[@thevacuumtubejunky9774]

Mr Carlson's Lab : I love your videos, My Father was a radar engineer for Lockheed Aircraft Service he had a ton of those bakelite crystals and used to hand trim them to a specific frequency back in the day, quite a long lost art form in my opinion. Thanks for sharing. Kind regards, Eric Dee

[@adamrose5226]

Mr Carlson's Lab I was wondering if I could get you to build a nixie tube clock that I could buy from you or maybe a kit with directions how to put it together

[@SRRS478]

Mr Carlson's Lab awesome videos thumbs up keep up the good work

[@jasincolegrove6651]

I’m not one who usually buys into online stuff. But I’ll take the dive and see what’s up. I enjoy electronics and I’m always looking for more insightful ways to learn

[@erdingtown]

i am 78 years old now, but when i was a kid in detroit area, W8BXO, doc. weston, taught me everything about ham radioˇ bless his souľ Great show

[@joed2392]

I had one of these when I was a kid ! I was going to a class to learn CW and theory, on my way to get my novice license ....! It worked pretty well, the ham I bought it from showed me all about the HV items and how to tune it up. I can still the remember the smell of the dust burning on the tubes ! lol

[@markvietti]

Mr Carlson you have the perfect voice and tone for your videos. very professional.

[@woodywoodlstein9519]

I would have given my left arm to have your tutorials on demand when I was 10 years old and even younger. I had no information back then. Just fascination , electrical toys to take apart and the odd electronics project kit. So great Carlson Thx.

[@frankowalker4662]

I could'nt agree more.

[@SeattlePioneer]

I remember building my first CW transmitter from an old television set purchased as junk from the Salvation Army thrift shop for $1.00. I salvaged the excellent power transformer, but I was very fearful about putting the transformer primary across the 120 VAC power -----that would be a short circuit, wouldn't it? So I studied up and learned something about inductance and reactance. My one piece of equipment that I designed, built and operated entirely by myself was a telephone answering machine. This was circa 1970 when home answering machines really wern't available at all. I used a capacitor across the telephone circuit and when the ringing voltage came from a call, that voltage went through the capacitor and triggered a relay, set up as a locking relay. That turned on power to a couple of tape recorders, and power was witched between one that play a message on an endless loop of tape and then a thermal time delay relay switched to a second tape recorder that recorded a message. Worked reasonably well, and I never got in trouble with the phone company! I had everything nicely packaged in a plastic box. Don't ask me about the OTHER box that allowed me to receive long distance calls without the caller being billed for them....

[@billysharp3388]

I had an old war era transmitter I found at an auction in Summer of 1969 right after I got out of the army. It was missing a tube so I wrote to the Army Base I had been at for information and they sent it to me and I was able to turn it on and check it out, I sold it to a family member who was a abnormal ham in the family who made ham radio his life not a hobby and he used it, good memories. Thanks Paul.

[@Moonwalker917]

I was having a really bad day, then I saw your video and while my day is still kind of bad, it brings some sunlight into it. Thank you!

[@willrobbinson]

dito

[@garbleduser]

Same here, pneumonia on a holiday off because someone wouldn't stay home while sick...

[@Roflcopter4b]

@@garbleduser Where do you live that you couldn't claim the time as sick time instead of holiday?

[@rot_studios]

"when people took responsibility for their actions" true words right there. Great video yet again mr. Carlson. Love watching these!

[@Falcrist]

I don't think there has ever been a time when people have been particularly inclined to take responsibility for their actions.

[@JerryDodge]

At least they did back then more than today. Cartoons in the 1990s didn't have to warn you "don't try this at home", because people weren't completely dumb back then. Nowadays, people use their brains less and less.

[@n2n8sda]

Falcrist some people indeed shy away from responsibility, perhaps better to say held accountable. If you touched the b+ it was usually your own fault, you didnt sue the maker because the possibility of being injured existed.

[@Falcrist]

As you go back in time, you see that people are less and less likely to be held accountable for their actions... not more (at least in part because almost everyone carries a decent quality video camera in their pocket). Education and intelligence levels are slowly increasing.... not decreasing (at least in part because if you do something stupid, you'll quickly find yourself on youtube or facebook as an example for everyone else). And I was warned PLENTY of times in the 80s and 90s not to try things at home. What the heck are you people smoking?

[@redemptusrenatus5336]

Not the same crap you've been smoking, apparently. I disagree that intelligence levels are slowly increasing. People are still doing stupid things and it seems even stupider things nowadays than before. The whole YOLO and ensuing idiot maneuver that inevitably followed comes to mind.

[@daveschmarder-US1950]

Great video! My first transmitter as a novice was a Globe Scout 680a, very similar to the 40A. That 5 pin connector in the back that looped the heater and B+ through it was used for when out in the boonies. A 6 volt storage battery would light the tubes and a dynamotor or vibrator pack would provide the plate voltage. Many older receivers had the same loop through plug/socket. My dad was a ham too. Today he was born exactly 100 years ago today. He has long passed though. But it was cool to see this today. Dave-N2DS

[@MrCarlsonsLab]

Thanks for stopping by Dave!

[@Satchmoeddie]

Someone threw away the dynamotor for one of my radios. He thought, and rightfully so, it was an old automotive part.

[@gammaraymonkey]

Im a new broadcast "engineer" hire. I am in awe of the ingenuity and brilliance of the engineers before me. I feel really dumb when I look through their old mods and hand drawn schematics. I fell into this job and want to say thanks.

[@W1RMD]

Yes, I want to see the modifications! Thank you for this beautiful piece of vintage gear! 🙌

[@BonesMcoy]

So much of this just goes over my head, but I still enjoy watching these videos.

[@sevensystemscross-platform1701]

"This was built in the 50s, an era when people still took responsibility for their actions" 😂 Couldn't have put it any better!

[@alainrouette8149]

Well said! That really struck me as I'm from this era...things were simpler then and developed situational awareness as a bonus.

[@toresbe]

I feel like an electronics engineer that is willing to sell something with exposed high-voltage wiring to hobbyists' homes where children are liable to get at it isn't really taking responsibility for their actions

[@PolygonSwan]

😂

[@1djbecker]

@@toresbe I completely agree. It would be trivial to put a shield over exposed line-connected and high voltage terminals. It was irresponsible to leave the 120V relay screw terminals exposed to anything that might drop across the closely-spaced terminals.

[@devtrash]

bummer for those that did that and still had accidents and died.

[@gregmcalister7928]

I love this tech Im 64 years and studied the old hetdrodine tube type tv and radios. Dont see much of this at all anymore. Thanks for the video.

[@MrCarlsonsLab]

You're welcome Greg!

[@danielepatane3841]

An era when people took responsibility for their action: how true this statement!!!!!

[@michaelshultz2540]

Love seeing your vintage electronics presentations .I began my journey in electronics at the age of 12 am now 62. You are absolutely the best instructor. You remind me of a couple of my first instructors in advanced electronics and color television design and circuitry classes in 1971 @ ft. Bliss & 1975 Homestead afb . And of course my father who started it all and i learned about radar and guidance systems from. THANK YOU !

[@Veetheoneandonly]

Great video. When I first got my general in 1959 I built a Globe Scout 680A which was similar to this one, but ran more power. You have a great way of explaining things!

[@blakewerner4368]

thank you most kindly for taking the time to fully explain what (and how) is going on with these circuits, you are definitely an old school ace, a rare breed these days....and...who knows how to explain it comprehensively to boot! thank you sir.

[@MrCarlsonsLab]

You're welcome Blake!

[@rongross5170]

Yes, please show modifications! I had one of these back in the late 50's; brings back a lot of nostalgia...

[@1stPCFerret]

Wow! This takes me back to the 1950's when I was a boy and did all kinds of things like this. I don't know how many vacuum tube radios and TV's I scrapped or repaired back then. But then I went away to college, discovered computer programming, and that changed my life forever.

[@matthijshebly]

Always impressed with how good of a communicator Mr Carlson is. Literally everything of importance is explained, proper safety warnings are always given. Another excellent video!

[@kardeef33317]

I want to add his electronics course is the best I have seen. It also covers surface and through hole, tube , and PCB making.. Awesome course !!!

[@WillemV369]

I don't know that much about electronics, but watching you doing your thing does three things for me: 1) Total relaxation. Seriously, watching your videos takes the stress right out of my day. =) 2) I learn lots of things. Your explanations and methodology alone are worth a college course. 3) It inspires me to dive further into the world of electronics myself. I love old electronics. To see them restored and appreciated so much is very satisfying. Thanks for doing this.

[@josephf151]

Yes please to the modification video!

[@syfr]

No modifications needed please!

[@douglasgagnon1153]

Boy did you bring back very fond memories, owned one of these in the early-mid sixties when I had my novice license along with a National NC 303 receiver....thank you Dad, (miss you).

[@stevenkaeser8583]

“An era when people took responsibility for their actions.” Love it 😊

[@carlstout4546]

you make me miss my former head tec. don foster so much as i am now 78 and sow much water under the bridge so to speak ( we were in portland , or. usa ) thank's carl stout . can't beleve i have forgot so much !!

[@throttlebottle5906]

another fine quality natural selection helper device, we need more things built that way ;)

[@ProperLogicalDebate]

There must have been Elmers so that you would learn without the shock.

[@WitchidWitchid]

@@ProperLogicalDebate I received a nasty shock one evening when working on a 100 Watt class plate modulated transmitter. I had it powered up into a dummy load, plate voltage on full, and I have the meter connected and was adjusting a sliding tap resistor with a screwdriver while monitoring voltage to the modulator tubes. At some point I got a bit careless and my index finger touched the metal stem of the screwdriver while my left hand contacted the chassis. I got full DC plate voltage in one hand, through my heart and out the other. It knocked my across the room. For a few seconds I saw a bright flash then stars, had a metallic taste in my mouth, felt off balance. When I recovered a few moments later I could smell burned flesh where the current entered my right hand. It was a painful shock and when I think about it I can still feel it to this day (it happened around 20 years ago). Since then I never entered my hands near a transmitter (or any HV device) with it plugged in and the power on. Even if I am making adjustments it gets powered down, unplugged and discharged first before my hand gets anywhere near the insides.

[@Travis141123]

A "thumbs up" FROM Mr. Carlson is very high praise indeed...

[@kevinbyrne4538]

I wish that I'd had a video like this when I started in electronics years ago. Well done, sir.

[@henrylesesne5525]

What a great video. I operated a Globe Scout 65A, a later version of this one, when I got my Novice license in 1955. The Globe Scouts were very affordable but unrefined. Constantly replacing the transmit switch was a way of life for owners. The AM modulation was ‘screen modulation’ which is a cheap technique. These were typically used by novices on CW. I bought mine new and paid $ 100 wired and tested. A kit version was available for a few dollars less.

[@committments]

Huge fan. Just started watching your channel a few weeks ago and I’m going to share to my music groups which are large and recommend everyone to watch. Not only informative but fun to watch for all. Keep up the great work and I’m learning alot so maybe i can fix some of my old vintage gear for my pro recording studio since im a producer, engineer, songwriter and multi instrumentalist and love using vintage gear and also just opened my own record label so i put your channel on on the big screen for all my clients to watch on breaks. Knowledge is power to all. Sincerely, guitar Michael hordorwich

[@committments]

Oh and also do you have any spots open for the $20 patreon left. I got a plethora of vintage gear for my Recording studio i need to get back in action and need help. Thanks again. Sincerely, Michael hordorwich

[@MrCarlsonsLab]

If you're interested Michael, sign up, I will let you in on that level. Thanks for your kind words!

[@committments]

Mr Carlson's Lab thanks look foreword to it.

[@committments]

I signed up for the $20 level and i guess need to learn how to navigate now. Im on there now. Thanks. Michael

[@MrCarlsonsLab]

Ok, Talk to you there.

[@JerryEricsson]

That tuning reminded me of tuning up the old radio teletype sets back in the 1970's they were some powerful units, could talk around the world with them if you had the right antenna, we took over an old marine compound back in 1971, the jar-heads had two poles that had to have been over 60 feet tall with antenna's strung between them every so many feet. Buddy of mine had to strap on some Gaff's and climb those poles to tear down their sets and replace them with antenna's cut to our frequencies. Now I took the Field Wire-man course back when I first enlisted in the Army and we climbed poles for a week, but I would have been scared to death to climb that far. Ah well, I do envy that old buddy of mine; haven't seen him since '71 but I did hear from him in '77.

[@overkillaudioinc]

I have learned so much about transmitters from these vids!

[@bigmac965]

Yes, Mr. Carlson! Hot rod the Globe Scout transmitter, please! I learn something every time I watch you work on this old gear. Today I learned the meaning of 'dipping the plate current', something I've always been curious about. Thanks!

[@marklange8894]

Love it! I started out in my teens working on old black & white TV’s then tube type CB’s. Grew up in far West Texas (120 miles to the closest city, El Paso) so I didn’t have much access to any other gear. After high school and marriage I went to a tech school and was in the first class that didn’t teach vacuum tube theory. So I learned it pretty much on my own, so I really enjoy watching and learning more and more about the nuances of vacuum tubes. I am currently restoring a 1929 Radiola receiver and man has that ever been an education. Hand wound wire resistors “cards” for lack of a better term. “Mystery” components as they are referred to in the literature, which just turn out to be a negative feed back variable capacitor, but Radiola was not labeling it on the schematic in an attempt to skirt around a German patent on the circuit design. Wholly different world than other vacuum tube gear I have previously worked on. GE Pre-Progress, and Progress line, Motracs, and Mastr II and Micor high power base stations & repeaters. Great video Paul. Side note: I was taught that a pi network was called that because the schematic was shaped like the Greek letter pi. Please “Hot Rod” that transmitter, I would love to see your improvements to that circuit.

[@williamyorkolepossum]

Oh what memories you have brought back. There was the Globe Scout, Globe Chief and the monster Globe King. I still have much of the old AM transmitting equipment like an ART-13 from WWII Aircraft. Lots of high voltage there. LOL

[@MrCarlsonsLab]

All great equipment!

[@MrJob91]

A modification video on this RF amplifier would be marvelous Mr Carlson! I'd be interested in signal clarity and RF power increases for example.

[@Rems61]

I still have a Globe Scout 680, that my dad built from a Kit, back in the mid 50's. He or I could never get it to to work with a VFO. Worked great with crystals. Your video has Inspired me to drag it out and preserve it, Been in storage many years. Thanks for your very informative video.

[@floriotj]

I know you're just being diligent when you warn us about the high voltage and the like but I'm guessing most of us who watch your videos come from the school if you stick your finger in a light socket it your fault not the company that made the light socket. Love your videos. I've learn more than I care to admit watching your videos. Thanks for taking the time to produce them.

[@leonardpadin869]

He does it because of possible liability is my guess.

[@dougstrong696]

That's just what I did when I was a kid, stick my finger in a light socket to see how it could light that bulb. I found out.

[@floriotj]

@@dougstrong696 Every curious kid did that ONE time.

[@bassman7115]

Hello, Paul. I just wanted to say, thank you for sharing your knowledge on vintage electronics. I grew up basically tagging along in my grandfathers Radio/TV shop. Just recently, I decided to restore some old equipment. Your channel has been such a valuable resource for me. I look forward to following along on Patreon as well. Keep up the superb work and your passion for teaching electronics.

[@MrCarlsonsLab]

Thanks for your kind comment Jeremy!

[@alainrouette8149]

Wow...beautifully made and crafted transmitter! and equally beautifully made videos Mr Carlson...although a little bit much addictive ;) ..can't stop watching one after another...I appreciate the high quality of your scripts and communication style. Thank You and Keep-on the good work!

[@robertphelps41]

Another great master class in appreciating useful electronic gadgets from the golden era ! Very much enjoy the value of your experience and knowledge in this field, and safety warnings not to attempt working on these without proper methods and understanding. Between you and Uncle Doug, I have returning interest in electronics that I had a young man. Thanks for your effort !

[@euro9115]

Very cool, thanks for showing how the old tube circuitry works.

[@MrCarlsonsLab]

Glad you liked it!

[@flhtcui2000]

Smiling! Back in the 80's I worked for Missouri Radio Center/MOcom. The owner took in an old WRL Duo Bander 84. World radio labs. I gave him 15 dollars for it, took it home. To my surprise it worked on 80 and 40 meters, after I cleaned it of all the hay and bird poop. Took it out of storage a few years ago and not working so good. Your video may have inspired me to try and get it running again,

[@anandarochisha]

Awesome, Thank You !! Mods are most welcome!

[@savoyblue777]

I've always loved electronics and poked around with it. You have got me hooked on playing with vintage systems Thank you

[@marknesselhaus4376]

Ahhh, the good old 6146. Years ago, Just about every transmitter I had, used them and never a problem. My first was a Heathkit DX-60B as well as a Johnson Viking II. I miss them now as I homebrew solid state these days :-)

[@jaut-76]

This is the video which I credited for giving me interest in amateur radio licence. Ever since this I saw this video and got my license I’ve been hunting around for globe equipment (which is extremely rare in the uk) and hit the jackpot a few weeks ago with a globe king 500B tx just 100 miles from me so I’ve just got to get the full license now. Keep up the good work making sure this stuff is saved. M7BLJ Jake

[@JasonCarlson]

As a ham this is a great looking rig! Pleasure to just watch the thing come to life.

[@larrythecomputerguy]

Thanks for article! Reminds me of my early ham radio days (ex-WA2YTO) and my original transmitter, an EICO 720, also with a single 6146.

[@BruceBoschek]

WRL made great equipment. I enjoyed watching this video very much. I had the Globe King 400C that put out 400 Watt on AM. It was rock solid and I had all the coils for the 20 - 160 Meter bands. I had a Johnson Viking 122 VFO and a wonderful National 183D Receiver. There are a couple of pictures of me with my rigs back in 1958 on my Facebook timeline. My call sign was K9BYI. I got my novice license when I was 11 years old. Looking forward to seeing more videos on older ham gear.

[@MrCarlsonsLab]

Thanks for taking the time to write Bruce!

[@garygreer1854]

My Dad had this radio back in the 50s. I have always wanted this transmitter, good find. I have my ham license too, but ham radio is not like it used to be back in the day. I see the old filter capacitors have been replaced with a bank of new electrolytic caps. Electrolytic capacitors become trash after 10 to 15 years.

[@MrHDtom]

B+ is Battery plus . Hey Mr CARLSON i am totally fascinated by the way you are teaching us vintage and nowadays electronics. w2aew and you are two of my favorite electronic - channels. Thank you and many Greetings from Hamburg Germany .!

[@CEverett55]

Ahhhh, another video featiring the smooth, dulcid voice of Mr. Carlson. Nice....

[@brucegordon7248]

Very informative and explained very well. The only thing that I would have liked to have seen, was how the cw note sounded and what the a.m. modulated signal sounded like through a receiver. I gave you a thumbs up for the video.

[@WitchidWitchid]

I have several vintage 1950s AM transmitters like this including a Globe King 500, made by the same company that made the Globe Scout. However the Globe King is considered a "500 watt" transmitter consisting of 3 decks mounted in a rack. Namely a power supply desk, a modulator deck and an RF deck. It is basically a 4-400 tube modulated by a pair of 811''s. Also have a couple 100 watt category plate modulated transmitters including a Johnson Viking 2 (early 1950s) and a Johnson Viking Valiant (also 1950s). I've had them all on the air at one time or another. Just for the record I am a licensed ham.

[@fliggityboo8687]

Terrific video, you teach me so much! Thanks Mr. Carlson!

[@MrCarlsonsLab]

My pleasure!

[@158henrybond]

Perfect video me, thanks. I'm in the process of homebrewing a AM valve based transmitter. :) Good caution notes on high voltags :)

[@LJJKD1947]

EXCELLENT video!, I was the kid(old dude)in the remote class room with his hand up all the time while you were going over schematic by the way ,Ha

[@KG5IF]

Thank you sir for another great video. I still use my old Swans. Also like you informing the new folks about B+ and its potential for being lethal and being responsible for your own actions.

[@JerryDodge]

I always love watching old stuff get a makeover for the modern times :)

[@ohger1]

"when people used to take responsibility for their own actions" Subscribed...

[@chrisnordstrom6652]

My vote is probably too late, but I would love to see your mods to this unit. I'll poke around, maybe you already did one. F.Y.I. I spent my first two years in the Air Force working on AM avionic transceivers (AN-ARC793 and AN-ARC546) that were installed on the F4 fighter. Lots of fun with tubes and high voltage and motorized mechanical tuning. We eventually retrofitted these planes in 1981/82 with an all solid state modular unit AN-ARC164. Back then I had all the latest and greatest test gear that I don't have now. Thanks, Mr. Carlson, VERY interesting and instructional video.

[@russelloliver9903]

Thank you for explaining how the circuit works, very educational. I enjoyed it very much.

[@yuppiehi]

I'm so glad you've decided to depot the transformer from the previous video. That's going to be so cool to watch!

[@peternilan4276]

thank you great to see the old transmitter and i would like to see this transmitter give a make over and made safe!!

[@KurtZoglmann]

Wow. I have never seen an older tube-type radio in action. What an excellent presentation! Modern transceivers make things so much easier and a lot safer! I would love to build a tube-type transmitter one day and operate CW. I have a passion for Morse code. 73 de AD0WE

[@budandbean1]

Mr. Carlson, Thanks so much for every video you produce, especially your Patreon Videos. I learn so much every time I watch one and I’m amazed that I’m retaining a lot of this information. I’m also having a great time learning. I also learn a lot just reading the comments and your responses. You make the answers to so many of what seem to be, very complex questions, seem fairly simple just the way you answer them. You are such a class act.

[@MrCarlsonsLab]

Thanks for your kind words Buddy!

[@paulepruss]

I would very much like to see more RF / HF, Tx, Rx projects Paul. As a new Amateur and a Patreon following along in your Electronics Course, I'm finding your training highly instructive in working towards my Advanced license. Many thanks!

[@MrCarlsonsLab]

Thanks for your feedback Paul!

[@subzerolives]

@@MrCarlsonsLab I love listening to HF although there's not as many Stations online as before, maybe you can include repair of some of the classic receivers from this period Grundig Sony etc. Thank you.

[@lcotelaw]

Loved the video - it takes me back to when I was a kid in the 70s and my Heathkit DX-60B with a matching Heath VFO.

[@the1spyderryder]

Lol i know mine was a Heath Kit DX 100. It had a pair of 6146s and the parasitic suppression didnt work well. I had to stay on top of the tuning especially around 10 meters or the plates would turn cherry

[@bobfanning6816]

Please show your improvements. I was first licensed in 1958 so I spent a lot of time inside the box where high voltage lives. Transmitters were dangerous but amplifiers were worse!! I still have several, home built, amps running a pair of 4-400. Years ago, 4-400 pull outs from commercial radio stations were available for around $7.50 each.

[@MT-ni1id]

Wow. I just stumbled across this channel and I love it. I grew up in Omaha, NE and it was always a real treat to cross the river and visit World Radio Labs. I was too young to really understand much but I loved it. I finally got a real electronics education in the Navy in the early 70's and made a career in the civilian world of military electronics. I see so much familiar old test equipment in your lab. So Awesome. The saying we always had was "It's not real o scope unless it's blue and made in Oregon ". I'm now subscribed and looking forward to exploring this channel. I LOVE BOAT ANCHORS.

[@1607rosie]

I'm trying to learn or relearn some electronics. I really enjoy how you talk about how they were used in the past. The bit of history you add is cool, great channel. I remember going into the drug store with my dad and checking tubes to see if they were bad. They had a setup so you could check many tubes and below the tester there would be a cabinet filled with new tubes.

[@USMC-Sniper-0137]

I have fun when I visit Mr. Carlson's Lab!!

[@johnopalko5223]

Interesting video as always, Paul. Thanks. I was surprised to see that you detuned the final tank circuit to get more output. I was taught that you always tuned for the dip and used your loading control to increase the plate current (and output power). So, the procedure was dip, load, dip, load, dip, etc. until you got the maximum plate current (up to what is safe for the tube) possible, but were still at the dip.

[@brettbrown2038]

Modifications are always fun. Would love to see them.

[@researchandbuild1751]

You definitely have the most interesting channel on youtube. Excellent topics

[@robj1646]

I love your videos, they are so clarifying and very well made. A small note on the filter network at 18:00. I guess that all technical people know the Greek letter pi and this is what gave the filter network its name (the two capacitors being the legs of the letter pi). It would maybe have been worthwhile mentioning this, instead of calling it a "pie network"... I also own an ancient 20 m HF transmitter which was homebuilt by a radio ham back in the 1950s I guess. It has a separate power supply with also a connector at the back, for the separate RF chassis, and has all voltages exposed. I forgot how the plugs should be connected, so I have not powered it up for a long time and I'm reluctant to do so in the future. I used it for my very first CW QSOs on 20m. Pure nostalgia...

[@lmaoroflcopter]

Can't wait to see the modifications you have planned for this and would really love to see the electronic antenna switch you briefly mention in the beginning.

[@pierrelataillade7564]

Very nice class Mr. Carlson..... Enjoyed the schematic part the best, thanks

[@1ytcommenter]

I love the videos of Mr. Carlson. He is truly the Bob Ross of Electronics.

[@waynethompson8416]

Yes, please do "soup it up" on the Globe Scout! The first transmitter I ever had was a Globe Scout. I missed it so much that a few years ago I found one at the Huntsville Hamfest and bought it. Sadly, one of my X's family stole it and I no longer have it. Have not seen any since the last one that I bought. Looking forward to the "depotting" of the transformer too.

[@stevedoubleu99B]

Thats the great thing about electronics, whatever sphere one is into, and no matter what your skill level, there is fun for all, such is the diversity of our great hobby.

[@thrillscience]

Such a beautiful transmitter! Thanks for the video.

[@cindys1819]

I have a Globe 300 it was a product of WORLD RADIO LABS of Council Bluffs Iowa One of THE Big Ham Radio sellers in the late 40's and 1950's and they were SO Big that they decided to put out their own line of Transmitters 😅 which basically competed with the Johnson Viking and Ranger transmitters. WRL is just one of the great names of the Ham radio history's Golden Domestic built gear era. Wonderful memories......

[@wa4aos]

One of the wisest statements you have made, "back in the 50's an era when people took responsibility for their own actions" So very true and a lesson many should learn from. Those were the days when NO ONE would buy a wire antenna and many of us built at least 1 transmitter, feedline, our antenna relay boxes and we repaired our receivers. We depended on the elder Ops in our community for advice and parts if they had them. No hand holding and no cottling. When we were old enough to go off to college and exams came, our professors didn't bring kittens or Lama's to help us cope with the stress. You either passed your exams or repeated the courses; no excuses either way. What has happened over the last 50 years??? Not saying all of the latest generation are wimps, certainly NOT. However way too many are.. I'd vote for modding the xmitter as well. I would not be surprised to see audio improvements byt trashing the 2 RC packs in the audio path. It would also be interesting to look at the signal on a spectrum analyzer and see if improvements could be made to improve the second harmonic radiation. 73, Glenn WA4AOS

[@frigglebiscuit7484]

id rather live in the present time than back then, even with the problems of today. its nice to not have to shoot/kill people trying to assault/murder me because im gay.

[@sincerelyyours7538]

Fascinating video, thanks for this look at this fine old Globe Scout transmitter. I definitely would like to see you modify it as you described. Am also looking forward to your de-potting video.

[@joshshine2489]

Yep! Definitely like to see the follow up mods. Thank you for your content!!

[@J3715]

LOL I think this is the first Mr Carlson video I have seen where someone already had the gear recapped!

[@patprop74]

YAYE finally something worth watching on "the KZbin" im always happy to see you posting a new video.

[@ZeedijkMike]

Always a pleasure to see a new video from you. Your detailed information about every part of the equipment nearly gives me goosebumps (-;

[@jimgardner3255]

Well done, Mr. C! Love all your content, but the "ham-centric" videos are the best! Yes, would enjoy seeing you tune up the Globe Scout. Thanks OM!

[@nathanas64]

Love these videos! Highly educational and interesting for a electronics enthusiast

[@msaradio7455]

I'm very happy to see this Paul, I have been waiting :), and wow, what a responce already, lots of likes and comments. I can't wait for more of these tx'ers! and come on, every one has to love WRL! 73 Paul, really enjoyed this one..

[@phillascelles3576]

When tuning a pi tank you tune for a dip it will a big one at first then open the load cap to bring it out of dip, re dip this time it will be smaller and output power will increase keep repeating this process until you get the smallest dip this will be the maximum power Phil

[@anthonyvolkman2338]

Excellent! Yes I want to see more! I work on CBs right right now.

[@thomasgodlewski1943]

Great video as always. I'm looking forward to seeing what you do with this transmitter.

[@no_more_free_nicks]

Mr Carlson, you are a celebrity!

[@kardeef33317]

Safe mods to the equipment are always great.